Pharmaceutical Dosages Forms Definitions and Manufacturing

Pharmaceutical Dosages Forms Definitions and Manufacturing

Dosage Forms

  • Tablets
  • Capsules
  • Syrups – Suspensions
  • Creams - Lotions
  • Ointments - Gel
  • Injections
  • Solutions

Water

  • Importance: Water is the most commonly used vehicle for drug solutions.

  • Types of Water Recognized by USP:
    a. Purified Water USP:

    • Obtained by distillation, ion exchange, or reverse osmosis.
    • pH between 5 and 7.
    • Used in prescriptions and manufactured products, except parenteral and ophthalmic products.

    b. Water for Injection USP:

    • Obtained by distillation or reverse osmosis, meets purified water standards but is pyrogen-free.
    • Used as a solvent for parenteral solutions.

    c. Sterile Water for Injection USP:

    • Sterilized water packaged in single-dose containers of type I and II glass, not exceeding 1 L capacity.
    • Limitations for total solids depend on the container size.

    d. Bacteriostatic Water for Injection USP:

    • Sterile water with antimicrobial agents, packaged in 30 mL containers.

    e. Sterile Water for Inhalation USP:

    • Purified, sterile water without antimicrobial agents; not for parenteral use.

    f. Sterile Water for Irrigation USP:

    • Sterilized water without additives, for irrigation.

    g. Sterile Purified Water USP:

    • Purified and sterilized water; no antimicrobial agents, not for parenteral use.

Oral Liquids (Syrups, Solutions, Suspensions)

  • Definition: Liquid preparations intended for oral use with one or more active ingredients.
  • Advantages:
    • Easy to swallow
    • Rapid absorption
    • Flexible dosing
  • Disadvantages:
    • Less stable than solids
    • Bulkier and harder to transport
    • Risk of dosing errors
  • How to Make:
    • Dissolve active ingredients in water or solvent
    • Add preservatives, sweeteners, flavors
    • Fill and bottle

Syrups

  • Definition: Oral solutions with high sugar concentrations.
  • Syrup NF: Concentrated or nearly saturated aqueous solution of sugar (85%; 65% w/w).
  • Solubility Consideration: Low capacity for water-soluble drugs; difficult to dissolve in syrup due to strong hydrogen bonding between sucrose and water. Best practice: dissolve drug in a small amount of water and then add syrup.
  • Microbial Growth Control:
    • The sucrose concentration controls microbial growth—saturated syrup is undesirable due to crystallization risks.
    • Syrup NF tends to be self-preserved (no preservative needed).

Elixirs

  • Definition: Solutions containing alcohol as a cosolvent (alcohol content varies from 5% to 40%).
  • Considerations:
    • Elixirs are not preferred for salts due to taste enhancement and low solubility in alcohol; alcoholic content must remain low.
    • Aromatic elixir NF contains about 22% alcohol.
    • Iso-alcoholic elixir: A combination of low-alcohol (8%-10%) and high-alcohol (73%-78%) elixirs allows for enough alcohol to dissolve drugs effectively.

Suspensions

  • Definition: Heterogeneous liquid dosage form with insoluble solid particles dispersed uniformly in a liquid medium.
  • Types of Suspensions:
    1. Based on Route of Administration:
    • Oral suspension (e.g., paracetamol suspension)
    • Topical suspension (e.g., calamine lotion)
    • Ophthalmic suspension (e.g., corticosteroid suspensions)
    • Parenteral suspension (e.g., long-acting penicillin)
    1. Based on Dosage Characteristics:
    • Ready-to-use
    • Dry powders for reconstitution
    1. Based on Particle Size:
    • Colloidal suspension
    • Coarse suspension
  • Advantages:
    • Suitable for poorly water-soluble drugs
    • Easy for pediatric and geriatric patients
    • Improved stability for certain drugs
    • Controlled release of active ingredients
    • Flexible dosing
  • Disadvantages:
    • Physical instability (sedimentation, caking)
    • Requires shaking before use
    • Unpleasant taste or texture
    • Difficult to formulate uniformly
    • Contamination risks

