Chapter 8 & 9


8.1     Joints are classified into three structural and three functional categories 

A.   Joints, or articulations, are the sites where two bones meet.

B.   Joints are classified by structure and by function:

1.   Structural classification focuses on the material binding the bones together and whether or not a joint cavity is present, which gives rise to three classes: fibrous, cartilaginous, and synovial.

2.   Functional classification is based on the amount of movement allowed at the joint: synarthroses are immovable joints, amphiarthroses are slightly movable, and diarthroses are fully movable.

 

8.2     In fibrous joints, the bones are connected by fibrous tissue

A.   In fibrous joints, bones are joined together by fibrous tissue and lack a joint cavity, and provide little to no movement.

B.   There are three types of fibrous joints: sutures, which use very short connective tissue fibers to hold the bones together; syndesmoses, in which the bones are connected by a ligament; and gomphoses, peg-in-socket fibrous joints.

 

8.3     In cartilaginous joints, the bones are connected by cartilage

A.   In cartilaginous joints, the bones are joined together by cartilage, lack a joint cavity, and havevery little mobility.

B.   There are two types of cartilaginous joints: synchondroses, which have a plate of hyaline cartilage connecting the bones, and symphyses, in which the articular surfaces are covered with articular cartilage that is then fused to a pad or plate of fibrocartilage.

 

8.4     Synovial joints have a fluid-filled joint cavity 

A.   Synovial joints have a fluid-filled joint cavity thatallows free movement about the joint.

B.   The general structure of a synovial joint contains six distinguishing features.

1.   Articular cartilage covers the ends of the articulating bones.

2.   The joint (synovial) cavity is a space that is filled with synovial fluid.

3.   The two-layered articular capsule, consisting of a fibrous layer and a synovial membrane, encloses the joint cavity.

4.   Synovial fluid is a viscous, slippery fluid that fills all free space within the joint cavity.

5.   Reinforcing ligaments cross synovial joints to strengthen the joint.

6.   There is a rich supply of nerves innervating the capsule that detect pain and stretch and blood vessels supplying the synovial membrane, giving rise to capillaries that provide filtrate that becomes synovial fluid.

C.   Bursae and tendon sheaths contain lubricant that reduces friction at synovial joints.

D.   Factors Influencing the Stability of Synovial Joints

1.   The shapes of the articular surfaces of bones found at a synovial joint determine the movements that occur at the joint, but play a minimal role in stabilizing the joint.

2.   Ligaments at a synovial joint prevent excessive or unwanted movements and help to stabilize the joint: the greater the number of ligaments at the joint, the greater the stability.

3.   The most important factor stabilizing joints is muscle tone, which keeps tendons crossing joints taut.

E.    Movements Allowed by Synovial Joints

1.   Skeletal muscles attach to bones or other connective structures at two points: the origin, attached to the immovable bone; and the insertion, attached to the movable bone.

2.   Gliding movements occur when one flat, or nearly flat, bone surface glides or slips over another.

3.   Angular movements increase or decrease the angle between two bones.

a.   Flexion decreases the angle of the joint and brings the articulating bones closer together.

b.   Extension increases the angle between the articulating bones.

c.   Dorsiflexion decreases the angle between the top of the foot (dorsal surface) and the anterior surface of the tibia.

d.   Plantar flexion decreases the angle between the sole of the foot (plantar surface) and the posterior side of the tibia.

e.   Abduction is the movement of a limb (or fingers) away from the midline body (or of the hand).

f.    Adduction is the movement of a limb (or fingers) toward the midline of the body (or the hand).

g.   Circumduction is moving a limb so that it describes a cone in the air.

