Quantum Numbers and Electron Configuration

Atomic Orbitals and Quantum Mechanics Basis

  • Definition of Atomic Orbitals: Based on modern quantum theory, atomic orbitals are mathematically derived regions of space around the nucleus of an atom where there are different probabilities of finding an electron.

  • Origins of Quantum Numbers: Orbitals are defined by a unique set of quantum numbers derived as solutions to the Schrödinger, Heisenberg, and Dirac wave equations.

  • Schrödinger Wave Equation Parameters: The coordinates obtained directly from Schrödinger's wave equation are the principal quantum number (nn), angular momentum quantum number (ll), and magnetic quantum number (mlm_l). These three describe the size, shape, and spatial orientation of orbitals in an atom.

  • Electron Spin: The fourth quantum number, the electron spin quantum number (msm_s), describes the direction of the electron's magnetic field rather than spatial coordinates of the orbital.

  • Bohr Model Correspondence: The principal quantum number (nn) retains the same physical interpretation in Schrödinger's equation as it possesses in the Bohr model of the atom.

  • Energy State Characterization: All four quantum numbers (nn, ll, mlm_l, msm_s) are necessary to fully define the specific energy state of an electron within an atom.

The Four Quantum Numbers

Principal Quantum Number (nn)

  • Physical Meaning: Describes the size and main energy level of an orbital.

  • Shell Designation: Principal quantum numbers correspond to main electron "shells" surrounding the nucleus.

  • Energy Level Trend: As the value of nn increases, the energy level of the electron and its distance from the nucleus increase.

Angular Momentum Quantum Number (ll)

  • Physical Meaning: Determines the shape of the electron cloud or orbital.

  • Subshell Breakdown: Each principal energy level or shell (nn) contains exactly nn subshells:

    • Principal energy level n=1n = 1 contains 1 subshell.
    • Principal energy level n=2n = 2 contains 2 subshells.
    • Principal energy level n=3n = 3 contains 3 subshells.
    • Principal energy level n=4n = 4 contains 4 subshells.
  • Allowed Values: Subshells are numbered sequentially as l=0,1,2,3,4,5,…,(n−1)l = 0, 1, 2, 3, 4, 5, \dots, (n - 1) for any given energy level nn.

  • Letter Designations: Subshells are commonly represented by letters based on the value of ll:

    • l=0→sl = 0 \rightarrow s subshell
    • l=1→pl = 1 \rightarrow p subshell
    • l=2→dl = 2 \rightarrow d subshell
    • l=3→fl = 3 \rightarrow f subshell
    • l=4→gl = 4 \rightarrow g subshell
    • l=5→hl = 5 \rightarrow h subshell
Table 5.1: Relationship Between Principal (nn) and Angular (ll) Quantum Numbers
Principal Quantum Number (nn)Angular Momentum Quantum Number (ll)Subshell Designation
11l=0l = 0ss (1 subshell)
22l=0l = 0
l=1l = 1
ss
pp (2 subshells)
33l=0l = 0
l=1l = 1
l=2l = 2
ss
pp
dd (3 subshells)
44l=0l = 0
l=1l = 1
l=2l = 2
l=3l = 3
ss
pp
dd
ff (4 subshells)

Magnetic Quantum Number (mlm_l)

  • Physical Meaning: Specifies the orientation of the atomic orbital's magnetic field or spatial orientation in three-dimensional space.

  • Allowed Values: For a given subshell ll, mlm_l can assume integer values ranging from −l-l to +l+l:

    • ml=−l,(−l+1),(−l+2),…,0,…,(l−2),(l−1),lm_l = -l, (-l + 1), (-l + 2), \dots, 0, \dots, (l - 2), (l - 1), l
  • Number of Orbitals: The total number of individual orbitals in a subshell is equal to 2l + 1$.\n\n* **sSubshell(Subshell (l = 0)**:\n * Possesses only one value of m_l((m_l = 0).\n * Represents 1 single sorbitalperprincipallevelorbital per principal leveln$.

    • Shape is spherically symmetric.

