Chapter 6: Chemical Equilibrium

Fundamentals of Dynamic Equilibrium

  • Definition of Dynamic Equilibrium: Chemical reactions reach a state of dynamic equilibrium when the rate of the forward reaction equals the rate of the reverse reaction (Rate of forward reaction=Rate of reverse reaction\text{Rate of forward reaction} = \text{Rate of reverse reaction}), resulting in no net change in the macroscopic composition of the system.

  • Vapor Pressure of Liquids:

    • When a beaker containing sufficient liquid water is placed in a sealed, closed container, water molecules continuously escape into the gas phase via vaporization while gaseous water molecules re-enter the liquid via condensation.
    • Dynamic equilibrium is established when the rate of vaporization equals the rate of condensation:     H2O(l)⇌H2O(g)H_2O(l) \rightleftharpoons H_2O(g)
    • The forward process represents vaporization:     H2O(l)→H2O(g)H_2O(l) \rightarrow H_2O(g)
    • The reverse process represents condensation:     H2O(g)→H2O(l)H_2O(g) \rightarrow H_2O(l)
    • Vapor pressure is defined as the pressure exerted by a vapor in dynamic equilibrium with its condensed (liquid) phase inside a closed container.
    • Vapor pressure depends only on temperature and is independent of the volume of the container or the surface area of the liquid.

Dynamic equilibrium established between liquid vaporization and condensation in a closed bell jar

  • Initial Conditions and Constancy of the Equilibrium State:
    • If a reaction mixture starts away from equilibrium or is displaced from it, the chemical composition changes spontaneously until equilibrium is re-established.
    • Different initial concentrations of reactants and products lead to different individual equilibrium concentrations.
    • For the gas-phase synthesis of methanol in a 1.0 L1.0\,\text{L} container (V=1 LV = 1\,\text{L}):     CO(g)+2H2(g)⇌CH3OH(g)CO(g) + 2H_2(g) \rightleftharpoons CH_3OH(g)
    • Regardless of the starting quantities of COCO, H2H_2, or CH3OHCH_3OH, the ratio of equilibrium molar concentrations at a constant temperature yields the identical numerical constant, termed the equilibrium constant (KcK_c):     [CH3OH]eq[CO]eq[H2]eq2=0.090.91×(0.82)2=0.220.78×(1.56)2=0.15=Kc\frac{[CH_3OH]_{eq}}{[CO]_{eq}[H_2]_{eq}^2} = \frac{0.09}{0.91 \times (0.82)^2} = \frac{0.22}{0.78 \times (1.56)^2} = 0.15 = K_c

Concentration vs time profiles showing different initial conditions reaching the same equilibrium state

The Equilibrium Constant Expression and Heterogeneous Equilibria

  • The Law of Mass Action and KcK_c:

    • Consider the generalized reversible chemical equation:     aA+bB+⋯⇌gG+hH+…aA + bB + \dots \rightleftharpoons gG + hH + \dots
    • Here, A,B,…A, B, \dots denote reactants with stoichiometric coefficients a,b,…a, b, \dots, and G,H,…G, H, \dots denote products with stoichiometric coefficients g,h,…g, h, \dots.
    • The equilibrium constant expression KcK_c provides a general description of the equilibrium state at a given temperature:     Kc=[G]g[H]h…[A]a[B]b…K_c = \frac{[G]^g[H]^h \dots}{[A]^a[B]^b \dots}
    • The square brackets denote molarity (mol/L\text{mol/L}) of each component at chemical equilibrium.
    • Equilibrium molar concentrations in the KcK_c expression are written as dimensionless ratios relative to a standard state of 1 M1\,\text{M}; consequently, KcK_c is strictly unitless.
  • Worked Example 6-1 (Calculating Equilibrium Concentration):

    • Reaction: H2(g)+I2(g)⇌2HI(g)H_2(g) + I_2(g) \rightleftharpoons 2HI(g) with Kc=92.0K_c = 92.0.
    • Given equilibrium concentrations: [HI]=0.115 M[HI] = 0.115\,\text{M} and [I2]=0.250 M[I_2] = 0.250\,\text{M}.
    • Determine the equilibrium concentration of [H2][H_2]:     Kc=[HI]2[H2][I2]K_c = \frac{[HI]^2}{[H_2][I_2]}92.0=(0.115)2[H2](0.250)92.0 = \frac{(0.115)^2}{[H_2](0.250)}[H2]=(0.115)292.0×0.250=0.01322523.0=5.75×10−4 M[H_2] = \frac{(0.115)^2}{92.0 \times 0.250} = \frac{0.013225}{23.0} = 5.75 \times 10^{-4}\,\text{M}
  • Equilibria Involving Gases (KpK_p) and the Relationship Between KpK_p and KcK_c:

    • For gas-phase equilibria, the equilibrium constant can be expressed in terms of equilibrium partial pressures (in atmospheres, atm\text{atm}):     Kp=PGgPHh…PAaPBb…K_p = \frac{P_G^g P_H^h \dots}{P_A^a P_B^b \dots}
    • The mathematical relationship between KpK_p and KcK_c is:     Kp=Kc(RT)ΔngasK_p = K_c(RT)^{\Delta n_{gas}}
    • Here, Δngas\Delta n_{gas} is the change in the number of moles of gas:     Δngas=(g+h+… )−(a+b+… )\Delta n_{gas} = (g + h + \dots) - (a + b + \dots)
    • Derivation from the Ideal Gas Law (PJV=nJRT  ⟹  [J]=nJV=PJRTP_J V = n_J R T \implies [J] = \frac{n_J}{V} = \frac{P_J}{RT}):     Kc=(PGRT)g(PHRT)h…(PART)a(PBRT)b…=PGgPHh…PAaPBb…(RT)(a+b+… )−(g+h+… )=Kp(RT)−ΔngasK_c = \frac{\left(\frac{P_G}{RT}\right)^g \left(\frac{P_H}{RT}\right)^h \dots}{\left(\frac{P_A}{RT}\right)^a \left(\frac{P_B}{RT}\right)^b \dots} = \frac{P_G^g P_H^h \dots}{P_A^a P_B^b \dots} (RT)^{(a+b+\dots)-(g+h+\dots)} = K_p (RT)^{-\Delta n_{gas}}Kp=Kc(RT)ΔngasK_p = K_c(RT)^{\Delta n_{gas}}
  • Worked Example 6-2 (KpK_p to KcK_c Conversion):

