Work, Energy and Power study notes

Introduction to Work, Energy and Power

The terms work, energy, and power are frequently used in everyday language. A farmer ploughing a field, a construction worker carrying bricks, a student studying for an examination, and an artist painting a landscape are all said to be working. In physics, however, work has a precise definition. Energy is related to the capacity to do work, such as a long-distance runner having stamina. Power in everyday life, like a powerful punch in karate or boxing delivered at great speed, is close to the physical meaning. There is often only a loose correlation between physical definitions and physiological pictures.

The Scalar Product

Physical quantities like displacement, velocity, acceleration, and force are vectors. Multiplication of vectors can be done in two ways: the scalar product, which yields a scalar, and the vector product, which produces a new vector.

  • Definition: The scalar product or dot product of two vectors A\mathbf{A} and B\mathbf{B} is denoted as A⋅B\mathbf{A} \cdot \mathbf{B} and defined as:

A⋅B=ABcos⁡(θ)\mathbf{A} \cdot \mathbf{B} = AB \cos(\theta)

where θ\theta is the angle between the two vectors. Since AA, BB, and cos⁡(θ)\cos(\theta) are scalars, the result is a scalar quantity with no direction.

  • Geometric Interpretation:

    • Bcos⁡(θ)B \cos(\theta) is the projection of B\mathbf{B} onto A\mathbf{A}.
    • Acos⁡(θ)A \cos(\theta) is the projection of A\mathbf{A} onto B\mathbf{B}.
    • A⋅B\mathbf{A} \cdot \mathbf{B} is the product of the magnitude of A\mathbf{A} and the component of B\mathbf{B} along A\mathbf{A}.
  • Properties:

    • Commutative Law: A⋅B=B⋅A\mathbf{A} \cdot \mathbf{B} = \mathbf{B} \cdot \mathbf{A}
    • Distributive Law: A⋅(B+C)=A⋅B+A⋅C\mathbf{A} \cdot (\mathbf{B} + \mathbf{C}) = \mathbf{A} \cdot \mathbf{B} + \mathbf{A} \cdot \mathbf{C}
    • Scalar Multiplication: A⋅(λB)=λ(A⋅B)\mathbf{A} \cdot (\lambda \mathbf{B}) = \lambda (\mathbf{A} \cdot \mathbf{B}) for a real number λ\lambda.
  • Unit Vectors: For unit vectors i^\hat{i}, j^\hat{j}, and k^\hat{k}, the following relations hold:

    • i^⋅i^=j^⋅j^=k^⋅k^=1\hat{i} \cdot \hat{i} = \hat{j} \cdot \hat{j} = \hat{k} \cdot \hat{k} = 1
    • i^⋅j^=j^⋅k^=k^⋅i^=0\hat{i} \cdot \hat{j} = \hat{j} \cdot \hat{k} = \hat{k} \cdot \hat{i} = 0
  • Component Form: Given A=Axi^+Ayj^+Azk^\mathbf{A} = A_x\hat{i} + A_y\hat{j} + A_z\hat{k} and B=Bxi^+Byj^+Bzk^\mathbf{B} = B_x\hat{i} + B_y\hat{j} + B_z\hat{k}, the scalar product is:

A⋅B=AxBx+AyBy+AzBz\mathbf{A} \cdot \mathbf{B} = A_x B_x + A_y B_y + A_z B_z

  • Self-Product: A⋅A=Ax2+Ay2+Az2=A2\mathbf{A} \cdot \mathbf{A} = A_x^2 + A_y^2 + A_z^2 = A^2, because the angle θ=0\theta = 0.

  • Perpendicularity: If A⋅B=0\mathbf{A} \cdot \mathbf{B} = 0, then A\mathbf{A} and B\mathbf{B} are perpendicular.

Example 5.1: Given F=(3i^+4j^−5k^)\mathbf{F} = (3\hat{i} + 4\hat{j} - 5\hat{k}) units and displacement d=(5i^+4j^+3k^)\mathbf{d} = (5\hat{i} + 4\hat{j} + 3\hat{k}) units.

