Chemical Quantities, Reactions, Solutions, and Acid-Base Equilibrium Study Guide
Chemical Quantities, Atomic Mass, and the Mole
Atomic Mass Unit Definition:
The mass of an individual atom is extremely small.
The atomic mass unit () is defined such that:
The periodic table lists the mass of each element in .
Converting Atomic Mass from AMU to Grams:
Mass of atom:
Mass of atom:
Mass of atom:
The Mole Concept and Avogadro's Number:
Laboratory procedures use gram or kilogram quantities, requiring immense numbers of atoms, molecules, or ions.
The mole () is the unit used to package particles for counting.
Mole (): The amount of substance that contains Avogadro's number of particles.
Avogadro's Number: .
of any substance contains particles (atoms, ions, molecules, or formula units).
Formula Unit: The smallest collection of ions that:
Tells what ions are present in an ionic compound.
Gives the relative number of each ion.
Equivalences and Particle Conversions:
Worked Example: Converting Moles to Atoms:
Problem: Calculate the number of carbon atoms in of graphite (a form of carbon).
Calculation:
Rounded to 3 significant figures: .
Worked Example: Converting Atoms to Moles:
Problem: Calculate the number of moles of sodium corresponding to atoms of sodium.
Calculation:
Rounded to 2 significant figures: .
Moles of Elements in a Chemical Compound:
Subscripts in a chemical formula indicate both the number of atoms of each element in a single molecule/formula unit and the number of moles of each element in of the compound.
Example — Ibuprofen ():
Non-steroidal anti-inflammatory drug (NSAID) used for pain, fever, and inflammation; active ingredient in Advil and Motrin.
Carbon: atoms per molecule; .
Hydrogen: atoms per molecule; .
Oxygen: atoms per molecule; .
Molar Mass and Stoichiometric Calculations
Molar Mass Definition and Determination:
Molar Mass: The mass in grams of one mole of an element or compound, equal to its atomic or formula weight in .
To calculate molar mass, multiply the atomic mass of each element by its formula subscript and sum the results.
Molar Mass Calculations:
Water ():
Hydrogen:
Oxygen:
Total Molar Mass
Potassium Perbromate ():
Potassium ():
Bromine ():
Oxygen ():
Total Molar Mass
Glucose ():
Carbon ():
Hydrogen ():
Oxygen ():
Total Molar Mass
Calculations Using Molar Mass Conversion Factors:
General conversion equality: .
Problem 1: Moles of Helium in Mass:
Determine the moles of in of .
Equality:
Calculation:
Problem 2: Moles of Allyl Sulfide:
Allyl sulfide, , gives garlic, onions, and leeks their characteristic odor. Find moles in
Expanded formula:
Molar mass calculation:
Calculation:
Problem 3: Grams of Potassium Iodide:
Potassium iodide () is used as an expectorant. Calculate grams in of
Molar mass calculation:
Calculation:
Comprehensive Interconversion Roadmap:
Mass (grams) can be converted to Moles using Molar Mass ().
Moles can be converted to Particles (atoms, ions, molecules, formula units) using Avogadro's Number ().
Moles of compound can be converted to Moles of element using Formula Subscripts.
Particles of compound can be converted to Particles of element using Formula Subscripts.

Chemical Reactions and Balancing Equations
Chemical Equations and Conservation of Mass:
Chemical Reaction: A chemical change converting starting materials (reactants) into new substances (products).
Law of Conservation of Mass: Matter cannot be created or destroyed in a chemical reaction. The number and types of atoms before a reaction must equal the number and types of atoms after a reaction.
Anatomy of a Chemical Equation:
Generic Form:
Reactants (): Written on the left side of the arrow.
Products (): Written on the right side of the arrow.
Arrow (): Indicates direction of reaction, meaning "react to form".
Coefficients (): Numbers placed in front of chemical formulas indicating relative mole or particle ratios.
Physical States: Indicated in parentheses following chemical formulas:
= gas
= solid
= liquid
= aqueous solution (dissolved in water)
Reaction Conditions: Written above or below the arrow (e.g., for heat, light, catalysts, or specific solvents).
Step-by-Step Balancing Process — Combustion of Propane:
Unbalanced equation:
Initial Atom Balance Sheet:
Reactants: , ,
Products: , ,
Step 1: Balance Carbon atoms by placing a coefficient of in front of :
Products Atom Count: , ,
Step 2: Balance Hydrogen atoms by placing a coefficient of in front of :
Products Atom Count: , ,
Step 3: Balance Oxygen atoms by placing a coefficient of in front of :
Final Atom Count: Reactants () = Products ().
Note: Balanced chemical equations must use the lowest set of whole-number coefficients.
Balancing Equations Containing Polyatomic Ions:
When polyatomic ions remain intact on both sides of a reaction, treat them as single discrete units.
Reaction example:
Initial Unit Count:
Reactants: , , ,
Products: , , ,
Place a coefficient of in front of :
Final Unit Count: Reactants () = Products ().
Oxidation-Reduction Reactions
Fundamental Definitions:
Oxidation-Reduction (Redox) reactions involve the transfer of electrons between chemical species.
Mnemonic: OIL RIG
Oxidation Is Loss of electrons.
Reduction Is Gain of electrons.
Experimental Demonstration — Zinc Metal in Aqueous Copper(II) Solution:
When a zinc metal strip () is submerged in a blue solution containing ions:
Solid zinc atoms lose electrons each and are oxidized into zinc ions () entering the solution.
ions accept electrons each and are reduced to solid copper metal (), plating out onto the zinc strip.
The blue color of fades as colorless ions replace them.
Half-Reactions:
Oxidation half-reaction:
Reduction half-reaction:
Oxidation and reduction always occur simultaneously; lost electrons must equal gained electrons.

