Functions, Relations, Domain and Range, and Arithmetic Sequences Study Notes

Core Concepts of Relations and Functions

Fundamental Definitions

  • Relation: Any set of inputs that has an output.
  • Function: A specific type of relation such that every single input has exactly 1 output.
  • Domain: The set of all input values (xx-values); represents the independent variable in contextual word problems.
  • Range: The set of all output values (yy-values); represents the dependent variable in contextual word problems.

Representations of relations, mapping diagrams, tables, graphs, and vertical line test examples

Four Representations of a Relation

A mathematical relation can be expressed in four primary representations:

  1. Set of Ordered Pairs: Written as a set of coordinate points, e.g., {(1,1),(0,2),(3,−2)}\{(1, 1), (0, 2), (3, -2)\}.
  2. Table: A two-column table organizing xx-values and corresponding yy-values.
  3. Mapping Diagram: Two side-by-side ovals representing the domain (XX) and range (YY), with arrows connecting inputs to their outputs.
  4. Graph: Plotted points or curves on a Cartesian coordinate plane.
Worked Example: Multi-Representation

For the relation {(4,3),(−2,−1),(2,−4),(0,−4)}\{(4, 3), (-2, -1), (2, -4), (0, -4)\}:

  • Table Representation (organized with inputs ordered from least to greatest):
    • x=−2x = -2, y=−1y = -1
    • x=0x = 0, y=−4y = -4
    • x=2x = 2, y=−4y = -4
    • x=4x = 4, y=3y = 3
  • Mapping Diagram: Domain oval contains {−2,0,2,4}\{-2, 0, 2, 4\}; Range oval contains {−4,−1,3}\{-4, -1, 3\}. Arrows map −2→−1-2 \rightarrow -1, 0→−40 \rightarrow -4, 2→−42 \rightarrow -4, and 4→34 \rightarrow 3. Values in the range oval do not repeat.
  • Domain in Set-Builder Notation: {x∤x=−2,0,2,4}\{x \nmid x = -2, 0, 2, 4\} (where the vertical bar ∤\nmid reads as "such that").
  • Range in Set-Builder Notation: {y∤y=−4,−1,3}\{y \nmid y = -4, -1, 3\} (listed in order from lowest to highest value).

Determining Function Validity

To determine whether a given relation is a function, apply one of the following criteria:

  1. Input Rule: Each input value must map to exactly 1 output value. An input cannot repeat with a different output.
  2. Vertical Line Test (VLT): On a graph, no vertical line can pass through more than one point at any place on the graph.
Graphical and Structural Examples
  • Upward Parabola: PASSES VLT →\rightarrow Function.
  • Sideways Parabola (Opening Right): FAILS VLT →\rightarrow Not a Function.
  • Step Function with Aligned Boundary Points: If a vertical line intersects an open circle (◯\bigcirc, meaning not included) and a closed circle (∙\bullet, meaning included) at the same xx-value, it is still considered a Function because it intersects exactly one defined point.
  • Mapping Diagram with Repeating Inputs: A mapping where input 00 points to both output 00 and output 88 is Not a Function because a single input pairs with two different outputs.
  • Table with Unique Inputs: A table with domain {−7,−4,2,5}\{-7, -4, 2, 5\} mapping to range {−12,−9,3,0}\{-12, -9, 3, 0\} is a Function because each xx-value maps to exactly one yy-value.
  • Circle Graph: FAILS VLT →\rightarrow Not a Function.

Function evaluation practice, mapping diagrams, tables, and vertical line test examples

Function Notation and Evaluation

Function Notation vs. X-Y Notation

  • Function Notation: Represented as f(x)f(x), pronounced as "F of X".
  • Definition: f(x)f(x) is an alternate way of expressing the dependent variable yy within an equation.
Function NotationX-Y Notation
f(x)=−53x+4f(x) = -\frac{5}{3}x + 4y=−53x+4y = -\frac{5}{3}x + 4
f(x)=−2x−5f(x) = -2x - 5y=−2x−5y = -2x - 5

Evaluating Functions

Evaluating a function involves substituting (plugging in) a given input value for xx and simplifying the arithmetic expression to determine the output f(x)f(x).

Worked Evaluation Problems

Given the function f(x)=3x−4f(x) = 3x - 4:

  1. Find f(4)f(4):    f(4)=3(4)−4f(4) = 3(4) - 4f(4)=12−4f(4) = 12 - 4f(4)=8f(4) = 8(Input x=4x = 4 yields output y=8y = 8)

  2. Find f(−5)f(-5):    f(−5)=3(−5)−4f(-5) = 3(-5) - 4f(−5)=−15−4f(-5) = -15 - 4f(−5)=−19f(-5) = -19(Input x=−5x = -5 yields output y=−19y = -19)

Contextual Domain and Range

Contextual domain and range problems including field trip costs and area functions

Real-World Context Constraints

When evaluating domain and range in real-world scenarios, practical constraints dictate which numbers are valid:

Example 1: Field Trip Costs
  • Function: C(x)=30xC(x) = 30x, where xx represents the number of students (input) and C(x)C(x) represents total cost in dollars (output).
  • Evaluating Inputs from candidate set {22,4.5,13,132,45}\{22, 4.5, 13, \frac{13}{2}, 45\}:
    • Possible Inputs: 13,22,4513, 22, 45
    • Justification: Student counts must be non-negative whole numbers; fractional or decimal people (e.g., 4.54.5 or 132\frac{13}{2}) cannot exist.
  • Evaluating Outputs from candidate set {20,30,50,90,100}\{20, 30, 50, 90, 100\}:
    • Possible Outputs: 30,9030, 90
    • Justification: Since tickets cost 3030 dollars each, total output costs must be positive multiples of 3030.
Example 2: Sorting Rational Numbers by Context

