Action Potential Review
Resting Membrane Potential
- Resting Voltage Level: The resting membrane potential of a neuron is maintained at approximately −70mV. At this baseline state, the inside of the cell membrane is negatively charged relative to the positively charged extracellular fluid outside.
- Ion Distribution at Rest:
- Extracellular Fluid (Outside): High concentration of sodium ions (Na+) and chloride ions (Cl−).
- Intracellular Fluid (Inside): High concentration of potassium ions (K+) alongside large, negatively charged non-diffusible protein anions.
- Mechanisms Maintaining Resting Potential:
- Active Transport via Sodium-Potassium Pump (Na+/K+ ATPase): Active transport pumps utilize cellular energy (ATP) to move 3Na+ ions outward from the inside of the cell to the outside, while simultaneously pumping 2K+ ions inward from the outside to the inside. This unequal exchange (3Na+ out for every 2K+ in) continuously removes more positive charges from the cell than it brings in.
- Differential Passive Permeability (Leak Channels): Non-gated membrane leak channels allow passive diffusion down concentration gradients. The neuronal membrane exhibits a significantly higher leak permeability for K+ than for Na+. As a result, K+ diffuses out of the neuron faster than Na+ diffuses in, generating a net loss of positive charge internally.
- Fixed Intracellular Anions: Large, negatively charged protein molecules inside the cytoplasm cannot pass through the plasma membrane, maintaining an intrinsic internal negative voltage.
Action Potential Dynamics and Phases
Threshold and All-or-Nothing Response
- Threshold Potential: The threshold potential required to trigger an action potential is −55mV.
- All-or-Nothing Principle: Depolarization must reach or surpass −55mV to initiate an action potential. If an incoming stimulus fails to bring the membrane potential to −55mV, no action potential occurs. If threshold is reached, a complete, full-amplitude action potential is generated automatically.
Depolarization Phase
- Activation of Sodium Gates: When a threshold stimulus (−55mV) is achieved, voltage-gated Na+ channels open rapidly.
- Sodium Influx: Positively charged sodium ions (Na+) enter the axon down both their concentration gradient and electrical gradient.
- Reversal of Charge: The inward influx of Na+ causes the internal environment of the cell to become increasingly positive relative to the outside.
- Peak Voltage: The membrane potential rapidly rises from −55mV to a peak voltage of +40mV (or up to +45mV in localized measurements). At this peak, the inside of the membrane is positively charged (+40mV) and the outside is negatively charged.
Repolarization Phase
- Channel State Changes at Peak Potential: Upon reaching +40mV, the voltage-gated Na+ channels close and enter an inactive state, terminating further Na+ entry. Simultaneously, voltage-gated K+ channels open.
- Potassium Efflux: Positively charged potassium ions (K+) rapidly exit the cell through the open K+ gated channels, moving down their concentration and electrical gradients.
- Restoration of Negative Internal Charge: The outward loss of positively charged K+ causes the interior of the cell to become progressively more negative again while the exterior becomes more positive, returning the membrane potential back down toward negative values.
- Temporary Inverted Ion Position: At the end of repolarization, the negative voltage is restored, but the primary ions are located on opposite sides of the membrane compared to their resting state (Na+ is currently inside, and K+ is currently outside).
Hyperpolarization and Refractory Period
- Mechanism of Hyperpolarization: The voltage-gated K+ channels open during repolarization close slowly. Because they stay open longer than necessary, excess K+ leaves the cell beyond the amount required to reach the resting potential.
- Hyperpolarization Voltage Drop: The temporary excess outflow of K+ causes the membrane potential to drop below the normal resting potential down to −80mV (or −75mV to −80mV).
- Refractory Period (Cool-Down Phase):
- Directly following repolarization and during hyperpolarization, the neuron enters a refractory period.
- During the inactivation phase of the voltage-gated Na+ channels, the sodium gates remain shut and locked. No amount of voltage or incoming stimulus can force them to reopen during this period.
- Restoration to Resting State:
- During and after the refractory period, active Na+/K+ pumps actively reorganize the ions.
- The pump transports Na+ back to the outside of the cell and K+ back to the inside.
- This restores both the original chemical ion distribution (Na+ outside, K+ inside) and the baseline resting membrane potential of −70mV.
Action Potential Propagation and Axonal Conduction
Unidirectional Travel and Local Current Flow
- Attraction of Opposite Charges:
- During depolarization, a localized region inside the axon becomes positively charged (+40mV) due to incoming Na+.
- Inside the axon, these positive ions are electrostatically attracted to adjacent, negatively charged internal regions that remain at resting potential (−70mV).
- This movement of positive charge along the inner membrane depolarizes the adjacent resting region to its threshold potential (−55mV), opening its voltage-gated Na+ channels and propagating the action potential forward.
- Mechanism of One-Way Propagation:
- An action potential moves in only one direction down the axon (from the cell body toward the axon terminal).
- The section of the axon immediately upstream (behind the moving action potential) is in its refractory period, with its Na+ channels in an inactivated state.
- Because the upstream Na+ channels cannot reopen, local current flow cannot trigger a reverse action potential, ensuring strictly unidirectional propagation.
Saltatory Conduction and Myelination
- Myelin Sheath Function: Myelin acts as an electrical insulator wrapped around the axon of myelinated neurons, preventing ionic exchange across the insulated sections of the lipid membrane.
- Nodes of Ranvier: Uninsulated gaps along the myelinated axon where voltage-gated Na+ and K+ channels are heavily concentrated.
- Saltatory Mechanism:
- Because myelin insulates the inter-node segments, ionic currents cannot pass through the myelin sheath.
- Instead, the action potential "jumps" from one Node of Ranvier to the next (termed saltatory conduction).
- Conduction Velocity Advantage: Saltatory conduction along myelinated neurons significantly speeds up nerve impulse transmission compared to unmyelinated axons, where the impulse must travel continuously down every point of the membrane in a slower wave-like fashion.
Intensity and Frequency of Neural Stimuli
- Constancy of Action Potential Magnitude: Every individual action potential generated by a neuron has the same peak amplitude (+40mV) due to the all-or-nothing law.
- Encoding Stimulus Strength: The brain differentiates between weak and strong stimuli based on two variables:
- Firing Frequency: A stronger stimulus causes action potentials to fire at a higher frequency (more action potentials per second).
- Neuron Recruitment: A stronger stimulus activates and affects a greater total number of individual neurons simultaneously.