Alternative Viewpoints of Redox:
Oxidation can also be defined as the gain of oxygen or the loss of hydrogen.
Reduction can also be defined as the loss of oxygen or the gain of hydrogen.
Combustion: A redox reaction where a compound reacts rapidly with .
Respiration: Biological redox reactions that oxidize carbon-containing molecules to extract cellular energy.
Energetics and Rates of Chemical Reactions
Collision Theory Requirements:
For a chemical reaction to take place, three conditions must be satisfied:
Reactant particles must collide.
Reactant particles must collide in the proper orientation.
Reactant particles must collide with sufficient energy (effective collision) to break chemical bonds.
Activation Energy () and Transition State:
Activation Energy (): The minimum quantity of energy required upon collision for a reaction to occur.
Transition State: An unstable, high-energy arrangement of atoms at the peak of the activation energy barrier where original bonds are breaking and new bonds are forming.

Exothermic vs. Endothermic Reactions:
Heat of Reaction (): The net difference between the energy of the reactants and the energy of the products.
Exothermic Reaction: Releases heat energy to surroundings; energy of reactants is greater than energy of products ().

Endothermic Reaction: Absorbs heat energy from surroundings; energy of products is greater than energy of reactants ().

Factors Affecting Reaction Rates:
Temperature: Increasing temperature increases the kinetic energy of particles, raising collision frequency and collision force, thereby increasing reaction rate.
Reactant Concentration: Increasing reactant concentration increases particle density, raising collision frequency and overall reaction rate.
Catalysts: A catalyst increases reaction rate without being consumed in the process by providing an alternate reaction pathway with a lower activation energy ().

Solutions and Solubility
Solution Fundamentals:
Solution: A homogeneous mixture uniform in composition throughout.
Solute: Component dissolved in the solvent, present in smaller quantity.
Solvent: Substance in which the solute dissolves, present in larger quantity.
Classification and Examples of Solutions:
Gas Solutions:
Gas in Gas: Air (Solute: , Solvent: ).
Liquid Solutions:
Gas in Liquid: Soda water (Solute: , Solvent: ), Household ammonia (Solute: , Solvent: ).
Liquid in Liquid: Vinegar (Solute: , Solvent: ).
Solid in Liquid: Seawater (Solute: , Solvent: ), Tincture of iodine (Solute: , Solvent: ).
Solid Solutions:
Solid in Solid: Brass (Solute: , Solvent: ), Steel (Solute: , Solvent: ).

Intermolecular Solute-Solvent Interactions:
Primary rule of solubility: "Like dissolves like".
Polar/ionic compounds dissolve in polar solvents (e.g., or sugar dissolving in polar water).
Ionic dissolution in water: Water molecules surround individual ions ( surrounded by partial negative oxygen atoms, surrounded by partial positive hydrogen atoms) in a process called hydration.
Nonpolar compounds dissolve in nonpolar solvents (e.g., oil or grease dissolving in nonpolar solvents like hexane or benzene).
Nonpolar compounds lack partial charges and cannot form favorable dipole-dipole or hydrogen bonding interactions with polar solvents like water, making them insoluble in water.
Solubility Terminology and Temperature Effects:
Solubility: The maximum quantity of solute that dissolves in a specified volume/mass of solvent at a given temperature.
Unsaturated Solution: Contains less solute than the maximum solubility limit.
Saturated Solution: Contains the maximum equilibrium amount of dissolved solute; additional added solute remains undissolved.
Supersaturated Solution: Unstable solution containing more dissolved solute than the equilibrium maximum; prepared by dissolving solute at high temperatures and cooling slowly without disturbance.
Temperature Dependence:
Solids in liquids: Solubility generally increases as temperature increases.
Gases in liquids: Solubility decreases as temperature increases.