    • Reaction: 2Cl2(g)+2H2O(g)⇌4HCl(g)+O2(g)2Cl_2(g) + 2H_2O(g) \rightleftharpoons 4HCl(g) + O_2(g).
    • Given: Kp=4.6×10−14K_p = 4.6 \times 10^{-14} at 25 ∘C25\,^{\circ}\text{C} (T=298.15 KT = 298.15\,\text{K}).
    • Calculate Δngas\Delta n_{gas}:     Δngas=(4+1)−(2+2)=5−4=1\Delta n_{gas} = (4 + 1) - (2 + 2) = 5 - 4 = 1
    • Calculate KcK_c using R=0.08206 L⋅atm⋅mol−1⋅K−1R = 0.08206\,\text{L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}:     Kp=Kc(RT)1  ⟹  Kc=KpRTK_p = K_c(RT)^1 \implies K_c = \frac{K_p}{RT}Kc=4.6×10−140.08206×298.15=4.6×10−1424.466=1.9×10−15K_c = \frac{4.6 \times 10^{-14}}{0.08206 \times 298.15} = \frac{4.6 \times 10^{-14}}{24.466} = 1.9 \times 10^{-15}
  • Heterogeneous Equilibria:

    • A heterogeneous equilibrium involves reactants and products present in more than one phase.
    • The position of a heterogeneous equilibrium does not depend on the absolute amounts of pure solids ((s)(s)) or pure liquids ((l)(l)) present because their concentrations (densities divided by molar masses) are constant.
    • Pure solids ((s)(s)) and pure liquids ((l)(l)) are completely omitted from equilibrium constant expressions (KcK_c and KpK_p).
    • For the thermal decomposition of calcium carbonate (limestone/marble) to calcium oxide (lime):     CaCO3(s)⇌CaO(s)+CO2(g)CaCO_3(s) \rightleftharpoons CaO(s) + CO_2(g)Kc=[CO2]K_c = [CO_2]Kp=PCO2=Kc(RT)1K_p = P_{CO_2} = K_c(RT)^1

Heterogeneous equilibrium showing constant CO2 vapor pressure over varying solid amounts of CaCO3 and CaO

Manipulating Equilibrium Constants and Reaction Quotient

  • Rules for Manipulating Equilibrium Constant Expressions:

    • Inversion Rule (Reversing a Reaction): Reversing a chemical equation causes the inversion of its equilibrium constant:     gG+hH+⋯⇌aA+bB+⋯  ⟹  Kc′=1KcgG + hH + \dots \rightleftharpoons aA + bB + \dots \implies K_c' = \frac{1}{K_c}
    • Power Rule (Multiplying by a Factor): Multiplying stoichiometric coefficients by a common factor xx raises the equilibrium constant to the power of xx:     xaA+xbB+⋯⇌xgG+xhH+⋯  ⟹  Kc′=Kcxx aA + x bB + \dots \rightleftharpoons x gG + x hH + \dots \implies K_c' = K_c^x
    • If coefficients are doubled (x=2x = 2): Kc′=Kc2K_c' = K_c^2
    • If coefficients are halved (x=1/2x = 1/2): Kc′=KcK_c' = \sqrt{K_c}
    • Multiplication Rule (Adding Reactions): When individual chemical equations are added together, their equilibrium constants are multiplied to obtain the overall equilibrium constant:     Step 1: aA⇌cC(K1)\text{Step 1: } aA \rightleftharpoons cC \quad (K_1)Step 2: cC⇌dD(K2)\text{Step 2: } cC \rightleftharpoons dD \quad (K_2)Step 3: dD⇌bB(K3)\text{Step 3: } dD \rightleftharpoons bB \quad (K_3)Overall: aA⇌bB(Kc)\text{Overall: } aA \rightleftharpoons bB \quad (K_c)Kc=[B]b[A]a=[C]c[A]a×[D]d[C]c×[B]b[D]d=K1⋅K2⋅K3K_c = \frac{[B]^b}{[A]^a} = \frac{[C]^c}{[A]^a} \times \frac{[D]^d}{[C]^c} \times \frac{[B]^b}{[D]^d} = K_1 \cdot K_2 \cdot K_3
  • The Reaction Quotient (QQ) and Predicting the Direction of Net Change:

    • For any mixture of reactants and products, the reaction quotient (QcQ_c) is calculated using the same mathematical expression as KcK_c, but using initial or non-equilibrium concentrations ([A]0,[B]0,…[A]_0, [B]_0, \dots):     Qc=[G]0g[H]0h…[A]0a[B]0b…Q_c = \frac{[G]_0^g [H]_0^h \dots}{[A]_0^a [B]_0^b \dots}
    • Comparing QcQ_c to KcK_c indicates the direction of net change required to achieve equilibrium:
    • If Qc<KcQ_c < K_c: The ratio of products to reactants is too small (reactant concentrations are too high). The net reaction proceeds to the right (forward direction) to generate more products.
    • If Qc>KcQ_c > K_c: The ratio of products to reactants is too large (product concentrations are too high). The net reaction proceeds to the left (reverse direction) to generate more reactants.
    • If Qc=KcQ_c = K_c: The system is at dynamic equilibrium. No net change in composition will occur.

