Math 20-1 Trigonometry Vocabulary
Foundations of Right-Angle Trigonometry and Prerequisite Tools
Primary Trigonometric Ratios (SOH CAH TOA):
- Defined exclusively for right-angled triangles with reference to an acute angle :
- Sine ratio:
- Cosine ratio:
- Tangent ratio:
The Pythagorean Theorem:
- Establishes the fundamental geometric relation among the three sides of a right triangle:
- Solving for the hypotenuse:
- Solving for a leg: or
Review Worked Examples — Calculating Unknown Sides and Angles:
- Solving for side with the Pythagorean Theorem:
- Leg , leg , hypotenuse :
- Leg , hypotenuse , missing leg :
- Solving for side using Primary Trigonometric Ratios:
- Hypotenuse , angle , side adjacent to :
- Side opposite is , hypotenuse is :
- Solving for unknown angle using Inverse Ratios:
- Triangle with adjacent leg and opposite leg relative to angle :
- Triangle with hypotenuse and opposite leg relative to angle :
Angles in Standard Position and Reference Angles
- Standard Position Characteristics:
- An angle on the Cartesian plane is in standard position if and only if:
- Its vertex is fixed precisely at the origin .
- Its initial arm lies along the positive -axis.
- The angle rotates counterclockwise (CCW) for positive measures and clockwise for negative measures.
- Its terminal arm terminates in one of the four quadrants or along an axis.

Cartesian Quadrant Boundaries ():
- Quadrant I:
- Quadrant II:
- Quadrant III:
- Quadrant IV:
- Quadrantal boundaries occur at , , , , and .
Reference Angle ():
- Verbatim Definition: The acute angle formed between the terminal arm of an angle in standard position and the -axis.
- Properties:
- Always positive.
- Always acute ( for non-quadrantal angles).
- Always measured relative to the horizontal -axis (never to the -axis).


Formulas Relating Standard Angle and Reference Angle :
- Quadrant I:
- Quadrant II:
- Quadrant III:
- Quadrant IV:
Worked Examples — Determining Quadrant and Reference Angle:
- terminates in Quadrant II:
- terminates in Quadrant III:
- terminates in Quadrant IV:
- terminates in Quadrant III:
- terminates in Quadrant I:
- terminates in Quadrant IV:
- terminates in Quadrant I:
- terminates in Quadrant II:
- terminates in Quadrant III:
- terminates in Quadrant IV:
- Reference angles for given standard position angles:
Reconstructing Angles in Standard Position from Reference Angles:
- Given in Quadrant III:
- Given in Quadrant IV:
- Given in Quadrant II:
- Given in Quadrant I:
- Given in Quadrant II:
- Given in Quadrant III:
- Given in Quadrant IV:
Symmetric Angle Families Across Four Quadrants:
- family: (QI), (QII), (QIII), (QIV)
- family: (QI), (QII), (QIII), (QIV)
- family: (QI), (QII), (QIII), (QIV)
- Other Families:
- Reference angle : , ,
- Reference angle : , ,
- Reference angle : , ,
- Reference angle : , ,
Reference Angle Equivalence Checks:
- Pair : has (No)
- Pair : has , has (No)
- Pair : has ; has (Yes)
- Pair : has ; has (No)
Multiple Rotations, Coterminal Angles, and Principal Angles:
- Coterminal Angles: Angles in standard position that share the exact same terminal arm. Expressed as , where .
- Principal Angle: The angle in standard position between and coterminal with the given angle.
- Rotation Analysis:
- : . Complete rotations: . Quadrant: II. Reference angle: . Principal angle: .
- : . Complete rotations: . Quadrant: None (lies on negative -axis). Reference angle: None. Principal angle: .
- : . Complete rotations: . Quadrant: II. Reference angle: . Principal angle: .
- : . Complete rotations: in clockwise direction. Quadrant: III. Reference angle: . Principal angle: .
- Finding Coterminal Angles in Specified Intervals:
- Angle in :
- Angle in :
- Angle in :
- Large Magnitude Angles:
- : . Quadrant: I. Reference angle: .
- : . Quadrant: II. Reference angle: .
- : . Quadrant: IV. Reference angle: .