Spherically symmetric s orbitals and dumbbell p orbitals

  • pp Subshell (l=1l = 1):

    • Possesses three values of mlm_l (−1,0,+1-1, 0, +1).
    • Represents 3 distinct pp orbitals labeled as pxp_x, pyp_y, and pzp_z according to Cartesian axes in 3D space.
    • Shape is dumbbell-shaped or peanut-shaped directed along coordinate axes.
    • pp subshells exist at every principal energy level starting from n = 2$.\n\n## Electron Spin Quantum Number (m_s)\n\n* **Physical Meaning**: Describes the spin or intrinsic rotation of an electron around its axis and the direction of its magnetic field.\n\n* **Allowed Values**: m_s can only take two possible values:\n * m_s = +\frac{1}{2}:Representedbyanupward−pointingarrow(: Represented by an upward-pointing arrow (\uparrow), referred to as "spin up".\n * m_s = -\frac{1}{2}:Representedbyadownward−pointingarrow(: Represented by a downward-pointing arrow (\downarrow), referred to as "spin down".\n\n* **Capacity Rule**: Every individual sub-orbital can accommodate a maximum of two electrons, which must possess opposite spins.\n\n![Rotation of an electron around its axes illustrating spin up and spin down](https://assets.knowt.com/pdf-flow-prod/3d3e1d5d-fcac-4537-9849-c0b1e71edfce-figures/4.jpg)\n\n* **Magnetic Properties of Atoms**:\n * **Paramagnetic**: Atoms containing unpaired electrons (\uparrow\uparrow). Unpaired electrons align their spins, increasing the magnetic field of the atom. Paramagnetic atoms are **attracted** to a magnet.\n * **Diamagnetic**: Atoms in which all electrons are paired (\uparrow\downarrow). Paired electrons have unaligned/opposing spins that cancel out, resulting in no net magnetic field. Diamagnetic atoms are **repelled** by a magnet.\n\n## Relationships and Orbital Capacities\n\n![Relationship between shell, subshell, and orbital](https://assets.knowt.com/pdf-flow-prod/3d3e1d5d-fcac-4537-9849-c0b1e71edfce-figures/5.jpg)\n\n* **Formula for Orbitals per Principal Level**: The number of orbitals in energy level nisgivenbyis given byn^2$.
  • Formula for Maximum Electrons per Principal Level: The maximum number of electrons in energy level nn is given by 2n^2$.\n\n### Table 5.2: Relationship Between All Quantum Numbers and Electron Capacity\n\n| n∣|l∣SubshellDesignation∣Allowed| Subshell Designation | Allowedm_l Values | Maximum Number of Electrons |\n| :--- | :--- | :--- | :--- | :--- |\n| 1∣|0∣|1s∣|0∣|2 |\n| 2∣|0<br><br>1∣|2s<br><br>2p∣|0<br><br>-1, 0, +1∣|2<br><br>6 |\n| 3∣|0<br><br>1<br><br>2∣|3s<br><br>3p<br><br>3d∣|0<br><br>-1, 0, +1<br><br>-2, -1, 0, +1, +2∣|2<br><br>6<br><br>10 |\n| 4∣|0<br><br>1<br><br>2<br><br>3∣|4s<br><br>4p<br><br>4d<br><br>4f∣|0<br><br>-1, 0, +1<br><br>-2, -1, 0, +1, +2<br><br>-3, -2, -1, 0, +1, +2, +3∣|2<br><br>6<br><br>10<br><br>14 |\n\n# Worked Examples on Quantum Numbers\n\n### Example 5.1: Determining Orbital Notation\n\nUsing given values of nandandl, determine the corresponding orbital notation:\n* (a) n = 4, l = 0 \rightarrow 4s\n* (b) n = 2, l = 1 \rightarrow 2p\n* (c) n = 3, l = 2 \rightarrow 3d\n* (d) n = 5, l = 3 \rightarrow 5f\n\n### Example 5.2: Quantum Sets for 1sandand2s Electrons\n\nComplete quantum numbers for all electrons occupying 1sandand2s orbitals:\n\n| Electrons | n∣|l∣|m_l∣|m_s |\n| :--- | :--- | :--- | :--- | :--- |\n| 1s(1stelectron)∣(1st electron) |1∣|0∣|0∣|+\frac{1}{2} |\n| 1s(2ndelectron)∣(2nd electron) |1∣|0∣|0∣|-\frac{1}{2} |\n| 2s(1stelectron)∣(1st electron) |2∣|0∣|0∣|+\frac{1}{2} |\n| 2s(2ndelectron)∣(2nd electron) |2∣|0∣|0∣|-\frac{1}{2} |\n\n### Example 5.3: Maximum Electrons for n=2, l=1\n\n* **Problem**: What is the maximum number of electrons in an atom that can have the quantum numbers n = 2, l = 1?