Biomechanical Analysis of Human Motion: Linear and Angular Kinetics
Foundations of Biomechanical Kinetics
Kinetics is the branch of classical mechanics and biomechanics that analyzes the forces and moments that cause or result from the motion of bodies. While kinematics describes motion purely in terms of displacement, velocity, and acceleration without regard to the underlying causes, kinetics establishes the causal relationship between these kinematic patterns and the physical loads that produce them.
Biomechanical kinetics operates across linear and angular domains. A force is a vector quantity possessing magnitude, direction, line of action, and a point of application, measured in Newtons (). An angular force, or moment of force (torque), describes the tendency of a force to rotate an object about an axis and is measured in Newton-meters ().
Newton's Laws of Motion in Biomechanics
Classical Newtonian mechanics provides the theoretical framework for analyzing human movement. Isaac Newton formulated three fundamental laws governing translational motion, each having an exact rotational analogue in biomechanics.
Newton's First Law (Law of Inertia)
Original wording: "Every object perseveres in its state of rest, or of uniform motion in a right line, unless it is compelled to change that state by forces impressed thereon."
In human movement, an anatomical segment or whole body maintains constant velocity (which includes remaining at rest) unless acted upon by an external net unbalanced force. Inertia represents a body's resistance to changes in its state of motion.
- In translational motion, inertia is quantified solely by mass (, measured in ).
- In rotational motion, resistance to change in angular state is governed by the moment of inertia (, measured in ), which depends on both the segment mass and the spatial distribution of that mass relative to the axis of rotation ().
Newton's Second Law (Law of Acceleration)
Original wording: "The change of motion of an object is proportional to the force impressed; and is made in the direction of the straight line in which the force is impressed."
Mathematically, the net applied force equals the time rate of change of linear momentum ():
Assuming mass remains constant over time:
For rotational motion, the net applied moment () equals the time rate of change of angular momentum ():
where represents angular acceleration () and represents angular velocity ().
Newton's Third Law (Law of Reaction)
Original wording: "To every action, there is always opposed an equal reaction; or, the mutual actions of two bodies upon each other are always equal, and directed to contrary parts."
Whenever body A exerts a force on body B, body B simultaneously exerts a force equal in magnitude and opposite in direction on body A:
In terrestrial biomechanics, whenever an athlete pushes into the ground, the ground exerts an identical force back onto the athlete's foot. This reaction force is called the Ground Reaction Force (GRF).
Free Body Diagrams (FBDs)
A Free Body Diagram is a graphical and analytical representation used to isolate a mechanical system or anatomical segment from its surroundings to resolve all acting forces and moments.

In multi-segment human kinetic models, each limb segment (such as the shank, thigh, or foot) is modeled as a rigid body with known mass (), center of mass (CoM) location, and mass moment of inertia (). For a general two-dimensional planar segment:
- The proximal joint transmits reaction forces (, ) and a net internal muscle moment ().
- The distal joint transmits reaction forces (, ) and a net internal muscle moment ().
- Gravitational attraction acts downward at the center of mass with magnitude .
- Segment linear accelerations (, , resultant ) and angular acceleration () describe the dynamic state.
- Distances from the proximal joint to the center of mass () and from the center of mass to the distal joint (), along with segment orientation angle (), define moment arms for angular momentum balance.
The equations of dynamic equilibrium for a single isolated segment in a plane are:
Mechanical Impulse and Momentum
The Impulse-Momentum Relationship
Integrating Newton's Second Law over a finite time interval from to yields the impulse-momentum theorem:
Impulse (, measured in ) represents the mechanical effect of a force acting over a duration of time and corresponds directly to the definite integral, or area under the curve, of a force-time plot.

For a constant desired change in momentum (), impulse remains constant. Consequently, force and time share an inverse relationship:
- Extending the collision or contact duration () decreases the average impact force ().
- Compressing the collision duration () drives the peak and average force up ().
Force-Time Profiles and Impulse Shapes
Identical impulse values can be generated through radically different force profiles:
- High-magnitude, short-duration profile: A steep spike with high peak force and small . This configuration is suited for sprint starts, explosive jumps, and Olympic weightlifting where rapid velocity changes are mandatory.
- Low-magnitude, long-duration profile: A flattened rectangular or sustained wave with lower peak force distributed over a broader . This profile preserves joint structures during sustained activities like marathon running.
Peak Force vs. Impulse in Injury Mechanics
Peak force and impulse govern distinct injury mechanisms:
- Acute injuries (e.g., bone fractures, ligament ruptures) typically result from excessive peak force exceeding the ultimate mechanical failure threshold of biological tissue. For example, gymnastics landing impacts can generate peak ground reaction forces reaching up to .
- Chronic or overuse injuries (e.g., stress fractures, tendinopathies) often correlate with cumulative impulse—the repetitive loading area integrated over thousands of gait cycles—even when instantaneous peak forces remain well below tissue failure thresholds.