4.   Rotation is the turning of a bone along its own long axis.

5.   Special Movements

a.   Supination is rotating the forearm laterally so that the palm faces anteriorly or superiorly.

b.   Pronation is rotating the arm medially so that the palm faces posteriorly or inferiorly.

c.   Inversion turns the sole of the foot so that it faces medially.

d.   Eversion turns the sole of the foot so that it faces laterally.

e.   Protraction moves the mandible anteriorly; it juts the jaw forward.

f.    Retraction returns the mandible to its original position.

g.   Elevation means lifting a body part superiorly.

h.   Depression means to move an elevated body part inferiorly.

i.    Opposition occurs when you touch your thumb to the fingers on the same hand.

 

8.5     Five examples illustrate the diversity of synovial joints

A.   Temporomandibular Joint

1.   The temporomandibular joint allows both hinge-like movement and side-to-side lateral excursion.

2.   The joint contains an articular disc that divides the synovial cavity into compartments that support each type of movement.

3.   The lateral aspect of the articular capsule contains a lateral ligament that reinforces the joint.

B.   Shoulder (Glenohumeral) Joint

1.   The shoulder joint is a ball-and-socket joint that is the most freely moving joint in the body, although it is not a very stable joint.

2.   The joint capsule surrounding the shoulder joint is thin and loose, and supporting ligaments are located mostly on the anterior aspect, and are weak.

3.   The tendons that cross the shoulder joint form the rotator cuff, encircling the joint, and providing the most stabilizing effect on the joint.

C.   Elbow Joint

1.   The joint between the ulna and humerus provides a stable and smoothly operating hinge joint that allows flexion and extension only.

2.   The thin articular capsule of the elbow provides substantial flexion and extension, but side-to-side movements are restricted by strong capsular ligaments.

3.   Tendons of several arm muscles, the biceps and the triceps, also provide additional stability by crossing the elbow joint.

4.   The radius is not involved in flexion or extension at the elbow, but rotates within the annular ligament to provide pronation and supination of the forearm.

D.   Hip (Coxal) Joint

1.   The hip joint is a ball-and-socket joint that provides a wide range of motion.

2.   Several strong ligaments reinforce the capsule of the hip joint.

3.   The muscle tendons that cross the joint contribute to the stability and strength of the joint, but the majority of the stability of the hip joint is due to the deep socket of the acetabulum and the ligaments.

E.    Knee Joint

1.   The single cavity of the knee joint consists of three joints in one: the femoropatellar joint, the lateral and medial joints between the femoral condyles, and the menisci of the tibia, known collectively as the tibiofemoral joint.

a.   The tibiofemoral joint is a hinge joint, allowing mostly flexion and extension, although limited rotation is possible when the knee is bent.

b.   The femoropatellar joint is a plane joint that allows the patella to glide across the knee when the knee is flexed.

2.   Three types of ligaments stabilize and strengthen the capsule of the knee joint: capsular andextracapsular ligaments prevent hyperextension and rotation when the knee is extended, and cruciate ligaments that keep the articulating bones of the knee aligned.

a.   The knee capsule is reinforced by muscle tendons such as the strong tendons of the quadriceps muscles and the tendon of the semimembranosus.

 

8.6     Joints are easily damaged by injury, inflammation, and degeneration

A.   Common Joint Injuries

1.   Cartilage tears occur when a meniscus is subjected to compression and shear stress at the same time.

2.   Sprains result from stretching or tearing of the ligaments and may repair themselves, although surgical repair may be necessary.

3.   Dislocations occur when the bones are forced out of alignment and are usually accompanied by sprains, inflammation, and immobility of the joint.

B.   Inflammatory and Degenerative Conditions

1.   Bursitis, an inflammation of the bursa, is usually caused by a blow or friction, while tendonitis is inflammation of the tendons, and is usually caused by overuse.

2.   Arthritis describes many inflammatory or degenerative diseases that damage the joints, resulting in pain, stiffness, and swelling of the joint.

a.   Osteoarthritis is the most common chronic arthritis. It is the result of breakdown of articular cartilage and subsequent thickening of bone tissue, which may restrict joint movement.

b.   Rheumatoid arthritis is a chronic inflammatory disorder that is an autoimmune disease.

c.   Gouty arthritis results when uric acid is deposited in the soft tissues of the joints.

3.   Lyme disease is an inflammatory condition caused by a type of spirochete bacteria transmitted by ticks living on deer and mice.





9.1.    There are three types of muscle tissue 

  1. Skeletal muscle is associated with the bony skeleton and consists of large cells that bear striations and are under voluntary control.

  2. Cardiac muscle, found only in the heart, consists of small cells that are striated and under involuntary control.

  3. Smooth muscle is found in the walls of hollow organs, and consists of small, elongated, unstriated cells that are under involuntary control.

  4. Characteristics of Muscle Tissue

  5. Excitability, or responsiveness, is the ability to receive and respond to a stimulus.

  6. Contractility is the ability to contract forcibly when stimulated.

  7. Extensibility is the ability to be stretched.

  8. Elasticity is the ability to resume the cells’ original length once stretched.

  9. Muscle Functions

  10. Muscles produce movement by acting on the bones of the skeleton, pumping blood, or propelling substances throughout hollow organ systems.

  11. Muscles aid in maintaining posture by adjusting the position of the body with respect to gravity.

  12. Muscles stabilize joints by exerting tension around the
    joint.

  13. Muscles generate heat as a function of their cellular metabolic processes.

 

9.2.    A skeletal muscle is made up of muscle fibers, nerves, blood vessels, and connective tissues

  1. Each skeletal muscle is a discrete organ, in which muscle fibers predominate, but also includes blood vessels, nerves, and connective tissue.

  2. Nerve and blood supply allows neural control and ensures adequate nutrient delivery and waste removal.

  3. Connective tissue sheaths are found at various structural levels of each muscle: endomysium surrounds each muscle fiber, perimysium surrounds groups of muscle fibers, and epimysium surrounds whole muscles.

  4. Skeletal muscles span joints and cause movement to occur from the movable attachment (the muscle’s insertion) toward the less movable attachment (the muscle’s origin).

  5. Muscle attachments may be direct, in which the epimysium fuses with the periosteum or perichondrium; or indirect, in which the connective tissue wrappings of the muscle extend into a rope-like or sheet-like structure that attaches to the bone, cartilage, or fascia.

  6. Indirect attachments, either rope-like tendons, or sheet-like aponeuroses, are the most common becausethey are durable and are small in size, conserving space across joints.

 

9.3     Skeletal muscle fibers contain calcium-regulated molecular motors 

  1. Skeletal muscle fibers are large, cylindrical cells with multiple nuclei beneath the sarcolemma, or plasma membrane.

  2. Sarcoplasm, the cytoplasm of a muscle cell, is similar to other types of cells, except it has large amounts of glycosomes, for glycogen storage, and myoglobin, an oxygen-binding pigment similar to hemoglobin.

  3. Myofibrils account for roughly 80% of cellular volume and contain the contractile elements of the muscle cell.

  4. Striations are due to a repeating series of dark A bands and light I bands.

  5. Myofilaments make up the myofibrils and consist of thick and thin filaments.

  6. Striations, alternating dark A bands and light I bands, extend the length of each myofibril.

  7. Each A band has a lighter central region, the H zone, which is bisected vertically by an M line.

  8. Each I band is bisected vertically by a Z disc, and the region extending from one Z disc to the next forms a sarcomere, the smallest contractile unit of a muscle cell.

  9. There are two types of myofilaments in muscle cells: thick filaments composed of bundles of myosin, and thin filaments composed of strands of actin.

  10. Each myosin filament consists of myosin molecules that have a rod-like tail attached to two globular heads that form cross bridges with actin during contraction.

  11. Actin filaments consist of polymerized G actin subunits that have active sites that bind myosin heads during contraction.

  12. 5. Thin filaments also have a set of regulatory proteins: tropomyosin, that wrap around actin filaments, stabilizing it and blocking myosin binding sites; and troponin, which binds to both actin and tropomyosin, and binds calcium ions.

  13. D. The sarcoplasmic reticulum, a smoothendoplasmic reticulum that regulates the availability of calcium ions, surrounds each myofibril, and forms terminal cisterns at the A band–I band junction.

  14. T tubules are infoldings of the sarcolemma that run between the terminal cisterns, formingtriads that conduct electrical impulses into the cell to cause release of calcium ions.

  15. The sliding filament model of muscle contraction states that during contraction, the thin filaments slide past the thick filaments. Overlap between the myofilaments increases and the sarcomere shortens.

 

9.4     Motor neurons stimulate skeletal muscle fibers to contract

  1. The neuromuscular junction is a connection between an axon terminal of a somatic motor neuron and a muscle fiber that is the route of electrical stimulation of the muscle cell

  2. The axon terminal and muscle fiber are separated by a narrow gap, the synaptic cleft.

  3. Within the axon terminal are synaptic vesicles containing the neurotransmitter acetylcholine, or ACh; while junctional folds of the muscle cell contain millions of ACh receptors.

  4. A motor neuron stimulates a skeletal muscle fiber when a nerve impulse causes the releaseof ACh to thesynaptic cleft, which diffuses across the cleft and binds to ACh receptors on the sarcolemma, creating electrical events that lead to the generation of an action potential.

  5. 4. After acetylcholine binds to ACh receptors, an enzyme in the synaptic cleft, acetylcholinesterase, breaks down acetylcholine to acetic acid and choline, to prevent continued contraction in the absence of stimulation.

  6. Generation of an Action Potential across the Sarcolemma

  7. Generation of an end plate potential occurs when ACh binds to ACh receptors at the neuromuscular junction, causing chemically gated ion channels to open: more Na+ diffuses in than K+ diffuses out, and the membrane depolarizes.

  8. The end plate potential triggers an action potential, which propagates along the sarcolemma by causing the opening of voltage gated Na+ channels.

  9. Repolarization occurs when voltage gated Na+channels close, and voltage gated K+ channels open, restoringthe resting polarity to the sarcolemma.

  10. During repolarization, the muscle cell is in a refractory period and may not be depolarized until repolarization is complete.

  11. Excitation-contraction coupling is the sequence of events by which an action potential on the sarcolemma results in the sliding of the myofilaments.

  12. A nerve impulse reaches the axon terminal, causing release of ACh to the synaptic cleft.

  13. ACh binds to ACh receptors in the sarcolemma, and a net influx of sodium ions causes the generation of an end plate potential.

  14. Voltage-gated sodium channels open, allowing the
    generation and propagation of an action potential on the sarcolemma.

  15. Transmission of the action potential along the T tubules, stimulating the release of calcium ions from the sarcoplasmic reticulum to the cytosol.

  16. Muscle Fiber Contraction: Cross Bridge Cycling

  17. As calcium levels in the cytosol increase, calcium binds to troponin, which causes tropomyosin to slide away from the binding sites for myosin on the actin filaments.

  18. Energized myosin heads bind to actin and perform a power stroke, causing actin to slide over myosin.

 

9.5     Temporal summation and motor unit recruitment allow smooth, graded skeletal muscle contractions 

  1. A. A motor unit consists of a motor neuron and all the muscle fibers it innervates. It is smaller in muscles that exhibit fine control.

  2. The muscle twitch is the response of a muscle to a single action potential on its motor neuron, and has three phases: the latent period, corresponding to the lag between stimulation and excitation-contraction coupling, the period of contraction, and the period of relaxation.

  3. Graded Muscle Contractions

  4. 1. Muscle contractions are smooth and vary in strength, leading to different kinds of graded muscle responses.

  5. Temporal summation occurs when impulses reach the muscle in rapid succession, preventing the cell from relaxing between stimulation events, ultimately causing contraction to become sustained, a condition called tetanus.

  6. Multiple motor unit summation (recruitment) involves the response of a muscle to increasing stimulusvoltage: smaller stimuli result in contraction of the smallest motor units, and as voltage increases, larger, more forceful motor units respond, leading to progressively greater contractile force.

  7. Isotonic and Isometric Contractions

  8. 1. Isotonic contractions produce uniform tension in a muscle, once a load has been overcome, and result in movement occurring at the joint and a change of length of muscles.

  9. Concentric isotonic contractions result when a muscle generates force when it shortens, while in eccentric isotonic contractions, the muscle generates force as it lengthens.

  10. Isometric contractions result in increases in muscle tension, but no lengthening or shortening of the muscle occurs, and often are used to maintain posture or joint stability while movement occurs at other joints.

 

9.6       ATP for muscle contraction is produced aerobically or anaerobically 

  1. Providing Energy for Contraction

  2. Muscles contain very little stored ATP, and consumed ATP is replenished rapidly through phosphorylation by creatine phosphate, anaerobic glycolysis, and aerobic respiration.

  3. As muscle metabolism transitions to meet higher demand
    during vigorous exercise, consumed ATP is regenerated by transferring a phosphate to consumed ATP from creatine phosphate, a molecule unique to muscle tissue.

  4. As stored ATP and creatine phosphate are consumed, ATP is produced by breaking down blood glucose or stored glycogen in glycolysis, an anaerobic pathway that precedes both aerobic and anaerobic respiration. If adequate oxygen is not available to support aerobic respiration, anaerobic glycolysis converts the pyruvate formed from glycolysis into lactic acid.

  5. This pathway produces only about 5% the ATP from each glucose compared to the aerobic pathway, but ATP production occurs 2½ times faster.

  6. Most of the lactic acid produced is released to the bloodstream and taken to the liver, heart, or kidneys for use, but the lactic acid that remains in the muscle contributes to muscle soreness following exercise.

  7. Aerobic respiration provides most of the ATP during light to moderate activity, includes glycolysis, along with reactions that occur within the mitochondria, and produces 32 ATP per glucose, as well as water, and CO2, which will be lost from the body in the lungs.

  8. Muscles function aerobically as long as there is adequate oxygen and nutrient delivery to support it, but when exercise demands for ATP exceed the production ability of aerobic reactions, the cell will switch to anaerobic pathways.

  9. B. Muscle fatigue is the physiological inability to contract, and may result from ionic imbalances that interfere with normal excitation-contraction coupling, increased inorganic phosphate in the cytosol, decreased ATP and increased magnesium, or decreased glycogen.

  10. C. Excess postexercise oxygen consumption (EPOC) is the extra oxygen the body requires following exercise to replenish oxygen on myoglobin, reconvert lactic acid to pyruvic acid, replace stored glycogen, and restore ATP and creatine phosphate reserves.

 

9.7     The force, velocity, and duration of skeletal muscle contractions are determined by a variety of factors 

  1. Force of Muscle Contraction

  2. As the number of muscle fibers stimulated increases, force of contraction increases.

  3. Large muscle fibers generate more force than smaller muscle fibers.

  4. As the rate of stimulation increases, contractions sum up, ultimately producing tetanus, allowing the external tension generated by the connective tissue elements to approach internal tension generated by the muscle fibers, increasing contractile force.

  5. The length–tension relationship optimizes the overlap between the thick and thin filaments that produces optimal contraction.

  6. Velocity and Duration of Contraction

  7. There are three muscle fiber types: slow oxidative fibers, fast glycolytic fibers, and fast oxidative fibers.

  8. Slow oxidative fibers contract slowly, rely mostly on aerobic respiration, and are highly fatigue resistant.

  9. Fast glycolytic fibers contract rapidly, use anaerobic respiration, depend heavily on glycogen, but fatigue quickly.

  10. Fast oxidative fibers are a less common, intermediate type of fiber that provide rapid contraction, but have excellent capillary penetration for oxygen and nutrient delivery, and rely on aerobic respiration.

  11. All muscles have varying amounts of all fiber types and, while the proportion of each type is a genetically influenced trait, that proportion can be modified by specific types of exercise.

  12. As the load on a muscle increases, velocity and duration of contraction decreases.

  13. Recruitment of additional motor units increases velocity and duration of contraction.

 

9.8     How does skeletal muscle respond to exercise? 

  1. A. Aerobic exercise promotes an increase in capillary penetration, the number of mitochondria, and synthesis of myoglobin, leading to higher efficiency and endurance, while possibly converting fast glycolytic fibers to fast oxidative fibers.

  2. B. Resistance exercise, such as weight lifting or isometric exercise, promotes an increase in the number of mitochondria, myofilaments and myofibrils, and glycogen storage, producing hypertrophied cells that may change from fast oxidative to fast glycolytic fibers.

 

9.9     Smooth muscle is nonstriated involuntary muscle 

  1. Differences between Smooth and Skeletal Muscle Fibers

  2. Smooth muscle cells are small, spindle-shaped cells with one central nucleus, and lack the coarse connective tissue coverings of skeletal muscle.

  3. Smooth muscle cells are usually arranged into sheets of opposing fibers, forming a longitudinal layer and a circular layer.

  4. Contraction of the opposing layers of muscle leads to a rhythmic form of contraction, called peristalsis, which propels substances through the organs.

  5. Smooth muscle lacks neuromuscular junctions, but has varicosities: numerous bulbous swellings that release neurotransmitters to a wide synaptic cleft.

  6. Smooth muscle cells have a less developed sarcoplasmic reticulum, sequestering large amounts of calcium in extracellular fluid within caveolae in the cell membrane.

  7. Smooth muscle has no striations, no sarcomeres, a lower ratio of thick to thin filaments compared with skeletal muscle, and has tropomyosin but no troponin.

  8. Smooth muscle fibers contain longitudinal bundles of non contractile intermediate filaments anchored to the sarcolemma and surrounding tissues via dense bodies.

  9. Contraction of Smooth Muscle

  10. Mechanism of Contraction

  11. Smooth muscle fibers exhibit slow, synchronized contractions due to electrical coupling by gap junctions.

  12. Like skeletal muscle, actin and myosin interact by the sliding filament mechanism; contraction is triggered by a rise in intracellular calcium level, and the process is energized by ATP.

  13. During excitation-contraction coupling, calcium ions enter the cell from the extracellular space, bind to calmodulin, and activate an enzyme, myosin light chain kinase, powering the cross-bridging cycle.

  14. Smooth muscle contracts more slowly and consumes less ATP than skeletal muscle.

  15. Regulation of Contraction

  16. Autonomic nerve endings release either acetylcholine or norepinephrine, which may result in excitation of certain groups of smooth muscle cells, and inhibition of others.

  17. Hormones and local factors, such as lack of oxygen, histamine, excess carbon dioxide, or low pH, act as signals for contraction.

  18. Special Features of Smooth Muscle Contraction

  19. Smooth muscle initially contracts when stretched, but contraction is brief, and then the cells relax to accommodate the stretch.

  20. Because the muscle filaments have an irregular overlapping pattern, smooth muscle stretches more and generates more tension when stretched than skeletal muscle.

  21. Hyperplasia, an increase in cell number through division, is possible in addition to hypertrophy, an increase in individual cell size.

  22. Types of Smooth Muscle

  23. Unitary smooth muscle, called visceral muscle, is the most common type of smooth muscle. It contracts rhythmically as a unit, is electrically coupled by gap junctions, and exhibits spontaneous action potentials.

  24. Multi-unit smooth muscle is located in large airways to the lungs, large arteries, arrector pili muscles in hair follicles, and the iris of the eye. It consists of cells that are structurally independent of each other, has motor units, and is capable of graded contractions.