Pig Production - Lecture Notes Flashcards

Introduction

  • Pig production is introduced as highly efficient animals capable of producing large amounts of high-quality lean meat cost-effectively.
  • Pigs have been domesticated for meat production and other roles (religious rituals, pets, working animals) and serve as a biomedical model for humans.
  • Domestication timeline:
    • Developed about 40 million years ago.
    • Domesticated about 9,000 years ago.
    • Domestic pig (Sus scrofa domesticus) originated from European wild boar (Sus scrofa) and the Eastern banded pig (Sus vittatus).
    • Spread globally via ships (Sus scrofa, Sus vittatus, Sus scrofa domesticus).
  • Anatomy note (from slide): Equal-toed but single-stomached; pigs are integrated into daily life across cultures.
  • Digestive tract (organ list): Liver, Duodenum, Esophagus, Stomach, Rectum, Colon, Ileum, Cecum, Jejunum.
  • Quick rationale for pigs’ use in production: early maturation, short generation interval, fast genetic progress, gestation around 115 days, high fecundity, 2.6 litters per sow per year, about 12 piglets per litter, around 26+ pigs sold per sow per year, fast growth (>1 kg/day), good feed conversion ratio (FCR), and adaptability to different environments.
  • Key production drivers: rapid reproductive capacity, rapid growth, efficient feed use, and environmental adaptability.

Why pigs? – Major factors

  • Early maturing
  • Short generation interval
  • Fast genetic progress
  • Gestation about 115115 days
    • 115 days=3 months 3 weeks 3 days115\text{ days} = 3\text{ months } 3\text{ weeks } 3\text{ days}
  • High fecundity: 2.62.6 litters per sow per year
  • Typical litter size: ≈12\approx 12 piglets
  • Wean-to-market efficiency: 26+26+ pigs sold per sow per year
  • Growth performance: faster growth rates (often >1 kg/day1\text{ kg/day})
  • Efficient feed conversion ratio (FCR)
  • Environmental adaptability

Production systems

  • Two broad systems:
    • Extensive: low input, low productivity
    • Intensive: high input, high productivity
  • Consumer pressures have pushed demand toward welfare-conscious extensive systems
  • Important caveat: consumer concerns do not always align with the actual issues; the idea is that if the consumer perceives a problem, it may need addressing, even if not exactly as perceived.
  • Practical implication: producers respond to consumer expectations through welfare, biosecurity, nutrition, and facility design.

Pig production in South Africa (SA)

  • Over the past 50 years, the SA pig industry has undergone significant changes:
    • Initially extensive farming with open houses, poor biosecurity, and few breeding objectives; nutrition was often low quality (organic waste).
    • Rising pork demand spurred a drive for food security with improved biosecurity, nutrition management, and breeding objectives.
    • Larger production units increased environmental impact, leading to legislation on manure management, mortalities, welfare, and facility design.
    • Voluntary quality standards emerged due to rising demand for food security.
  • SA production status (key figures):
    • Approximately 110,000110{,}000 active sows in SA.
    • More than 2.2×1062.2\times 10^6 slaughterings per year.
    • About 400400 meat producers and 2525 stud breeders.
    • Industry split:
    • Commercial intensive: roughly 110,000110{,}000 sows.
    • Extensive: roughly 20,00020{,}000 sows.
    • Commercial production spread over around 350350 farms.
    • Farm size distribution:
    • 40% of farms have between 40 and 15040\text{ and }150 sows.
    • 60% have between 400 and 2500400\text{ and }2500 sows.
    • Marketing infrastructure: 4646 registered abattoirs; open market and contract sales.
    • Price determination:
    • Open market: price decided in the week of slaughter.
    • Contract sales: price determined for the contract period.

Geographic distribution (SA provinces) – 2006 reference

  • Provincial distribution of pig population (August 2006):
    • Gauteng: 10%
    • Limpopo: 24%
    • Mpumalanga: 8%
    • KwaZulu-Natal: 10%
    • Free State (Vrystaat): 6%
    • Eastern Cape (Oos-kaap): 8%
    • Northern Cape (Noord-kaap): 2%
    • Western Cape (Wes-kaap): 11%
    • North West (Noord-Wes): 21%

Carcass sales and market economics (SA)

  • Carcass sales split roughly 50:5050:50 between fresh meat and processing.
  • Traditional carcass weight was < 63 kg63\text{ kg}, but there is a movement toward larger carcasses.
  • Economic aspects of carcass weight:
    • Increased carcass weight improves ease of handling, carcass yields, and meat quality, leading to higher profit per kg produced as weight increases.
    • Heavy carcasses (>100 kg100\text{ kg}) are typically processed.
    • Profit per kg produced tends to increase with heavier carcass weight.