  1. F⋅d=(3×5)+(4×4)+(−5×3)=15+16−15=16\mathbf{F} \cdot \mathbf{d} = (3 \times 5) + (4 \times 4) + (-5 \times 3) = 15 + 16 - 15 = 16 units.
  2. F2=32+42+(−5)2=9+16+25=50F^2 = 3^2 + 4^2 + (-5)^2 = 9 + 16 + 25 = 50. So, F=50F = \sqrt{50}.
  3. d2=52+42+32=25+16+9=50d^2 = 5^2 + 4^2 + 3^2 = 25 + 16 + 9 = 50. So, d=50d = \sqrt{50}.
  4. cos⁡(θ)=165050=1650=0.32\cos(\theta) = \frac{16}{\sqrt{50}\sqrt{50}} = \frac{16}{50} = 0.32. Therefore, θ=cos⁡−1(0.32)\theta = \cos^{-1}(0.32).

The Work-Energy Theorem

For rectilinear motion under constant acceleration aa, the kinematic relation is:

v2−u2=2asv^2 - u^2 = 2as

Multiplying both sides by m2\frac{m}{2}, where mm is mass:

12mv2−12mu2=mas=Fs\frac{1}{2}mv^2 - \frac{1}{2}mu^2 = mas = Fs

In three dimensions, using vectors:

v2−u2=2a⋅dv^2 - u^2 = 2\mathbf{a} \cdot \mathbf{d}

12mv2−12mu2=ma⋅d=F⋅d\frac{1}{2}mv^2 - \frac{1}{2}mu^2 = m\mathbf{a} \cdot \mathbf{d} = \mathbf{F} \cdot \mathbf{d}

  • Kinetic Energy (KK): Defined as 12mv2\frac{1}{2}mv^2.
  • Work (WW): Defined as F⋅d\mathbf{F} \cdot \mathbf{d}.
  • Theorem Statement: The change in kinetic energy of a particle is equal to the work done on it by the net force (Kf−Ki=WK_f - K_i = W).

Mathematical Representation of Work

Work is defined as the product of the component of the force in the direction of the displacement and the magnitude of that displacement:

W=(Fcos⁡(θ))d=F⋅dW = (F \cos(\theta))d = \mathbf{F} \cdot \mathbf{d}

  • Zero Work Scenarios:

    1. Displacement is zero (e.g., pushing a rigid wall, or a weightlifter holding 150 kg steadily).
    2. Force is zero (e.g., a block moving on a smooth frictionless table).
    3. Force and displacement are perpendicular (θ=π2\theta = \frac{\pi}{2}, cos⁡(90∘)=0\cos(90^\circ) = 0). Examples: the gravitational force on a block moving horizontally, or the earth's gravitational force on the moon in a circular orbit.
  • Signs of Work:

    • Positive if 0∘≤θ<90∘0^\circ \le \theta < 90^\circ.
    • Negative if 90∘<θ≤180∘90^\circ < \theta \le 180^\circ. Friction often does negative work as it opposes displacement (θ=180∘\theta = 180^\circ, cos⁡(180∘)=−1\cos(180^\circ) = -1).
  • Units and Dimensions:

    • Dimensions: [ML2T−2][ML^2T^{-2}].
    • SI Unit: Joule (J), named after James Prescott Joule (1811–1869).
    • Alternative Units:
    • erg: 10−7 J10^{-7}\,J
    • electron volt (eV): 1.6×10−19 J1.6 \times 10^{-19}\,J
    • calorie (cal): 4.186 J4.186\,J
    • kilowatt hour (kWh): 3.6×106 J3.6 \times 10^6\,J

Example 5.3: A cyclist skidding for 10 m10\,m with a road force of 200 N200\,N opposing motion: (a) Work done by road on cycle: W=200×10×cos⁡(180∘)=−2000 JW = 200 \times 10 \times \cos(180^\circ) = -2000\,J. (b) Work done by cycle on road: Since the road undergoes no displacement, work is 0 J0\,J. (Newton's Third Law forces are equal/opposite, but work done on each body may differ).

Kinetic Energy

Kinetic energy (KK) is a scalar quantity defined as:

K=12mv2=12mv⋅vK = \frac{1}{2}mv^2 = \frac{1}{2}m\mathbf{v} \cdot \mathbf{v}

It measures the work an object can perform by virtue of its motion. Historical uses include grinding corn using flowing streams or sailing ships using wind energy.