\n\n* **Solution**: This is the 2psubshell.Sincesubshell. Sincel = 1,,m_l = -1, 0, 1, giving 3 orbitals, each of which can hold two electrons, giving a total of 6 electrons.\n\n### Example 5.4: Maximum Electrons for n=2, l=0, m_l=0\n\n* **Problem**: What is the maximum number of electrons in an atom that can have the quantum numbers n = 2, l = 0, m_l = 0?\n\n* **Solution**: These three quantum numbers represent an orbital in the 2s subshell. Two electrons may have these quantum numbers, but their spin quantum numbers must be opposite.\n\n# Electron Configurations and Representation Methods\n\n* **Definition**: Electron configuration is a shorthand notation of the filling/occupancy of the energy levels (shells & orbitals) of an atom with electrons.\n\n* **Two Primary Representation Methods**:\n 1. spdf notation\n 2. Orbital box diagram\n\n## spdf Notation\n\n* **Structure**: Consists of a number denoting the energy level (1, 2, 3, 4, \dots),andaletterdenotingthetypeoforbital(), and a letter denoting the type of orbital (s, p, d, f).\n\n* **Superscript**: Denotes the number of electrons in those orbitals.\n\n* **Spin Exclusion**: In spdf notation, the spin of the electron is not shown.\n\n* **Filling Order**: Orbitals fill in the order of increasing energy, from lowest energy to highest energy.\n\n### Table 5.3: Examples of Elements with spdf Notation\n\n| Element | Symbol | Number of Electrons | Electron Configuration |\n| :--- | :--- | :--- | :--- |\n| Hydrogen | ext{H}∣|1∣|1s^1 |\n| Helium | ext{He}∣|2∣|1s^2 |\n| Carbon | ext{C}∣|6∣|1s^2 \, 2s^2 \, 2p^2 |\n\n## Noble-Gas-Core Notation\n\n* **Purpose**: A shorthand version of electron configuration to simplify notation for atoms with larger atomic numbers.\n\n* **Structure**: Some portion of electrons corresponding to the electron configuration of a noble gas is replaced with a bracketed chemical symbol of a noble gas.\n\n### Table 5.4: Examples of Elements with Noble-Gas-Core Notation\n\n| Element | Number of Electrons | Electron Configuration | Noble-Gas-Core Notation |\n| :--- | :--- | :--- | :--- |\n| Lithium ( ext{Li})∣) |3∣|1s^2 \, 2s^1∣|[\text{He}] \, 2s^1 |\n| Phosphorus ( ext{P})∣) |15∣|1s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^3∣|[\text{Ne}] \, 3s^2 \, 3p^3 |\n| Titanium ( ext{Ti})∣) |22∣|1s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 4s^2 \, 3d^2∣|[\text{Ar}] \, 4s^2 \, 3d^2 |\n\n### Example 5.5: Writing Noble-Gas-Core Configurations\n\nUsing noble-gas-core notation, write the electron configuration of carbon (\text{C}),magnesium(), magnesium (\text{Mg}),andsulphur(), and sulphur (\text{S})givenatomicnumbers) given atomic numbersZ(\text{C}) = 6,,Z(\text{Mg}) = 12,,Z(\text{S}) = 16:\n* Carbon ( ext{C}):):[\text{He}] \, 2s^2 \, 2p^2\n* Magnesium ( ext{Mg}):):[\text{Ne}] \, 3s^2\n* Sulphur ( ext{S}):):[\text{Ne}] \, 3s^2 \, 3p^4\n\n## Orbital Box Diagram\n\n* **Structure**: Consists of boxes representing each orbital and a half arrow representing each electron.\n\n* **Arrow Direction**: Represents the spin of the electron (upward for spin up, downward for spin down).\n\n* **Example (Oxygen with 8 Electrons)**: The orbital box configuration of oxygen (1s^2 \, 2s^2 \, 2p^4)showspairedelectrons() shows paired electrons (\uparrow\downarrow)in) in1sandand2s,andonepairedorbital(, and one paired orbital (\uparrow\downarrow)plustwosinglyoccupiedorbitals() plus two singly occupied orbitals (\uparrow,,\uparrow)in) in2p$.