Different human activities display distinctive vertical ground reaction force profiles across time:
- Running (solid curve) produces a rapid stance phase under , showing a sharp initial impact transient followed by an active propulsive peak exceeding .
- Aerobic stepping (dotted curve) shows a delayed, broadened peak loading response.
- Walking gait (dashed curve) lasts approximately and displays a characteristic bimodal profile with peaks around .
Case Study: Musculoskeletal Recruitment in Sit-to-Stand Tasks
A study by Samuel H.L. Smith, Peter Reilly, and Anthony M.J. Bull (2020), published in the Journal of Biomechanics (Vol. 98, p. 109451), titled "A musculoskeletal modelling approach to explain sit-to-stand difficulties in older people due to changes in muscle recruitment and movement strategies," evaluated biomechanical adaptations during chair rise.
Experimental findings revealed:
- No significant differences in overall movement duration between young and elderly cohorts.
- No significant differences in reliance on arm rests.
- No significant differences in vertical or horizontal ground reaction forces.
- No significant differences in trunk flexion angles.
- Elderly individuals placed their feet significantly closer to the chair base prior to liftoff.
- Average baseline physiological differences in maximal muscle strength were accounted for within the musculoskeletal model using literature-validated parameters.

Despite identical external kinematics and ground forces, the internal kinetic strategies differed dramatically across age groups:
Extensor Impulse Distribution Across Age Groups
| Age Group | Hip Extensors Impulse () | Knee Extensors Impulse () |
|---|---|---|
| Young | ||
| Elderly |
Note: Superscript denotes a statistically significant difference compared to the young group ().
Analysis of the muscle summation data showed:
- Knee extensor peak force in young adults exceeded (with upper ranges near ) at seat liftoff, whereas elderly individuals generated only approximately ().
- Hip extensor peak force was substantially higher in the elderly cohort () compared to the young cohort (, ).
Older adults reorganize their motor control strategy, shifting mechanical impulse demands away from weakened knee extensors (quadriceps) toward the hip extensor musculature (gluteals and hamstrings) to successfully complete the sit-to-stand transition.
External Forces in Human Movement
External forces originate outside the human body and act upon its external boundaries. In musculoskeletal modeling, these external forces serve as primary boundary conditions driving inverse dynamics computations.
Gravitational Force (Weight) and Sensitivity Analysis
Gravity exerts a downward force proportional to body or segment mass:
where on Earth.
To determine the sensitivity of joint reaction forces to segmental weight errors, consider a static, non-accelerating planar model of a foot resting flat on the ground:
- Total body mass:
- Body height:
- Foot mass:
- Ground reaction force acting on one foot: , acting upward at of foot length ().
Under static equilibrium in the vertical direction ():
Comparing two segmented mass estimates for :
- Condition A ():
- Condition B (, an drop in estimated foot mass):
Relative discrepancy:
Because the ground reaction force () dominates the mechanical equilibrium, errors in segment mass during weight-bearing stance have negligible impact on ankle joint reaction force calculations.
Non-Weight-Bearing Scenario (Segment Floating in Mid-Air)
When the foot is lifted off the ground ():
- Condition A ():
- Condition B ():
Relative discrepancy:
In the absence of external contact forces (e.g., swing phase of gait, kicking, ballistic limb movements), inertial properties and gravitational segment weight become the primary determinants of internal joint reaction forces, making accurate anthropometric parameter estimation critical.
Microgravity and Spaceflight Biomechanics
Mass is an intrinsic measure of matter, whereas weight depends on local gravitational acceleration:
- A mass weighs approximately () on Earth ().
- The same mass weighs approximately () on Mars ().
- In low Earth orbit (e.g., International Space Station), effective gravitational acceleration relative to the hull is approximately zero ().
Conventional fitness machines that depend on gravity-based mass resistance—such as leg press sleds, selectorized weight stacks, and free barbells—provide zero resistive mechanical load in microgravity. To counter this, resistance must be generated artificially using elastic bands, pneumatic/vacuum cylinders, or flywheel inertia systems.
According to data from the European Space Agency (ESA) and NASA:
- Astronauts lose up to of their muscle mass during long-duration space missions without adequate mechanical countermeasures.
- On shorter missions, muscle atrophy rates average between and .
Ground Reaction Forces (GRF) and Center of Pressure
Ground Reaction Force represents the instantaneous reaction vector exerted by the ground surface upon the body. It is measured using piezoelectric or strain-gauge force platforms embedded flush with the floor. The force vector originates at the Center of Pressure (CoP), which is the spatial centroid of all instantaneous contact pressures exerted over the plantar surface of the foot.
In normal human walking gait, the vertical component of the GRF follows a characteristic bimodal "M-shape":
- First Peak (Impact and Weight Acceptance): Occurs at approximately of the gait cycle as the lower limb absorbs body weight, reaching .
- Mid-Stance Trough: Occurs at approximately of the stance phase as the body's center of mass vaults upward over the supporting leg like an inverted pendulum, reducing vertical force to .
- Second Peak (Terminal Stance / Push-off): Occurs at approximately of stance as the triceps surae complex actively plantarflexes to propel the body forward, generating .
The anteroposterior (horizontal) ground reaction force profile shows an initial negative braking phase (decelerating forward motion) followed by a positive propulsive phase (accelerating forward motion), each reaching approximately .
Running Biomechanics: Rearfoot vs. Forefoot Striking
Running kinetics differ significantly based on the foot strike pattern adopted at initial ground contact.

