MB06 Turning (Medium)
Turning Medium Turns
Overview: Understanding climbing and descending turns for aircraft maneuvering.
Date: 5 July 2022
Objectives
Turn the aircraft at a constant rate at a 30° angle of bank while maintaining constant altitude and balanced flight.
Enter medium turns from both climbing and descending phases.
Considerations for Turning
Change direction to:
Avoid clouds
Follow a specific heading
Avoid terrain (especially during valley flying)
Avoid other aircraft for safety
Enhance passenger comfort during the flight
Types of Turns
Rate 1 Turn: 3° every second; 360° in 2 minutes
Medium Turn: Bank angle up to 30°
Steep Turn: Bank angle up to 60° (practiced at 45°)
Forces Involved
Lift and Drag:
As the aircraft banks, the Horizontal Component of Lift (HCL) serves as centripetal force.
To maintain level flight, the Vertical Component of Lift (VCL) must increase to equal weight when banked.
Increasing Angle of Attack (A of A) via back pressure increases turning force.
Adverse Yaw
Up-going wing (increased camber and A of A) results in more lift and drag.
Down-going wing (decreased camber and A of A) leads to less lift and drag.
Use rudder to maintain balance and counteract adverse yaw.
Climbing Turns
Outer wing experiences a larger A of A; inner wing has a smaller A of A.
Maximum of 20° AOB recommended during climbing turns to maintain performance, as increased drag affects climbing ability.
Descending Turns
Outer wing has a smaller A of A, while the inner wing is balanced.
Hold ailerons into turn to maintain bank angle.
Air Management & Instrumentation
Control Inputs: Smooth and coordinated.
Don't chase instruments; rely on visual outside the cockpit for 80% of awareness vs. 20% on instruments.
Critical instruments:
Angle of Bank (AI)
Altitude (Altimeter, VSI)
Balance (Slip/Skid Bar)
Human Factors & Airmanship
Motion Sickness Prevention: Focus on the horizon, avoid sudden head movements.
Lookout: Conduct before and during turns for situational awareness.
Consider passengers’ comfort and directional decisions.
Pre-Entry for Turns
Decide direction and extent of the turn (180° or 360°).
Identify reference point and perform lookout before entering the turn.
Execution of Turns
Roll into the turn with ailerons at the specified bank angle.
Use rudder for balance and increase back pressure to maintain altitude.
During turns, always coordinate control inputs for a smooth transition.
Exiting Turns
Anticipate roll-out point by half of the angle of bank.
Roll wings level, use rudder for balance, and decrease back pressure to manage turn exit.