Henry's Law and Gas Solubility:
Henry's Law: The solubility () of a gas in a liquid is directly proportional to the partial pressure () of that gas above the liquid.
Higher pressure = higher gas solubility.
Opening a carbonated beverage container releases pressure, causing dissolved to rapidly bubble out of solution.

Clinical Applications:
Hyperbaric Oxygen Therapy: High-pressure oxygen chambers force increased quantities of dissolved into blood plasma to treat gangrene or carbon monoxide poisoning.
Decompression Sickness ("The Bends"): Deep-sea divers ascending too rapidly experience pressure drops that cause dissolved nitrogen gas to form painful bubbles in blood vessels and joints.
Solubility Rules for Ionic Compounds in Water:
An ionic compound is soluble in water if it contains at least one of the following:
Cations: (Always soluble without exception).
Anions:
(Always soluble without exception).
(Soluble except with ).
(Soluble except with ).
Compounds lacking any of these ions are generally insoluble.

Predicting Water Solubility:
: Soluble (contains and ).
: Insoluble (does not contain any listed soluble cation or anion).
: Soluble (contains ).
Electrolytes and Clinical Equivalents
Electrolytes vs. Nonelectrolytes:
Electrolyte Solution: Solution containing mobile ions capable of conducting electricity.
Nonelectrolyte Solution: Solution containing dissolved molecular compounds that do not ionize and cannot conduct electricity (e.g., methanol , sucrose).
Strong Electrolyte: Solute dissociates or ionizes completely () in water, strongly conducting current (bright light bulb; e.g., soluble salts like , strong acids like ).

Weak Electrolyte: Solute ionizes only partially in water, weakly conducting current (dim light bulb; e.g., weak acids like , weak bases like ).
Nonelectrolyte: Solute remains intact as molecules (light bulb stays dark).

Clinical Equivalents ( and ):
Equivalent (): The amount of an ion that carries of electrical charge (positive or negative).
Milliequivalents (): .
Charge-to-Equivalent Ratios:
Monovalent ions ( or ):
Cations:
Anions:
Divalent ions ( or ):
Cations:
Anions:
Trivalent ions ( or ):
Cations:
Anions:

Electroneutrality principle: In any biological fluid or IV solution, total positive charge () equals total negative charge ().
Clinical Calculations Involving Equivalents:
Problem 1a: Find equivalents in of :
Problem 1b: Find equivalents in of :
Problem 2: Ringer's IV solution contains cations: , , . If is the sole anion, determine its concentration:
Problem 3: Saline solution contains each of and . Calculate moles of and in :
Quantitative Concentration Units
Mass Percent :
Example 1: Calculate when of is dissolved in of :
Example 2: Calculate grams of required to prepare of a solution:
Volume Percent :
Example 1: Calculate of rubbing alcohol if of isopropyl alcohol is in solution:
Example 2: Volume of acetic acid needed to prepare of solution:
Mass/Volume Percent :
Example 1: Dextrose () IV solution containing dissolved in solution:
Example 2: Normal saline () has the same osmotic pressure as human blood. Find grams of in ():
Molarity ():
Example 1: Molarity of solution with dissolved in () water:
Moles of :
Molarity:
Example 2: Molarity of glucose (, molar mass ) dissolved in () water:
Moles of glucose:
Molarity:
Example 3: Preparation of () of solution:
Moles needed:
Molar mass
Mass needed:
Dilutions, Mixtures, and Osmotic Properties
Dilution Equation and Calculation:
Adding solvent to a concentrated stock solution increases volume while keeping solute moles constant.
Problem: Prepare of sucrose from stock sucrose solution.
Given: , ,
Solve for :
Procedure: Measure of stock solution and add water until final volume reaches .
Comparison of Solutions, Colloids, and Suspensions:
Solutions: Small particles (atoms, ions, small molecules); no settling; cannot be separated by filters or semipermeable membranes.
Colloids: Medium particles (larger molecules/aggregates); no settling; cannot be filtered, but CAN be separated by semipermeable membranes.
Suspensions: Heterogeneous mixtures with very large visible particles; settle rapidly; CAN be separated by filters.

