Solutions and Solubility
Solutions and Solubility
1. Solution Definition & TypesSolution
Solutions may be described as a single-phase system composed of two or more substances representing homogeneous molecular dispersion.
Composed of solute and solvent.
Solute: The substance that is dissolved.
Solvent: The medium that does the dissolving.
The phase is established usually by the solvent because it is present in larger amount.
Solvents characterized by their capacity to dissolve a solute.
Types of Solutions
Type of Solution | Solute Phase | Solvent Phase | Example |
|---|---|---|---|
Gas in gas | Gas | Gas | Air (O2 in N2) |
Gas in liquid | Gas | Liquid | CO2 in soda |
Liquid in liquid | Liquid | Liquid | Ethanol in water |
Solid in liquid | Solid | Liquid | NaCl in water |
Solid in solid | Solid | Solid | Alloys (brass = Zn in Cu) |
Saturation Levels
Saturated solution: Contains the maximum amount of solute that will dissolve in a given solvent at a specific temperature.
Unsaturated solution: Contains less solute than it has the capacity to dissolve.
Supersaturated solution: Contains more solute than is present in a saturated solution (unstable, crystals form).
2. The Solubility Process & EnergeticsProcess Steps
Step 1: Breaking Solute-Solute Interactions (dH1)
Solute particles must separate from each other.
Requires energy (endothermic) to overcome intermolecular forces: Ionic bonds (in salts), Hydrogen bonds (in polar molecules), Van der Waals forces (in nonpolar molecules).
Step 2: Breaking Solvent-Solvent Interactions (dH2)
Solvent molecules must move apart to make space for solute particles.
Requires energy (endothermic) to separate solvent molecules attracting each other through hydrogen bonding or dipole-dipole interactions.
Step 3: Formation of Solute-Solvent Interactions (dH3)
Solute particles are surrounded (solvated) by solvent molecules.
Releases energy (exothermic) as new intermolecular forces are formed.
Net Enthalpy of Solution
Overall enthalpy equation:
dH(solution) = dH1 + dH2 + dH3
If dH(soln) < 0 (Exothermic): Solute-solvent attraction is stronger than solvent-solvent and solute-solute interactions. Releases heat; solubility decreases with temperature.
If dH(soln) > 0 (Endothermic): Solute-solvent attraction is weaker than solvent-solvent and solute-solute interactions. Absorbs heat; solubility increases with temperature.
3. Solubility Definitions & Descriptive TermsDefinition
Maximum amount of solute that can dissolve in a specific amount of solvent at a given temperature and pressure to form a saturated solution.
Measured in
g / 100 g solventormol / L(molarity).
Descriptive Terms (USP/Pharmacopeial Standards)
Descriptive Term | Volume of Solvent Required per 1 g Solute |
|---|---|
Very soluble | Less than 1 mL |
Freely soluble | From 1 to 10 mL |
Soluble | From 10 to 30 mL |
Sparingly soluble | From 30 to 100 mL |
Slightly soluble | From 100 to 1,000 mL |
Very slightly soluble | From 1,000 to 10,000 mL |
Practically insoluble | 10,000 mL or more |
4. Molecular View of Solubility
Principle: "Like dissolves like"
Polar Solute in Polar Solvent: Strong dipole-dipole or ion-dipole interactions form. (Example: NaCl in water completely dissociates into Na+ and Cl-).
Nonpolar Solute in Nonpolar Solvent: Weak dispersion (London) forces dominate. (Example: Naphthalene in benzene dissolves due to induced dipole interactions).
5. Concentration Expressions & Formulas
Molarity (M): Moles of solute per liter of solution.
M = ( (g solute) / MW ) / (L solution)
Normality (N): Equivalents of solute per liter of solution.
N = ( (g solute) / (MW / f) ) / (L solution)
(where f = equivalence factor)
Molality (m): Moles of solute per kilogram of solvent.
m = ( (g solute) / MW ) / (kg solvent)
Percent Weight-in-Volume (% w/v): Parts of solute per 100 parts of solution.