In Rearfoot Striking (RFS / Heel Strike):
- Initial contact occurs on the posterior-lateral border of the calcaneus.
- A sharp, transient impact peak appears within the first of contact, reaching . This transient produces a high vertical loading rate () that transmits a rapid stress wave through the calcaneus, tibia, and knee joint.
- This is followed by an active peak of approximately as the center of mass moves over the midfoot.

In Forefoot Striking (FFS / Toe Strike):
- Initial contact occurs across the metatarsal heads with the ankle in plantarflexion.
- The passive impact transient is completely absent because eccentric contraction of the gastrocnemius-soleus complex and elastic compliance of the Achilles tendon dampen the collision.
- The force curve rises smoothly to a single active peak of approximately .
While forefoot striking eliminates the high-frequency impact transient at the knee and hip, it substantially increases mechanical loading and cumulative impulse demands on the Achilles tendon, plantar fascia, and triceps surae.
Pathological Gait: Ground Reaction Forces and Power in Stroke Patients
A clinical study by HyeongMin Jeon, Eun-Hye Chung, Se-Young Bak, Heegoo Kim, Seyoung Shin, Hongseok Baek, and MinYoung Kim examined hemiparetic stroke patients during level walking, categorized by Functional Ambulation Category (FAC 4 vs. FAC 5) relative to healthy controls.

Key kinetic findings from hemiparetic gait analysis:
- In normal healthy controls, the superior GRF displays the standard bimodal profile, exceeding at loading response and push-off, with a distinct mid-stance unloading trough ().
- In the stroke-affected limb (FAC 4 and FAC 5), the bimodal characteristic is lost. The curve flattens into a single delayed peak plateauing between , reflecting impaired dynamic weight transfer and loss of active ankle push-off.
- The unaffected limb compensates by prolonging stance duration and bearing disproportionate vertical loading.

