CHP-6 -LEC Notes

Electrical Signaling in Neurons

I. Membrane Potentials

A. Resting Membrane Potentials (RMPs)
  • Definition: The electrical potential difference (voltage) across the membrane of a cell when it is at rest.
    • Typical values:
    • Animal cells: approximately −60-60 to −70-70 mV
    • Plant cells: up to −300-300 mV
B. Measurement of RMP
  1. Using Microelectrodes:

    • Equipment Needed:
      • A microelectrode placed in the cytoplasm
      • A reference electrode (ground) in the bathing medium
      • A voltmeter to record the potential difference
  2. Recording Technique:

    • An intracellular electrode (glass micropipette) containing an electrolyte solution (e.g., 3 M KCl) is used.
    • The bath electrode is typically a conductive metal (AgCl).
C. Current Clamp Technique
  • Used to inject current of specified amplitude (nA) into the cell to observe changes in the RMP.
    • Notable Effects:
    • Positive current leads to depolarization.
    • Negative current causes hyperpolarization.
    • These voltage changes are relative to the RMP.
D. Establishing the RMP
  1. Ionic Movement:

    • The resting membrane potential is primarily established by the movement of K+K^+ ions through leakage channels in the cell membrane.
    • Potassium (K+) is continually leaking out of the cell down its concentration gradient.
  2. Charge Separation:

    • Anions (A-) stay inside the cell due to their larger size, attracting cations (K+) to the outside, leading to charge separation across the membrane.
  3. Equilibrium Potential (E):

    • The equilibrium potential for K+ is the voltage where the outward flow of K+ is exactly balanced by the charge repulsion from the buildup of positive charges outside the membrane.
E. Comparison of Ion Concentrations in Mammals and Squid
  • Mammalian Neurons:

    • K+: 140140 mM (inside) vs. 55 mM (outside)
    • Na+: 55 mM (inside) vs. 145145 mM (outside)
    • Cl−: 2020 mM (inside) vs. 110110 mM (outside)
  • Squid Neurons:

    • K+: 400400 mM (inside) vs. 2020 mM (outside)
    • Na+: 5050 mM (inside) vs. 440440 mM (outside)
    • Cl−: 40−15040−150 mM (inside) vs. 560560 mM (outside)
F. Nernst Equation
  1. Equation:
    E<em>x=RTzFln⁡([X]</em>outside[X]inside)E<em>x = \frac{RT}{zF} \ln \left( \frac{[X]</em>{outside}}{[X]_{inside}} \right)

    • Where:
      • RR = gas constant (1.987 cal/mol·K)
      • TT = temperature in Kelvin
      • zz = ion valence
      • FF = Faraday constant (23,062 cal/V-mol)
      • [X][X] = molar concentration of ion
  2. Example Calculation for Squid Giant Axon:

    • For K+ at 2020 °C:
      • K<em>inside=400K<em>{inside} = 400 mM, K</em>outside=20K</em>{outside} = 20 mM
      • Plugging into the Nernst equation ultimately results in: −75.5mV-75.5 mV
G. Reasons for RMP Not Equal to EK
  1. Multiple Ion Leakage:
    • RMP differs from the equilibrium potential for K+ (E_K) because Na+ and Cl− ions also contribute to the overall membrane potential.
    • Goldman-Katz Equation shows how various contributions from different ions (K+, Na+, and Cl−) determine the overall RMP.
    • Ionic Permeability Preferences:
      • P<em>K>P</em>Cl>PNaP<em>K > P</em>Cl > P_{Na}
  2. Summation of Driving Forces:
    • The net flux of each ion is determined by the relative permeability of the membrane and the chemical/electrical driving forces on the ions.
H. Conclusion
  • The RMP of neurons is established primarily by the permeability of the membrane to K+, along with significant contributions from Na+ and Cl− ions, leading to complex interactions that define the cell's electrical signals.
    • Understanding these principles is crucial in cellular neurobiology and can provide insights into the mechanisms of excitable cells such as neurons and muscle cells.