week 1
Introduction to Fluid Mechanics
Fluid mechanics is the branch of mechanics that studies the behavior of fluids (liquids and gases) in motion and at rest.
It is a form of mechanics, analogous to solid mechanics, which deals with solid bodies.
Differences Between Solid Mechanics and Fluid Mechanics
Fluid mechanics involves forces, energy, motion, and deformation, similar to solid mechanics, but with a key difference:
Fluid Definition: A fluid is a substance that continuously deforms under an applied shear stress, meaning it flows and changes shape.
Example: Water behind a dam can rise and overcome the dam, flowing down continuously.
Shear Stress in Fluids
When fluids flow, different particles move at different velocities, creating shear stress between those particles due to friction created by differences in velocity.
Shear Stress Calculation: Shear stress can be calculated based on the shear force developed due to friction between these fluid layers.
Definitions in Water Engineering
Key terms related to fluid mechanics include:
Hydraulics: Study of the behavior of liquids in motion.
Hydrology: The study of water distribution across Earth.
Computational Fluid Dynamics (CFD): Numerical analysis of fluid flow - gaining popularity for solving complex fluid problems.
Applications of Fluid Mechanics
Fluid mechanics has numerous applications in various fields:
Aerodynamics: Study of fluid flow around objects, particularly in air.
Environmental Engineering: Groundwater movement and flows.
Petroleum Engineering: Movement of petroleum and other fluids in pipelines.
Atmospheric Sciences: Understanding the flow of gases in the atmosphere.
Basic SI Units in Fluid Mechanics
Fundamental SI units:
Length (L): meter (m)
Mass (M): kilogram (kg)
Time (T): second (s)
Temperature (Θ): kelvin (K) derived from Celsius by adding 273 to Celsius value (e.g., 10 °C = 283 K)
Common SI Prefixes Used
kilo (k):
mega (M):
giga (G):
centi (c):
milli (m):
micro (μ):
nano (n):
pico (p):
Derived Units
Key derived units in fluid mechanics include:
Acceleration (a):
Force (F): (weight can be expressed as , where g is acceleration due to gravity).
Density (ρ):
Specific Weight (γ):
Pressure (P): (or Pascal, Pa)
Work (W) and Energy (E):
Power (P): (watts, W)
Viscosity (μ): ( = N imes s/m^{2})
Non-dimensional Numbers in Fluid Mechanics
Important dimensionless groups related to fluid dynamics:
Reynolds Number (Re): Determines flow regime; given by:
: density, : velocity, : diameter of pipe, : dynamic viscosity.
Froude Number (Fr): Used in open channel flow.
Mach Number (M): Used in aerodynamic studies (ratio of fluid speed to sound speed).
Density
Defined as mass per unit volume:
Example values:
Water at 4 °C: 1000 kg/m³
Mercury at 20 °C: 13,550 kg/m³
Air at 20 °C (standard pressure): 1.2 kg/m³
Density varies with temperature and pressure (gas density affected by both; liquid density typically affected only by temperature).
Specific Gravity
Ratio of the density of a substance to the density of water:
Example: Specific gravity of mercury compared to water.
Ideal Gas Law
Expresses the relationship of gas density under varying pressure and temperature:
Where R is the gas constant.
For air, .
Bulk Modulus of Elasticity
Defined as the measure of a fluid's response to pressure changes.
High value indicates incompressibility (example: Water ).
Compressibility
Inverse of bulk modulus of elasticity:
Water is observed as highly incompressible, while gases are compressible.
Viscosity
Dynamic Viscosity (μ): Measure of a fluid's resistance to shear stress.
Units: Pascal seconds or Newton seconds/m².
Kinematic Viscosity (ν): Defined as dynamic viscosity divided by density:
Units: m²/s.
Shear Stress Relationship
Shear stress () is related to strain rate () where is the velocity change with respect to depth, yielding:
Newtonian vs Non-Newtonian Fluids
Newtonian Fluids: Viscosity remains constant regardless of the shear rate.
Non-Newtonian Fluids: Viscosity changes with shear rate (e.g., ketchup, toothpaste).
Bingham Plastics: Behaves as solids until a certain shear stress, then flows like a fluid.
Surface Tension
Defined as force per unit length acting at the surface of a liquid.
Arises due to cohesive forces among similar fluids and adhesive forces between dissimilar fluids.
Vapor Pressure
The pressure at which a liquid will boil at a given temperature. - Water boils at 100 °C under standard atmospheric pressure, but can boil at lower temperatures under reduced pressure.
Relevant to fluid dynamics, especially concerning pipelines (risk of cavitation).
Conclusion
Knowledge of fluid mechanics is essential for various engineering applications. Understanding the properties, behaviors, and various calculations of fluids will facilitate design and analysis in real-world scenarios.