Example 5.4: A 50.0 g50.0\,g bullet fired at 200 m/s200\,m/s hits plywood and emerges with 10% of its initial kinetic energy.

  1. Ki=12(0.050 kg)(200 m/s)2=1000 JK_i = \frac{1}{2}(0.050\,kg)(200\,m/s)^2 = 1000\,J.
  2. Kf=0.1×1000=100 JK_f = 0.1 \times 1000 = 100\,J.
  3. vf=2×1000.050=63.2 m/sv_f = \sqrt{\frac{2 \times 100}{0.050}} = 63.2\,m/s. (Speed reduced by 68%, not 90%).

Work Done by a Variable Force

When a force F(x)F(x) varies with position, the work done over small displacement Δx\Delta x is approximately ΔW=F(x)Δx\Delta W = F(x)\Delta x. The total work is the sum of these rectangular areas:

W≅∑xixfF(x)ΔxW \cong \sum_{x_i}^{x_f} F(x)\Delta x

Taking the limit as Δx→0\Delta x \rightarrow 0:

W=lim⁡Δx→0∑F(x)Δx=∫xixfF(x)dxW = \lim_{\Delta x \to 0} \sum F(x)\Delta x = \int_{x_i}^{x_f} F(x) dx

This represents the area under the force-displacement curve.

Example 5.5: A woman applies 100 N100\,N force for 10 m10\,m, then the force reduces linearly to 50 N50\,N over the next 10 m10\,m. Friction is a constant 50 N50\,N.

  1. Work by woman (WFW_F): Area of rectangle (100×10100 \times 10) + area of trapezium (12×(100+50)×10\frac{1}{2} \times (100 + 50) \times 10) = 1000+750=1750 J1000 + 750 = 1750\,J.
  2. Work by friction (WfW_f): Area of rectangle (−50×20-50 \times 20) = −1000 J-1000\,J.

The Work-Energy Theorem for a Variable Force

The time rate of change of kinetic energy is:

dKdt=ddt(12mv2)=mvdvdt=vF\frac{dK}{dt} = \frac{d}{dt}\left(\frac{1}{2}mv^2\right) = mv\frac{dv}{dt} = vF

Since v=dxdtv = \frac{dx}{dt}, then dK=FdxdK = F dx. Integrating leads to:

Kf−Ki=∫xixfF(x)dx=WK_f - K_i = \int_{x_i}^{x_f} F(x) dx = W

Temporal and Directional Information:

  • Newton's Second Law provides acceleration at every instant; the WE theorem is an integral form and "integrates over" specific time information.
  • Newton's Second Law is a vector relation; the WE theorem is a scalar relation, losing directional information.

Example 5.6:m=1 kgm = 1\,kg, vi=2 m/sv_i = 2\,m/s. Retarding force Fr=−k/xF_r = -k/x for 0.1<x<2.01 m0.1 < x < 2.01\,m where k=0.5 Jk = 0.5\,J.

  1. Kf=Ki+∫0.12.01(−kx)dxK_f = K_i + \int_{0.1}^{2.01} \left(-\frac{k}{x}\right) dx
  2. Kf=12(1)(2)2−kln⁡(2.010.1)=2−0.5ln⁡(20.1)≈2−1.5=0.5 JK_f = \frac{1}{2}(1)(2)^2 - k \ln\left(\frac{2.01}{0.1}\right) = 2 - 0.5 \ln(20.1) \approx 2 - 1.5 = 0.5\,J.
  3. vf=2×0.51=1 m/sv_f = \sqrt{\frac{2 \times 0.5}{1}} = 1\,m/s.

The Concept of Potential Energy

Potential energy is "stored" energy by virtue of the position or configuration of a body. Examples include a stretched bow-string or fault lines in the earth's crust (compressed springs).

  • Gravitational Potential Energy: denoted as V(h)V(h). For mass mm raised to height hh:

V(h)=mghV(h) = mgh

  • Force and Potential Energy Relation: The conservative force FF is the negative derivative of the potential energy:

F=−dV(h)dh=−mgF = -\frac{dV(h)}{dh} = -mg

  • Conservation Relation: If a ball is released from height hh, it hits the ground with speed 12mv2=mgh\frac{1}{2}mv^2 = mgh (v2=2ghv^2 = 2gh).