Sagittal joint power (, measured in ) further illustrates these motor deficits:
- Ankle joint power: Healthy individuals generate a massive positive propulsive power burst ( peak) reaching at stance phase via rapid plantarflexor push-off. In the stroke-affected limb (FAC 4), ankle generation drops below .
- Knee joint power: Shows abnormal eccentric absorption and disrupted power transfer in late stance.
- Hip joint power: The stroke-affected limb shows reduced hip flexion pull-off generation () in late stance, relying on compensatory circumduction or pelvic hiking to initiate swing.
Implementation of External Forces in Computational Models
When applying external loads to computational musculoskeletal models, every external force vector requires:
- A specific rigid anatomical body segment to which it is attached.
- A clear coordinate frame of reference (Global Laboratory Frame vs. Local Segment Anatomical Frame).
- Spatial tracking of its instantaneous point of application.
- Precise temporal synchronization: Force platform data sampled at high frequencies (typically ) must be temporally aligned and downsampled or interpolated to match kinematic motion capture sampling rates (typically ).
Dynamic models handle three primary external force time-series profiles:
- Constant forces: Invariant magnitude across time (e.g., gravity acting on an unchanging carried mass).
- Ramp forces: Linearly or continuously varying loads (e.g., a fluid container progressively filling with water).
- Pulse / Impact forces: High-frequency, transient step functions acting over milliseconds (e.g., ball strikes, collisions, archery bowstring release).
Internal Forces and Musculoskeletal Mechanics
Internal forces are generated within the human body to maintain structural integrity, counteract external environmental loads, and drive joint articulation. These include active muscle tensile forces, passive ligament tensions, viscoelastic tendon forces, and joint contact forces between articulating cartilaginous surfaces.
Muscle Forces and Contraction Modes
Skeletal muscle is the sole active force generator in the musculoskeletal system. Muscles generate tensile force along their lines of action through the actin-myosin cross-bridge cycle. Skeletal muscles can only pull; they can never push ().
Muscles operate across three physiological contraction regimes:
- Concentric contraction: Muscle develops tension while shortening (; mechanical work is done on the environment).
- Eccentric contraction: Muscle develops tension while being forcibly lengthened by an external torque (; mechanical energy is absorbed and dissipated or stored elastically).
- Isometric contraction: Muscle develops tension while remaining at a constant macroscopic length (; mechanical work is zero, but metabolic energy is consumed).
Net Joint Moments vs. Individual Muscle Forces
Because non-invasive in vivo measurement of individual muscle forces is clinically impossible, classical biomechanical analyses rely on inverse dynamics to calculate net joint moments ().
The net joint moment does not represent the force of any single muscle. Instead, it reflects the net rotational effect produced by all active agonist and antagonist muscles, passive connective tissues, and joint capsules spanning the anatomical axis of rotation:
where represents the perpendicular moment arm of muscle .
Because both agonists and antagonists contract simultaneously (co-contraction), inverse dynamics cannot distinguish between high co-contraction with moderate net moment and low co-contraction with the same net moment. Resolving individual muscle forces requires computational musculoskeletal modeling using static optimization or forward dynamic optimal control to solve this muscular redundancy problem (having more muscles than degrees of freedom).
Quadriceps Forces and Patellofemoral Joint Stability
The extensor mechanism of the knee illustrates internal force distribution. The quadriceps muscle group consists of four individual heads with distinct proximal origins and lines of action:
- Vastus Lateralis ()
- Rectus Femoris ()
- Vastus Intermedius ()
- Vastus Medialis ()
These four muscle forces merge into the common quadriceps tendon, inserting into the superior pole of the patella.

The patella functions as an anatomical pulley, displacing the line of pull away from the knee joint's center of rotation to increase the extensor mechanism's moment arm. Resolving the forces acting on the patella demonstrates how active muscle forces create stabilizing joint contact pressures:
- The quadriceps force () pulls superiorly and posteriorly along the anterior femoral shaft.
- The patellar tendon force () pulls inferiorly and slightly posteriorly toward the tibial tuberosity.
- The vector sum of these two tensile forces drives the patella into the femoral trochlear groove, creating a compressive reaction force called the patellofemoral contact force ().
As knee flexion increases during loaded squats or lunges, the angle between the quadriceps tendon and patellar tendon sharpens, driving patellofemoral joint compression up to multiple times body weight even if muscle force remains constant.
Vector Resolution and Joint Angle Dependence
As joints rotate, the angle of insertion of muscle tendons onto bone changes continuously, shifting the muscle's mechanical advantage and altering internal joint loading.

A muscle force vector () acting on a bony lever at an insertion angle () resolves into two orthogonal components:
- Rotary Component (, perpendicular to the longitudinal axis of the bone): Generates the angular moment that rotates the joint lever arm.
- Longitudinal Component (, parallel to the longitudinal axis of the bone): Pulls directly along the bone toward the joint axis, producing joint compression (stabilizing force) or, if directed away, joint distraction (dislocating force).
Analytical Comparison across Flexion Angles
Consider an elbow joint where the biceps brachii generates force onto the radius at two different joint angles:
- At :
- At :
As the elbow extends toward , the rotary component drops from to , reducing its ability to generate angular torque. Conversely, the longitudinal stabilizing component rises from to , increasing articular surface compression across the humeroulnar joint.
Moment Arms and Two-Joint Muscles