Comparison of reaction quotient Q and equilibrium constant K showing directional shifts

Le Châtelier's Principle and System Perturbations

  • Core Principle: When an equilibrium system is subjected to a disturbance or change in temperature, pressure, or concentration of a reacting species, the system responds by attaining a new equilibrium that partially offsets the impact of the change.

Flowchart outlining the systematic application of Le Chatelier principle

  • Effect of Concentration Alterations:
    • Adding a reactant or removing a product decreases QQ below KK (Q<KQ < K), causing the system to shift forward (to the right).
    • Adding a product or removing a reactant increases QQ above KK (Q>KQ > K), causing the system to shift in reverse (to the left).
    • Example: In the Haber synthesis of ammonia at fixed volume:     N2(g)+3H2(g)⇌2NH3(g)N_2(g) + 3H_2(g) \rightleftharpoons 2NH_3(g)
    • Adding N2(g)N_2(g) to the equilibrium mixture increases reactant concentration, causing Q<KQ < K.
    • The net reaction shifts to the right, consuming added N2(g)N_2(g) and existing H2(g)H_2(g) to produce additional NH3(g)NH_3(g) until a new equilibrium is established where Q=KQ = K.

Equilibrium response to adding nitrogen gas in ammonia synthesis

  • Effect of Volume and Pressure Alterations:
    • Changing the volume of a gaseous equilibrium mixture alters partial pressures and concentrations simultaneously.
    • Volume Reduction (Pressure Increase): A net change occurs in the direction that produces fewer moles of gas to relieve pressure.
    • Volume Expansion (Pressure Decrease): A net change occurs in the direction that produces more moles of gas to restore pressure.
    • Application to the nitrogen dioxide / dinitrogen tetroxide system:     2NO2(g) (brown)⇌N2O4(g) (colorless)2NO_2(g) \text{ (brown)} \rightleftharpoons N_2O_4(g) \text{ (colorless)}
    • Reactants constitute 2 moles2\,\text{moles} of gas; products constitute 1 mole1\,\text{mole} of gas.
    • Compressing the gas mixture (V↓V \downarrow) shifts the equilibrium to the right toward colorless N2O4(g)N_2O_4(g).

Syringe experiment demonstrating volume reduction shifting NO2 to N2O4

  • Effect of Temperature Alterations:
    • Unlike concentration or volume changes, changing the temperature alters the numerical value of KK (QQ is unchanged at the instant temperature changes).
    • Raising Temperature (T↑T \uparrow): Shifts the equilibrium in the direction of the endothermic reaction (absorbing added thermal energy).
    • Lowering Temperature (T↓T \downarrow): Shifts the equilibrium in the direction of the exothermic reaction (releasing thermal energy).
    • For the dimerization of NO2NO_2:     2NO2(g) (brown)⇌N2O4(g) (colorless)+heat2NO_2(g) \text{ (brown)} \rightleftharpoons N_2O_4(g) \text{ (colorless)} + \text{heat}
    • The forward reaction is exothermic (ΔH<0\Delta H < 0); the reverse reaction is endothermic (ΔH>0\Delta H > 0).
    • Heating the system shifts equilibrium to the left, increasing [NO2][NO_2] and darkening the brown color (KK decreases).
    • Cooling the system in an ice bath shifts equilibrium to the right, increasing [N2O4][N_2O_4] and causing the mixture to turn pale/colorless (KK increases).

Equilibrium mixture of NO2 and N2O4 displaying color shifts at high and low temperatures

  • Effect of Catalysts:
    • A catalyst speeds up both the forward and reverse reactions by providing an alternate reaction pathway with a lower activation energy.
    • A catalyst has no effect on the equilibrium position, the equilibrium composition, or the numerical value of KK (Le Châtelier's principle does not apply).
    • A catalyst only accelerates the rate at which dynamic equilibrium is attained.
    • Industrial example: Solid vanadium(V) oxide (V2O5(s)V_2O_5(s)) serves as a catalyst for sulfur trioxide conversion:     SO3(g)+H2O(l)⇌H2SO4(aq)SO_3(g) + H_2O(l) \rightleftharpoons H_2SO_4(aq)

Catalyst surface interaction facilitating chemical reaction without altering equilibrium position

