Anchorage Length Specifications for Concrete Beams
Concrete Beams with Compressive Strength fc′=280kg/cm2
Straight Anchorage Length (Ld)
- The straight anchorage length Ld depends on the bar position (superior/top reinforcement vs. inferior/bottom reinforcement) and bar diameter:
- Bar diameter 3/8′′:
- Superior position (sup.): 0.40m
- Inferior position (inf.): 0.30m
- Bar diameter 1/2′′:
- Superior position (sup.): 0.55m
- Inferior position (inf.): 0.40m
- Bar diameter 5/8′′:
- Superior position (sup.): 0.65m
- Inferior position (inf.): 0.50m
- Bar diameter 3/4′′:
- Superior position (sup.): 0.80m
- Inferior position (inf.): 0.60m
- Bar diameter 1′′:
- Superior position (sup.): 1.30m
- Inferior position (inf.): 1.00m
- Bar diameter 13/8′′:
- Superior position (sup.): 1.75m
- Inferior position (inf.): 1.35m
Standard Hook Anchorage Length (Ldg)
- The standard hook anchorage length Ldg is specified according to bar diameter:
- Bar diameter 3/8′′: 0.20m
- Bar diameter 1/2′′: 0.25m
- Bar diameter 5/8′′: 0.35m
- Bar diameter 3/4′′: 0.40m
- Bar diameter 1′′: 0.50m
Structural Details and Dimensions
- Dimension callouts and reinforcement details for 280kg/cm2 structural beams:
- Longitudinal dimension mark: 0.80m
- Transverse dimension mark: 0.40m
- Bar callouts: 2ϕ3/4′′ (indicated as 203/4′′) and 243/4′′
Concrete Beams with Compressive Strength fc′=210kg/cm2
Straight Anchorage Length (Ld)
- The straight anchorage length Ld depends on the bar position (superior/top reinforcement vs. inferior/bottom reinforcement) and bar diameter:
- Bar diameter 3/8′′:
- Superior position (sup.): 0.45m
- Inferior position (inf.): 0.35m
- Bar diameter 1/2′′:
- Superior position (sup.): 0.60m
- Inferior position (inf.): 0.45m
- Bar diameter 5/8′′:
- Superior position (sup.): 0.75m
- Inferior position (inf.): 0.60m
- Bar diameter 3/4′′:
- Superior position (sup.): 0.90m
- Inferior position (inf.): 0.70m
- Bar diameter 1′′:
- Superior position (sup.): 1.45m
- Inferior position (inf.): 1.15m
- Bar diameter 13/8′′:
- Superior position (sup.): 2.00m
- Inferior position (inf.): 1.55m
Standard Hook Anchorage Length (Ldg)
- The standard hook anchorage length Ldg is specified according to bar diameter:
- Bar diameter 3/8′′: 0.20m
- Bar diameter 1/2′′: 0.30m
- Bar diameter 5/8′′: 0.35m
- Bar diameter 3/4′′: 0.45m
- Bar diameter 1′′: 0.0055m (or 0.55m standard equivalency)
Structural Details and Dimensions
- Dimension callouts and reinforcement details for 210kg/cm2 structural beams:
- Extension/dimension mark: 0.90m
- Transverse dimension mark: 0.10m
- Rebar callouts: 2ϕ3/4′′ (indicated as 2P3/4′′ and 203/4′′)
- Additional structural annotations: 23, ENC