Comprehensive Physics Study Guide: Mechanics, Energy, and Circuits

Weight and Mass Fundamentals

  • Weight (FgF_g): Defined as the force of gravity acting on an object.
    • The formula for weight is Fg=m×gF_g = m \times g.
    • The constant for gravitational acceleration on Earth is g=9.8 m/s2g = 9.8\,m/s^2.
  • Mass: Measured in kilograms (kgkg).
    • Conversion factor: 1000 g=1 kg1000\,g = 1\,kg.

Motion and Energy of a Projectile Thrown Upwards

  • Scenario: Analyzing a ball thrown vertically upwards in terms of velocity, acceleration, and energy changes through five points of its trajectory (Point 1 at launch to Point 5 at landing).
  • Velocity (vv):
    • As the ball moves upward from Point 1, the positive velocity (+v+v) is decreasing.
    • At the peak (Point 3), the velocity is zero (v=0v = 0).
    • At the bottom points (1 and 5), the velocity is at its maximum (vmaxv_{max}).
  • Acceleration (aa):
    • The acceleration is constant throughout the flight.
    • It is always directed downwards: a=−9.8 m/s2a = -9.8\,m/s^2.
  • Energy Distribution:
    • At Launch/Landing (Points 1 and 5): If height h=0h = 0, Potential Energy (PEPE) is 0%0\%. Kinetic Energy (KEKE) is at its maximum (KE=100%KE = 100\%).
    • Mid-flight (Points 2 and 4): The energy is split equally between the two forms: 50% PE50\%\,PE and 50% KE50\%\,KE.
    • At the Peak (Point 3): Kinetic energy is zero (KE3=0KE_3 = 0) because velocity is zero. Potential Energy is at its maximum (PE3=100%PE_3 = 100\%).
  • Potential Energy Formula: PE=m×g×hPE = m \times g \times h.

Free Body Diagrams (FBD)

  • Objects Moving at Constant Velocity (vv):
    • Moving to the right: Forces are balanced. Normal force (FNF_N) equals weight (FgF_g). Applied force (FAF_A) equals frictional force (FfF_f).
    • Moving upwards: Applied force equals weight (FA=FgF_A = F_g).
  • Objects Accelerating (aa):
    • Accelerating to the right: The applied force is greater than the frictional force (FA>FfF_A > F_f).
    • Accelerating upwards: The applied force is greater than the weight (FA>FgF_A > F_g).

Vectors and Scalars

  • Vectors (Values with direction):
    • Displacement (dd)
    • Velocity (vv)
    • Acceleration (aa)
    • Net Force (FnetF_{net}, which determines if an object is speeding up or slowing down)
    • Impulse (JJ)
    • Momentum (pp)
  • Scalars (Magnitude only):
    • Energy
    • Work
    • Power
    • Speed

Newton's Third Law and Collisions

  • Newton's 3rd Law in Collisions: During a collision, the forces between two objects are opposite and equal (F1=−F2F_1 = -F_2).
  • Recoil: The backward movement or reaction an object experiences during a collision or release of force.

Momentum and Impulse

  • Impulse (JJ): The product of the net force and the time interval during which it acts.
    • Formula: Impulse=Fnet×Δt=ΔpImpulse = F_{net} \times \Delta t = \Delta p.
  • Change in Momentum (Δp\Delta p):
    • Δp=pf−pi\Delta p = p_f - p_i
    • Δp=m×vf−m×vi\Delta p = m \times v_f - m \times v_i