- : . Quadrant: III. Reference angle: .
Trigonometric Ratios of Any Angle and the CAST Rule
- Coordinate Definitions of Trigonometric Ratios:
- Let be any point on the terminal arm of angle in standard position at a distance from the origin .
- Distance to the origin is strictly positive ():
- The primary trigonometric ratios are defined as:

The CAST Rule (Sign Distribution by Quadrant):
- Quadrant I (): All ratios positive ().
- Quadrant II (): Sine is positive; are negative.
- Quadrant III (): Tangent is positive; are negative.
- Quadrant IV (): Cosine is positive; are negative.
- Mnemonic: "CAST" (starting in Quadrant IV and moving counterclockwise through I, II, III) or "A Smart Trig Class" (Quadrants I, II, III, IV).
Worked Examples — Exact Ratios Given a Coordinate Point:
- Point :
- Distance:
- Exact ratios:
- Reference angle:
- Standard position angle:
- Point :
- Distance:
- Exact ratios:
- Reference angle:
- Standard position angle:
- Point :
- Distance:
- Exact ratios: , ,
- Point :
- Distance:
- Exact ratios: , ,
- Point :
- Distance:
- Exact ratios: , ,
- Point :
- Distance:
- Exact ratios: , ,
- Point :
- Reference angle:
- Standard position angle:
- Point :
- Reference angle:
- Standard position angle:
- Point with :
- Coordinate calculation:
- For (QI): , , ,
- For (QII): , , ,
Worked Examples — Exact Ratios Given Another Trigonometric Ratio:
- Given in Quadrant III:
- Identification: , . Missing coordinate:
- Exact ratios:
- Angle:
- Given in Quadrant IV:
- Identification: , . Hypotenuse:
- Exact ratios:
- Angle:
- Given in Quadrant III:
- ,
- Ratios: ,
- Given in Quadrant IV:
- ,
- Ratios: ,
- Given in Quadrant II:
- ,
- Ratios: ,
- Given and :
- Sine is negative in QIII and QIV; tangent is positive in QI and QIII. Angle lies in Quadrant III.
- Ratios: ,
- Given and :
- Cosine positive in QI and QIV; tangent negative in QII and QIV. Angle lies in Quadrant IV.
- Ratios: ,
- Given and :
- Tangent negative in QII and QIV; sine positive in QI and QII. Angle lies in Quadrant II.
- Ratios: ,
Algebraic Generalizations:
- Given in Quadrant IV ():
- Here, and . Since it is in QIV, .
- Expression for :
- Given with (Quadrant IV) and :
- , , .
- Ratios: , .
- Product:
- Given with (Quadrant III) and :
- Both coordinates are negative: , , .
- Ratios: , .
- Difference:
Sign and Equivalence Evaluations:
- : Terminal arm in QII Positive
- : Terminal arm in QIII Negative
- : Terminal arm in QIV Negative
- : Terminal arm in QIV Negative
- : False. (QII), whereas (QIII).
- : False. (QII), whereas (QIV).
- : True. Both share , and sine is negative in both QIII and QIV ().
- : True. ; .