Fundamental Rules for Filling Orbitals

Aufbau Principle

  • Statement: Electrons are placed in the lowest energetically available orbital first.

  • Order of Subshell Energies:   1s,2s,2p,3s,3p,4s,3d,4p,5s,4d,5p,6s,4f,5d,6p,7s,5f1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f

  • Factors Controlling Orbital Energy: For an atom containing more than one electron, different orbitals no longer have the same energy. Two factors control the energy of an orbital for most atoms: the size of the orbital and its shape.

  • Relative Subshell Energies Within a Shell: Within a given shell, the ss orbital always has the lowest energy. The energy gradually becomes larger as the angular momentum quantum number increases:   s<p<d<fs < p < d < f

Relationship between atomic orbitals and their relative energy levels

Pauli Exclusion Principle

  • Statement: No two identical electrons may occupy the same quantum state simultaneously.

  • Single Atom Condition: No two electrons in a single atom can have the same four quantum numbers. That is, if nn, ll, and mlm_l are the same, msm_s must be different such that the electrons have opposite spins.

Table 5.5: Illustration of Pauli Exclusion Principle
nnllmlm_lmsm_s
110000+12+\frac{1}{2}
110000−12-\frac{1}{2}

Hund's Rule

  • Statement: For a group of orbitals of identical energy (degenerate orbitals), electrons enter empty orbitals whenever possible. For degenerate orbitals, the lowest energy is attained when the number of electrons with the same spin is maximized.

  • Parallel Spins: Electrons in half-filled orbitals have parallel spins (same direction).

Hund's rule and correct versus incorrect electron distributions in orbital boxes

  • Key Guidelines for Orbital Box Filling:
    1. Fill empty degenerate spaces first.
    2. Ensure spins of unpaired electrons are parallel (same direction).

Quantum Numbers for Degenerate Subshells (Worked Examples)

Example 5.6: Quantum Numbers and Orbital Diagrams for 2p2p Electrons
nnllmlm_lmsm_sOrbital Box Diagram (2p2p subshell)
2211−1-1+12+\frac{1}{2}[1][ ][ ]
221100+12+\frac{1}{2}[1][1][ ]
2211+1+1+12+\frac{1}{2}[1][1][1]
2211−1-1−12-\frac{1}{2}[1L][1][1]
221100−12-\frac{1}{2}[1L][1L][1]
2211+1+1−12-\frac{1}{2}[1L][1L][1L]
Example 5.7: Quantum Numbers and Orbital Diagrams for 3d63d^6 Electrons
nnllmlm_lmsm_sOrbital Box Diagram (3d3d subshell)
3322−2-2+12+\frac{1}{2}[1][ ][ ][ ][ ]
3322−1-1+12+\frac{1}{2}[1][1][ ][ ][ ]
332200+12+\frac{1}{2}[1][1][1][ ][ ]
3322+1+1+12+\frac{1}{2}[1][1][1][1][ ]
3322+2+2+12+\frac{1}{2}[1][1][1][1][1]
3322−2-2−12-\frac{1}{2}[1L][1][1][1][1]

