Quantities, Units, and Measured Numbers
Course Overview and Learning Objectives
Course Identification: ELECTRICITY 1 (ELEC1131) – Theory Class (CRN 13082), Durham College, School of Engineering Technology (SET).
Textbook Reference: Principles of Electric Circuits: Conventional Current, 10th Edition, authored by Thomas L. Floyd and David M. Buchla.

Required Course Materials:
Course textbook (used over 2 semesters).
Scientific calculator: Casio fx-991ES-PLUS C (utilized across the entire program).
ELEC1131 toolkit (utilized across the entire program).
Delivery Schedule:
Online Theory Lectures: Mondays from to and Thursdays from to .
Chapter 1 Outline:
1–1: Units of Measurement
1–2: Scientific Notation
1–3: Engineering Notation and Metric Prefixes
1–4: Metric Unit Conversions
1–5: Measured Numbers
Core Learning Objectives:
Discuss and define the International System of Units () standard.
Utilize scientific notation (powers of ) to represent physical quantities.
Apply engineering notation and metric prefixes to represent very large and very small quantities.
Convert parameters between different metric prefixes.
Express experimental and measured data with the correct number of significant digits.
Key Terminology:
Scientific Notation
Engineering Notation
Exponents
Powers of
Metric Prefixes
Error
Accuracy
Precision
Significant Digits
Rounding Off
Calculator Use
Base and Derived Measurement Units
International System of Units ():
Established internationally in the year .
Refined continuously through modernized international standards.
Serves as the universal standard for all scientific and engineering disciplines.
The Seven Fundamental Base Units:
Length: Meter (, unit symbol: )
Mass: Kilogram (, unit symbol: )
Time: Second (, unit symbol: )
Electric Current: Ampere (, unit symbol: )
Temperature: Kelvin (, unit symbol: )
Luminous Intensity: Candela (, unit symbol: )
Amount of Substance: Mole (, unit symbol: )
Fundamental and Derived Electrical Quantities:
Current is the fundamental electrical base unit (, symbol: ).
All other electrical and magnetic units are derived from the fundamental base units.
Electric Current: Unit is Ampere (, symbol: )
Electric Charge: Unit is Coulomb (, symbol: )
Voltage: Unit is Volt (, symbol: )
Resistance: Unit is Ohm (, symbol: )
Power: Unit is Watt (, symbol: )
Derived Magnetic Quantities and Units (Detailed in Chapter 10):
Magnetic field intensity: Symbol is ; Unit is Ampere-turns/Meter; Unit symbol is
Magnetic flux: Symbol is ; Unit is Weber; Unit symbol is
Magnetic flux density: Symbol is ; Unit is Tesla; Unit symbol is
Magnetomotive force: Symbol is ; Unit is Ampere-turn; Unit symbol is
Permeability: Symbol is ; Unit is Webers/ampere-turns-meter; Unit symbol is
Reluctance: Symbol is ; Unit is Ampere-turns/weber; Unit symbol is
Scientific Notation
Definition and Structure:
A standardized method for expressing very large and very small quantities in compact form.
Defined mathematically as a product of a real coefficient number between and multiplied by a power of :
Where and is a positive or negative integer exponent.

Operational Rule: " number dot" (exactly one non-zero digit placed directly to the left of the decimal point).
Standard Examples:
Positive and Negative Powers of Ten:
Positive exponents:
Zero exponent:
Negative exponents:
Conversion Examples (Decimal to Scientific Notation):
Example 1:
Example 2:
Example 3:
Example 4: (represented as in unnormalized power form)
Example 5:
Example 6:
Arithmetic Operations in Decimal and Scientific Form:
Example 1a:
Example 1b:
Example 2a:
Example 2b:
Example 3a:
Example 3b:
Engineering Notation and Metric Prefixes
Definition of Engineering Notation:
A variation of scientific notation tailored for technical engineering disciplines.
The coefficient must contain from to digits to the left of the decimal point ().
The base- exponent must strictly be a multiple of ().

Operational Rule: "Groups of " (moving decimal points in sets of three digit places).
Comparative Summary:
Value:
Scientific Notation:
Engineering Notation:
Value:
Scientific Notation:
Engineering Notation:
Value:
Scientific Notation:
Engineering Notation:

Engineering Metric Prefixes for Large Numbers ():
Peta: Prefix Symbol , Multiplier
Tera: Prefix Symbol , Multiplier
Giga: Prefix Symbol , Multiplier
Mega: Prefix Symbol , Multiplier
kilo: Prefix Symbol (or ), Multiplier
Base Unit: Multiplier
Engineering Metric Prefixes for Small Numbers ():
Base Unit: Multiplier
milli: Prefix Symbol , Multiplier
micro: Prefix Symbol , Multiplier
nano: Prefix Symbol , Multiplier
pico: Prefix Symbol , Multiplier
femto: Prefix Symbol , Multiplier
Scientific Calculator Implementation (Casio fx-991ES-PLUS C)
Hardware Features:
Supported generations: 1st Generation and 2nd Generation Casio fx-991ES PLUS / fx-991ES-PLUS C series.
Features Natural-V.P.A.M. display and dedicated keys for technical exponents and notations.