Equilibrium Calculations and ICE Tables

  • The ICE Table Method:
    • An ICE table is a systematic tabular framework to track changing quantities in reversible reactions:
    • I: Initial concentration or partial pressure.
    • C: Change in concentration or partial pressure required to reach equilibrium.
    • E: Equilibrium concentration or partial pressure (\text{Equilibrium} = \text{Initial} + \text{Change}$).\n * General Problem-Solving Flow:\n 1. Calculate Q to establish the direction of the net shift toward equilibrium.\n 2. Define variable x as the molar change of a key species.\n 3. Express all other species changes in terms of x multiplied by their stoichiometric coefficients.\n 4. Sum the initial and change rows to express equilibrium values in terms of x.\n 5. Substitute algebraic equilibrium expressions into the equilibrium constant expression (K_cororK_p)andsolvefor) and solve forx.\n 6. Substitute x back into the equilibrium expressions to calculate final numerical concentrations or pressures.\n\n* **Quadratic Equilibrium Expressions:**\n * For a generic reaction A(g) + B(g) \rightleftharpoons 2C(g)startingwithinitialconcentrationsstarting with initial concentrations[A]iandand[B]_i:\n * Initial: [A]_i,,[B]_i,,0\,\text{M}\n * Change: -x\,\text{M},,-x\,\text{M},,+2x\,\text{M}\n * Equilibrium: ([A]_i - x)\,\text{M},,([B]_i - x)\,\text{M},,2x\,\text{M}\n    K_c = \frac{[C]{eq}^2}{[A]{eq}[B]{eq}} = \frac{(2x)^2}{([A]i - x)([B]_i - x)}\n * Rearranging yields a standard quadratic equation:\n    ax^2 + bx + c = 0\n * Roots are evaluated via the quadratic formula:\n    x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}\n * *Physical Meaning Criterion:* Only one mathematical root yields physically permissible (positive) equilibrium concentrations; the non-physical root that yields negative concentrations or exceeds starting amounts must be discarded.\n\n* **Worked Example 6-4 (Comprehensive ICE Table Calculation):**\n * Reaction: PCl_3(g) + Cl_2(g) \rightleftharpoons PCl_5(g).\n * Given: At 500\,\text{K},,K_p = 2.01.A. A10.0\,\text{L}containerischargedwithcontainer is charged with2.00\,\text{mol}ofofPCl_3,,1.00\,\text{mol}ofofCl_2,and, and3.00\,\text{mol}ofofPCl_5.\n * Step 1: Convert K_ptotoK_catat500\,\text{K}:\n    \Delta n{gas} = 1 - (1 + 1) = -1\n    K_p = K_c(RT)^{-1} \implies K_c = K_p(RT)^1\n    K_c = 2.01 \times (0.08206 \times 500) = 2.01 \times 41.03 = 82.47\n * Step 2: Compute initial molarities in V = 10.0\,\text{L}:\n    [PCl_3]0 = \frac{2.00\,\text{mol}}{10.0\,\text{L}} = 0.200\,\text{M}\n    [Cl_2]_0 = \frac{1.00\,\text{mol}}{10.0\,\text{L}} = 0.100\,\text{M}\n    [PCl_5]_0 = \frac{3.00\,\text{mol}}{10.0\,\text{L}} = 0.300\,\text{M}\n * Step 3: Determine reaction direction using Q_c:\n    Q_c = \frac{[PCl_5]_0}{[PCl_3]_0[Cl_2]_0} = \frac{0.300}{0.200 \times 0.100} = 15.0\n    Since Q_c < K_c((15.0 < 82.47), the net reaction proceeds to the right (forward).\n * Step 4: Construct the ICE table:\n * Initial (\text{M}):):[PCl_3] = 0.200,,[Cl_2] = 0.100,,[PCl_5] = 0.300\n * Change (\text{M}):):[PCl_3] = -x,,[Cl_2] = -x,,[PCl_5] = +x\n * Equilibrium (\text{M}):):[PCl_3] = 0.200 - x,,[Cl_2] = 0.100 - x,,[PCl_5] = 0.300 + x\n * Step 5: Substitute into K_candsolveforand solve forx:\n    82.47 = \frac{0.300 + x}{(0.200 - x)(0.100 - x)} = \frac{0.300 + x}{x^2 - 0.300x + 0.0200}\n    82.47(x^2 - 0.300x + 0.0200) = 0.300 + x\n    82.47x^2 - 24.741x + 1.6494 = 0.300 + x\n    82.47x^2 - 25.741x + 1.3494 = 0\n    Apply quadratic formula (a = 82.47,,b = -25.741,,c = 1.3494):\n    x = \frac{25.741 \pm \sqrt{(-25.741)^2 - 4(82.47)(1.3494)}}{2(82.47)}\n    x = \frac{25.741 \pm \sqrt{662.599 - 445.138}}{164.94} = \frac{25.741 \pm \sqrt{217.461}}{164.94} = \frac{25.741 \pm 14.747}{164.94}\n    x_1 = \frac{40.488}{164.94} = 0.245\,\text{M} \quad (\text{impossible, exceeds } [Cl_2]_0 = 0.100\,\text{M})\n    x_2 = \frac{10.994}{164.94} = 0.0667\,\text{M}\n * Step 6: Final equilibrium concentrations:\n    [PCl_3]{eq} = 0.200 - 0.0667 = 0.133\,\text{M}\n    [Cl_2]{eq} = 0.100 - 0.0667 = 0.0333\,\text{M}\n    [PCl_5]{eq} = 0.300 + 0.0667 = 0.367\,\text{M}\n\n# Physical Properties of Gases and the Concept of Pressure\n\n* **Fundamental Properties of the Gaseous State:**\n * A gas is a state of matter in which constituent atoms or molecules are separated by distances significantly larger than their molecular dimensions and are free to move rapidly in all directions.\n * Gases expand spontaneously and uniformly to fill the entire volume of any container.\n * Gases diffuse readily into one another and form completely homogeneous mixtures in all proportions.\n * Macroscopic physical behavior of a gas is governed by four variables: Pressure (P),Volume(), Volume (V),Temperature(), Temperature (T),andAmountinmoles(), and Amount in moles (n).