Types of Colloidal Systems:
Gas in Liquid: Whipped cream
Gas in Solid: Marshmallows
Liquid in Gas: Clouds, fog
Liquid in Liquid: Milk, mayonnaise
Liquid in Solid: Cheese, butter
Solid in Gas: Smoke
Solid in Liquid: Jelly
Solid in Solid: Dried paint
Osmosis and Osmotic Pressure:
Osmosis: Flow of solvent (water) across a semipermeable membrane from lower solute concentration to higher solute concentration to dilute the concentrated side.
Osmotic Pressure: The hydrostatic pressure required to halt the osmotic flow of solvent across the semipermeable membrane.
Behavior of Cells in Solutions of Varying Tonicity:
Isotonic Solution: Solution osmotic pressure equals intracellular osmotic pressure (e.g., or glucose). Water flow in and out is equal; red blood cells retain normal shape.

Hypotonic Solution: Solute concentration outside cell is lower than inside. Water flows INTO the cell, causing it to swell and burst (hemolysis).

Hypertonic Solution: Solute concentration outside cell is higher than inside. Water flows OUT of the cell, causing it to shrivel (crenation).

Acids, Bases, and Equilibrium
General Physical & Chemical Properties:
Acids: Sour taste, react with metals to generate , turn litmus red, secreted in stomach ().
Bases: Bitter taste, slippery feel, turn litmus blue, used in household cleaning products (ammonia, lye).
Arrhenius Definition:
Arrhenius Acid: Produces hydrogen ions ( / hydronium ) in aqueous solution.
Arrhenius Base: Produces hydroxide ions () in aqueous solution.
Examples: .
Nomenclature of Acids:
Binary Acids (simple nonmetal anions): Prefix "hydro-" + root + "-ic acid" (e.g., = Hydrochloric acid, = Hydrobromic acid, = Hydroiodic acid, = Hydrocyanic acid).
Oxyacids (polyatomic anions with oxygen):
Anion ending in "-ate" acid ending in "-ic acid".
Anion ending in "-ite" acid ending in "-ous acid".
Acid and Anion Reference Chart:
: Perchloric acid (Anion: Perchlorate)
: Chloric acid (Anion: Chlorate)
: Chlorous acid (Anion: Chlorite)
: Hypochlorous acid (Anion: Hypochlorite)
: Nitric acid (Anion: Nitrate)
: Nitrous acid (Anion: Nitrite)
: Sulfuric acid (Anion: Sulfate)
: Sulfurous acid (Anion: Sulfite)
: Carbonic acid (Anion: Carbonate)
: Acetic acid (Anion: Acetate)
: Phosphoric acid (Anion: Phosphate)
: Phosphorous acid (Anion: Phosphite)
Brønsted-Lowry Model and Conjugate Pairs:
Brønsted-Lowry Acid: A proton () donor.
Brønsted-Lowry Base: A proton () acceptor.
Conjugate Acid-Base Pair: Two molecules/ions differing by a single proton ().
Acid minus Conjugate Base.
Base plus Conjugate Acid.
Amphoteric / Amphiprotic: A substance capable of acting as either an acid or a base depending on conditions (e.g., ).
Acid and Base Strengths:
Strong Acid: Dissociates completely () in water (e.g., ).
Weak Acid: Ionizes only slightly in water; dynamic equilibrium established between molecules and ions.
Diprotic Acid: Weak acid containing two dissociable protons (e.g., ).
Strong Base: Dissociates completely into metal cations and ions.
Weak Base: Poor proton acceptor, producing minimal in solution (e.g., ).
Inverse Strength Relationship: The stronger an acid, the weaker its conjugate base.

Reversible Reactions and Dynamic Equilibrium:
Reversible Reaction: Products can react to reform starting reactants.
Dynamic Equilibrium: Rates of forward and reverse reactions are equal.
Forward and reverse reactions continue occurring.
Concentrations of reactants and products remain constant over time.
Both reactants and products are simultaneously present.
Reaction example:
Le Châtelier's Principle:
If a stress is applied to a system at equilibrium, the system alters its equilibrium position to relieve that stress.
Concentration Changes:
Add reactant: shifts equilibrium Right (towards products).
Add product: shifts equilibrium Left (towards reactants).
Remove reactant: shifts equilibrium Left (towards reactants).
Remove product: shifts equilibrium Right (towards products).
Water Dissociation, , and the pH Scale
Autoionization of Water and Ion Product Constant ():
Water undergoes self-ionization:
Ion Product Constant of Water () at :
In pure water (Neutral Solution):
Acidic Solution: and
Basic Solution: and
The pH Scale and Equations:
pH Definition:
Calculating from pH:
pH Range:
: Acidic
: Neutral
: Basic
pH Values of Common Liquids:
:
Lemon juice, gastric juice:
Wine:
Black coffee:
Milk:
Blood:
Egg white:
Household bleach:
Household ammonia:
Oven cleaner, lye:
:

Sample pH Calculations:
Problem 1: Find pH of (strong acid, completely dissociated):
Problem 2: Find pH of (strong base, completely dissociated):
Problem 3: Find in lake water sample with :