  • Definition of Potential Energy V(x)V(x):

F(x)=−dVdxF(x) = -\frac{dV}{dx}

∫ViVfdV=−∫xixfF(x)dx\int_{V_i}^{V_f} dV = -\int_{x_i}^{x_f} F(x) dx

V(xi)−V(xf)=WV(x_i) - V(x_f) = W

The Conservation of Mechanical Energy

For a conservative force, the change in kinetic energy ΔK=F(x)Δx\Delta K = F(x)\Delta x and change in potential energy ΔV=−F(x)Δx\Delta V = -F(x)\Delta x imply:

ΔK+ΔV=0  ⟹  Δ(K+V)=0\Delta K + \Delta V = 0 \implies \Delta(K + V) = 0

  • Total Mechanical Energy (EE): E=K+V(x)E = K + V(x), which remains constant for conservative forces.
  • Conservative Force Criteria:
    1. Derived from a scalar quantity V(x)V(x) via F=−dVdxF = -\frac{dV}{dx}.
    2. Work done depends only on endpoints (xi,xfx_i, x_f).
    3. Work done in a closed path is zero.

Example 5.7 (Bob in vertical circular motion): A bob of mass mm on string length LL with horizontal speed v0v_0 at lowest point AA.

  1. Lowest point (AA): EA=12mv02E_A = \frac{1}{2}mv_0^2.
  2. Highest point (CC): String slackens (TC=0T_C = 0), so mvC2L=mg  ⟹  vC=gL\frac{mv_C^2}{L} = mg \implies v_C = \sqrt{gL}.
  3. Energy at CC: EC=12m(gL)+mg(2L)=52mgLE_C = \frac{1}{2}m(gL) + mg(2L) = \frac{5}{2}mgL.
  4. Equating EA=ECE_A = E_C: v0=5gLv_0 = \sqrt{5gL}.
  5. At point BB (mid-height): EB=12mvB2+mgL=52mgL  ⟹  vB=3gLE_B = \frac{1}{2}mv_B^2 + mgL = \frac{5}{2}mgL \implies v_B = \sqrt{3gL}.
  6. Kinetic energy ratio KB/KC=3mgL/2mgL/2=3K_B/K_C = \frac{3mgL/2}{mgL/2} = 3.

The Potential Energy of a Spring

An ideal spring exerts a restorative force proportional to displacement (Hooke's Law):

Fs=−kxF_s = -kx

where kk is the spring constant (stiffness) in N m−1N\,m^{-1}.

  • Work Done by Spring Force (WsW_s): Moving from 00 to extension xmx_m:

Ws=∫0xm(−kx)dx=−12kxm2W_s = \int_0^{x_m} (-kx) dx = -\frac{1}{2}kx_m^2

  • Spring Potential Energy (V(x)V(x)):

V(x)=12kx2V(x) = \frac{1}{2}kx^2

  • Conservation of Energy: In a system with no friction, 12mv2+12kx2\frac{1}{2}mv^2 + \frac{1}{2}kx^2 is constant. Maximum speed vmv_m occurs at x=0x = 0:

12mvm2=12kxm2  ⟹  vm=xmkm\frac{1}{2}mv_{m}^2 = \frac{1}{2}kx_m^2 \implies v_m = x_m \sqrt{\frac{k}{m}}

Example 5.8: A car (1000 kg1000\,kg) at 18 km/h18\,km/h (5 m/s5\,m/s) hits a spring with k=5.25×103 N m−1k = 5.25 \times 10^3\,N\,m^{-1}. Initial K=12(1000)(5)2=1.25×104 JK = \frac{1}{2}(1000)(5)^2 = 1.25 \times 10^4\,J. At max compression xmx_m: 12kxm2=1.25×104  ⟹  xm=2.00 m\frac{1}{2}kx_m^2 = 1.25 \times 10^4 \implies x_m = 2.00\,m.

Forces and the Arbitrary Nature of Potential Energy

  • No Time Information: Potential energy analysis yields position and speed but not the time duration without solving Newton's Second Law.
  • Non-conservative Forces: Friction is non-conservative; energy is lost as heat. The revised WE theorem is:

ΔE=Δ(K+V)=Wnc\Delta E = \Delta(K+V) = W_{nc}

where WncW_{nc} is work done by non-conservative forces.