\n\n* **Mechanical Definition and SI Units of Pressure:**\n * Pressure is defined as the measure of force exerted per unit area:\n    \text{Pressure} = \frac{\text{Force}}{\text{Area}}\n * Force in SI units is measured in Newtons (\text{N}), derived from Newton's second law:\n    \text{Force (N)} = m\,(\text{kg}) \times a\,(\text{m/s}^2)\n    1\,\text{N} = 1\,\text{kg}\cdot\text{m/s}^2\n * 1\,\text{Newton}isapproximatelyequaltothedownwardgravitationalforceexertedonamassofis approximately equal to the downward gravitational force exerted on a mass of102\,\text{grams} (roughly half the mass of a typical apple):\n    1\,\text{N} \approx 0.102\,\text{kg} \times 9.81\,\text{m/s}^2\n * Pressure in SI units is the Pascal (\text{Pa}), defined as one Newton acting over an area of one square meter:\n    \text{Pressure (Pa)} = \frac{\text{Force (N)}}{\text{Area (m}^2\text{)}} = \frac{\text{Force (kg}\cdot\text{m/s}^2\text{)}}{\text{Area (m}^2\text{)}} = \text{kg}\cdot\text{m}^{-1}\cdot\text{s}^{-2}\n    1\,\text{Pa} = 1\,\text{N/m}^2\n\n* **Barometric Pressure and Pressure Conversions:**\n * Average atmospheric air pressure at sea level (standard barometric pressure) is:\n    P_{\text{bar}} = 1.01325 \times 10^5\,\text{Pa}\n * This atmospheric pressure corresponds to an equivalent air column mass of approximately 10,000\,\text{kg}restingoneverysquaremeter(resting on every square meter (1\,\text{m} \times 1\,\text{m}) of surface area at sea level.\n\n![Atmospheric column exerting sea level pressure equivalent to 10,000 kg mass per square meter](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/10.jpg)\n\n * Established Pressure Units and Definitions:\n * **Bar:** Exactly 10^5\,\text{Pa}:\n      1\,\text{bar} \equiv 10^5\,\text{Pa}\n * **Standard Atmosphere (atm):**\n      1\,\text{atm} \equiv 1.01325 \times 10^5\,\text{Pa} = 1.01325\,\text{bar}\n * **Millimeters of Mercury (mmHg) and Torr:**\n      1\,\text{atm} = 760\,\text{mmHg} = 760\,\text{Torr}\n * A millimeter of mercury (1\,\text{mmHg})isdefinedasthepressureexertedbyaverticalcolumnofliquidmercuryexactly) is defined as the pressure exerted by a vertical column of liquid mercury exactly1\,\text{mm}highathigh at0\,^{\circ}\text{C}.\n\n* **Liquid Column Hydrostatic Pressure:**\n * Gas pressures are often measured indirectly by balancing against a column of liquid.\n * Derivation of hydrostatic liquid pressure for a column of base area A,height, heighth,volume, volumeV,anddensity, and densityd:\n    P = \frac{F}{A} = \frac{m \cdot g}{A} = \frac{(V \cdot d) \cdot g}{A} = \frac{(A \cdot h \cdot d) \cdot g}{A} = d \cdot g \cdot h\n    P = dgh\n * Hydrostatic liquid pressure is directly proportional to the density of the liquid (d)andtheverticalheightoftheliquidcolumn() and the vertical height of the liquid column (h).\n\n* **Barometers and Manometers:**\n * *Mercury Barometer:* Constructed by inverting a mercury-filled glass tube into an open dish of mercury. Atmospheric pressure acting downward on the open pool balances the hydrostatic pressure of the internal mercury column, sustaining a column height of h = 760\,\text{mm} at sea level.\n\n![Mercury barometer balancing atmospheric pressure with a 760 mm column of liquid mercury](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/15.jpg)\n\n* *Open-End Manometer:* Measures enclosed gas pressure (P_{\text{gas}})relativetoambientbarometricpressure() relative to ambient barometric pressure (P_{\text{bar}}).Thedifferenceinliquidlevelheightbetweenthetwoarms(). The difference in liquid level height between the two arms (\Delta P = dgh) represents the net pressure differential:\n  \Delta P = |P_{\text{gas}} - P_{\text{bar}}|\n\n![Open-end U-tube manometer measuring differential pressure between a gas flask and atmospheric pressure](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/16.jpg)\n\n# The Gas Laws and the Ideal Gas Equation\n\n* **The Ideal Gas Equation:**\n * Relates pressure (P),volume(), volume (V),molarquantity(), molar quantity (n),andabsolutetemperature(), and absolute temperature (T) for an ideal gas:\n    PV = nRT\n * Absolute temperature scale conversion:\n    T\,(\text{K}) = T\,(^{\circ}\text{C}) + 273.15\n * Numerical values and units of the universal gas constant (R = \frac{PV}{nT}):\n * R = 0.08206\,\text{L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}\n * R = 0.08314\,\text{L}\cdot\text{bar}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}\n * R = 8.314\,\text{J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} = 8.314\,\text{kg}\cdot\text{m}^2\cdot\text{s}^{-2}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}\n\n* **The General Gas Equation (Two-State Comparisons):**\n * When a fixed gas sample undergoes a transition between an initial state (i)andafinalstate() and a final state (f), the ideal gas law applies to both states:\n    \frac{P_i V_i}{n_i T_i} = R \quad \text{and} \quad \frac{P_f V_f}{n_f T_f} = R\n * Combining these yields the General Gas Equation:\n    \frac{P_i V_i}{n_i T_i} = \frac{P_f V_f}{n_f T_f}\n\n* **Derivation of the Simple Empirical Gas Laws:**\n * **Boyle's Law (Pressure-Volume Relationship):**\n * For a fixed quantity of gas (n_i = n_f)maintainedatconstanttemperature() maintained at constant temperature (T_i = T_f):\n      \frac{P_i V_i}{\cancel{n_i T_i}} = \frac{P_f V_f}{\cancel{n_f T_f}} \implies P_i V_i = P_f V_f \quad \left(V \propto \frac{1}{P}\right)\n * Gas volume is inversely proportional to pressure.