The internal moment generated about any joint is defined by:
where is the perpendicular distance from the muscle-tendon line of action to the instantaneous joint center of rotation.
Internal torque is governed by two variable parameters:
- Physiological muscle force (), governed by the active length-tension and force-velocity relationships.
- Moment arm length (), which changes dynamically as joint articulation alters the geometry between bony insertion sites and joint centers.
Two-joint (biarticular) muscles, such as the rectus femoris, gastrocnemius, and hamstrings, span two consecutive joints. A single tensile contraction force in a biarticular muscle produces simultaneous moments across both joints, with the magnitude of each moment determined by its local perpendicular moment arm ( and ).
Joint Reaction Forces vs. Joint Contact Forces
A critical distinction in biomechanics exists between Joint Reaction Forces (JRF) and Joint Contact Forces (JCF):
- Joint Reaction Force (JRF): The net mechanical force vector calculated at an idealized joint cut via classical inverse dynamics. It represents the net load required to balance segment accelerations, external contact loads, and gravity across a joint boundary.
- Joint Contact Force (JCF): The actual physical contact pressure experienced by the articular cartilage and subchondral bone within the joint space. Joint contact force equals the vector sum of the joint reaction force plus all active tensile forces exerted by muscles and ligaments crossing the joint:
Because skeletal muscles insert close to joint rotation axes, they operate at a significant mechanical disadvantage (short moment arms, often ). Consequently, muscles must generate forces several times greater than external loads to balance external joint moments. These massive muscle forces compress articulating surfaces against each other, causing true in vivo Joint Contact Forces to reach during walking, climbing, and running—far exceeding the net Joint Reaction Force calculated from external loads alone.
Clinical Implications: Knee Contact Forces and Osteoarthritis

A pilot study by Ziyun Ding, Hannah L. Jarvis, Alexander N. Bennett, Richard Baker, and Anthony M.J. Bull, titled "Higher knee contact forces might underlie increased osteoarthritis rates in high functioning amputees: A pilot study," highlighted the clinical consequences of altered internal contact forces.
In lower-limb amputees, asymmetric gait dynamics shift mechanical loading onto the intact contralateral limb. Muscle co-contraction and altered gait kinematics increase medial compartment tibiofemoral contact forces (), accelerating articular cartilage breakdown, joint space narrowing, and the onset of knee osteoarthritis.
Articular bone requires moderate physiological compression to preserve mineral density and cartilage cellular health. However, chronic overloading or abnormal focal stress concentrations exceed the reparative capacity of chondrocytes, driving cartilage fibrillation and structural degeneration.
Mechanical Role of Ligaments and Tendons
Connective tissues provide specialized passive mechanical support:
- Ligaments connect bone to bone across articulating joints. They cannot actively contract. Instead, they act as passive mechanical restraints that provide joint stability when external or muscle forces displace the joint near its anatomical limits. In musculoskeletal models, ligaments are typically modeled as non-linear elastic springs with specified slack lengths, high tensile stiffness, and ultimate failure strain thresholds.
- Tendons connect muscle bodies to bone. Rather than acting as rigid cables, tendons function as compliant viscoelastic springs. They transmit active muscle forces, alter muscle fascicle operating lengths and velocities, and store and release elastic strain energy during cyclic movements (the stretch-shortening cycle), significantly lowering the metabolic cost of locomotion.
The Computational Biomechanics Analysis Pipeline
Kinetic modeling forms an integrated computational architecture that transforms raw laboratory motion capture recordings into internal musculoskeletal force estimates.
+---------------------------------------+
| Raw Experimental Data |
| - 3D Marker Trajectories (Cameras) |
| - Ground Reaction Forces (Force Plate)|
+-------------------+-------------------+
|
v
+---------------------------------------+
| Inverse Kinematics Model |
| - Anatomical Coordinate Systems |
| - Matrix Transformations & Joint Angles|
| - Segment Linear/Angular Accelerations|
+-------------------+-------------------+
|
v
+---------------------------------------+
| Inverse Dynamics Model |
| - Segment Inertial Properties (FBDs) |
| - Net Joint Moments (M_net) |
| - Net Joint Reaction Forces (JRF) |
+-------------------+-------------------+
|
v
+---------------------------------------+
| Musculoskeletal Optimization Models |
| - Static Optimization / Muscle Routing|
| - Individual Muscle Forces (F_muscle) |
| - Joint Contact Forces (JCF) |
+---------------------------------------+

- Optical Motion Capture: Retroreflective markers placed on anatomical landmarks track 3D positions over time within a calibrated Global Coordinate Frame.
- Inverse Kinematics: Marker trajectories map onto an underlying articulated skeletal model to calculate generalized joint coordinates, segment orientations, and joint angular accelerations via matrix transformations.
- Force Plate Analysis: Ground reaction force vectors and Center of Pressure coordinates are transformed into the global frame and assigned to the interacting foot segment.
- Inverse Dynamics: Newton-Euler equations of motion solve for net joint reaction forces () and net joint moments () sequentially from distal segments (foot) to proximal segments (pelvis/torso).
- Musculoskeletal Static Optimization: Resolves the muscular redundancy problem by minimizing a physiological cost function (such as the sum of squared muscle activations, ) to partition net joint moments into individual muscle tensile forces ().
- Joint Contact Force Computation: Combines net joint reaction forces with individual muscle and ligament tensile vectors to determine compressive and shear contact stresses across articulating cartilage surfaces.