Work, Kinetic Energy, and Potential Energy Dynamics

Elasticity and Compressive Stress in Graphite Lead

  • Mechanical pencil cores are composed of graphite rather than elemental lead, possessing an elastic Young's modulus of approximately Y=1.0×109 N/m2Y = 1.0 \times 10^9\,N/m^2.
  • When tapping a mechanical pencil straight downward against a surface, an applied axial force compresses and shortens the lead.
  • System specifications for pencil lead deformation:
    • Applied downward compressive force: F=4.0 NF = 4.0\,N
    • Core diameter: d=0.50 mmd = 0.50\,mm
    • Core radius: r=d2=0.250 mm=2.5×10−4 mr = \frac{d}{2} = 0.250\,mm = 2.5 \times 10^{-4}\,m
    • Initial unstressed length: L0=60 mm=6.0×10−2 mL_0 = 60\,mm = 6.0 \times 10^{-2}\,m
    • Cross-sectional geometry: Circular area given by A=πr2=π(2.5×10−4 m)2A = \pi r^2 = \pi (2.5 \times 10^{-4}\,m)^2
  • Formulations for elastic deformation:
    • Tensile and compressive deformation is governed by the relation between stress and strain:     FA=Y(ΔLL0)\frac{F}{A} = Y \left(\frac{\Delta L}{L_0}\right)
    • Tensile or compressive stress is defined as force per unit area (FA\frac{F}{A}).
    • Strain is defined as the fractional change in length (ΔLL0\frac{\Delta L}{L_0}).
    • Related moduli in elasticity include the shear modulus (governing sideways shearing deformation) and the bulk modulus (governing uniform volumetric compression).
  • Algebraic derivation for length change (ΔL\Delta L):   ΔL=L0FAY\Delta L = \frac{L_0 F}{A Y}
  • Evaluation of compressive deformation:   ΔL=(6.0×10−2 m)(4.0 N)π(2.5×10−4 m)2(1.0×109 N/m2)\Delta L = \frac{(6.0 \times 10^{-2}\,m)(4.0\,N)}{\pi (2.5 \times 10^{-4}\,m)^2 (1.0 \times 10^9\,N/m^2)}ΔL=1.22×10−3 m\Delta L = 1.22 \times 10^{-3}\,mΔL=1.22 mm\Delta L = 1.22\,mm

Questions & Discussion: Dimensional Analysis and Unit Conversions

  • Student Inquiry: In dynamics problems, grams must always be converted to kilograms to solve equations properly. For elastic deformation equations, does it matter whether values are kept in millimeters or converted to meters? Is converting to meters standard practice?
  • Response on Base SI Units and Dimensional Analysis:
    • Converting all dimensional values directly to standard SI units (meters, kilograms, seconds) is the standard and safest procedure.
    • The Newton (NN) is defined in terms of fundamental base SI units:     1 N=1 kg⋅m/s21\,N = 1\,kg \cdot m/s^2
    • Mass must always be converted from grams to kilograms when forces are expressed in Newtons to maintain unit consistency.
    • Dimensional breakdown of the deformation formula:
    • Numerator contains length in meters (mm) multiplied by force in Newtons (kg⋅m/s2kg \cdot m/s^2).
    • Denominator contains area in square meters (m2m^2) multiplied by Young's modulus in Newtons per square meter (N/m2=(kg⋅m/s2)/m2N/m^2 = (kg \cdot m/s^2)/m^2).
    • Canceling terms reveals:       11m=m\frac{1}{\frac{1}{m}} = m
    • Maintaining millimeters throughout the calculation requires converting Newtons to millinewtons and Young's modulus from N/m2N/m^2 to N/mm2N/mm^2.
    • Converting multiple derived parameters requires three separate conversions, whereas converting millimeter lengths to meters requires only two conversions, reducing calculation steps and opportunities for error.

Fundamentals of Work and Energy

  • Work is defined as a force acting on an object that causes displacement over a specific distance.
  • Mathematical definition of work performed by a constant force:   W=Fdcos⁡(θ)W = F d \cos(\theta)
    • FF is the magnitude of the applied force.
    • dd is the displacement distance.
    • θ\theta is the angle between the force vector and the displacement vector.
    • The cos⁡(θ)\cos(\theta) term isolates the component of force acting parallel to the direction of motion; perpendicular force components perform zero work.
  • Units of measurement:
    • Base unit product: Newton-meters (N⋅mN \cdot m).
    • Derived standard SI unit: Joule (JJ), where 1 J=1 N⋅m1\,J = 1\,N \cdot m.
  • Energy transfer mechanisms in physical systems:
    • Work represents energy transferred into or out of a system.
    • Pushing an object transfers energy into the system, increasing its kinetic energy.
    • Opposing forces, such as friction, perform negative work by removing kinetic energy from the system.
    • Frictional dissipation transforms mechanical kinetic energy into thermal energy (heat) and acoustic energy (sound).
    • Rubbing hands together in cold conditions illustrates this conversion: muscular work opposes friction, converting input energy into heat and audible sound.

