Study Notes on Fluid Dynamics, Density, and Pressure Systems

The Particle Model of Matter and States of Matter
  • The Particle Model of Matter (Particle Theory):

    • All matter is composed of tiny particles.

    • All particles in a pure substance are identical; different pure substances have different particles.

    • Spaces exist between all particles.

    • Particles are in continuous motion; speed increases when heated and decreases when cooled.

    • Particles exert attractive forces on one another, depending on particle type.

  • Properties of the States of Matter:

    • Solids: Definite shape and definite volume. Particles are tightly packed and vibrate in place. Solids form piles when poured because particles do not flow freely.

    • Liquids: Definite volume, but no definite shape (conforms to container). Particles have enough energy to slide past one another. Liquids flow to the lowest level and rest flat.

    • Gases: No definite shape and no definite volume (expands to fill space). Particles possess high energy and large gaps, moving randomly in all directions.

  • Changes of State:

    • Driven by the gain or loss of thermal energy.

    • Melting (Fusion): Solid to liquid (energy gained).

    • Freezing (Solidification): Liquid to solid (energy lost).

    • Vaporization: Liquid to gas (energy gained).

    • Condensation: Gas to liquid (energy lost).

    • Sublimation: Direct change between solid and gas, bypassing liquid phase.

Classification and Properties of Matter
  • Broad Classification:

    • All matter is classified as either a pure substance or a mixture.

  • Pure Substances:

    • Consist of only one type of particle with uniform, constant properties across all states.

    • Elements: Cannot be chemically broken down into simpler substances (e.g., iron, gold, oxygen).

    • Compounds: Two or more elements chemically combined in fixed ratios (e.g., water, salt, sugar).

  • Mixtures:

    • Physical combinations of two or more pure substances, each keeping its unique properties.

    • Homogeneous Mixtures (Solutions): Look like a single uniform substance. Particles intermingle completely without settling out (e.g., vinegar, clear air).

    • Heterogeneous Mixtures (Mechanical Mixtures): Two or more visible phases. Particles stay clustered together, leaving individual properties visible (e.g., soil, blood, concrete).

  • Intermediate Heterogeneous Mixtures:

    • Suspensions: Particles stay suspended temporarily but settle out slowly over time (e.g., orange juice with pulp).

    • Colloids: Fine particles remain suspended indefinitely without settling (e.g., fog).

    • Emulsions: Stable colloids using an emulsifying agent to keep immiscible liquids dispersed (e.g., mayonnaise).

Dissolving, Solubility, and Solutions
  • Mechanics of Dissolving:

    • Dissolving: Mixing substances to create a solution. Occurs when attraction between solute and solvent particles is stronger than attraction within the solute itself.

    • Solute: The substance being dissolved.

    • Solvent: The substance doing the dissolving (both can be liquids or gases).

    • Soluble vs. Insoluble: Soluble substances dissolve in a given solvent; insoluble substances do not.

  • Solubility and Saturation:

    • Solubility: Maximum amount of solute that dissolves in a given solvent volume at a specific temperature.

    • Saturated Solution: Contains maximum dissolved solute at that temperature; attractive forces are balanced.

    • Unsaturated Solution: Capable of dissolving more solute at that temperature.

    • Supersaturated Solution: Unstable state holding more dissolved solute than normal for that temperature.

  • Factors Affecting Dissolving Rate:

    • Agitation: Stirring or shaking increases particle contact.

    • Temperature: Heat boosts kinetic energy and creates more space between solvent particles.

    • Pressure: Changes particle interactions (especially when dissolving gases in liquids).

  • Water and Specialized Solvents:

    • Water is the "universal solvent" because it dissolves a wide range of substances.

    • Global water distribution: 97%97\% oceans, 2%2\% glaciers/ice sheets, and approximately 0.5%0.5\% usable freshwater.

    • Insoluble stains require specialized solvents with strong particle attraction (e.g., rubbing alcohol dissolves chlorophyll in grass stains).

Viscosity and Flow Rate
  • Core Principles:

    • Viscosity: A fluid's internal resistance to flow (thickness).

    • Flow Rate: Speed of a fluid, measured as the time required to travel a set distance.

