Stellar Spectroscopy, Atomic Transitions, and HR Diagrams

Assessment Requirements and Course Schedule

  • Laboratory Sessions and Assignments:

    • The second set of laboratory sessions is currently underway, including the "Sunspots" lab.
    • A new set of tutorial sheets is available for coursework.
    • Students enrolled in course code AS1001AS1001 must submit both the SEA queue (SEAQSEAQ) and the solar system queue by next Monday.
    • Following submission, associated quizzes will open, and dedicated tutorials covering this material will take place the following week.
    • Students enrolled in course code AS1111AS1111 have no laboratory sessions scheduled for the following week; this scheduled break counts toward the final grade evaluation requirement.
    • Completing pre-learning software before laboratory sessions is recommended to avoid entering exercises without prior context.
  • Class Test Logistics (Week 4):

    • Timing: The class test takes place on Wednesday of Week 4.
    • Scope: The test covers all module material delivered up through Wednesday of Week 3.
    • Weighting: The course includes two class tests that together account for 15%15\% of the total module grade (7.5%7.5\% per test).
    • Format: Conducted physically in person using standardized physical examination booklets, mimicking the format of the final degree examination, followed by physical marking.
    • Room Allocations: Most students will take the test in the primary lecture hall, with dedicated overflow and special-arrangement examination rooms set up elsewhere.
    • Revision Session: A formal Q&A and review session takes place exactly one week prior to the test.
  • Academic Support:

    • Students are encouraged to ask questions continuously without hesitation.
    • Questions can be directed to module instructors (Ralph and Rowan), teaching assistants/tutors during weekly sessions, or fellow peers via in-person visits or email.

Stellar Properties and the Red Giant Betelgeuse

  • Physical Characteristics of Betelgeuse:
    • Betelgeuse is a nearby red giant (or red supergiant) star located on the right shoulder of the constellation Orion.
    • It is sufficiently large and close that its spatial diameter can be resolved beyond a mere point source of light.
    • Mass: Approximately 88 solar masses (8 M⊙8\,M_\odot).
    • Dynamics: Exhibits periodic, irregular luminosity and atmospheric pulsations, frequently generating transient reports regarding potential supernova activity.

The Hertzsprung-Russell (HR) Diagram

  • Diagram Structure and Axes:

    • Horizontal Axis: Surface Effective Temperature (TeffT_{\text{eff}}), increasing towards the left (hot, blue stars) and decreasing towards the right (cool, red stars), or Spectral Type.
    • Vertical Axis: Luminosity (LL) relative to the Sun or Absolute Magnitude (MVM_{\text{V}}).
  • Key Regions on the HR Diagram:

    • Main Sequence (Luminosity Class V\text{V}): Contains the majority of active stars during their mature adult lifecycle, where energy is generated via core hydrogen fusion.
    • Giant Branch: Stars evolving away from the main sequence after depleting core hydrogen fuel.
    • White Dwarfs: Compact stellar remnants located in the lower-left region of the diagram, characterized by high temperatures but very low total luminosity.
  • Stellar Radius Trends:

    • Stellar size increases diagonally upwards from the bottom-left to the top-right of the HR diagram.
    • White dwarfs at the bottom-left are approximately Earth-sized (1 R⊕1\,R_\oplus).
    • Main sequence reference: A standard G0\text{G0} main sequence star like the Sun defined at 11 solar radius (1 R⊙1\,R_\odot).
    • Extreme supergiants at the top-right reach radii comparable to the dimensions of the inner solar system.

Photospheric Absorption and Equivalent Width

  • Formation of Stellar Spectra:

    • Continuum Radiation: Originates from the hot, dense stellar interior, producing a blackbody spectrum that determines the overall color and effective surface temperature of the star.
    • Photospheric Absorption Lines: Occur in the cooler, semi-transparent outer photosphere layer above the continuum. As photons escape outward, specific wavelengths are absorbed by atoms and ions, creating dark spectral absorption lines.
    • Information Content: Spectral absorption features encode critical stellar properties, including elemental abundances, chemical composition, surface temperature, metallicity, surface gravity/pressure, and space velocities.
  • Equivalent Width (WλW_\lambda):

    • Purpose: Serves as a standard, quantitative metric to measure the absolute absorption or emission strength of a spectral line.
    • Definition: The width of a hypothetical rectangular spectral line extending down to complete zero flux (00) that encloses an integrated area identical to the actual absorption profile subtracted from the continuum level.
    • Application: Enables direct comparison of spectral line strengths across different stars independent of instrument resolution or line profile shape variations.

Atomic Transitions and Quantum Mechanics

  • Atomic Energy Levels:

    • An atom consists of a positively charged nucleus (protons and neutrons) orbited by bound electrons existing in discrete, quantized energy states.
    • Transitions between discrete energy states require exact energy exchanges via photons.
    • Upward Transition (Absorption): An electron absorbs a photon with energy precisely equal to the difference between energy levels (ΔE\Delta E).
    • Downward Transition (Emission): An electron drops to a lower state, emitting a photon carrying energy precisely equal to ΔE\Delta E.
  • Photon Energy and Wavelength Equations:

    • Photon Energy: E=hf=hνE = h f = h \nu
    • Relation to Wavelength: E=hcλE = \frac{h c}{\lambda}
    • Constant Definitions: hh is Planck's constant, ff or ν\nu is photon frequency, cc is the speed of light, and λ\lambda is photon wavelength.
    • Proportionality: Higher frequency (ff) and shorter wavelength (λ\lambda) correspond directly to higher photon energy. Consequently, blue photons carry significantly higher energy than red photons.
    • Units: Atomic energy level differences are measured in electron-volts (eVeV), representing small fractions of a Joule.

Hydrogen Spectral Series and the Rydberg Formula

  • Hydrogen Level Structure:

    • Ground State: Principal quantum number n=1n = 1.
    • Ionization Threshold: Total ionization from the ground state (n=1→n=∞n = 1 \rightarrow n = \infty) requires 13.6 eV13.6\,eV of energy, corresponding to the Lyman Limit wavelength of 91.218 nm91.218\,nm.
  • Hydrogen Spectral Series:

    • Lyman Series (nlower=1n_{\text{lower}} = 1):
    • Transitions involving the ground state (n=1n = 1).
    • Lyman-Alpha (Lyα\text{Ly}\alpha): Transition between n=1n = 1 and n=2n = 2, corresponding to an energy change of approximately 10 eV10\,eV and a wavelength of 121 nm121\,nm.
    • Wavelength Range: All Lyman series transitions fall within the Ultraviolet (UV) spectrum.
    • Balmer Series (nlower=2n_{\text{lower}} = 2):
    • Transitions involving the first excited state (n=2n = 2).
    • Wavelength Range: Falls primarily within the visible light spectrum, making it essential for optical spectroscopy.
    • Hα\text{H}\alpha Line: Transition between n=2n = 2 and n=3n = 3.
    • Hβ\text{H}\beta Line: Transition between n=2n = 2 and n=4n = 4.
    • Paschen Series (nlower=3n_{\text{lower}} = 3):
    • Transitions involving the second excited state (n=3n = 3), producing low-energy photons in the Infrared (IR) spectrum.
  • The Rydberg Formula:

    • Equation: 1λ=R(1nlower2−1nupper2)\frac{1}{\lambda} = R \left( \frac{1}{n_{\text{lower}}^2} - \frac{1}{n_{\text{upper}}^2} \right)
    • Variables: RR represents the Rydberg constant, nlowern_{\text{lower}} represents the lower quantum level, and nuppern_{\text{upper}} represents the upper quantum level.

Stellar Spectral Sequence and Ionization States

  • Spectral Sequence Order:

    • Main classes ordered from hottest to coolest: O, B, A, F, G, K, M\text{O, B, A, F, G, K, M}.
    • Numerical Subclasses: Each class is divided into subclasses from 00 (hottest) to 99 (coolest) (e.g., A0\text{A0}, G2\text{G2}, K5\text{K5}).
  • Ionization Nomenclature:

    • Roman Numeral I\text{I} (e.g., He I\text{He I}): Denotes a neutral atom retaining its full complement of electrons.
    • Roman Numeral II\text{II} (e.g., He II\text{He II}): Denotes a singly ionized atom that has lost one electron.
  • Temperature Phenomena across Spectral Types:

    • O\text{O} and B\text{B} Stars (Hot / Blue): Extreme temperatures ionize most hydrogen, weakening hydrogen lines. Ionized helium (He II\text{He II}) and neutral helium (He I\text{He I}) lines dominate due to high excitation requirements.
    • A\text{A} Stars: Possess optimal surface temperatures (∼10,000 K\sim 10,000\,K) for populating the n=2n = 2 energy level of hydrogen, exhibiting peak Balmer hydrogen line strengths.
    • K\text{K} and M\text{M} Stars (Cool / Red): Low surface temperatures allow neutral metals, ionized metals, and complex molecular species (e.g., Titanium Oxide, TiO\text{TiO}) to survive without thermal dissociation.

Luminosity Classes and Chemical Definitions

  • Standard Spectral Classification Format:

    • Combines Spectral Type, Subclass, and Luminosity Class (e.g., K5III\text{K5III}, A0V\text{A0V}).
  • Luminosity Classes (Roman Numerals):

    • Class I\text{I} (Ia\text{Ia} / Ib\text{Ib}): Supergiants.
    • Class II\text{II}: Bright Giants.
    • Class III\text{III}: Normal Giants.
    • Class IV\text{IV}: Subgiants.
    • Class V\text{V}: Main Sequence Stars (Dwarfs).
  • Astronomical Terminology:

    • Dwarf Classification: All main sequence stars (including the Sun, a G2V\text{G2V} star) are formally termed dwarfs.
    • Astronomical Definition of "Metals": In astrophysics, all chemical elements heavier than Hydrogen (H\text{H}) and Helium (He\text{He}) are classified as metals (including carbon, oxygen, nitrogen, and titanium).

Questions & Discussion

  • Question: What proportion of the module grade do the class tests represent?

    • Response: The two class tests collectively account for 15%15\% of the final grade, representing 7.5%7.5\% each.
  • Question: What does the astronomical notation He II\text{He II} indicate?

    • Response: It indicates singly ionized helium (helium that has lost one electron). Neutral helium with its full electron complement is designated as He I\text{He I}.
  • Question: Which energy level transition corresponds to an Hα\text{H}\alpha Balmer emission line?

    • Response: An electron dropping from level n=3n = 3 to level n=2n = 2. For an absorption line, the electron transitions upwards from level n=2n = 2 to level n=3n = 3.