Key Input Identifiers:
Power-of-ten entry key:
[x10^x](located in the bottom row, equivalent to traditional[EXP]).Negative sign entry key:
[(-)](used specifically for negative exponents and signs, distinct from the subtraction operator).Engineering conversion key:
[ENG](converts displayed answers directly to powers of that are multiples of ).
Converting a Decimal Number to Scientific Notation Mode:

Step 1: Turn the calculator on via
[ON].Step 2: Press the
[SHIFT]key.Step 3: Press the
[MODE SETUP]key.Step 4: Select menu option
7: SCI.Step 5: When prompted with
SCI 0~9?, select the desired precision (typically input7or8to set the count of retained significant digits).Converting a Decimal Number to Engineering Notation:

Step 1: Turn the calculator
[ON]and enter the numeric value or calculation.Step 2: Press
[=]to evaluate the expression.Step 3: Press the
[ENG]button to shift the decimal value into standard engineering prefix multiples.
Metric Conversions and Mathematical Operations
Directional Conversion Rules:
Larger Unit to Smaller Unit:
Move the decimal point to the right.
When unit magnitude decreases, the numeric value increases.
Example: Converting to kilowatt:
Smaller Unit to Larger Unit:
Move the decimal point to the left.
When unit magnitude increases, the numeric value decreases.
Example: Converting to microfarads ():
Addition and Subtraction Rule for Metric Quantities:
Always convert numbers to identical metric prefixes (like units) prior to carrying out addition or subtraction.
Example 1 (Watt and Kilowatt):
Evaluation:
Method A (Converting to base Watts):
Method B (Converting to Kilowatts):
Example 2 (Milliampere and Ampere):
Evaluation:
Method A:
Method B:
Common Pitfalls in Electrical Metric Calculations:
Common error scenario: Adding values with mismatched prefixes without conversion (, which is incorrect).
Correct calculator line entry:
Calculator Line Entry Application:
Problem:
Base conversion:
Engineering entry:
Measured Numbers: Error, Accuracy, and Precision
Nature of Measurement: Data recorded during physical and laboratory experiments are never completely exact; every measured parameter incorporates a degree of uncertainty.
Error: Defined explicitly as the difference between the true (theoretical) value and the measured value:
Accuracy:
An indicator of the magnitude of error.
Reflects how closely an individual measured reading approximates the true or accepted standard value.
Governed by calibration, instrument limitations, and physical testing conditions.
Precision:
A measure of repeatability and consistency among repeated trials.
Signifies how tightly clustered multiple independent measurements are to each other under unchanged test parameters, regardless of whether they are close to the true value.
Significant Digits
Reporting Criterion: Electronic instruments inherently contain error; only digits that are reasonably assumed to be accurate and certain should be reported.
Rules for Determining Significant Digits:
Rule 1: Nonzero digits are always significant.
Example: contains significant digits.
Rule 2: Zeros to the left of the first nonzero digit are never significant.
Example: contains significant digits ().
Rule 3: Zeros located between nonzero digits are always significant.
Example: contains significant digits.
Rule 4: Zeros to the right of the decimal point in a decimal number are always significant.
Example: contains significant digits.
Rule 5: Zeros to the left of the decimal point in a whole number may or may not be significant depending on the measuring instrument.
Example: contains at least significant digits, but the exact count remains ambiguous without clear exponential notation.
Rounding Off Numbers
Principles of Rounding:
Rounding drops one or more digits situated to the right of the last significant digit.
Stated results should retain the known significant digits plus no more than one uncertain digit.
The quantity of retained digits provides a direct indicator of the precision of the experimental measurement.

Standard Institutional Rounding Rules (Durham College SET Standard):
Rule #1: If the Most Significant Digit () dropped is or greater (), increase the last retained digit by .
Rule #2: If the Most Significant Digit () dropped is or less (), leave the last retained digit unchanged.
Rule #3: The round-to-even accounting convention is omitted within the Durham College School of Engineering Technology (SET).
Rule #1 Worked Examples ():
Example A: Round to significant digits: Last retained digit is , dropped digit is ()
Example B: Round to significant digits: Last retained digit is , dropped digit is ()
Example C: Round to significant digits: Last retained digit is , dropped digit is ()
Example D: Round to significant digits: Last retained digit is , dropped digit is ()
Example E: Round to significant digits: Last retained digit is , dropped digit is ()
Example F: Round to significant digits: Last retained digit is , dropped digit is ()
Example G: Round to significant digits: Last retained digit is , dropped digit is ()
Example H: Round to significant digits: Last retained digit is , dropped digit is ()
Rule #2 Worked Examples ():
Example A: Round to significant digits: Last retained digit is , dropped digit is ()
Example B: Round to significant digits: Last retained digit is , dropped digit is ()
Example C: Round to significant digits: Last retained digit is , dropped digit is ()
Example D: Round to significant digits: Last retained digit is , dropped digit is ()
Example E: Round to significant digits: Last retained digit is , dropped digit is ()
Example F: Round to significant digits: Last retained digit is , dropped digit is ()
Example G: Round to significant digits: Last retained digit is , dropped digit is ()
Example H: Round to significant digits: Last retained digit is , dropped digit is ()
Assigned Practice and Homework Problems
Textbook Reading Assignment: Thoroughly read Chapter 1 of Principles of Electric Circuits.
Assigned Chapter 1 Exercises:
Sections 1–2 through 1–5: Questions to inclusive (starting on textbook page ).
Chapter 2 Supplemental Reading: Review Section Summary starting on page , including Figure 2-65 (Schematic Symbols).
Review Key Terms: Pages and .
Review Formulas: Page .
True/False Review: Page , Questions through (solutions provided on page ).
Self-Test Exercises: Pages and , Questions through (solutions provided on page ).
Problems and Questions: Pages to , all odd-numbered problem sets (solutions located in the textbook appendix).