Chapter Six: Polymers Study Notes

Chapter Six: Polymers

Introduction to Polymers

  • The chapter transitions from discussing solid-state chemistry, particularly ceramics, to polymers.

  • Emphasis on the classification of polymers, their properties, and applications in various fields.

Definition and Structure of Polymers

  • Polymer Definition: A polymer is a large macromolecule consisting of repeated structural units (monomers) bonded together by covalent bonds.

  • Monomers: Basic building block of polymers.

  • Polymerization: The process of linking monomers to form a polymer.

    • Reaction Type: Typically involves covalent bonding.

    • Example: Ethylene as a monomer polymerizes through a reaction to form polyethylene.

  • Degree of Polymerization (n): Refers to the number of repeating units in a polymer chain.

    • Definition: n=racMnM0n = rac{M_n}{M_0}

      • Where MnM_n is the average mass of the polymer and M0M_0 is the mass of the monomer.

    • The term average is used due to variability in chain length; polymer samples often contain a distribution of differing chain lengths.

  • Oligomers: Polymers with a degree of polymerization less than 100.

    • If n<100n < 100, referred to as oligomers.

    • If n>100n > 100, referred to as polymers.

Classification of Polymers

  1. Origin-based classification

    • Synthetic Polymers: Man-made polymers created through complex reactions, often from petroleum derivatives.

      • Examples: Polyethylene, PVC (polyvinyl chloride), polystyrene, nylon.

    • Biopolymers: Naturally occurring polymers derived from plants or animals, often involving chemical treatment.

      • Examples: Cellulose, starch, natural rubber, proteins (e.g. DNA).

  2. Structure-based classification

    • Linear Polymers: Monomers linked in straight chains without branches; tend to be more flexible and can pack closely (e.g. cellulose, nylon).

    • Branched Polymers: Have side chains, resulting in lower density and mechanical strength compared to linear polymers (e.g. low-density polyethylene).

    • Cross-linked Polymers: Feature branches that connect chains, forming a three-dimensional network structure (e.g. vulcanized rubber).

  3. Thermal behavior classification

    • Thermoplastic Polymers: Soften upon heating and harden upon cooling, allowing for reversible changes (e.g. polyethylene, PVC).

    • Thermosetting Polymers: Become hard and do not melt but may decompose upon heating. They are irreversibly hardened due to cross-links formed during curing (e.g. vulcanized rubber, epoxy resins).

  4. Monomer-based classification

    • Homopolymers: Consist of one type of monomer (e.g. polyethylene).

    • Copolymers: Composed of at least two different monomer types.

      • Types of Copolymers:

        • Alternating Copolymers: Monomers are arranged alternately.

        • Random Copolymers: Monomers are arranged randomly.

        • Block Copolymers: Consist of sequences or blocks of different monomers

        • Graft Copolymers: Feature a backbone of one type of monomer with branched side chains of another type.

Mechanisms of Polymerization

  • Types of Polymerization:

    • Addition Polymerization (Chain Growth Polymerization):

      • Characteristics:

        • Involves unsaturated monomers (e.g., alkenes).

        • Requires an initiator to begin the reaction.

        • Results in high molecular weight, fewer byproducts, and is a fast process following three main steps: initiation, propagation, and termination.

      • Example: Free radical polymerization of polyethylene using an initiator like peroxide.

    • Anionic Polymerization: Utilizes the reactive nature of anionic species for polymerization.

      • Example: Synthesizing polyethylene glycol from ethylene oxide via anionic ring-opening.

    • Cationic Polymerization: Involves Lewis acids as initiators; suitable for monomers that can become electrophiles.

      • Example: Synthesizing polystyrene through cationic polymerization using boron trifluoride.

    • Condensation Polymerization (Step Growth Polymerization):

      • Characterized by step-wise intermolecular reactions; functions by eliminating small molecules like water, and requires monomers to be bifunctional.

      • Example: Formation of nylon from diamine and dicarboxylic acid, where water is eliminated as a byproduct during the reaction.

Summary

  • The chapter covered various aspects of polymers, including their definitions, classifications based on origin, structure, and properties.

  • Emphasized the distinctions between synthetic and biopolymers, linear vs branched structures, and thermoplastic vs thermosetting characteristics.

  • Detailed the fundamental polymerization processes including addition (chain-growth) and condensation mechanisms, with examples illustrating each type.