Chapter 8 Readings: 8.4 Potential Energy Diagrams and Stability
Page 1: Potential Energy Diagrams and Vertical Free Fall
Potential energy diagrams provide a powerful graphical method to extract comprehensive dynamical information about mechanical systems. In a one-dimensional system, the potential energy can be plotted as a function of position on a two-dimensional graph. For multi-dimensional systems, motion occurs across three-dimensional space, requiring more complex representations; thus, analytical procedures are predominantly formulated for one-dimensional motion.
Learning Objectives
Create and interpret graphs of potential energy.
Explain the direct mathematical and physical connection between stability and potential energy.
Vertical Free Fall Near Earth's Surface
For an object falling vertically under the influence of gravity near Earth's surface in the absence of air resistance, mechanical energy is conserved:
Defining the gravitational potential energy reference level such that potential energy is zero at ground level (), the potential energy function is:
This function represents a linear graph passing through the origin (, ) with a constant positive slope equal to the object's weight .

In the potential energy graph:
The horizontal axis denotes the height above the ground in meters ().
The vertical axis denotes the total energy in joules ().
The constant total mechanical energy of the system is shown as a horizontal line at energy level .
At any arbitrary height , the total energy is divided into a potential energy component and a kinetic energy component , such that .
Page 2: Kinetic Energy Limits, Turning Points, and Horizontal Mass-Spring Systems
Energy Bounds and Turning Points in Vertical Fall
Because kinetic energy depends on the square of speed (), it can never take on a negative value. This fundamental physical constraint establishes a limit on the potential energy and allowable position of the object:
Substituting the gravitational potential energy expression with the ground-level reference point yields:
At the maximum height , all mechanical energy exists entirely as potential energy (), meaning the kinetic energy is zero () and the instantaneous speed is zero (). If the object is moving upward, its velocity passes through zero at this location. Consequently, serves as a turning point where the direction of motion reverses.
At ground level (), the potential energy reaches its baseline:
Solving for the velocity at ground level yields:
Here, represents the initial upward launch velocity necessary to reach the maximum altitude , whereas denotes the downward impact velocity attained upon returning to ground level after falling from .
The Horizontal Mass-Spring System
Consider an ideal horizontal mass-spring assembly consisting of a glider between springs mounted on a frictionless, stationary horizontal surface or air track. Because the normal contact force and the gravitational force act strictly perpendicular to the displacement, they perform zero work and are excluded from the mechanical energy balance.
Choosing the equilibrium unstretched position of the spring () as the zero-potential energy reference point, the elastic potential energy function is:
where is the spring constant. The mechanical energy is conserved and constant throughout the motion.
Page 3: Potential Wells, Restoring Forces, and Stability Analysis
Analysis of the Elastic Potential Energy Well
Because the spring potential energy describes a variable force, its potential energy diagram provides broader dynamical insights than the linear diagram of constant gravitational acceleration. Applying the kinetic energy condition defines the boundaries of motion:
At the turning points, kinetic energy vanishes () and potential energy reaches its peak allowable value ():
The motion of the glider is strictly confined to the spatial domain between these two symmetric turning points:
Because the parabolic potential increases without upper bound as , this confinement applies to any arbitrary positive value of total energy . Therefore, this potential profile is classified as an infinite potential well.
At the bottom of the well ():
Force and Stability from Derivative Relations
In a conservative one-dimensional system, the net force acting on the particle is equal to the negative spatial derivative (negative slope) of the potential energy diagram:
For the spring system, the net force is proportional to acceleration ():
Equilibrium Point (): At , the slope of the curve is zero (). Consequently, the net force and the instantaneous acceleration are zero (, ).
Stable Equilibrium: When the displacement shifts to either side of , the negative slope produces a force directed toward the equilibrium point ( pointing opposite to displacement). A force that directs a displaced particle back toward equilibrium is called a restoring force, and the associated position is a stable equilibrium. A stable equilibrium corresponds mathematically to a local/relative minimum of , where:
Unstable Equilibrium: If the force on either side of an equilibrium point acts in the same direction as the position displacement (pointing away from the equilibrium point), the position is an unstable equilibrium. An unstable equilibrium corresponds mathematically to a local/relative maximum of , where:
Page 4: Quartic and Quadratic Potential Energy Diagrams (Example 8.10 Formulation)
Problem Formulation
A particle moves along the -axis in one dimension under the conservative potential energy function:
where is in joules () and is in meters (). The particle is subject to no non-conservative forces, maintaining a constant mechanical energy of:
Determine whether the motion of the particle is confined to specific regions on the -axis, and calculate those boundaries.
Locate all equilibrium points and determine whether each is stable or unstable.
Analytical Strategy
First, analyze the shape of the potential function :
At the origin (), .
For , the quadratic term is larger in magnitude than the quartic term , making negative.
For sufficiently large values of (), , causing to grow positively.
The zeros of the potential are found by setting :
This function forms a symmetric double potential well with a local central peak at the origin and two troughs on either side.
The dynamically allowed regions satisfy the criterion that kinetic energy cannot be negative ( or ).
Equilibrium positions occur where the first derivative vanishes (). Stability is verified by the sign of the second derivative ( for stable relative minima; for unstable relative maxima).
Page 5: Allowed Regions and Stability Calculations (Example 8.10 Solution)
Part (a) Solution: Allowed Regions for Motion
To find the spatial limits for , apply the condition that kinetic energy is non-negative:
Rewrite and complete the square for :
Taking the square root across the inequality:
Evaluating the numerical bounds using :
This inequality defines two distinct, disjoint allowed regions of oscillation along the -axis:
where and .
Part (b) Solution: Equilibrium Points and Stability
Equilibrium occurs where the first derivative of equals zero:
This yields three critical points:
To evaluate stability, compute the second spatial derivative:
At :
Because the second derivative is negative, is a relative maximum of potential energy. The equilibrium at the origin is unstable.
At , where :
Because the second derivative is positive, these locations correspond to relative minima of potential energy. The equilibria at are stable.
Significance and Energy Confinement
The particle oscillates within one of the two allowed potential wells around either stable point ( or ). Because its mechanical energy () is strictly less than the potential barrier at the origin (), the particle cannot cross between wells and remains confined to whichever well it occupies initially.
Check Your Understanding 8.10
Repeat Example 8.10 when the particle's mechanical energy is changed to .
Page 6: Sinusoidal Oscillations and Position as a Function of Time (Example 8.11)
Time-Dependent Motion from Potential Energy
Potential energy relationships enable the direct derivation of position as a function of time, . For a particle moving with constant mechanical energy in a harmonic potential , starting from rest at time :
Strategy
Express time as an integral of position using the velocity relation derived from conservation of energy:
Analytical Solution
Factoring out the constant yields standard inverse trigonometric integration:
Apply the initial conditions at :
The particle starts from rest, so initial kinetic energy is zero ().
The entire mechanical energy resides in potential energy: .
Therefore, the initial displacement satisfies:
Evaluating the inverse sine of :
Substituting this back into the integral equation:
Inverting the sine function gives :
Using the trigonometric identity :
Significance of Simple Harmonic Motion
A mass-spring system governed by a quadratic potential executes sinusoidal harmonic oscillations characterized by:
Amplitude (): The maximum physical displacement from equilibrium:
Oscillation Frequency (): The cyclic rate of oscillation per second:
Angular Frequency (): The intrinsic oscillation parameter: