Measurements in Science

Learning Objectives for Measurements in Science

  • Differentiate between the concepts of precision and accuracy.

  • Determine the number of significant figures present in a given number.

  • Express measurements using the correct number of significant figures.

  • Write measurements in scientific notation form.

  • Convert numbers into scientific notation and vice versa.

Precision versus Accuracy

  • Accuracy: Refers to how close a measured value is relative to a standard or accepted value.

  • Precision: Refers to how close a series of measured values are to one another, regardless of whether they are close to the standard.

Examples of Precision and Accuracy

  • Example 1: The standard measure of a table’s length is 16 cm16\,cm. A student collects three measurements: 15.54 cm15.54\,cm, 16.01 cm16.01\,cm, and 16.05 cm16.05\,cm. The analysis would determine if these trials are accurate (near 16 cm16\,cm) or precise (close to each other).

  • Example 2: Four students measured an unknown substance with a standard mass of 80.06 g80.06\,g. Each student used a different scale and performed three trials.

    • Student A: Trial 1: 48.70 g48.70\,g, Trial 2: 55.50 g55.50\,g, Trial 3: 70.03 g70.03\,g. Total: 174.23 g174.23\,g. Average: 58.08 g58.08\,g. (Neither accurate nor precise).

    • Student B: Trial 1: 75.83 g75.83\,g, Trial 2: 54.98 g54.98\,g, Trial 3: 109.00 g109.00\,g. Total: 239.81 g239.81\,g. Average: 79.94 g79.94\,g. (Inaccurate average though close to standard, values are highly imprecise).

    • Student C: Trial 1: 79.05 g79.05\,g, Trial 2: 80.15 g80.15\,g, Trial 3: 81.00 g81.00\,g. Total: 240.20 g240.20\,g. Average: 80.06 g80.06\,g. (Both accurate and precise; this scale is recommended).

    • Student D: Trial 1: 60.25 g60.25\,g, Trial 2: 58.08 g58.08\,g, Trial 3: 59.11 g59.11\,g. Total: 177.44 g177.44\,g. Average: 59.15 g59.15\,g. (Precise, but not accurate).

Significant Figures (Sig Figs)

  • Definition: Significant figures pertain to the digits or figures that are certain to give reasonably reliable information. They help attain a level of certainty when expressing a calculated quantity.

Rules in Determining Significant Figures

  • Rule 1: All nonzero digits (11 to 99) are significant.

    • Example: 749 mL749\,mL has 33 significant figures.

    • Example: 1 593 587 s1\,593\,587\,s has 77 significant figures.

    • Example: 16.21 L16.21\,L has 44 significant figures.

  • Rule 2: Zeros to the left of the first nonzero digit (leading zeros) are NOT significant.

    • Example: 0.560.56 has 22 significant figures.

    • Example: 0.0058690.005869 has 44 significant figures.

    • Example: 0.000010.00001 has 11 significant figure.

  • Rule 3: Zeros between nonzero digits (trapped zeros) are significant.

    • Example: 4036 g4036\,g has 44 significant figures.

    • Example: 7.02 g7.02\,g has 33 significant figures.

    • Example: 5.39000075.3900007 has 88 significant figures.

  • Rule 4: Zeros to the right of a nonzero digit (trailing zeros) in a number with a decimal point ARE significant.

    • Example: 95.70 mm95.70\,mm has 44 significant figures.

    • Example: 1.00 g1.00\,g has 33 significant figures.

    • Example: 1895.0 cm1895.0\,cm has 55 significant figures.

  • Rule 5: Zeros at the end of a nonzero digit without a decimal point are NOT significant.

    • Example: 300 km300\,km has 11 significant figure.

    • Example: 14 500 km14\,500\,km has 33 significant figures.

    • Example: 8 220 km8\,220\,km has 33 significant figures.

Significant Figures in Calculations

  • Premise: A final answer may not be more accurate than the least accurate measurement used in the calculation.

  • Addition and Subtraction: The answer should have the same number of decimal places as the measurement with the least number of decimal places.

    • Example: 2.051 mm2.051\,mm (33 decimal places) + 3.56 mm3.56\,mm (22 decimal places) + 72.1 mm72.1\,mm (11 decimal place) = 77.711 mm77.711\,mm. Final Answer: 77.7 mm77.7\,mm.

  • Multiplication and Division: The answer should have the same number of total significant figures as the measurement with the least number of significant figures.

    • Example: 7.065 m7.065\,m (44 sig figs) ×\times 12.0 m12.0\,m (33 sig figs) = 84.78 m284.78\,m^2. Final Answer: 84.8 m284.8\,m^2.

Practice Problems

  • Solve the following, expressing answers to correct sig figs:

    • 32.63 g−5.2 g32.63\,g - 5.2\,g

    • 162.05 m/3.2 s162.05\,m / 3.2\,s

  • Identify the number of significant figures:

    • 856.000 m856.000\,m

    • 0.0007640 s0.0007640\,s

    • 5 000 000 g5\,000\,000\,g

  • Calculation Practice:

    • 56.0 s+135.002 s+12 s56.0\,s + 135.002\,s + 12\,s

    • 999 km/3.003 hr999\,km / 3.003\,hr

Reading Measurements

  • When using a graduated cylinder, always measure the volume at the meniscus.

  • Measurement readings must be taken at eye level to avoid parallax error.

Scientific Notation

  • Definition: A way to express extremely large or small numbers efficiently.

  • Parts: It consists of three parts: the coefficient, the base (1010), and the exponent.

  • Example: In 1.6×1021.6 \times 10^2, 1.61.6 is the coefficient and 22 is the exponent.

  • Converting Standard Form to Scientific Notation:

    • 183 000 000 000=1.83×1011183\,000\,000\,000 = 1.83 \times 10^{11}

    • 0.0000000000512=5.12×10−110.0000000000512 = 5.12 \times 10^{-11}

  • Converting Scientific Notation to Standard Form:

    • 2.85×106=2 850 0002.85 \times 10^6 = 2\,850\,000

    • 6.134×10−9=0.0000000061346.134 \times 10^{-9} = 0.000000006134

Additional Practice

  • Convert to scientific notation:

    • 0.000 000 000 000 736 50.000\,000\,000\,000\,736\,5

    • 0.000 000 009 990.000\,000\,009\,99

    • 1 050 000 0001\,050\,000\,000

    • 8 000 000 000 000 000 0008\,000\,000\,000\,000\,000\,000

  • Convert to standard form:

    • 1.05×10151.05 \times 10^{15}

    • 7.895×1077.895 \times 10^7

    • 9.00×10−99.00 \times 10^{-9}

    • 2.65519×10−112.65519 \times 10^{-11}