Physical Quantities and Measurement Techniques

Units and Basic Quantities

  • A standard or unit must necessarily be selected before any measurement is conducted.

  • The magnitude of a physical quantity is determined using a measurement instrument equipped with a scale calibrated in a specific unit.

  • Physics recognizes three fundamental basic quantities:

    • Length

    • Mass

    • Time

  • Units for all other derivative physical quantities are constructed from these three basic quantities: length, mass, and time.

  • The SI (Système International d’Unités) is a standardized set of units adopted globally for scientific consistency.

Measurement of Length

  • The base unit of length is the metre (m\text{m}).

  • Sub-multiples of the metre are used for smaller distances:

    • 1 decimetre (dm\text{dm}) = 10−1 m10^{-1}\,\text{m}

    • 1 centimetre (cm\text{cm}) = 10−2 m10^{-2}\,\text{m}

    • 1 millimetre (mm\text{mm}) = 10−3 m10^{-3}\,\text{m}

    • 1 micrometre (μm\mu\text{m}) = 10−6 m10^{-6}\,\text{m}

    • 1 nanometre (nm\text{nm}) = 10−9 m10^{-9}\,\text{m}

  • Multiples of the metre are used for larger distances:

    • 1 kilometre (km\text{km}) = 103 m10^{3}\,\text{m}

    • 1 gigametre (Gm\text{Gm}) = 109 m10^{9}\,\text{m}

  • Length measurements are frequently performed using rulers or metre rules.

  • For measurements of any length less than one metre, a metre rule is specifically employed.

  • To ensure accuracy in measurements, it is essential to take ±\pm readings.

Area and Volume

  • Area:

    • Definition: The area of a square with side lengths of 1 cm1\,\text{cm} is defined as one square centimetre (1 cm21\,\text{cm}^2).

    • General formula for area is: area=length×breadth\text{area} = \text{length} \times \text{breadth}.

    • The SI unit for area is the square metre (m2\text{m}^2), which represents the area of a square with side lengths of 1 m1\,\text{m}.

  • Volume:

    • Definition: Volume represents the specific amount of three-dimensional space occupied by an object.

    • The SI unit of volume is the cubic metre (m3\text{m}^3).

    • A commonly utilized unit in laboratory settings for volume is the cubic centimetre (cm3\text{cm}^3).

    • The volume formula for a cylinder is: V=π×r2×hV = \pi \times r^2 \times h.

    • Liquid volumes are measured using a measuring cylinder. For accurate readings:

      • The cylinder must be placed on an upright, level surface.

      • The observer's eye must be positioned at the same horizontal level as the bottom of the meniscus.

Measurement of Time

  • The standard unit of time is the second (s\text{s}).

  • Devices used for measuring time operate based on oscillations.

  • The choice of a timer must depend on the precision required for the specific task:

    • A stopwatch is appropriate for measuring the period of a pendulum.

    • A millisecond timer is required for tasks such as measuring the speed of sound.

Scalars and Vectors

  • Scalar Quantity: A physical quantity that possesses magnitude (size) only.

    • Examples include: distance, speed, time, mass, pressure, energy, and temperature.

  • Vector Quantity: A physical quantity that is defined by both a magnitude and a specific direction.

    • Examples include: force, gravitational field strength, electric field strength, weight, velocity, acceleration, and momentum.

  • Representation: Vectors are represented visually by a straight line. The length of the line corresponds to the magnitude, and an arrow head indicates the direction.

  • Addition of Quantities:

    • Scalars can be added using ordinary arithmetic rules.

    • Vectors must be added geometrically, as the calculation must account for both magnitude and direction.

Vector Addition and Calculation

  • For two vectors, FXF_X and FYF_Y, that are positioned at right angles (perpendicular) to each other, the magnitude of the resultant vector FF is calculated via the Pythagorean theorem:

    • F=FX2+FY2F = \sqrt{F_X^2 + F_Y^2}

  • The angle θ\theta between the vector FXF_X and the resultant vector FF is determined using trigonometry:

    • tan⁡(θ)=FYFX\tan(\theta) = \frac{F_Y}{F_X}

  • Numerical Example:

    • Given two distance vectors: d1=50 md_1 = 50\,\text{m} (horizontal) and d2=20 md_2 = 20\,\text{m} (vertical).

    • The tangent of the angle θ\theta is: tan⁡(θ)=20 m50 m=0.4\tan(\theta) = \frac{20\,\text{m}}{50\,\text{m}} = 0.4

    • The angle θ\theta is calculated as: θ=tan⁡−1(0.4)=22∘\theta = \tan^{-1}(0.4) = 22^{\circ}