Derivation of the Work-Kinetic Energy Theorem

  • The derivation originates from Newton's Second Law of Motion:   Fnet=maF_{net} = m a
  • Defining net work (WnetW_{net}) across a displacement where force and displacement are collinear (θ=0∘\theta = 0^\circ, cos⁡(0∘)=1\cos(0^\circ) = 1):   Wnet=Fnetdcos⁡(0∘)=FnetdW_{net} = F_{net} d \cos(0^\circ) = F_{net} dWnet=madW_{net} = m a d
  • Incorporation of linear kinematic relations:
    • Kinematic equation relating velocities, uniform acceleration, and displacement:     v2=v02+2adv^2 = v_0^2 + 2 a d
    • The variable dd represents scalar linear displacement along any translational coordinate axis (xx or yy).
    • Solving explicitly for linear acceleration (aa):     a=v2−v022da = \frac{v^2 - v_0^2}{2 d}
  • Substitution of acceleration into the net work expression:   Wnet=m(v2−v022d)dW_{net} = m \left(\frac{v^2 - v_0^2}{2 d}\right) d
  • Canceling the displacement variable (dd) and distributing mass (mm):   Wnet=12mv2−12mv02W_{net} = \frac{1}{2} m v^2 - \frac{1}{2} m v_0^2
  • Formal definition of kinetic energy (KEKE):   KE=12mv2KE = \frac{1}{2} m v^2
    • Kinetic energy represents the energy an object possesses due to translational motion.
  • Formulation of the Work-Kinetic Energy Theorem:   Wnet=KEf−KEi=ΔKEW_{net} = KE_f - KE_i = \Delta KE
    • The total net work performed on an object equals its net change in kinetic energy.
    • Serves as an analytical tool to calculate work directly from initial and final velocities without requiring explicit acceleration or force determinations.

Gravitational Potential Energy and Conservation of Energy

  • Potential energy represents stored energy capable of being released and converted into kinetic energy.
  • Gravitational potential energy (PEgPE_g) is stored when external work is performed against a gravitational field to elevate an object.
  • Mechanical work applied to lift an object vertically against gravity:
    • Work expression: W=madW = m a d
    • Vertical displacement is denoted as height (hh).
    • Overcoming gravity requires an upward acceleration equal in magnitude to free-fall acceleration (g=9.8 m/s2g = 9.8\,m/s^2).
  • Formulation of gravitational potential energy:   PEg=mghPE_g = m g h
  • Energy transformation cycle:
    • Work is performed to elevate an object to height hh, storing energy as PEgPE_g.
    • Upon release, gravity performs work on the object, accelerating it downward and transforming stored PEgPE_g back into KEKE.
  • Law of Conservation of Energy:
    • Energy cannot be created or destroyed; it transforms from one form to another.
    • In an isolated system, the total initial energy equals total final energy:     Etotal,i=Etotal,fE_{total, i} = E_{total, f}
    • Enables solving for unknown kinematic or spatial variables by equating initial and final energy states.

Application: Work Done by a Kookaburra Lifting Prey

  • Scenario parameters:
    • A kookaburra (large kingfisher bird) lifts an 85 g85\,g snake vertically from ground level (h0=0 mh_0 = 0\,m) to a tree branch at height h=2.1 mh = 2.1\,m.
    • Mass of kookaburra: mbird=365 g=0.365 kgm_{bird} = 365\,g = 0.365\,kg
    • Mass of snake: msnake=85 g=0.085 kgm_{snake} = 85\,g = 0.085\,kg
    • Vertical height: h=2.1 mh = 2.1\,m
    • Acceleration due to gravity: g=9.8 m/s2g = 9.8\,m/s^2
  • Analytical approach:
    • Total work (WtotalW_{total}) or net work required equals the sum of the work performed to elevate the bird's own body and the work performed to elevate the prey:     Wtotal=Wbird+WsnakeW_{total} = W_{bird} + W_{snake}
    • Individual work terms:     Wbird=mbirdghW_{bird} = m_{bird} g hWsnake=msnakeghW_{snake} = m_{snake} g h
  • Algebraic factoring and calculation:   Wtotal=(mbird+msnake)ghW_{total} = (m_{bird} + m_{snake}) g hWtotal=(0.365 kg+0.085 kg)(9.8 m/s2)(2.1 m)W_{total} = (0.365\,kg + 0.085\,kg)(9.8\,m/s^2)(2.1\,m)Wtotal=(0.450 kg)(9.8 m/s2)(2.1 m)W_{total} = (0.450\,kg)(9.8\,m/s^2)(2.1\,m)Wtotal=9.26 JW_{total} = 9.26\,J
  • Physical result: The bird expends 9.26 J9.26\,J of mechanical energy, which remains stored as the total gravitational potential energy of the bird-snake system at the branch elevation.

Conservative Forces and Elastic Potential Energy

  • Definition of a conservative force:
    • A force is conservative if the work it performs on an object moving between two configurations depends only on the initial and final positions, regardless of the physical path taken.
  • Path independence of gravitational work:
    • Elevating an object straight up requires work equal to mghm g h.
    • Elevating an object along an indirect or meandering path (incorporating horizontal displacement) requires the exact same gravitational work (mghm g h).
    • Horizontal forces and displacements act orthogonally to the gravitational vector and do not alter gravitational work.
  • Elastic restoring forces and Hooke's Law:
    • Restoring force exerted by an ideal spring:     Fs=−kxF_s = -k x
    • kk represents the spring constant (stiffness).
    • xx represents displacement from the equilibrium position.
    • The negative sign indicates that the restoring force acts in the opposite direction of the displacement.
  • Elastic potential energy:
    • Work performed to stretch or compress a spring over a distance dd is stored internally as elastic potential energy.
    • When released, stored elastic potential energy converts to kinetic energy as the spring contracts.
    • Upon colliding with a boundary or hand, kinetic energy rapidly dissipates into thermal energy and acoustic waves.

Laboratory Structure and Class Schedule

  • Practical application of energy principles is conducted in the laboratory session at 2:30.
  • Content involves working through an energy practice problem packet collaboratively in small groups or as a full class to reinforce homework concepts.