Exact Values and Special Right Triangles
- Distinction Between Exact and Approximate Values:
- An exact value is expressed using integers, rational fractions, or unrounded radical expressions (e.g., , , , \frac{1}{2}$).\n * An approximate value uses truncated or rounded floating-point decimals (e.g., 0.66670.70711.7321).\n\n* **Derivation of the 45^\circ - 45^\circ - 90^\circ Special Triangle:**\n * Construct a square with side lengths of 1\,\text{unit}. Draw the diagonal connecting opposite vertices.\n * By the Pythagorean Theorem, the hypotenuse is:\n c = \sqrt{1^2 + 1^2} = \sqrt{2}\n * The angles opposite the unit sides are equal: \frac{180^\circ - 90^\circ}{2} = 45^\circ.\n * Exact ratios for \theta = 45^\circ:\n \sin(45^\circ) = \frac{1}{\sqrt{2}} = \frac{\sqrt{2}}{2}\n \cos(45^\circ) = \frac{1}{\sqrt{2}} = \frac{\sqrt{2}}{2}\n \tan(45^\circ) = \frac{1}{1} = 1\n\n\n\n* **Derivation of the 30^\circ - 60^\circ - 90^\circ Special Triangle:**\n * Construct an equilateral triangle with side lengths of 2\,\text{units}60^\circ.\n * Bisect one vertex angle with an altitude to the opposite side, splitting the base into two segments of 1\,\text{unit}30^\circ angles.\n * By the Pythagorean Theorem, the altitude (height) is:\n h = \sqrt{2^2 - 1^2} = \sqrt{4 - 1} = \sqrt{3}\n * Exact ratios for \theta = 30^\circ:\n \sin(30^\circ) = \frac{1}{2}\n \cos(30^\circ) = \frac{\sqrt{3}}{2}\n \tan(30^\circ) = \frac{1}{\sqrt{3}} = \frac{\sqrt{3}}{3}\n * Exact ratios for \theta = 60^\circ:\n \sin(60^\circ) = \frac{\sqrt{3}}{2}\n \cos(60^\circ) = \frac{1}{2}\n \tan(60^\circ) = \frac{\sqrt{3}}{1} = \sqrt{3}\n\n\n\n* **Comprehensive Reference Angle Table:**\n\n| Function | 0^\circ30^\circ45^\circ60^\circ90^\circ |\n| :--- | :---: | :---: | :---: | :---: | :---: |\n| \sin(\theta)0\frac{1}{2}\frac{\sqrt{2}}{2}\frac{\sqrt{3}}{2}1 |\n| \cos(\theta)1\frac{\sqrt{3}}{2}\frac{\sqrt{2}}{2}\frac{1}{2}0 |\n| \tan(\theta)0\frac{\sqrt{3}}{3}1\sqrt{3} | Undefined |\n\n* **Evaluating Exact Ratios Across All Quadrants:**\n * Procedure: Determine the quadrant to assign the correct sign via CAST, find the reference angle \theta_R, and substitute the special triangle ratio.\n * *Examples:*\n * \cos(135^\circ)\cos < 0\theta_R = 45^\circ \implies -\cos(45^\circ) = -\frac{\sqrt{2}}{2}\n * \sin(330^\circ)\sin < 0\theta_R = 30^\circ \implies -\sin(30^\circ) = -\frac{1}{2}\n * \tan(240^\circ)\tan > 0\theta_R = 60^\circ \implies +\tan(60^\circ) = \sqrt{3}\n * \sin(240^\circ)\sin < 0\theta_R = 60^\circ \implies -\sin(60^\circ) = -\frac{\sqrt{3}}{2}\n * \cos(315^\circ)\cos > 0\theta_R = 45^\circ \implies +\cos(45^\circ) = \frac{\sqrt{2}}{2}\n * \tan(150^\circ)\tan < 0\theta_R = 30^\circ \implies -\tan(30^\circ) = -\frac{\sqrt{3}}{3}\n * \sin(135^\circ) = \frac{\sqrt{2}}{2}\tan(135^\circ) = -1\n * \cos(240^\circ) = -\frac{1}{2}\n * \cos(330^\circ) = \frac{\sqrt{3}}{2}\tan(330^\circ) = -\frac{\sqrt{3}}{3}\n * Periodic rotations:\n * \sin(870^\circ) = \sin(870^\circ - 2 \times 360^\circ) = \sin(150^\circ) = \sin(30^\circ) = \frac{1}{2}\n * \cos(2700^\circ) = \cos(2700^\circ - 7 \times 360^\circ) = \cos(180^\circ) = -1\n * \tan(-1575^\circ) = \tan(-1575^\circ + 5 \times 360^\circ) = \tan(225^\circ) = \tan(45^\circ) = 1\n\n* **Proportional Scaling of Special Triangles:**\n * Triangle with angle 45^\circ= 2\sqrt{2}b = 2\sqrt{2}a = 2\sqrt{2} \times \sqrt{2} = 4.