First-Period to Third-Period Elements Configuration

Table 5.6: Electron Configuration of Elements Hydrogen to Sodium
ElementNumber of ElectronsElectron ConfigurationOrbital Box Diagram (1s,2s,2p,3s1s, 2s, 2p, 3s)
Hydrogen, \t\text{H}111s11s^1[1] [ ] [ ] [ ]
Helium, \t\text{He}221s21s^2[1L] [ ] [ ] [ ]
Lithium, \t\text{Li}331s2 2s11s^2 \, 2s^1[1L] [1] [ ] [ ]
Beryllium, \t\text{Be}441s2 2s21s^2 \, 2s^2[1L] [1L] [ ] [ ]
Boron, \t\text{B}551s2 2s2 2p11s^2 \, 2s^2 \, 2p^1[1L] [1L] [1][ ][ ] [ ]
Carbon, \t\text{C}661s2 2s2 2p21s^2 \, 2s^2 \, 2p^2[1L] [1L] [1][1][ ] [ ]
Nitrogen, \t\text{N}771s2 2s2 2p31s^2 \, 2s^2 \, 2p^3[1L] [1L] [1][1][1] [ ]
Oxygen, \t\text{O}881s2 2s2 2p41s^2 \, 2s^2 \, 2p^4[1L] [1L] [1L][1][1] [ ]
Fluorine, \t\text{F}991s2 2s2 2p51s^2 \, 2s^2 \, 2p^5[1L] [1L] [1L][1L][1] [ ]
Neon, \t\text{Ne}10101s2 2s2 2p61s^2 \, 2s^2 \, 2p^6[1L] [1L] [1L][1L][1L] [ ]
Sodium, \t\text{Na}11111s2 2s2 2p6 3s11s^2 \, 2s^2 \, 2p^6 \, 3s^1[1L] [1L] [1L][1L][1L] [1]

Transition Elements and Stability Anomalies

Transition Elements (Scandium to Zinc)

  • General Electronic Configuration: (n−1)d1−10 ns1−2(n - 1)d^{1-10} \, ns^{1-2}

    • (n−1)(n - 1) stands for the inner shell and the dd orbitals may have 1 to 10 electrons.
    • nsns stands for the outermost shell (nn) which may have 1 or 2 electrons.
  • Filling Order: After filling the 4s4s orbital successively with two electrons at atomic numbers 19 (K\text{K}) and 20 (Ca\text{Ca}), the next incoming electron goes to the 3d3d orbital instead of 4p4p, as the 3d3d orbital is lower in energy than the 4p4p orbital.

Table 5.7: Electron Configuration of Scandium to Zinc
ElementNumber of ElectronsElectron ConfigurationOrbital Box Diagram (3d,4s3d, 4s)
Scandium, \t\text{Sc}21211s2 2s2 2p6 3s2 3p6 3d1 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^1 \, 4s^2[Ar] [1][][][][] [1L][\text{Ar}] \, [1][ ][ ][ ][ ] \, [1L]
Titanium, \t\text{Ti}22221s2 2s2 2p6 3s2 3p6 3d2 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^2 \, 4s^2[Ar] [1][1][][][] [1L][\text{Ar}] \, [1][1][ ][ ][ ] \, [1L]
Vanadium, \t\text{V}23231s2 2s2 2p6 3s2 3p6 3d3 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^3 \, 4s^2[Ar] [1][1][1][][] [1L][\text{Ar}] \, [1][1][1][ ][ ] \, [1L]
Chromium, \t\text{Cr}24241s2 2s2 2p6 3s2 3p6 3d5 4s11s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^5 \, 4s^1[Ar] [1][1][1][1][1] [1][\text{Ar}] \, [1][1][1][1][1] \, [1]
Manganese, \t\text{Mn}25251s2 2s2 2p6 3s2 3p6 3d5 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^5 \, 4s^2[Ar] [1][1][1][1][1] [1L][\text{Ar}] \, [1][1][1][1][1] \, [1L]
Iron, \t\text{Fe}26261s2 2s2 2p6 3s2 3p6 3d6 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^6 \, 4s^2[Ar] [1L][1][1][1][1] [1L][\text{Ar}] \, [1L][1][1][1][1] \, [1L]
Cobalt, \t\text{Co}27271s2 2s2 2p6 3s2 3p6 3d7 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^7 \, 4s^2[Ar] [1L][1L][1][1][1] [1L][\text{Ar}] \, [1L][1L][1][1][1] \, [1L]
Nickel, \t\text{Ni}28281s2 2s2 2p6 3s2 3p6 3d8 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^8 \, 4s^2[Ar] [1L][1L][1L][1][1] [1L][\text{Ar}] \, [1L][1L][1L][1][1] \, [1L]
Copper, \t\text{Cu}29291s2 2s2 2p6 3s2 3p6 3d10 4s11s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^{10} \, 4s^1[Ar] [1L][1L][1L][1L][1L] [1][\text{Ar}] \, [1L][1L][1L][1L][1L] \, [1]
Zinc, \t\text{Zn}30301s2 2s2 2p6 3s2 3p6 3d10 4s21s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6 \, 3d^{10} \, 4s^2[Ar] [1L][1L][1L][1L][1L] [1L][\text{Ar}] \, [1L][1L][1L][1L][1L] \, [1L]