  • Arbitrary Zero Point: The reference point for V=0V = 0 is chosen for convenience (e.g., ground for gravity, equilibrium for springs). It must remain consistent within a problem.

Example 5.9: Repeat example 5.8 with friction μ=0.5\mu = 0.5. ΔK=Ws+Wf  ⟹  −12mvi2=−12kxm2−μmgxm\Delta K = W_s + W_f \implies -\frac{1}{2}mv_i^2 = -\frac{1}{2}kx_m^2 - \mu mg x_m Rearranging: 12kxm2+μmgxm−12mvi2=0\frac{1}{2}kx_m^2 + \mu mg x_m - \frac{1}{2}mv_i^2 = 0 Solving for xmx_m with numerical values (μmg=5×103 N\mu mg = 5 \times 10^3\,N) gives xm=1.35 mx_m = 1.35\,m.

Power

Power is the time rate at which work is done or energy is transferred.

  • Average Power (PavP_{av}): Pav=WtP_{av} = \frac{W}{t}.
  • Instantaneous Power (PP):

P=dWdt=F⋅drdt=F⋅vP = \frac{dW}{dt} = \mathbf{F} \cdot \frac{d\mathbf{r}}{dt} = \mathbf{F} \cdot \mathbf{v}

  • Properties: Scalar quantity with dimensions [ML2T−3][ML^2T^{-3}].
  • Units:
    • SI Unit: Watt (W) = 1 J s−11\,J\,s^{-1}.
    • Horsepower (hp) = 746 W746\,W.
    • Kilowatt hour (kWh) is a unit of energy, not power: 1 kWh=3.6×106 J1\,kWh = 3.6 \times 10^6\,J.

Example 5.10: Elevator (1800 kg1800\,kg) moving up at 2 m/s2\,m/s with 4000 N4000\,N friction. Total downward force F=mg+Ffriction=(1800×10)+4000=22000 NF = mg + F_{friction} = (1800 \times 10) + 4000 = 22000\,N. P=F⋅v=22000×2=44000 W≈59 hpP = F \cdot v = 22000 \times 2 = 44000\,W \approx 59\,hp.

Collisions

In all collisions, total linear momentum is conserved (Δp1+Δp2=0\Delta p_1 + \Delta p_2 = 0 based on Newton's Third Law F12=−F21\mathbf{F}_{12} = -\mathbf{F}_{21}). Kinetic energy is not always conserved.

Elastic and Inelastic Collisions

  • Elastic Collision: Total kinetic energy is conserved. Deformation is relieved perfectly (like a compressed spring regaining shape).
  • Inelastic Collision: Kinetic energy is not conserved; it is transformed into heat or sound.
  • Completely Inelastic Collision: The two bodies stick together and move with a common velocity after the collision.

Collisions in One Dimension

Stationary mass m2m_2, moving mass m1m_1 at v1iv_{1i}.

Completely Inelastic:m1v1i=(m1+m2)vf  ⟹  vf=m1m1+m2v1im_1 v_{1i} = (m_1 + m_2) v_f \implies v_f = \frac{m_1}{m_1+m_2} v_{1i} Loss in kinetic energy ΔK=12m1m2m1+m2v1i2\Delta K = \frac{1}{2} \frac{m_1 m_2}{m_1 + m_2} v_{1i}^2.

Elastic: Equations for momentum and KE conservation:

  1. m1v1i=m1v1f+m2v2fm_1 v_{1i} = m_1 v_{1f} + m_2 v_{2f}
  2. 12m1v1i2=12m1v1f2+12m2v2f2\frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2

Solutions: v1f=m1−m2m1+m2v1iv_{1f} = \frac{m_1 - m_2}{m_1 + m_2} v_{1i}v2f=2m1m1+m2v1iv_{2f} = \frac{2 m_1}{m_1 + m_2} v_{1i}

  • Special Cases:
    • Case I (m1=m2m_1 = m_2): v1f=0v_{1f} = 0, v2f=v1iv_{2f} = v_{1i} (masses swap velocities).
    • Case II (m2≫m1m_2 \gg m_1): v1f≈−v1iv_{1f} \approx -v_{1i}, v2f≈0v_{2f} \approx 0.