Slaughter procedure in SA

  • Sequential steps in the slaughter process:
    • Stunned
    • Exsanguinated
    • Hoisted
    • De-haired
    • Eviscerated
    • Carcasses marketed with head and trotters
    • For heavy carcasses, processing may involve halving and removing the head; depends on abattoir capabilities to handle heavy carcasses.

Pork marketing criteria

  • Remuneration to farmers depends on:
    • Weight of carcass
    • Class of carcass
    • Build/shape of carcass
    • Damage to carcass
    • Sex type of carcass
  • Weight categories (example classifications):
    • Weaner: < 20 kg
    • Porker: > 21 kg and < 60 kg
    • Baconer: > 61 kg and < 100 kg
    • Heavy baconer: > 80 kg
    • Cutter: > 60 kg and < 70 kg
    • Sausage pigs: > 100 kg
    • Ungraded: not suitable for human consumption, not weighed and not classed

Class of carcass (meat yield and fat depth)

  • Not applicable to weaners, sausage, and crudes.
  • Calculated using back fat and eye muscle depth with two estimator formulas:
    • Back fat thickness only: y=74.4367−0.4023x1y = 74.4367 - 0.4023 x_{1}
    • Back fat thickness and eye muscle depth: y=72.5114−0.4618x<em>1+0.0547x</em>2y = 72.5114 - 0.4618 x<em>{1} + 0.0547 x</em>{2}
  • Where:
    • x1x_{1} = back fat thickness (mm)
    • x2x_{2} = eye muscle depth (mm)

Pork carcass classification criteria (detailed)

  • Classification based on Meat % and Back fat thickness (mm):
    • P: Meat % ≥ 70; Back fat ≤ 12 mm
    • O: Meat 68–69%; Back fat 13–17 mm
    • R: Meat 66–67%; Back fat 18–22 mm
    • C: Meat 64–65%; Back fat 23–27 mm
    • U: Meat 62–63%; Back fat 28–32 mm
    • S: Meat ≤ 61%; Back fat > 32 mm
  • Special notes: “Ru, Suckers” (≤20 kg) and “sausagers” (≥100 kg) are mentioned as exceptions in the table.

Carcass conformation and damage classifications

  • Conformation classes (for carcass shape):
    • Very Flat (1)
    • Flat (2)
    • Medium (3)
    • Round (4)
    • Very Round (5)
  • Damage classes (carcass condition):
    • Slight (1)
    • Moderate (2)
    • Severe (3)
  • Sex determination in carcasses: Only boar carcasses are identified for sex-related labeling.

Physiological / production stages

  • Suckling pig: still with the sow and consuming milk.
  • Weaner: removed from mother; consumes wet feed or dry feed or milk and feed.
  • Grower: pig larger than 30 kg destined for slaughter.
  • Gilt: female pig larger than 30 kg destined for breeding but not yet pregnant.
  • Open sow: sow that has farrowed at least once but is neither pregnant nor lactating.
  • Dry sow / pregnant sow: sow that has farrowed at least once and is pregnant but not lactating.
  • Lactating: sow with piglets and lactating.
  • Boar: male animal used for breeding.
  • Barrow / castrated: castrated male animal destined for slaughter.

DRY SOW and reproduction

  • Reproduction in pigs depends on anatomy, physiology, and behavior.
  • Dry sow: open sow; not pregnant and not lactating.
  • Reproductive cycle length: about 7 days7\text{ days} per cycle.
  • Pregnant sow: pregnant and not lactating.
  • Pregnancy length: 115 days115\text{ days} (3 months 3 weeks 3 days3\text{ months } 3\text{ weeks } 3\text{ days}).

Mating strategies

  • Natural mating vs artificial insemination (AI).
  • Natural service options:
    • Hand service
    • Supervised service
    • Accurate records on parentage and pregnancy
    • Higher survival rates in natural mating scenarios
  • Field service challenges:
    • Boar is with sows; aggressive behavior and fighting if allowed together
    • Poor records and lack of parentage/pregnancy data
    • Lower litter survival in poorly managed field service

Artificial insemination (AI)

  • AI is not new technology.
  • Sperm is typically not frozen (as of the slide's content).
  • Critical considerations to AI success:
    • Avoid environmental shock (temperature, light)
    • Proper dilution and contamination control
    • Effective heat detection for estrus
  • NB: Practical emphasis on management and biosecurity surrounding AI.

