Physics 154: Electromagnetic Induction Study Guide
Introduction to Electromagnetic Induction
Historical Context:
- For a long time, electricity and magnetism were considered separate and unrelated phenomena.
- In the early 19th century, experiments by Oersted, Ampere, and others established that electricity and magnetism are inter-related.
- It was discovered that moving electric charges (currents) produce magnetic fields; for instance, a current deflects a magnetic compass needle.
Defining Electromagnetic Induction (EMI):
- The Big Question: Can moving magnets produce electric currents? Is the converse of Oersted's discovery possible?
- The Answer: Yes. In 1830, Michael Faraday (England) and Joseph Henry (USA) independently demonstrated that electric currents are induced in closed coils when subjected to changing magnetic fields.
- Definition: The phenomenon in which electric current is generated by varying magnetic fields is called electromagnetic induction.
Founding Figures:
- Michael Faraday (1791–1867): Regarded as the greatest experimental scientist of the 19th century. Contributions include laws of electrolysis, benzene, the invention of the electric motor, electric generator, and transformer.
- Joseph Henry (1797–1878): American experimentalist, professor at Princeton, and first director of the Smithsonian Institution. He improved electromagnets, invented an electromagnetic motor and an efficient telegraph, and discovered self-induction.
Anecdote: When Faraday was asked about the utility of his discovery (relative motion producing small current), he replied: ‐‐What is the use of a new born baby?‐‐ This highlights that while initially theoretical, EMI paved the way for generators and transformers.
The Experiments of Faraday and Henry
Experiment 6.1: Magnet and Coil:
- Setup: A coil connected to a galvanometer .
- Observation: When the North-pole of a bar magnet is pushed towards the coil, the galvanometer deflects. The deflection lasts only as long as the magnet is in motion.
- Reversal: Pulling the magnet away causes a deflection in the opposite direction. Using the South-pole also reverses the deflection direction compared to the North-pole.
- Speed: Faster movement results in larger deflection (and thus larger current).
- Relative Motion: Moving the coil while keeping the magnet stationary produces the same result. Current is induced by the relative motion between the magnet and the coil.
Experiment 6.2: Two Coils (Moving Current):
- Setup: Bar magnet is replaced by a second coil connected to a battery.
- Observation: The steady current in creates a steady magnetic field. Moving towards or away from induces current in (detected by galvanometer deflection).
- Conclusion: Again, relative motion is the trigger for induction.
Experiment 6.3: Stationary Coils (Tapping Key):
- Setup: Two stationary coils, and . is connected to a battery through a tapping key .
- Observation:
- A momentary deflection is observed in when the key is pressed (start of current).
- No deflection occurs while the key is held continuously (steady current).
- Another momentary deflection in the opposite direction occurs when the key is released (end of current).
- Enhancement: Deflection increases dramatically if an iron rod is inserted along the axis of the coils.
Magnetic Flux
Definition: Magnetic flux through a plane of area in a uniform magnetic field is given by the scalar product:
- Where is the angle between the magnetic field vector and the area vector .
Non-Uniform Fields and Curved Surfaces:
- The surface is divided into small area elements .
- The total flux is the summation/integration over all elements:
General Properties:
- SI Unit: Weber () or Tesla meter squared ().
- Type: Scalar quantity.
Faraday’s Law of Induction
Summary Proposition: An electromotive force (emf) is induced in a coil when the magnetic flux through the coil changes with time.
The Law (Mathematical State):
- The magnitude of the induced emf in a circuit is equal to the time rate of change of magnetic flux through the circuit.
- For a coil with turns: If the coil is closely wound such that each turn experiences the same flux change:
Increasing Induced EMF:
- Increase the number of turns ().
- Change the magnetic field ().
- Change the area () of the coil (shrinking or stretching).
- Change the orientation () between and (rotation).
Lenz’s Law and Conservation of Energy
Lenz’s Law (1834): The polarity of the induced emf is such that it tends to produce a current which opposes the change in magnetic flux that produced it.
- This is represented by the negative sign in Faraday's equation.
Polarity Explanation:
- If the North-pole of a magnet approaches a coil, the induced current flows counter-clockwise (viewed from the magnet's side) to create its own North-pole, repelling the incoming magnet.
- If the North-pole is withdrawn, current flows clockwise to create a South-pole, attracting the magnet to oppose its movement.
Energy Conservation:
- If the induced current produced a pole that attracted the magnet further, the magnet would accelerate indefinitely, creating energy from nothing (violating the first law of thermodynamics).
- In reality, a person must do work to overcome the repulsive force. This mechanical work is converted into electrical energy, dissipated as Joule heating () in the wire.
Motional Electromotive Force
Scenario: A rod of length moves with velocity in a uniform, stationary magnetic field .
Derivation via Flux change:
- Area enclosed by rectangle is , where is the distance.
- Since (decreasing distance):
Derivation via Lorentz Force:
- Charge in rod moving at experiences magnetic force toward end .
- Work done moving charge from to : .
- EMF is work per unit charge: .
Theoretical Significance:
- In a stationary conductor with a changing field, the force on charges comes from an electric field () generated by the time-varying magnetic field.
- Crucially, electric fields from time-varying magnetism have different properties than those from static charges.
Inductance
Concept: Since , we define Inductance ( or ) as the constant of proportionality between flux linkage () and current ().
Properties:
- Depends on the geometry and intrinsic material properties (permeability).
- Scalar quantity.
- SI Unit: Henry ().
- Dimensions: .
Mutual Inductance ():
- Current in one coil induces flux in another.
- .
- For two co-axial solenoids of radius (inner) and , with length :
- If a medium of relative permeability is used: .
Self-Inductance ():
- Changing current in a coil induces a back EMF in itself.
- Self-inductance for a long solenoid:
- Energy storage: Inductance represents electrical inertia. Work done to establish current is stored as potential energy:
Magnetic Energy Density ():
- Energy per unit volume ():
AC Generator
Basic Principle: Conversion of mechanical energy into electrical energy using electromagnetic induction by rotating a coil in a magnetic field.
Components:
- Armature: A coil mechanically rotated (usually by steam or falling water).
- Rotor shaft.
- Magnetic Field: Provides constant
- Slip Rings and Brushes: Connect rotating coil to external circuit.
Mathematical Expression:
- Angle (where is angular speed).
- Flux .
- Maximum EMF () occurs when :
Power Plants:
- Hydro-electric: Water from dams.
- Thermal: Coalition or steam.
- Nuclear: Nuclear fuel.
- Modern generators can produce up to .
- Commercial frequency: (India), (USA).
Worked Examples and Problems
Example 6.2: Square loop (, ) in N-E direction, field drops to zero in .
- .
- .
- .
- .
Example 6.6: Metallic rod rotated at frequency , length , .
- .
Example 6.7: Wheel with 10 spokes ( each) rotating at in ().
- The number of spokes does not matter (parallel connection).
- .
- .
Questions & Discussion
Q: What happens if an open circuit is used?
- A: An emf is still induced across the open ends, but no current flows. The direction of this induced emf can still be determined by Lenz’s law.
Q: Is current induced in a loop moving through a constant electric field (capacitor plates)?
- A: No. Current is induced by changing magnetic flux, not changing electric flux in this context.
Q: Why is induced emf constant for a rectangular loop moving out of a field but not a circular one?
- A: For a rectangle moving at constant velocity, the rate of change of area entering/leaving is constant (). For a circle, the width (and thus rate of area change) varies throughout the passage.
Q: Is it possible to generate current with a very strong stationary magnet and stationary loop?
- A: No. Induction requires a change in magnetic flux through the loop, regardless of how strong the magnetic field is.