How to Make a Pharmaceutical Suspension

  • Ingredients Needed:
    • Active Pharmaceutical Ingredient (API): Insoluble drug
    • Suspending Agents: (e.g., xanthan gum, methylcellulose)
    • Wetting Agents: (e.g., polysorbate 80)
    • Preservatives: (e.g., parabens)
    • Flavors & Sweeteners: For palatability
    • Vehicle: Usually purified water
  • General Steps:
    1. Powder Preparation: Weigh and sift API.
    2. Wetting the Drug: Mix with a wetting agent.
    3. Prepare the Vehicle: Dissolve suspending agents and preservative in water.
    4. Mix the Drug into the Vehicle: Stir the wetted drug into the vehicle.
    5. Homogenization: Use a homogenizer for uniformity.
    6. Final Volume Adjustment: Add vehicle to reach the desired volume.
    7. Packaging: Fill into appropriate containers; label accordingly.

Tablets

  • Definition: Solid dosage forms containing medicinal substances, compressed into a defined shape.
  • Advantages:
    • Convenient and portable
    • Accurate dosage
    • Long shelf life
    • Low manufacturing cost
  • Disadvantages:
    • Not suitable for drugs degrading in the GI tract
    • Difficulty in swallowing for some patients
    • Slower onset of action versus liquids or injections
  • Manufacturing Steps:
    1. Weigh and blend active ingredients and excipients.
    2. Granulation (wet or dry) to form granules.
    3. Dry the granules.
    4. Lubricate and compress into tablets.
    5. Optionally coat the tablets.

Types of Excipients in Tablets

  • Excipients are inactive substances aiding in processing and stability of tablets.

  • Types:

    1. Diluents (Fillers):
    • Increase the tablet's bulk.
    • Examples: Lactose, microcrystalline cellulose, dibasic calcium phosphate, mannitol.
    1. Binders:
    • Promote adhesion during granulation.
    • Examples: Starch paste, povidone, hydroxypropyl methylcellulose (HPMC), gelatin.
    1. Disintegrants:
    • Help the tablet break apart in the digestive tract.
    • Examples: Sodium starch glycolate, croscarmellose sodium, starch.
    1. Lubricants:
    • Reduce friction during compression and ejection.
    • Examples: Magnesium stearate, stearic acid, talc.
    1. Glidants:
    • Improve powder flowability.
    • Examples: Colloidal silicon dioxide, talc.
    1. Coloring Agents:
    • Improve tablet appearance or identification.
    • Examples: FD&C dyes, iron oxides.
    1. Flavoring & Sweetening Agents:
    • Enhance taste, especially for chewable tablets.
    • Examples: Aspartame, sucralose, menthol.
    1. Coating Agents:
    • Protect tablets, mask taste, or control release.
    • Examples: HPMC, shellac, polyvinyl alcohol.

Granulation

  • Definition: A critical manufacturing step improving flow, compressibility, and uniformity of the powder mix.
  • Types of Granulation:
    1. Wet Granulation: Common method involving the mixing of powders with a binder solution. Steps include mixing, massing, drying, and compressing.
    2. Dry Granulation: Used for moisture-sensitive APIs. Steps include slugging or compaction, milling, and compression.
    3. Direct Compression: Skips granulation using directly compressible excipients ensuring uniform filling and strength.

Why Granulate?

  • To prevent segregation of ingredients.
  • To improve flow properties.
  • To enhance tablet hardness.
  • To reduce dust generation.
  • To increase content uniformity.

Capsules

  • Definition: Solid dosage forms in which the drug is enclosed in a gelatin shell.
  • Advantages:
    • Masks unpleasant taste/odor
    • Easier to swallow than tablets
    • Can hold liquids (soft capsules)
  • Disadvantages:
    • Sensitive to humidity
    • Not suitable for vegetarians
    • Higher cost than tablets
  • Manufacturing Process:
    1. Fill hard gelatin shells with powders or granules.
    2. Seal the capsules.
    3. Polish and package.