  • Temperature Effects:

    • In Liquids: Heating weakens attractive forces, causing viscosity to decrease (flows faster); cooling increases viscosity (flows slower).

    • In Gases: Heating increases particle speed and collision rate, causing viscosity to increase; cooling decreases viscosity.

  • Applications:

    • Cosmetics: Solvents keep nail polish and mascara flowing during application, then evaporate.

    • Paints and Strippers: Strippers are formulated as viscous gels to cling to vertical surfaces without dripping.

    • Food: Viscosity determines the marketable texture of candies, sauces, and gravies.

    • Automotive: Motor oil viscosity is adjusted for summer and winter temperatures.

Mass, Volume, and Density
  • Key Quantities:

    • Mass: Amount of matter (number of particles) in an object.

    • Volume: Space occupied by matter.

    • Capacity: Maximum matter or volume a container can hold.

    • Weight: Downward gravitational force exerted on mass.

    • Force: A push or pull altering motion.

    • Gravity: Attraction pulling objects toward Earth's centre.

  • Density Principles:

    • Density: Mass per unit volume:     Density=MassVolume\text{Density} = \frac{\text{Mass}}{\text{Volume}}     D=mVD = \frac{m}{V}

    • Remains constant for pure substances at constant temperature and pressure.

    • Heating increases volume, thereby lowering density.

    • Water Anomaly: Freezing causes liquid water to expand, making solid ice less dense than liquid water, allowing it to float.

Buoyancy and Average Density
  • Buoyant Force:

    • Buoyancy: Upward force exerted by a fluid on an immersed object, measured in Newtons (NN).

    • Acts in direct opposition to gravity ("anti-gravity force").

    • Floating: Happens when buoyant force balances the object's downward weight.

  • Average Density:

    • Defined as:     Average Density=Total mass of all enclosed substancesTotal volume of the object\text{Average Density} = \frac{\text{Total mass of all enclosed substances}}{\text{Total volume of the object}}

    • Distributing mass over a large volume lowers average density below fluid density, allowing heavy objects to float.

    • Applications:

    • Ships: Steel hulls enclose large air compartments to lower overall average density below water.

    • Fish: Fill or empty internal swim bladders with air to control buoyancy.

    • Submarines and Blimps: Take in or expel ballast (water in submarines, gas in blimps) to dive or ascend.

Fluid Pressure
  • Formula and Units:

    • Distribution of force over an area:     P=FAP = \frac{F}{A}

    • Force is in Newtons (NN), area in square metres (m2m^2), and pressure in Pascals (PaPa), where 1000 Pa=1 kPa1000\,Pa = 1\,kPa.

  • Compressibility:

    • Gases: Compressible due to large spaces between particles. Requires a sealed container, remaining inter-particle space, and external applied force.

    • Liquids and Solids: Incompressible because particles are already tightly spaced; applied forces are transmitted throughout the substance rather than compressed.

Atmospheric Pressure and Pressure Dynamics
  • Atmospheric Pressure:

    • Weight of the atmospheric air column extending roughly 160 km160\,km upward.

    • Decreases as altitude increases because fewer gas particles are present.

    • Differences between inner ear pressure and outside air cause ear "popping" during rapid elevation changes.

  • Dynamics and Engineering:

    • Measured with a barometer using a balanced column of mercury.

    • Unbalanced Forces: If external atmospheric pressure exceeds internal pressure, thin-walled vessels collapse (e.g., plastic soda bottles buckle when emptied, whereas rigid glass resists).

    • Area and Pressure: Wide ATV tires and cushioning materials distribute force over broader areas, reducing applied pressure.

Fluid Power Technologies: Hydraulic and Pneumatic Systems
  • Hydraulic Systems:

    • Transmit applied force through an enclosed, continuous liquid.

    • Applied force creates pressure that is transmitted instantaneously and equally in all directions.

    • Pumps apply input force; valves direct flow and release pressure.

  • Pneumatic Systems:

    • Transmit power using compressed gases.

    • Compressors draw in and squeeze air to build high pressure.

    • Decompression allows particles to expand rapidly, generating strong mechanical force for heavy work.