\n\n![Boyle's law isotherm showing hyperbolic inverse relationship between gas volume and applied pressure](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/22.jpg)\n\n* **Charles's Law (Volume-Temperature Relationship):**\n * For a fixed quantity of gas (n_i = n_f)heldatconstantpressure() held at constant pressure (P_i = P_f):\n    \frac{\cancel{P_i} V_i}{\cancel{n_i} T_i} = \frac{\cancel{P_f} V_f}{\cancel{n_f} T_f} \implies \frac{V_i}{T_i} = \frac{V_f}{T_f} \quad (V \propto T)\n * Gas volume is directly proportional to absolute temperature (\text{Kelvin}).\n * Linear volume-temperature plots for different gas amounts extrapolate to zero volume at the identical absolute zero point: -273.15\,^{\circ}\text{C}((0\,\text{K}).\n\n![Charles's law linear volume-temperature plots extrapolating to absolute zero at -273.15 C](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/25.jpg)\n\n * **Avogadro's Law (Volume-Mole Relationship):**\n * At constant temperature (T_i = T_f)andconstantpressure() and constant pressure (P_i = P_f):\n      \frac{\cancel{P_i} V_i}{n_i \cancel{T_i}} = \frac{\cancel{P_f} V_f}{n_f \cancel{T_f}} \implies \frac{V_i}{n_i} = \frac{V_f}{n_f} \quad (V \propto n)\n * Gas volume is directly proportional to the number of moles of gas particles present.\n\n* **Standard Temperature and Pressure (STP) Standards:**\n * **New STP Standard:** Defined at a pressure of 1\,\text{bar}andatemperatureofand a temperature of0\,^{\circ}\text{C}((273.15\,\text{K}). The standard molar volume of an ideal gas under these conditions is:\n    V_m = 22.7\,\text{L/mol}\n * **Old STP Standard:** Defined at a pressure of 1\,\text{atm}((1.01325\,\text{bar})andatemperatureof) and a temperature of0\,^{\circ}\text{C}((273.15\,\text{K}). The standard molar volume of an ideal gas under these conditions is:\n    V_m = 22.4\,\text{L/mol}\n\n* **Worked Example 5-1 (Ideal Gas Equation Calculation):**\n * A 40.20\,\text{L}constant−volumecylindercontainingconstant-volume cylinder containing5.000\,\text{g}ofofHe(g)isheateduntiltheinternalpressurereachesis heated until the internal pressure reaches4.200\,\text{atm}.Calculatethefinalabsolutetemperature. Calculate the final absolute temperatureT.\n * Moles of Helium (M = 4.0026\,\text{g/mol}):\n    n = \frac{5.000\,\text{g}}{4.0026\,\text{g/mol}} = 1.2492\,\text{mol}\n * Solve the ideal gas equation for T:\n    T = \frac{PV}{nR} = \frac{4.200\,\text{atm} \times 40.20\,\text{L}}{1.2492\,\text{mol} \times 0.08206\,\text{L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}} = \frac{168.84}{0.10251} = 1647\,\text{K}\n\n* **Worked Example 5-2 (Molar Mass Determination):**\n * A 10.0\,\text{L}containerholdscontainer holds87.1\,\text{g}ofanunknowngasatof an unknown gas at25.0\,^{\circ}\text{C}((298.15\,\text{K})underapressureof) under a pressure of12.5\,\text{atm}.\n * Calculate moles of gas present:\n    n = \frac{PV}{RT} = \frac{12.5\,\text{atm} \times 10.0\,\text{L}}{0.08206\,\text{L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 298.15\,\text{K}} = \frac{125}{24.466} = 5.109\,\text{mol}\n * Calculate molar mass (M):\n    M = \frac{\text{mass}}{n} = \frac{87.1\,\text{g}}{5.109\,\text{mol}} = 17.05\,\text{g/mol}\n * Candidate gases: A) NH_3((17.03\,\text{g/mol}),B)), B)C_2H_2((26.04\,\text{g/mol}),C)), C)SO_2((64.07\,\text{g/mol}),D)), D)F_2((38.00\,\text{g/mol}),E)), E)NO_2((46.01\,\text{g/mol}).\n * The unknown gas is ammonia, NH_3 (Option A).\n\n* **Worked Example 5-3 (Gas Density Calculation):**\n * Determine the density of carbon dioxide gas (CO_2,,M = 44.01\,\text{g/mol})at) at-15\,^{\circ}\text{C}andand728\,\text{mmHg}.\n * Temperature conversion:\n    T = -15 + 273.15 = 258.15\,\text{K}\n * Pressure conversion:\n    P = \frac{728\,\text{mmHg}}{760\,\text{mmHg/atm}} = 0.9579\,\text{atm}\n * Density derivation from PV = nRT = \left(\frac{m}{M}\right)RT \implies d = \frac{m}{V} = \frac{P \cdot M}{RT}:\n    d = \frac{0.9579\,\text{atm} \times 44.01\,\text{g/mol}}{0.08206\,\text{L}\cdot\text{atm}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 258.15\,\text{K}} = \frac{42.157}{21.184} = 1.99\,\text{g/L}\n\n# Gas Stoichiometry and Gas Mixtures\n\n* **Gases in Chemical Reactions (Law of Combining Volumes):**\n * According to Avogadro's law, gas volume ratios are identical to stoichiometric mole ratios when measured at identical temperature and pressure conditions.\n * Gay-Lussac's Law of Combining Volumes states that the volumes of gases consumed or produced in a chemical reaction stand in simple whole-number ratios matching their stoichiometric coefficients.\n * For the gas-phase synthesis of steam:\n    2H_2(g) + O_2(g) \rightarrow 2H_2O(g)\n * Volume stoichiometric proportion: 20\,\text{L}ofofH_2(g)reactswithreacts with10\,\text{L}ofofO_2(g)toproduceto produce20\,\text{L}ofofH_2O(g)(volumeratio(volume ratio2:1:2).\n\n* **Dalton's Law of Partial Pressures:**\n * The total pressure (P_{\text{tot}}) exerted by a mixture of non-reacting gases is the sum of the partial pressures exerted by each individual gas:\n    P_{\text{tot}} = P_A + P_B + P_C + \dots\n * Partial pressure (P_J)isdefinedasthepressurethatgas) is defined as the pressure that gasJ would exert if it alone occupied the entire container volume at the same temperature.