\n * Triangle with angle 30^\circ= 2u = 2 \times 2 = 4v = 2\sqrt{3}.\n * Triangle with angle 60^\circ= 16y = 16 \times \frac{1}{2} = 8x = 16 \times \frac{\sqrt{3}}{2} = 8\sqrt{3}.\n * Triangle with angle 45^\circ= 3\sqrt{2}y = 3\sqrt{2}x = 3\sqrt{2} \times \sqrt{2} = 6.\n\n* **Applied Problem — Clock Hands Vertical Distance:**\n * A minute hand is 12\,\text{cm} long. Determine the vertical distance between the tip of the hand at 8:05 and at 8:25:\n * Dial layout: 12 intervals of 30^\circ each.\n * At 8:05 (minute hand on 1): Angle is 30^\circx-axis) in Quadrant I.\n \text{Vertical position } y_1 = 12 \sin(30^\circ) = 12\left(\frac{1}{2}\right) = 6\,\text{cm}\n * At 8:25 (minute hand on 5): Angle is 60^\circx300^\circ-60^\circ).\n \text{Vertical position } y_2 = 12 \sin(-60^\circ) = -12\left(\frac{\sqrt{3}}{2}\right) = -6\sqrt{3}\,\text{cm}\n * Total vertical distance: \Delta y = 6 - (-6\sqrt{3}) = 6 + 6\sqrt{3}\,\text{cm}60^\circ12\sqrt{3}\,\text{cm}.\n\n* **Solving Trigonometric Equations with Special Triangles (0^\circ \le \theta < 360^\circ):**\n * *Equation \cos(\theta) = -\frac{\sqrt{3}}{2}:*\n * \cos < 0 \implies\theta_R = 30^\circ.\n * Quadrant II: \theta = 180^\circ - 30^\circ = 150^\circ\n * Quadrant III: \theta = 180^\circ + 30^\circ = 210^\circ\n * *Equation \sin(\theta) = \frac{1}{2}:*\n * \sin > 0 \implies\theta_R = 30^\circ.\n * Solutions: \theta = 30^\circ, 150^\circ\n * *Equation \tan(\theta) = \sqrt{3}:*\n * \tan > 0 \implies\theta_R = 60^\circ.\n * Solutions: \theta = 60^\circ, 240^\circ\n * *Equation \sin(\theta) = \frac{\sqrt{3}}{2}:*\n * \sin > 0 \implies\theta_R = 60^\circ.\n * Solutions: \theta = 60^\circ, 120^\circ\n * *Equation \cos(\theta) = \frac{1}{\sqrt{2}}:*\n * \cos > 0 \implies\theta_R = 45^\circ.\n * Solutions: \theta = 45^\circ, 315^\circ\n * *Equation \tan(\theta) = 1:*\n * \tan > 0 \implies\theta_R = 45^\circ.\n * Solutions: \theta = 45^\circ, 225^\circ\n * *Equation \tan(\theta) = -1:*\n * \tan < 0 \implies\theta_R = 45^\circ.\n * Solutions: \theta = 180^\circ - 45^\circ = 135^\circ\theta = 360^\circ - 45^\circ = 315^\circ\n * *Equation \sin(\theta) = -\frac{\sqrt{3}}{2}90^\circ < \theta < 270^\circ:*\n * Restricted to Quadrant III. \theta_R = 60^\circ \implies \theta = 180^\circ + 60^\circ = 240^\circ\n * *Equation \cos(\theta) = \frac{1}{\sqrt{2}}180^\circ < \theta < 360^\circ:*\n * Restricted to Quadrant IV. \theta_R = 45^\circ \implies \theta = 360^\circ - 45^\circ = 315^\circ\n\n\n# Quadrantal Angles and General Trigonometric Equations\n\n* **Quadrantal Angles Definition:**\n * Angles in standard position whose terminal arm lies along the xy0^\circ, 90^\circ, 180^\circ, 270^\circ, 360^\circ).\n * Evaluated using the unit circle (r = 1\sin(\theta) = y\cos(\theta) = x\tan(\theta) = \frac{y}{x}.