Rule of Stability

  • Stability Criteria:

    1. Completely filled orbitals are more stable than partially filled orbitals.
    2. Exactly half-filled orbitals are more stable than partially filled orbitals.
  • Anomalous Case 1: Copper (Cu\text{Cu}, Z=29Z=29):

    • Expected: [Ar] 3d9 4s2[\text{Ar}] \, 3d^9 \, 4s^2
    • Actual: [Ar] 3d10 4s1[\text{Ar}] \, 3d^{10} \, 4s^1
    • Explanation: Copper's dd orbital is just one electron away from stability. Therefore, one electron from the 4s4s orbital jumps into the 3d3d orbital. In this way, the dd orbital is full (stable) and the ss orbital is half-full (also stable).

Copper electron configuration adjustment for d-orbital stability

  • Anomalous Case 2: Chromium (Cr\text{Cr}, Z=24Z=24):
    • Expected: [Ar] 3d4 4s2[\text{Ar}] \, 3d^4 \, 4s^2
    • Actual: [Ar] 3d5 4s1[\text{Ar}] \, 3d^5 \, 4s^1
    • Explanation: One electron shifts from 4s4s to 3d3d so that both the 3d3d and 4s4s subshells become half-filled, conferring maximum stability.

Electron Configurations of Ions

  • Valence Shell: The outermost shell of an atom is referred to as the valence shell and its electron(s) as valence electron(s).

Electron Configuration of Cations

  • Formation Mechanism: Atoms lose electron(s) to attain a complete valence shell and form cations.

  • Example (Sodium Cation, Na+\text{Na}^+):

    • Neutral Sodium (\t\text{Na}, 11 e⁻): 1s2 2s2 2p6 3s11s^2 \, 2s^2 \, 2p^6 \, 3s^1
    • Sodium loses one electron to attain Neon configuration and a complete shell:
    • Sodium Ion (\t\text{Na}^+, 10 e⁻): 1s2 2s2 2p61s^2 \, 2s^2 \, 2p^6

Electron Configuration of Anions

  • Formation Mechanism: Atoms gain electron(s) to complete the valence shell and form anions.

  • Example (Chloride Anion, Cl−\text{Cl}^-):

    • Neutral Chlorine (\t\text{Cl}, 17 e⁻): 1s2 2s2 2p6 3s2 3p51s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^5
    • Chlorine gains one electron to attain Argon (\t\text{Ar}) configuration and a complete shell:
    • Chloride Ion (\t\text{Cl}^-, 18 e⁻): 1s2 2s2 2p6 3s2 3p61s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^6

Electron configurations of sodium and chlorine atoms and their corresponding ions

Tutorial Questions & Practice Problems

Objective Questions

  1. Which of the following subshells does not exist?

    • A. 2s2s
    • B. 3p3p
    • C. 2d2d
    • D. 4f4f
  2. An atom with unpaired electrons is called _______:

    • A. diamagnetic
    • B. orbital
    • C. paramagnetic
    • D. spin
  3. Choose the correct shape to represent the pyp_y orbital:

3D shapes of atomic p orbitals for tutorial question 3

  • A. Dumbbell on z-axis
  • B. Dumbbell off-axis
  • C. Dumbbell on y-axis
  • D. Four-lobe clover shape
  1. Which statement is TRUE about electrons in the same orbital?