\n\n* **The Mole Fraction (x_A):**\n * The mole fraction (x_A)ofcomponent) of componentAinagaseousmixtureistheratioofmolesofin a gaseous mixture is the ratio of moles ofA to the total moles of all components:\n    x_A = \frac{n_A}{n_{\text{tot}}} = \frac{n_A}{n_A + n_B + \dots}\n * Multiplying the total pressure by the mole fraction gives the partial pressure of component A:\n    P_A = x_A \cdot P_{\text{tot}}\n * Real-world application (Atmospheric Oxygen): Air comprises 21\%O_2bymoles(by moles (x_{O_2} = 0.21).Atstandardsea−levelbarometricpressureof). At standard sea-level barometric pressure of1.0\,\text{atm}, the partial pressure of oxygen is:\n    P_{O_2} = x_{O_2} \cdot P_{\text{tot}} = 0.21 \times 1.0\,\text{atm} = 0.21\,\text{atm}\n\n* **Worked Example 5-4 (Combining Boyle's Law and Dalton's Law):**\n * A 3.00\,\text{L}vesselofvessel ofXe(g)atat3.00\,\text{atm}andaand a2.00\,\text{L}vesselofvessel ofAr(g)atat2.00\,\text{atm}areconnectedviaastopcockandallowedtomixatconstanttemperature.Thefinaltotalvolumeisare connected via a stopcock and allowed to mix at constant temperature. The final total volume isV_{\text{tot}} = 3.00\,\text{L} + 2.00\,\text{L} = 5.00\,\text{L}.\n * Determine the partial pressure of Xe(g) after mixing using Boyle's law:\n    P_1 V_1 = P_2 V_2 \implies P_{Xe} = \frac{3.00\,\text{atm} \times 3.00\,\text{L}}{5.00\,\text{L}} = 1.80\,\text{atm}\n * Determine the partial pressure of Ar(g) after mixing:\n    P_{Ar} = \frac{2.00\,\text{atm} \times 2.00\,\text{L}}{5.00\,\text{L}} = 0.80\,\text{atm}\n * The total system pressure is:\n    P_{\text{tot}} = P_{Xe} + P_{Ar} = 1.80\,\text{atm} + 0.80\,\text{atm} = 2.60\,\text{atm}\n\n* **Collecting an Insoluble Gas Over Water:**\n * Gases produced in laboratory reactions are commonly collected by downward displacement of water inside an inverted collection bottle.\n * The gas collected in the vapor space is saturated with water vapor.\n * When the water level inside the bottle is adjusted to equal the outside water level, the internal total pressure equals ambient barometric pressure:\n    P_{\text{tot}} = P_{\text{bar}} = P_{\text{gas}} + P_{H_2O}\n * The dry gas pressure is calculated by subtracting the saturated vapor pressure of water (P_{H_2O}) at that temperature:\n    P_{\text{gas}} = P_{\text{bar}} - P_{H_2O}\n * Saturated water vapor pressure (P_{H_2O}) depends *exclusively on temperature* and increases with increasing temperature.\n\n![Pneumatic trough apparatus collecting gas over water saturated with water vapor](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/46.jpg)\n\n* **Vapor Pressure of Water Reference Data:**\n * At 15.0\,^{\circ}\text{C}::P_{H_2O} = 12.79\,\text{mmHg}\n * At 17.0\,^{\circ}\text{C}::P_{H_2O} = 14.53\,\text{mmHg}\n * At 19.0\,^{\circ}\text{C}::P_{H_2O} = 16.48\,\text{mmHg}\n * At 21.0\,^{\circ}\text{C}::P_{H_2O} = 18.65\,\text{mmHg}\n * At 23.0\,^{\circ}\text{C}::P_{H_2O} = 21.07\,\text{mmHg}\n * At 25.0\,^{\circ}\text{C}::P_{H_2O} = 23.76\,\text{mmHg}\n * At 30.0\,^{\circ}\text{C}::P_{H_2O} = 31.82\,\text{mmHg}\n * At 50.0\,^{\circ}\text{C}::P_{H_2O} = 92.51\,\text{mmHg}\n\n# Kinetic-Molecular Theory of Gases (KMT)\n\n* **Postulates of the Kinetic-Molecular Theory:**\n * *Point-Mass Particles:* A gas consists of particles (atoms or molecules) treated as point masses possessing mass but negligible individual volume relative to the container volume.\n * *Negligible Particle Volume:* Gas particles are separated by vast intermolecular distances; gas volume consists primarily of empty space.\n * *Absence of Intermolecular Forces:* No attractive or repulsive forces exist between gas particles or between particles and container walls.\n * *Constant Linear Motion:* Particles are in continuous, random, straight-line motion, colliding constantly with one another and the container boundaries.\n * *Completely Elastic Collisions:* All collisions are rapid and perfectly elastic; no net kinetic energy is lost during collisions.\n * *Constant Total Energy:* The average kinetic energy of the particles remains strictly constant as long as the temperature remains constant.\n\n* **Distribution of Molecular Speeds (Maxwell-Boltzmann Distribution):**\n * Molecular speeds across a gas sample exhibit a continuous, right-skewed distribution.\n * Three statistical speeds characterize the distribution curve:\n * **Modal Speed (u_m):** The most probable speed, corresponding to the peak of the speed distribution curve.\n * **Average Speed (u_{av}oror\bar{u}):** Arithmetic mean of particle speeds:\n      u_{av} = \bar{u} = \frac{u_1 + u_2 + \dots + u_N}{N}\n * **Root-Mean-Square Speed (u_{rms}):** Square root of the mean squared speed:\n      u_{rms} = \sqrt{\overline{u^2}} = \sqrt{\frac{u_1^2 + u_2^2 + \dots + u_N^2}{N}}\n * Relative magnitudes across any Maxwell-Boltzmann distribution:\n    u_m < u_{av} < u_{rms}\n\n![Maxwell-Boltzmann distribution of molecular speeds showing relative positions of um, uav, and urms](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/58.jpg)\n\n* **Worked Example 5-5 (Calculating Statistical Speeds):**\n * Four vehicles are clocked by radar at speeds of 63\,\text{mph},,65\,\text{mph},,65\,\text{mph},and, and90\,\text{mph}.