\n\n* **Geometric Behavior of Ratios on the Axes:**\n * As an acute angle approaches 90^\circy \to rx \to 0):\n * \sin(90^\circ) = \frac{y}{r} = \frac{r}{r} = 1\n * \cos(90^\circ) = \frac{x}{r} = \frac{0}{r} = 0\n * \tan(90^\circ) = \frac{y}{x} = \frac{1}{0} \implies \text{Undefined}\n\n* **Complete Values for Quadrantal Angles:**\n\n| Angle (\theta(x, y)\sin(\theta)\cos(\theta)\tan(\theta) |\n| :---: | :---: | :---: | :---: | :---: |\n| 0^\circ(1, 0)010 |\n| 90^\circ(0, 1)10 | Undefined |\n| 180^\circ(-1, 0)0-10 |\n| 270^\circ(0, -1)-10 | Undefined |\n| 360^\circ(1, 0)010 |\n\n* **Solving Quadrantal Trigonometric Equations (0^\circ \le \theta < 360^\circ):**\n * \sin(\theta) = -1 \implies \theta = 270^\circ\n * \cos(\theta) = 0 \implies \theta = 90^\circ, 270^\circ\n * \cos(\theta) = 1 \implies \theta = 0^\circ\n * \cos(\theta) = -1 \implies \theta = 180^\circ\n * \tan(\theta) = 0 \implies \theta = 0^\circ, 180^\circ\n\n* **Algorithmic Procedure for General Equations (Non-Special Ratios):**\n * **Step 1:** Use the algebraic sign (+-) of the ratio to establish the valid quadrants via the CAST rule.\n * **Step 2:** Compute the reference angle \theta_R by applying the inverse trigonometric function to the **absolute value** (positive magnitude) of the ratio. Never input the negative sign into the inverse function.\n * **Step 3:** Translate \theta_R\theta using quadrant-specific formulas.\n\n* **Worked Examples — Non-Special Equations (0^\circ \le \theta < 360^\circ to Nearest Degree):**\n * *Solve \cos(\theta) = -\frac{3}{4} = -0.75$:*
- Quadrants II and III (cosine is negative).
- Reference angle:
- Quadrant II:
- Quadrant III:
- Solve \cos(\theta) = +0.75$:*\n * Quadrants I and IV (cosine is positive).\n * Reference angle: \theta_R = 41^\circ\n * Quadrant I: \theta = 41^\circ\n * Quadrant IV: \theta = 360^\circ - 41^\circ = 319^\circ\n * *Solve \sin(\theta) = 0.7760$:
- Quadrants I and II.
- Solutions:
- Solve \cos(\theta) = -0.8090$:*\n * Quadrants II and III. \theta_R = \cos^{-1}(0.8090) \approx 36^\circ\n * Solutions: \theta = 180^\circ - 36^\circ = 144^\circ\theta = 180^\circ + 36^\circ = 216^\circ\n * *Solve \tan(\theta) = -0.9004$:
- Quadrants II and IV.
- Solutions: ;
- Solve \sin(\theta) = -0.9848$:*\n * Quadrants III and IV. \theta_R = \sin^{-1}(0.9848) \approx 80^\circ\n * Solutions: \theta = 180^\circ + 80^\circ = 260^\circ\theta = 360^\circ - 80^\circ = 280^\circ\n * *Solve \sin(\theta) = 0.6485$:
- Quadrants I and II.
- Solutions:
- Solve \cos(\theta) = -0.8219$:*\n * Quadrants II and III. \theta_R = \cos^{-1}(0.8219) \approx 35^\circ\n * Solutions: \theta = 180^\circ - 35^\circ = 145^\circ\theta = 180^\circ + 35^\circ = 215^\circ\n * *Solve 4\cos(\theta) = -1 \implies \cos(\theta) = -0.25$:
- Quadrants II and III.
- Solutions: ;
- Solve \tan(\theta) + 5 = 0 \implies \tan(\theta) = -5$:*\n * Quadrants II and IV. \theta_R = \tan^{-1}(5) \approx 79^\circ\n * Solutions: \theta = 180^\circ - 79^\circ = 101^\circ\theta = 360^\circ - 79^\circ = 281^\circ\n * *Solve 2\cos(\theta) + 1 = 0 \implies \cos(\theta) = -0.5$:
- Quadrants II and III.