Given the set of numbers: {−3,9,−12,0.001,15,254,0,−18,0.8,6.8}\{-3, 9, -\frac{1}{2}, 0.001, 15, \frac{25}{4}, 0, -18, 0.8, 6.8\}

  1. Area of a Square: A(s)=s2A(s) = s^2, where ss is side length in cm.
    • Valid Values: 9,0.001,15,254,0.8,6.89, 0.001, 15, \frac{25}{4}, 0.8, 6.8
    • Justification: Side length and total area cannot be negative, but positive integers, fractions, and decimals are fully valid.
  2. Tennis Camp Revenue: R(n)=40nR(n) = 40n, charging 4040 dollars per student, requiring at least 55 students and maximum 1616 campers per day.
    • Valid Student Inputs: 9,159, 15
    • Justification: Inputs must be whole integers between 55 and 1616 inclusive.
  3. Celsius to Kelvin Temperature: K(c)=c+273.15K(c) = c + 273.15
    • Valid Values: All values in the set (−3,9,−12,0.001,15,254,0,−18,0.8,6.8-3, 9, -\frac{1}{2}, 0.001, 15, \frac{25}{4}, 0, -18, 0.8, 6.8).
    • Justification: Temperatures can be positive, negative, zero, fractional, or decimal.
Example 3: Summer Camp Domain and Range Analysis
  • Unrestricted Summer Camp Revenue: R(n)=40nR(n) = 40n, where nn is camper count.
    • Domain: {x∣x=0,1,2,3,… }\{x \mid x = 0, 1, 2, 3, \dots\}
    • Range: {y∣y=0,40,80,120,… }\{y \mid y = 0, 40, 80, 120, \dots\}
  • Restricted Summer Camp Revenue (Min 5, Max 16 campers):
    • Restricted Domain: {x∣x=5,6,7,…,15,16}\{x \mid x = 5, 6, 7, \dots, 15, 16\}
    • Restricted Range: {y∣y=200,240,280,…,600,640}\{y \mid y = 200, 240, 280, \dots, 600, 640\}
Example 4: Temperature vs. Attendance Context

For outdoor soccer game attendance modeled by P(x)=2x+24P(x) = 2x + 24, where xx is rounded Fahrenheit temperature and P(x)P(x) is total spectator count:

  • Value −12-12: Belongs in the Domain (xx), because outside temperatures can drop to −12∘F-12^\circ\text{F}, whereas attendance cannot be negative.
  • Value 214214: Belongs in the Range (yy), because spectator attendance can reach 214214 people, whereas outdoor temperatures do not reach 214∘F214^\circ\text{F}.

Continuous vs. Discrete Functions

Comparison of continuous continuous line graph vs discrete scatter plot graph for revenue

Definitions and Distinctions

  • Continuous Function: A function whose graph forms an uninterrupted line or curve, representing a continuous range of real values over an interval.
    • Example: The time it takes to run a marathon.
  • Discrete Function: A function whose graph consists of distinct, separate points, representing countable individual items.
    • Example: The number of people showing up to a concert.

Graphical Selection

When graphing revenue R(n)=40nR(n) = 40n based on the number of student campers:

  • A Discrete Graph (scattered individual data points) correctly models the function.
  • A Continuous Graph (connected solid line) is incorrect because camp enrollment can only be measured in whole human counts, making intermediate fractional values impossible.

Arithmetic Sequences as Discrete Linear Functions

Core Sequence Concepts

  • Sequence: An ordered list of numbers that follows a defined mathematical pattern.
  • Term: Each individual number within a sequence.
  • Arithmetic Sequence: A sequence in which the difference between consecutive terms remains constant.
  • Common Difference (dd): The constant difference between any two adjacent terms in an arithmetic sequence.
    • Formula: d=2nd term−1st termd = \text{2nd term} - \text{1st term}
    • Example: For sequence 3,9,15,213, 9, 15, 21, common difference d=9−3=6d = 9 - 3 = 6.

Sequences as Functions

An arithmetic sequence functions as a discrete linear function where:

  • Domain (xx): Restricted to the set of natural numbers (1,2,3,…1, 2, 3, \dots), representing term position.
  • Range (yy): The actual values of the sequence terms.
  • Subscript Notation: Terms are identified as ana_n, where nn indicates the term position.
    • Example: a2=4a_2 = 4 states that the 2nd term of the sequence is 44.

Worked Examples

Pattern Warm-Up Problem
  • Stage 1: 11 dog
  • Stage 2: 33 dogs
  • Stage 3: 55 dogs
  • Stage 4: 77 dogs
  • Pattern: Increases by +2+2 dogs per stage.
  • Calculating Stage 15:   a15=2(15)−1=29 dogsa_{15} = 2(15) - 1 = 29\text{ dogs}
Sequence Parameter Analysis

Given the sequence: −4,0,4,8,12,16,…-4, 0, 4, 8, 12, 16, \dots

  • Common Difference (dd): 0−(−4)=40 - (-4) = 4
  • First Term (a1a_1): −4-4
  • Fifth Term (a5a_5): 1212