Example 5.11 (Neutron Slowing): Neutron (m1m_1) hits moderator nuclei (m2m_2). Fractional kinetic energy lost by neutron f1=(m1−m2m1+m2)2f_1 = \left(\frac{m_1 - m_2}{m_1 + m_2}\right)^2. For Deuterium (m2=2m1m_2 = 2m_1), loss is f2=8/9≈90%f_2 = 8/9 \approx 90\%. For Carbon (m2=12m1m_2 = 12m_1), loss is f2≈28.4%f_2 \approx 28.4\%.

Collisions in Two Dimensions

Momentum conservation applies along xx and yy axes:

m1v1i=m1v1fcos⁡(θ1)+m2v2fcos⁡(θ2)m_1 v_{1i} = m_1 v_{1f} \cos(\theta_1) + m_2 v_{2f} \cos(\theta_2)0=m1v1fsin⁡(θ1)−m2v2fsin⁡(θ2)0 = m_1 v_{1f} \sin(\theta_1) - m_2 v_{2f} \sin(\theta_2)

For elastic collisions, an additional scalar equation for KE is used. Generally, there are four unknowns (v1f,v2f,θ1,θ2v_{1f}, v_{2f}, \theta_1, \theta_2), requiring at least one measurement (like θ1\theta_1) to solve.

Example 5.12: Two billiard balls of equal mass (m1=m2m_1 = m_2). Incoming ball hits stationary ball which goes to θ2=37∘\theta_2 = 37^\circ. For elastic collisions with equal masses, θ1+θ2=90∘\theta_1 + \theta_2 = 90^\circ. 37∘+θ1=90∘  ⟹  θ1=53∘37^\circ + \theta_1 = 90^\circ \implies \theta_1 = 53^\circ.

Scattering: Events where forces involve action-at-a-distance (e.g., alpha particles near a nucleus or comets near the sun) are called scattering. The outcomes depend on the interaction type, masses, shapes, and sizes.

Introduction to Work, Energy and Power

The terms work, energy, and power are frequently used in everyday language. For instance, a farmer ploughing a field, a construction worker carrying bricks, a student studying for an examination, and an artist painting a landscape are all said to be working. However, in physics, work has a precise definition that quantifies energy transfer. Energy is often understood as the capacity to do work; for example, a long-distance runner possesses stamina which can be viewed as an energy reserve. Power, in everyday terms, is akin to a powerful punch in karate or boxing delivered at great speed, closely resembling its physical meaning of the rate at which work is done. There is often only a loose correlation between these physical definitions and their physiological counterparts.

The Scalar Product

Physical quantities like displacement, velocity, acceleration, and force are vectors. Multiplication of vectors can be performed in two ways: the scalar product, which results in a scalar, and the vector product, which results in a new vector.

  • Definition: The scalar product or dot product of two vectors A\mathbf{A} and B\mathbf{B} is denoted as A⋅B\mathbf{A} \cdot \mathbf{B} and is defined mathematically as:
    A⋅B=ABcos⁡(θ)\mathbf{A} \cdot \mathbf{B} = AB \cos(\theta), where θ\theta is the angle between the two vectors. Since AA, BB, and cos⁡(θ)\cos(\theta) are scalars, the result is a scalar quantity without direction.

  • Geometric Interpretation:

    • Bcos⁡(θ)B \cos(\theta) is the projection of B\mathbf{B} onto A\mathbf{A}.
    • Acos⁡(θ)A \cos(\theta) is the projection of A\mathbf{A} onto B\mathbf{B}.
    • A⋅B\mathbf{A} \cdot \mathbf{B} indicates how much of one vector is in the direction of another.
  • Properties:

    • Commutative Law: A⋅B=B⋅A\mathbf{A} \cdot \mathbf{B} = \mathbf{B} \cdot \mathbf{A}
    • Distributive Law: A⋅(B+C)=A⋅B+A⋅C\mathbf{A} \cdot (\mathbf{B} + \mathbf{C}) = \mathbf{A} \cdot \mathbf{B} + \mathbf{A} \cdot \mathbf{C}
    • Scalar Multiplication: A⋅(λB)=λ(A⋅B)\mathbf{A} \cdot (\lambda \mathbf{B}) = \lambda (\mathbf{A} \cdot \mathbf{B}) for a real number λ\lambda.
    • Unit Vectors: For unit vectors i^\hat{i}, j^\hat{j}, and k^\hat{k}, the following properties hold:
    • i^⋅i^=j^⋅j^=k^⋅k^=1\hat{i} \cdot \hat{i} = \hat{j} \cdot \hat{j} = \hat{k} \cdot \hat{k} = 1
    • i^⋅j^=j^⋅k^=k^⋅i^=0\hat{i} \cdot \hat{j} = \hat{j} \cdot \hat{k} = \hat{k} \cdot \hat{i} = 0
    • Component Form: Given A=A<em>xi^+A</em>yj^+A<em>zk^\mathbf{A} = A<em>x\hat{i} + A</em>y\hat{j} + A<em>z\hat{k} and B=B</em>xi^+B<em>yj^+B</em>zk^\mathbf{B} = B</em>x\hat{i} + B<em>y\hat{j} + B</em>z\hat{k}, the scalar product is calculated as:
      A⋅B=A<em>xB</em>x+A<em>yB</em>y+A<em>zB</em>z\mathbf{A} \cdot \mathbf{B} = A<em>x B</em>x + A<em>y B</em>y + A<em>z B</em>z
    • Self-Product: A⋅A=A<em>x2+A</em>y2+Az2=A2\mathbf{A} \cdot \mathbf{A} = A<em>x^2 + A</em>y^2 + A_z^2 = A^2, since the angle θ=0\theta = 0.
    • Perpendicularity: If A⋅B=0\mathbf{A} \cdot \mathbf{B} = 0, then the vectors A\mathbf{A} and B\mathbf{B} are perpendicular.

Example 5.1: Given F=(3i^+4j^−5k^)\mathbf{F} = (3\hat{i} + 4\hat{j} - 5\hat{k}) units and displacement d=(5i^+4j^+3k^)\mathbf{d} = (5\hat{i} + 4\hat{j} + 3\hat{k}) units.

  1. F⋅d=(3×5)+(4×4)+(−5×3)=15+16−15=16\mathbf{F} \cdot \mathbf{d} = (3 \times 5) + (4 \times 4) + (-5 \times 3) = 15 + 16 - 15 = 16 units.
  2. F2=32+42+(−5)2=9+16+25=50F^2 = 3^2 + 4^2 + (-5)^2 = 9 + 16 + 25 = 50. Thus, F=50F = \sqrt{50}.
  3. d2=52+42+32=25+16+9=50d^2 = 5^2 + 4^2 + 3^2 = 25 + 16 + 9 = 50. Therefore, d=50d = \sqrt{50}.
  4. cos⁡(θ)=165050=1650=0.32\cos(\theta) = \frac{16}{\sqrt{50}\sqrt{50}} = \frac{16}{50} = 0.32. Hence, θ=cos⁡−1(0.32)\theta = \cos^{-1}(0.32).

The Work-Energy Theorem

For rectilinear motion under constant acceleration aa, the kinematic relation is:
v2−u2=2asv^2 - u^2 = 2as
Multiplying both sides by m2\frac{m}{2}, where mm is mass, we get:
12mv2−12mu2=mas=Fs\frac{1}{2}mv^2 - \frac{1}{2}mu^2 = mas = Fs
In three dimensions, using vectors:
v2−u2=2a⋅dv^2 - u^2 = 2\mathbf{a} \cdot \mathbf{d}
12mv2−12mu2=ma⋅d=F⋅d\frac{1}{2}mv^2 - \frac{1}{2}mu^2 = m\mathbf{a} \cdot \mathbf{d} = \mathbf{F} \cdot \mathbf{d}

  • Kinetic Energy (KK): Defined as K=12mv2K = \frac{1}{2}mv^2.
  • Work (WW): Defined as F⋅d\mathbf{F} \cdot \mathbf{d}.
  • Theorem Statement: The change in kinetic energy of a particle is equal to the work done on it by the net force, expressed as: K<em>f−K</em>i=WK<em>f - K</em>i = W.
Mathematical Representation of Work