- Solutions:
- Solve for 90^\circ \le \theta < 180^\circ$:*\n * \sin(\theta) = \frac{1}{\sqrt{2}} \implies \theta_R = 45^\circ\theta = 135^\circ\n * *Solve \tan(\theta) = -1180^\circ \le \theta \le 360^\circ$:
- Restricted to QIV:
- Solve \tan(\theta) = 0.6753$:*\n * Quadrants I and III. \theta_R = \tan^{-1}(0.6753) \approx 34^\circ\n * Solutions: \theta = 34^\circ, 214^\circ\n * *Solve \sin(\theta) = -0.8090$:
- Quadrants III and IV.
- Solutions: ;
Oblique Triangles and the Sine Law
The Sine Law Principle:
- Applicable to any triangle (scalene, acute, obtuse, or right).
- States that the lengths of the sides of a triangle are directly proportional to the sines of their opposite angles.
- Formulations:
- Form for unknown side lengths:
- Form for unknown angle measures:
Required Conditions:
- Minimum of 3 known elements.
- Must include at least one complete matching angle-side opposite pair (e.g., and ), plus one other piece of information (either another side or another angle).
- Scenarios: AAS (Angle-Angle-Side), ASA (Angle-Side-Angle), and SSA (Side-Side-Angle).
Worked Examples — Determining Side Lengths:
- Communications Satellite Tracking:
- Ground stations A and B are separated by . Elevation angle from A to satellite is ; from B to satellite is .
- Vertex angle at satellite .
- Distance from satellite to Tower B (side across from ):
- Pudluk's Cabin, Friend's Cabin, and the Tower:
- Distance between cabins . Angles: , .
- Angle at tower .
- Distance from Pudluk's cabin to tower ( opposite ):
- Distance from friend's cabin to tower ( opposite ):

Triangle Side Length Practice:
Triangle with , , :
Triangle with side , opposite angle , missing side opposite :
Ferryboat lake crossing: Towns V and U with opposite angle calculations yielding lake width .
Worked Examples — Determining Angles:
In with , , and :
- Solve for :
- Solve for third angle :
Triangle Angle Practice:
- Angle opposite side with angle opposite side :
- Angle opposite side with angle opposite side :
- Triangle with , , :
The Ambiguous Case of the Sine Law (SSA)
Definition and Foundation:
- Occurs exclusively when given two sides and a non-included acute or obtuse angle opposite one of those sides (SSA).
- Ambiguity: The given measurements do not uniquely describe a single geometric shape; there may be no triangle, one triangle, or two non-congruent triangles.
- Calculator limitation: Calculators only return the primary acute inverse sine result (). If a secondary obtuse angle exists, it is the supplementary angle: .
Altitude Calculation Criterion:
- Drop a perpendicular altitude from the vertex opposite the unknown base:
Mathematical Conditions for Acute Angles ():
- Case 1 (): Side is shorter than the vertical height (). The side cannot bridge the distance to the baseline. No triangle exists (0 solutions).
- Case 2 (): Side exactly equals the altitude (). Exactly touches the baseline perpendicularly. One unique right triangle exists (1 solution).
- Case 3 (): Side is longer than the altitude but shorter than adjacent side (). Side can swing inward or outward, intersecting the baseline at two points. Two distinct triangles exist (2 solutions: one acute, one obtuse).
- Case 4 (): Side is greater than or equal to adjacent side . Swinging inward intersects the baseline behind vertex , invalidating angle . One unique oblique triangle exists (1 solution).




- Mathematical Conditions for Obtuse Angles ():
- Case 1 (): Side is shorter than or equal to adjacent side . The side cannot reach the baseline across the wide angle. No triangle exists (0 solutions).
- Case 2 (): Side is strictly longer than adjacent side . Intersects the baseline at exactly one point forward of . One unique obtuse triangle exists (1 solution).



Detailed Case Studies — Determining the Number of Solutions:
- with :
- Altitude:
- Comparison: () Two solutions.
- Primary angle:
- Secondary angle:
- with :
- Altitude:
- Comparison: 1 solution (right triangle).
- with :
- Angle is obtuse (). Comparison: () 1 solution.
- with :
- Altitude:
- Comparison: () 2 solutions.
- with :
- Angle is obtuse. Comparison: () 0 solutions.