\n * Determine the modal speed (u_m):\n    u_m = 65\,\text{mph} \quad (\text{most frequent value})\n * Determine the average speed (u_{av}):\n    u_{av} = \frac{63 + 65 + 65 + 90}{4} = \frac{283}{4} = 70.75\,\text{mph}\n * Determine the root-mean-square speed (u_{rms}):\n    u_{rms} = \sqrt{\frac{(63)^2 + (65)^2 + (65)^2 + (90)^2}{4}} = \sqrt{\frac{3969 + 4225 + 4225 + 8100}{4}} = \sqrt{\frac{20519}{4}} = \sqrt{5129.75} \approx 71.62\,\text{mph}\n\n* **Translational Kinetic Energy:**\n * The translational kinetic energy of an individual gas particle of mass mmovingatspeedmoving at speedu is:\n    e_k = \frac{1}{2} m u^2\n * The average translational kinetic energy (per molecule) across the gas ensemble is directly proportional to absolute temperature (T):\n    \bar{e}k = \frac{1}{2} m u{rms}^2 = \frac{3}{2}\left(\frac{R}{N_A}\right)T\n * The average translational kinetic energy depends *only* on absolute temperature (T). It is completely independent of the chemical identity, size, or molar mass of the gas molecules.\n\n* **Root-Mean-Square Speed Expression:**\n * Multiplying the average kinetic energy relation by 2N_A(where(whereN_A m = M, molar mass):\n    N_A m u_{rms}^2 = 3RT \implies M u_{rms}^2 = 3RT\n    u_{rms} = \sqrt{\frac{3RT}{M}}\n * To yield u_{rms}inmeterspersecond(in meters per second (\text{m/s}), units must be consistent:\n * Universal gas constant: R = 8.314\,\text{J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} = 8.314\,\text{kg}\cdot\text{m}^2\cdot\text{s}^{-2}\cdot\text{mol}^{-1}\cdot\text{K}^{-1}\n * Molar mass (M):mustbeconvertedtokilogramspermole(): must be converted to kilograms per mole (\text{kg/mol},i.e.,, i.e.,\text{g/mol} \times 10^{-3}\n * Temperature (T):inKelvin(): in Kelvin (\text{K})\n * Key physical implications:\n * Molecular speed increases as temperature increases.\n * At identical temperatures, lighter gas molecules (smaller M) move faster than heavier gas molecules.\n\n![Molecular speed distributions illustrating broadening at higher temperature and shifts toward higher speeds for lighter gases](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/61.jpg)\n\n* **Worked Example 5-6 (Calculating u_{rms} for Oxygen Gas):**\n * Calculate the root-mean-square speed of O_2gasatSTP(gas at STP (T = 273.15\,\text{K}).\n * Molar mass of O_2::M = 32.00\,\text{g/mol} = 0.03200\,\text{kg/mol}.\n * Calculate u_{rms}:\n    u_{rms} = \sqrt{\frac{3 \times 8.314\,\text{J}\cdot\text{mol}^{-1}\cdot\text{K}^{-1} \times 273.15\,\text{K}}{0.03200\,\text{kg/mol}}} = \sqrt{\frac{6813.19}{0.03200}} = \sqrt{212912.2} \approx 461.4\,\text{m/s}\n\n# Effusion, Diffusion, and Real Gases\n\n* **Effusion and Graham's Law:**\n * Effusion is the escape of gas molecules from their container through a microscopic pinhole into an evacuated chamber (vacuum) without collisions.\n * The rate of effusion is directly proportional to the molecular root-mean-square speed (u_{rms}).\n * **Graham's Law of Effusion:** The rate of effusion of a gas is inversely proportional to the square root of its molar mass at constant temperature:\n    \frac{\text{Rate of effusion of A}}{\text{Rate of effusion of B}} = \frac{u_{rms, A}}{u_{rms, B}} = \frac{\sqrt{\frac{3RT}{M_A}}}{\sqrt{\frac{3RT}{M_B}}} = \sqrt{\frac{M_B}{M_A}}\n * Lighter gas molecules effuse significantly faster than heavier molecules.\n\n![Effusion comparison showing faster escape of light helium molecules relative to heavier ethylene oxide](https://assets.knowt.com/pdf-flow-prod/7340585c-fec6-4fbe-92ef-f7a75dfd663c-figures/65.jpg)\n\n* **Diffusion in Gases:**\n * Diffusion is the migration of gas molecules through a medium or another gas driven by random molecular motion and concentration gradients.\n * Diffusion occurs at rates vastly slower than molecular root-mean-square speeds (which exceed hundreds of meters per second) because gas molecules experience billions of collisions per second, resulting in random, tortuous mean free paths.\n * Classic Demonstration of Gaseous Diffusion (NH_3andandHCl):\n * When concentrated aqueous ammonia (NH_3)andhydrochloricacid() and hydrochloric acid (HCl) are introduced at opposite ends of an open glass tube:\n      NH_3(g) + HCl(g) \rightarrow NH_4Cl(s)\n * Molar mass of ammonia: M_{NH_3} = 17.03\,\text{g/mol}.\n * Molar mass of hydrogen chloride: M_{HCl} = 36.46\,\text{g/mol}.\n * Because NH_3islighterthanis lighter thanHCl,ammoniamoleculesdiffusefasterdownthetube,causingthewhiteringofsolidammoniumchloride(, ammonia molecules diffuse faster down the tube, causing the white ring of solid ammonium chloride (NH_4Cl(s))toformsignificantlyclosertothe) to form significantly closer to theHCl$$ end.

Diffusion demonstration showing solid ammonium chloride precipitation ring forming closer to the HCl source

  • Deviations from Ideal Gas Behavior (Real Gases):
    • The ideal gas law assumes point masses with zero volume and no attractive forces.
    • Real gases deviate significantly from ideal behavior under conditions of high pressure and low temperature:
    • Under high pressure, the volume occupied by the gas particles themselves becomes significant relative to the reduced total container volume.
    • At low temperatures, molecular kinetic energy decreases, allowing intermolecular attractive forces (van der Waals interactions) to pull particles together and diminish impact force against container walls.