Energy, Work, and Power Calculations

  • Kinetic Energy (KEKE): Requires mass (mm) and speed (vv).
    • Formula: KE=12×m×v2KE = \frac{1}{2} \times m \times v^2.
    • Units: J=kg×(m/s)2J = kg \times (m/s)^2.
  • Potential Energy (PEPE): Requires mass (mm), gravity (gg), and height (hh).
    • Formula: PE=m×g×hPE = m \times g \times h.
    • Units: J=kg×(9.8 m/s2)×m=kg×m2/s2J = kg \times (9.8\,m/s^2) \times m = kg \times m^2/s^2.
  • Work (WW): Requires force (FF) and distance (dd).
    • Formula: W=F×dW = F \times d.
    • Units: 1 J=1 N×m1\,J = 1\,N \times m.
    • Conditions for Work: The force must be parallel to the direction of movement. If you do not move (d=0d = 0), the work done is zero (W=0W = 0).
  • Work Done When Lifting:
    • The applied force is equal to the weight of the object (FA=FgF_A = F_g).
    • W=FA×dW = F_A \times d
    • W=Fg×vertical distanceW = F_g \times \text{vertical distance}
    • W=m×g×dW = m \times g \times d
  • Equivalent Units:
    • 1 J=1 kg×(m)2/s21\,J = 1\,kg \times (m)^2/s^2
    • 1 J=1 N×m1\,J = 1\,N \times m
  • Rate of Change: Mathematically implies division by change in time (Δt\Delta t).
    • Examples: ΔdΔt\frac{\Delta d}{\Delta t} (velocity), ΔvΔt\frac{\Delta v}{\Delta t} (acceleration), ΔpΔt\frac{\Delta p}{\Delta t} (force).

Electrical Circuits: Junction and Loop Rules

  • Junction Rule (Kirchhoff's Current Law): The current going into a junction equals the sum of the current coming out.
    • Formula: I=I1+I2I = I_1 + I_2.
  • Loop Rule (Kirchhoff's Voltage Law): The voltage supplied by the battery equals the sum of the voltage around any closed loop.
    • VB=V1+V3V_B = V_1 + V_3
    • If VB=120 VV_B = 120\,V and V3=20 VV_3 = 20\,V, then 120=V1+20120 = V_1 + 20, making V1=100 VV_1 = 100\,V.
    • Circuit components in parallel (like R1R_1 and R2R_2) have the same voltage: V1=V2V_1 = V_2.

Energy Changes in a Pendulum

  • Point A (Max Height): Kinetic Energy is zero (KEA=0KE_A = 0). Potential Energy is at maximum (PEA=100%PE_A = 100\%).
  • Mid-point: Energy is divided as 50% PE50\%\,PE and 50% KE50\%\,KE.
  • Point B (Lowest Point): Potential energy is zero (PEB=0PE_B = 0). Kinetic Energy is at maximum (KEB=100%KE_B = 100\%).

Detailed Circuit Analysis and Calculations

  • Circuit Problem: A battery (VBV_B) is connected to a resistor in series (8 Ω8\,\Omega) and a parallel network (12 Ω12\,\Omega and 6 Ω6\,\Omega).
  • Calculating Current in the Parallel Network:
    • Given: Current through the 12 Ω12\,\Omega resistor (I1I_1) is 2 A2\,A.
    • The voltage across the 12 Ω12\,\Omega resistor is V=I×R=2 A×12 Ω=24 VV = I \times R = 2\,A \times 12\,\Omega = 24\,V.
    • Because components in parallel maintain the same voltage, the voltage across the 6 Ω6\,\Omega resistor is also 24 V24\,V.
    • Current through the 6 Ω6\,\Omega resistor (I2I_2) is I2=24 V6 Ω=4 AI_2 = \frac{24\,V}{6\,\Omega} = 4\,A.
  • Total Current (II):
    • Itotal=I1+I2=2 A+4 A=6 AI_{total} = I_1 + I_2 = 2\,A + 4\,A = 6\,A.
  • Total Voltage Calculation (VBV_B):
    • Voltage across the series resistor (R=8 ΩR = 8\,\Omega) is: Vseries=I×R=6 A×8 Ω=48 VV_{series} = I \times R = 6\,A \times 8\,\Omega = 48\,V.
    • VB=Vparallel+Vseries=24 V+48 V=72 VV_B = V_{parallel} + V_{series} = 24\,V + 48\,V = 72\,V.