    • A. They can be more than two.
    • B. They must have opposite spins.
    • C. They must have the same spin.
    • D. They occupy different energy levels.
  2. An O2−\text{O}^{2-} anion will have the same electron configuration as:

    • A. Chlorine
    • B. Argon
    • C. Helium
    • D. Neon

Subjective Questions

  1. Define atomic orbital according to modern quantum theory.

  2. The last electron of Y\text{Y} atom has the following quantum number: n=4,l=0,ml=0,ms=+12n = 4, l = 0, m_l = 0, m_s = +\frac{1}{2}.

    • (a) Identify the subshell occupied by the last electron
    • (b) Suggest the electron configuration of the atom.
    • (c) Predict the ion likely formed by the atom.
    • (d) Explain how the quantum numbers help predict the ion formed
    • (e) Write the electron configuration of the ion formed.
  3. An element W\text{W} is found to have the proton number of 17.

    • (a) Write the electronic configuration of the element and its ionic form of the element.
    • (b) Sketch the shape of the last 3 electrons occupied in the ionic form of the element
  4. Two atoms have the following electron configuration:

    • Q:1s2 2s2 2p6 3s1\text{Q}: 1s^2 \, 2s^2 \, 2p^6 \, 3s^1
    • X:1s2 2s2 2p6 3s2 3p5\text{X}: 1s^2 \, 2s^2 \, 2p^6 \, 3s^2 \, 3p^5
    • (a) Predict the ion formed by each atom.
    • (b) Using electron configuration and quantum numbers, explain why atom Q\text{Q} forms a positive ion while atom X\text{X} forms a negative ion
    • (c) Write the electron configuration of each ion.
    • (d) Based on the answer in (a), predict the type of bond formation when the two atoms react.
  5. What is the spdfspdf notation for an orbital with n=3n = 3 and l=1l = 1 quantum number? How many orbitals are there in the subshell? Indicate the values of mlm_l for each of these orbitals.

  6. **Write the complete set of quantum numbers (n,l,n, l,m_l) that quantum theory allows for each of the following orbitals:**\n * (a) 1s\n * (b) 2s\n * (c) 2p\n * (d) 3d\n\n7. **Some of these sets of quantum numbers (n, l, m_l, m_s) could not occur. Explain why:**\n * (a) (2, 1, 2, +\frac{1}{2})\n * (b) (3, 2, 0, -\frac{1}{2})\n * (c) (1, 0, 0, 1)\n * (d) (3, 3, 2, -\frac{1}{2})\n\n8. **Using spdf notation, write the electron configuration for:**\n * (a) \text{Be}((Z=4)\n * (b) \text{F}((Z=9)\n * (c) \text{P}((Z=15)\n * (d) \text{V}((Z=23)\n\n9. **Using Noble-gas-core notation, write the electron configurations for:**\n * (a) \text{Si}((Z=14)\n * (b) \text{Cl}((Z=17)\n * (c) \text{V}((Z=23)\n * (d) \text{Ni}((Z=28)\n\n10. **State and explain Aufbau's Principle using Titanium (Z=22) as an example.**\n\n11. **State the Pauli Exclusion Principle. Would any of the following electron configurations violate this rule? Explain why?**\n * (a) 1s^3\n * (b) 1s^2 \, 2s^2 \, 2p_x^2\n * (c) 1s^2 \, 2s^2 \, 2p_x^3\n\n12. **State Hund's Rule. Would any of the following electron configurations violate this rule? Explain why?**\n * (a) 1s^2 \, 2s^2 \, 2p_x^2\n * (c) 1s^2 \, 2s^2 \, 2p_x^1 \, 2p_y^1\n\n13. **Write the correct electron configurations of chromium, \text{Cr}((Z=24)andcopper,) and copper,\text{Cu}((Z=29).**\n\n14. **The valence electron of an element \text{Z} has the orbital diagram of `[1]`:**\n * (a) Write a set of four quantum numbers to describe the electron in its orbital.\n * (b) What is the electronic configuration of \text{Z}$$ if this was the electron with the highest energy?