Types of Capsules

  • Hard Gelatin Capsules (Two-piece):

    • Composed of a body and a cap; filled with powders or granules.
    • Manufacturing Steps include:
    1. Preparation of gelatin solution
    2. Dip-coating of molds
    3. Drying
    4. Stripping and trimming
    5. Joining and sorting
    6. Filling (separate operation).
  • Soft Gelatin Capsules (One-piece):

    • Hermetically sealed, filled with liquids or semi-solids.
    • Manufacturing Steps:
    1. Prepare gelatin mass
    2. Prepare fill material
    3. Encapsulation
    4. Drying
    5. Sorting and packaging.

Injectables (Parenteral)

  • Definition: Sterile preparations meant for administration via injection.
  • Advantages:
    • Rapid onset of action
    • Useful for patients unable to take oral medications
    • 100% bioavailability
  • Disadvantages:
    • Requires trained personnel
    • Risk of infection
    • Higher manufacturing costs
  • Manufacturing Process includes:
    1. Dissolve drug in sterile solvent.
    2. Filter through sterilizing filters.
    3. Fill into sterile containers under aseptic conditions.
    4. Seal and sterilize.

Key Considerations for Parenteral Manufacturing

  • Follow Good Manufacturing Practices (GMP).
  • Operate in cleanrooms with controlled levels of particulates and microbes.
  • Conduct in-process and final sterility tests.
  • Test for pyrogens/endotoxins (LAL test).

Topical Dosage Forms (Creams, Ointments, Gels)

  • Definition: Semisolid preparations applied to the skin for localized or systemic effects.
  • Advantages:
    • Localized effect; fewer side effects
    • Easy to apply
    • Avoids first-pass metabolism
  • Disadvantages:
    • Possible irritation
    • Poor absorption for some drugs
    • Shorter shelf life
  • Manufacturing Process:
    1. Melt oil and water phases separately.
    2. Mix phases under agitation (emulsification).

Creams

  • Definition: Semi-solid emulsions composed of oil and water.
  • Types:
    • Oil-in-Water (O/W): Less greasy and can be washed off easily.
    • Water-in-Oil (W/O): More moisturizing with an oily barrier.

Ointments

  • Definition: Semi-solid preparations with a high oil content, for therapeutic delivery or protective barrier.
  • Types of Bases:
    • Hydrocarbon (Greasy, water-insoluble)
    • Absorption bases
    • Water-removable bases
    • Water-soluble bases

Emulsions

  • Definition: Biphasic liquid dosage forms of two immiscible liquids, stabilized by emulsifying agents.
  • Types:
    • O/W and W/O emulsions; Multiple emulsions for controlled drug release.
  • Emulsifying Agents:
    1. Natural Agents: e.g., acacia, tragacanth.
    2. Synthetic Agents:
    • Anionic (e.g., sodium lauryl sulfate)
    • Cationic (e.g., benzalkonium chloride)
    • Nonionic (e.g., polysorbates)
  • Function: Reduces interfacial tension, stabilizes the emulsion.

Gel

  • Definition: Semi-solid systems with liquid phase constrained within a polymeric matrix.
  • Types:
    • Hydrogels: Water-based
    • Oleo Gels: Oil-based
  • Characteristics: Non-greasy, easily absorbed, suitable for oily skin conditions.

Suppositories

  • Definition: Solid dosage forms inserted into body cavities where they melt or dissolve.
  • Advantages:
    • For patients unable to swallow
    • Avoids first-pass metabolism
  • Disadvantages:
    • Can be uncomfortable
    • Requires cool storage
  • Manufacturing Methods:
    1. Molding (fusion) method
    2. Compression (cold compression) method
    3. Hand rolling and shaping method (rarely used).

General Process of Manufacturing Suppositories

  • Steps include selection of suitable bases, incorporation of drug, and quality checks.