- with :
- Angle is acute. Comparison: () 1 solution.
- with :
- Altitude:
- Comparison: () 0 solutions.
Fully Solved Ambiguous Triangles:
- with :
- Height: .
- Relation: () Two triangles exist.
- Triangle 1 (Acute):
- Triangle 2 (Obtuse):
- with :
- Height: .
- Relation: () Two triangles.
- Triangle 1: , ,
- Triangle 2: , ,
- with :
- Height: .
- Comparison: () No solutions (0 triangles).
- with :
- Angle is obtuse () and () One triangle.
- Solving:
- with :
- Height: .
- Relation: () Two triangles.
- Triangle 1: , ,
- Triangle 2: , ,
- with :
- Height: .
- Relation: () Two triangles.
- Triangle 1: , ,
- Triangle 2: , ,
- Area Problem ():
- Third angle .
- Side : .
- Area formula: .
The Cosine Law and Applications
The Cosine Law Principle:
- Generalizes the Pythagorean theorem to any oblique triangle by incorporating an angle correction factor ().
- Standard Form (solving for unknown side length):
- Rearranged Form (solving for unknown angle measure):
Required Conditions:
- SAS (Side-Angle-Side): Two sides and the contained (included) angle are known. Used to solve for the opposite third side.
- SSS (Side-Side-Side): All three side lengths are known. Used to compute any angle measure.
Worked Examples — Determining Unknown Distances:
- Fishing Lake Swamp Surveying Problem:
- Surveyor transit at point P. Sight distances to swamp ends: and . Angle of sight .
- Distance across swamp ():
- Nina's Pond Distance Problem:
- Point C located from A and from B. Included angle .
- Distance ():
- Golf Green Dispersion Angle Problem:
- Green width , distance from position to both sides .
- Allowable dispersion angle :

Worked Examples — Determining Angles from Three Sides (SSS):
- In with , solve for :
- In a triangle with sides , solve for the angle opposite :
- In with sides , solve for :
- In with sides , solve for :
Exact Radical Values with the Cosine Law:
- Triangle with sides , , and contained angle :
- Triangle with sides , , and contained angle :
Solving Triangles Toolbox and Strategy
- Decision Matrix for Triangle Problem Solving:
| Triangle Context | Known Information | Recommended Primary Tool | Secondary Tool |
|---|---|---|---|
| Right Triangle | Two sides | Pythagorean Theorem () | Primary Trig Ratios |
| Right Triangle | One side and one acute angle | SOH CAH TOA | Angle sum () |
| Any Triangle | Two angles and any side (AAS / ASA) | Sum of angles () | Sine Law |
| Any Triangle | Complete opposite pair plus side (SSA) | Sine Law (Ambiguous Case Analysis) | Angle sum () |
| Any Triangle | Two sides and included angle (SAS) | Cosine Law () | Sine Law (solve smallest angle) |
| Any Triangle | Three side lengths (SSS) | Cosine Law () | Sine Law |
Critical Strategic Rule of Thumb:
- When transitioning from the Cosine Law to the Sine Law in an SAS problem, always solve for the smallest remaining angle first (the angle opposite the shorter known side).
- Rationale: The smallest angle in a triangle is guaranteed to be acute (). Sine ratios cannot distinguish between acute angles and obtuse angles (), whereas the Cosine Law naturally yields a negative cosine for obtuse angles ().
- When solving an SSS triangle, always find the largest angle first (opposite the longest side) using the Cosine Law. If that angle is obtuse, the cosine ratio will evaluate to a negative number, correctly identifying it and leaving only guaranteed acute angles for subsequent steps.
Comprehensive Synthesis Practice Problems:
- Problem 1: In , , , :
- Solve for side using Cosine Law (SAS):
- Solve for the smaller angle across from using Sine Law:
- Find final angle :
- Final values: , , .
- Problem 2: In a triangle with sides , , and included angle :
- Missing side:
- Problem 3: In a triangle with sides , , and , find the largest angle:
- The largest angle is opposite the longest side ():
- Problem 4: In , , , :
- Side via Cosine Law:
- Solve for smaller angle via Sine Law:
- Find angle :
- Final values: , , .