Pregnancy development timeline

  • Fertilization occurs in the fallopian tubes.
  • Fertilized ova move down the oviducts to the uterus about day 3 after fertilization.
  • Cell specialization begins at day 6.
  • Implantation begins at day 11 and is completed by day 19.
  • Clarification concept: Embryo vs fetus vs conceptus (terminology often discussed in reproductive biology).

Farrowing

  • Definition: the birthing process in pigs.
  • Sows move to a farrowing house about one week before due date.
  • Importance of adaptation to new environment and pre-farrowing management to ensure successful birth.

Suckling pig – survival and risks

  • Survival is a primary concern in early stages.
  • Average live weight of newborn piglets is around 1.3 kg1.3\text{ kg}.
  • Newborns face hazards such as hypothermia and squashing.
  • Piglets are highly demanding in their early days; survival hinges on warm, dry, and safe environment and adequate nutrition.

Weaners

  • Environmental requirements are critical:
    • Warm environment
    • Warm and dry with no drafts
    • Fresh clean water and clean fresh feed
  • Emphasis: QUALITY AND EFFORT AT THIS STAGE IS A GOOD INVESTMENT.

Growers / Finishers

  • Slaughter classifications:
    • Porker: carcass < 60 kg
    • Baconers: carcass < 80 kg
    • Heavy baconers: carcass < 100 kg
  • Max slaughter age targeted: up to about 150 days150\text{ days} old.

Key connections to broader themes

  • Production systems reflect trade-offs between input costs, welfare, and productivity; consumer perception drives welfare-oriented improvements but may not always align with underlying issues.
  • SA-specific context highlights how nutrition, biosecurity, breeding objectives, and legislation around environmental impacts shape industry structure and market dynamics.
  • Marketing and pricing depend on carcass characteristics (weight, fat depth, muscle depth), conformation, and quality classifications, illustrating the link between production practices and economic outcomes.

Ethical, philosophical, and practical implications

  • Consumer-driven welfare concerns can push for higher biosecurity, better nutrition, and improved housing, potentially incurring costs but improving public perception and market access.
  • The use of animals in biomedical research (as a model for humans) raises ethical considerations balanced against scientific advances.
  • Labor and animal welfare considerations are implicit in the adoption of larger, more intensive units and the need for well-designed slaughter and processing facilities to ensure humane handling.

Formulas and numerical references summary

  • Pregnancy length: 115 days115 \text{ days} (also expressed as 3 months 3 weeks 3 days3\text{ months } 3\text{ weeks } 3\text{ days}).
  • Back fat thickness and relation to meat yield:
    • y=74.4367−0.4023x1y = 74.4367 - 0.4023 x_{1}
    • y=72.5114−0.4618x<em>1+0.0547x</em>2y = 72.5114 - 0.4618 x<em>{1} + 0.0547 x</em>{2}
  • Meat percentage vs fat depth classification (illustrative):
    • P: Meat ≥70%, Back fat ≤12 mm\text{P: Meat }\ge 70\% , \text{ Back fat } \le 12\text{ mm}
    • O: 68−69%,13−17 mm\text{O: } 68-69\% , 13-17\text{ mm}
    • R: 66−67%,18−22 mm\text{R: } 66-67\% , 18-22\text{ mm}
    • C: 64−65%,23−27 mm\text{C: } 64-65\% , 23-27\text{ mm}
    • U: 62−63%,28−32 mm\text{U: } 62-63\% , 28-32\text{ mm}
    • S: ≤61%,>32 mm\text{S: } \le 61\% , >32\text{ mm}
  • Classification notes: special cases for Ru (suckers) and sausagers (≥100 kg) exist where the standard category applies differently.

Notes on terminology and scope

  • Terms such as weaner, porker, baconer, heavy baconer, cutter, and sausage pigs refer to weight-based marketing categories.
  • Suckling pig refers to the earliest stage still nursing from the sow.
  • The material emphasizes SA-specific data but includes universal pig production concepts such as AI, natural mating, pregnancy, farrowing, and marketing classifications.