% w/v = (g solute / mL solution) * 100
6. Solubility Product Constant (Ksp) & Common Ion EffectDefinition & Expressions
Kspis the product of the molar concentrations of constituent ions raised to their stoichiometric powers.Examples:
MgF2(s) <-> Mg2+(aq) + 2 F-(aq)
Ksp = [Mg2+] * [F-]^2
Ag2CO3(s) <-> 2 Ag+(aq) + CO3 2-(aq)
Ksp = [Ag+]^2 * [CO3 2-]
General equation
MxAy(s) -> x M^y+(aq) + y A^x-(aq):
Ksp = [M^y+]^x * [A^x-]^y
Reaction Quotient (Q) vs Ksp
Q < Ksp: Unsaturated solution (no precipitate)Q = Ksp: Saturated solution at equilibriumQ > Ksp: Supersaturated solution (precipitation occurs)
Common Ion Effect
Presence of a common ion from another salt reduces the solubility of an ionic compound.
Contributions from all salts must be included in calculating the total common ion concentration.
7. Lattice Energy vs. Hydration Energy
Lattice Energy (dH_LE): Energy required (endothermic) to break 1 mole of solid crystal lattice into separated ions.
Hydration Energy (dH_hyd): Energy released (exothermic) when ions interact with water molecules.
High Lattice Energy: Strong ionic forces in the crystal. If hydration energy is lower, solubility is low.
Low Lattice Energy: Weaker ionic forces in the crystal; easily overcome by hydration energy, leading to high solubility.
8. General Inorganic Solubility Rules
Group 1 & Ammonium: All salts of Group 1 alkali metals (
Li+,Na+,K+,Rb+,Cs+) and ammonium (NH4+) are soluble.Nitrates: All nitrates (
NO3-) are soluble.Chlorates, Perchlorates, Acetates: All chlorate (
ClO3-), perchlorate (ClO4-), and acetate (CH3COO-orC2H3O2-) salts are soluble.Halides: All chlorides (
Cl-), bromides (Br-), and iodides (I-) are soluble, EXCEPT those ofAg+,Hg2 2+, andPb2+.Sulfates: Most sulfates (
SO4 2-) are soluble, EXCEPTBaSO4,PbSO4,SrSO4,Ag2SO4,CaSO4, andHg2SO4.Carbonates & Phosphates: All carbonates (
CO3 2-), phosphates (PO4 3-), and chromates (CrO4 2-) are insoluble, EXCEPT those of Group 1 cations andNH4+.Hydroxides: All hydroxides (
OH-) are insoluble, EXCEPT Group 1 alkali metals,Ba(OH)2, andSr(OH)2. (Ca(OH)2is slightly soluble).Sulfides: All sulfides (
S2-) are insoluble, EXCEPT Group 1, Group 2 elements, andNH4+.
9. Colligative Properties & Van 't Hoff FactorDefinition
Properties that depend strictly on the number of solute entities, independent of their chemical identity.
Equations & Law
Vapor Pressure Lowering (Raoult's Law):
Pi = Xi * P_deg
(where Xi is mole fraction, P_deg is pure solvent vapor pressure)
Boiling Point Elevation:
dTb = i * Kb * m
Freezing Point Depression:
dTf = i * Kf * m
Osmotic Pressure:
Pi = i * M * R * T
Van 't Hoff Factor (i)
Non-electrolytes:
i = 1(molecules do not dissociate, e.g., glucose, ethanol, urea).Electrolytes: Theoretical
iequals the number of ions produced per formula unit:
NaCl -> 2 ions(i = 2)CaCl2 -> 3 ions(i = 3)
Degree of Dissociation (alpha):
i = 1 + alpha * (n - 1)
(where n = number of ions upon complete dissociation)
Real Solutions (
measured i < expected i):
Occurs due to ion pairing (transient association of oppositely charged ions), electrostatic interactions, and incomplete dissociation.
Measured vs Expected van 't Hoff Factors (at 0.05 m concentration)
Solute | i Expected | i Measured |
|---|---|---|
Nonelectrolyte | 1 | 1 |
NaCl | 2 | 1.9 |
MgSO4 | 2 | 1.3 |
MgCl2 | 3 | 2.7 |
K2SO4 | 3 | 2.6 |
FeCl3 | 4 | 3.4 |