Work is defined as the product of the component of the force acting in the direction of the displacement and the magnitude of that displacement:
W=(Fcos⁡(θ))d=F⋅dW = (F \cos(\theta))d = \mathbf{F} \cdot \mathbf{d}

  • Zero Work Scenarios:
    1. Displacement is zero (e.g., pushing against a rigid wall or a weightlifter holding a heavy weight steadily).
    2. Force is zero (e.g., a block moving on a smooth, frictionless surface).
    3. Force and displacement are perpendicular (θ=π2\theta = \frac{\pi}{2}, leading to cos⁡(90∘)=0\cos(90^\circ) = 0). Examples include the gravitational force acting on objects in horizontal motion or the Earth's gravitational pull on the Moon in circular orbit.
  • Signs of Work:
    • Positive if 0∘≤θ<90∘0^\circ \le \theta < 90^\circ
    • Negative if 90∘<θ<180∘90^\circ < \theta < 180^\circ

Units and Dimensions:

  • Dimensions: [ML2T−2][ML^2T^{-2}].
  • SI Unit: Joule (J), named after James Prescott Joule (1811–1869).
  • Alternative Units:
    • Erg: 10−7 J10^{-7}\,J
    • Electron volt (eV): 1.6×10−19 J1.6 \times 10^{-19}\,J
    • Calorie (cal): 4.186 J4.186\,J
    • Kilowatt hour (kWh): 3.6×106 J3.6 \times 10^6\,J

Example 5.3: A cyclist skidding for 10 m10\,m with a road force of 200 N200\,N opposing motion:
(a) Work done by road on cycle: W=200×10×cos⁡(180∘)=−2000 JW = 200 \times 10 \times \cos(180^\circ) = -2000\,J.
(b) Work done by cycle on road: Since there's no displacement of the road, work done is 0 J0\,J. (According to Newton's Third Law, forces are equal and opposite, yet work done on each body may differ).

Kinetic Energy

Kinetic energy (KK) is defined as a scalar quantity given by the formula:
K=12mv2=12mv⋅vK = \frac{1}{2}mv^2 = \frac{1}{2}m\mathbf{v} \cdot \mathbf{v}
It measures the work an object can perform due to its motion. Historical applications of kinetic energy include techniques like grinding corn using flowing streams or enabling sailing ships to employ wind energy.

Example 5.4: Consider a 50.0 g50.0\,g bullet fired at 200 m/s200\,m/s that strikes plywood, emerging with only 10% of its initial kinetic energy:

  1. Ki=12(0.050 kg)(200 m/s)2=1000 JK_i = \frac{1}{2}(0.050\,kg)(200\,m/s)^2 = 1000\,J.
  2. Kf=0.1×1000=100 JK_f = 0.1 \times 1000 = 100\,J.
  3. vf=2×1000.050=63.2 m/sv_f = \sqrt{\frac{2 \times 100}{0.050}} = 63.2\,m/s. (Speed reduced by 68%, not 90%).

Work Done by a Variable Force

When a force F(x)F(x) varies with position, the work done over a small displacement Δx\Delta x is approximated as:
ΔW=F(x)Δx\Delta W = F(x)\Delta x
The total work done is then the sum of these rectangular areas:
W≅∑<em>x</em>ix<em>fF(x)ΔxW \cong \sum<em>{x</em>i}^{x<em>f} F(x)\Delta x Taking the limit as Δx→0\Delta x \rightarrow 0 leads to: W=lim⁡</em>Δx→0∑F(x)Δx=∫<em>x</em>ixfF(x)dxW = \lim</em>{\Delta x \to 0} \sum F(x)\Delta x = \int<em>{x</em>i}^{x_f} F(x) dx
This represents the area under the force-displacement curve.

Example 5.5: A woman exerts a 100 N100\,N force for 10 m10\,m, causing the force to decrease linearly to 50 N50\,N over the next 10 m10\,m. Friction is constant at 50 N50\,N:

  1. Work done by woman (WFW_F): Area of rectangle (100×10100 \times 10) + area of trapezium (12×(100+50)×10\frac{1}{2} \times (100 + 50) \times 10) results in 1000+750=1750 J1000 + 750 = 1750\,J.
  2. Work done against friction (WfW_f): Area of rectangle ($$-50 \times