Fluid Dynamics: Drag, Lift, Streamlined Bodies, and Magnus Effect
Forces Exerted by Fluid Flow on a Body
Total Dynamic Force: When a fluid flows around a submerged body, the fluid exerts a resultant force on the body surface due to the normal pressure distribution and surface shear stress distribution.
Drag Force (): The component of the force exerted by the fluid on a body that acts parallel to the direction of fluid flow.
Lift Force (): The component of the force exerted by the fluid on a body that acts perpendicular to the direction of fluid flow.
Resolution of Fluid Forces and Derivation of Drag and Lift
Consider a small elemental surface area on a body placed in a fluid stream flowing with a uniform free-stream velocity .
Elemental Forces Acting on :
Normal Pressure Force: , acting inward and normal to the surface.
Shear Force (Skin Friction): (\tau_0 \, dA), acting tangentially along the surface, where is the wall shear stress.
Let be the angle made by the normal to the elemental surface with the direction of fluid flow.
Drag Force Resolution ()
Resolving forces parallel to the direction of fluid flow:
Normal pressure force component in flow direction:
Shear force component in flow direction:
Integrating these components over the entire surface area yields the total Drag Force ():
Components of Total Drag Force:
Pressure Drag (Form Drag):
Resulting from the pressure difference between the upstream (front) and downstream (rear) sides of the body.
Viscous Drag (Skin Friction Drag):
Resulting from viscous shear stresses developed within the fluid boundary layer along the surface.
Profile Drag:
Lift Force Resolution ()
Resolving forces perpendicular to the direction of fluid flow (upward vs. downward force balance):
Upward shear force component:
Downward normal pressure force component:
Integrating these components over the entire surface area yields the total Lift Force ():
Drag Coefficient and Governing Variables
Drag Coefficient ():
A dimensionless parameter defined as the ratio of total drag force to dynamic pressure force:
Expressed in force form:
Parameters:
= Total drag force
= Fluid mass density
= Free-stream velocity
= Plan area (projected frontal area)
Functional Dependencies:
The drag coefficient is a function of geometric orientation, shape, surface roughness, and Reynolds Number ():
Additional Drag Classifications
Induced Drag: Drag force generated directly due to the creation of lift (e.g., wing-tip vortex formation).
Wave Drag: Drag force created by surface wave generation (e.g., water waves generated by ship hulls moving across fluid interfaces).
Fluid Mechanics of Spherical Bodies
For a spherical body of diameter moving at a constant velocity (terminal velocity) through a fluid with dynamic viscosity :
Total Drag Force () (Stokes' Law):
Skin Friction Drag Component:
Pressure Drag Component:
Reynolds Number () Expression:
Drag Coefficient for Spheres in Laminar Flow ():
Streamlined Bodies versus Bluff Bodies
Streamlined Body:
Definition: A body whose outer contour coincides with the fluid streamlines, suppressing boundary layer separation.
Separation Point: Boundary layer separation is delayed, occurring only at the extreme rear end.
Wake: Minimum wake formation behind the body.
Pressure Drag: Reduced to a minimum. For a theoretical streamlined body, pressure drag equals zero.
Skin Friction Drag: Maximum relative component of total drag.
Minimization Strategy: Skin friction drag can be minimized by surface smoothing or polishing.
Bluff Body:
Definition: A body whose physical shape does not coincide with the fluid streamlines.
Separation Point: Early flow separation occurs along the top and bottom surfaces.
Wake: Maximum wake region formation.
Pressure Drag: Maximum relative component of total drag, dominating over skin friction.
Magnus Effect and Cylinder Aerodynamics
Magnus Effect:
Generation of an automatic lift force () on a rotating cylinder or sphere immersed in a moving fluid stream.
Physical Mechanism:
Side with Streamwise Motion: Fluid velocity increases (), causing local pressure to decrease () according to Bernoulli's principle.
Side Opposing Motion: Fluid velocity decreases (), causing local pressure to increase ().
Transverse Force: The net pressure difference between the high-pressure and low-pressure sides produces an automatic transverse lift force.
Reference Standard: Drag on Cylinder reference listed in R.K. Bansal, Page 709.