Chemistry Retake

1. Significant Figures and Scientific Notation (LT 1.3)
  1. Identifying Significant Figures

    • Non-zero digits: Always significant (e.g., 345345 has 33 significant figures).

    • Sandwiched zeros: Zeros between non-zero digits are always significant (e.g., 50085008 has 44 significant figures).

    • Leading zeros: Zeros appearing before the first non-zero digit are never significant (e.g., 0.00420.0042 has 22 significant figures).

    • Trailing zeros: Zeros at the end of a number are significant only if a decimal point is present:

    • 15001500 has 22 significant figures.

    • 1500.1500. has 44 significant figures.

    • 15.0015.00 has 44 significant figures.

  2. Rounding in Multiplication and Division

    • Calculate the mathematical result first.

    • Round the final value to the fewest number of significant figures present in any of the original measurements.

    • Example: Multiplying 4.52 cm4.52\,cm (33 significant figures) by 1.4 cm1.4\,cm (22 significant figures) gives 6.328 cm26.328\,cm^2, which rounds to 6.3 cm26.3\,cm^2.

  3. Converting Between Standard Form and Scientific Notation

    • Scientific notation is expressed as M×10nM \times 10^n, where 1≤∣M∣<101 \le |M| < 10 and nn is an integer.

    • Standard to scientific: Move the decimal until one non-zero digit remains to the left:

    • Moving the decimal left yields a positive exponent (e.g., 45000=4.5×10445000 = 4.5 \times 10^4).

    • Moving the decimal right yields a negative exponent (e.g., 0.00032=3.2×10−40.00032 = 3.2 \times 10^{-4}).

    • Scientific to standard: Move the decimal according to the exponent sign and magnitude (positive moves right, negative moves left).

  4. Fixing Improper Scientific Notation

    • The coefficient MM must always satisfy 1≤∣M∣<101 \le |M| < 10.

    • If the coefficient is too large, move the decimal to the left and increase the exponent by the number of places moved:

    • 45.8×103=4.58×10445.8 \times 10^3 = 4.58 \times 10^4

    • If the coefficient is too small, move the decimal to the right and decrease the exponent by the number of places moved:

    • 0.072×10−2=7.2×10−40.072 \times 10^{-2} = 7.2 \times 10^{-4}

2. Dimensional Analysis and Conversions (LT 1.4)
  1. Foundations of Dimensional Analysis

    • Identify the known: The given quantity with its initial unit.

    • Identify the unknown: The target quantity and desired unit.

    • Conversion factor: A fractional ratio equal to 11 that equates two different units (e.g., 100 cm1 m\frac{100\,cm}{1\,m} or 1 m100 cm\frac{1\,m}{100\,cm}.

    • Units must cancel out diagonally until only the target unit remains.

  2. Single-Step Conversions

    • Set up a single conversion factor to cancel the starting unit:

    • Convert 5.4 m5.4\,m to cmcm:       5.4 m×100 cm1 m=540 cm5.4\,m \times \frac{100\,cm}{1\,m} = 540\,cm

  3. Multi-Step Conversions

    • Chain multiple conversion factors systematically:

    • Convert 2.5 days2.5\,\text{days} to seconds\text{seconds}:       2.5 days×24 hours1 day×60 minutes1 hour×60 seconds1 minute=2.2×105 seconds2.5\,\text{days} \times \frac{24\,\text{hours}}{1\,\text{day}} \times \frac{60\,\text{minutes}}{1\,\text{hour}} \times \frac{60\,\text{seconds}}{1\,\text{minute}} = 2.2 \times 10^5\,\text{seconds}

  4. Rate Conversions (Extension)

    • Convert compound units (rates) by converting numerator and denominator units independently:

    • Convert 60.0 mi/h60.0\,mi/h to m/sm/s:       60.0 mi1 h×1609.34 m1 mi×1 h3600 s=26.8 m/s\frac{60.0\,mi}{1\,h} \times \frac{1609.34\,m}{1\,mi} \times \frac{1\,h}{3600\,s} = 26.8\,m/s

3. Classification of Matter and Energy (LT 2.1)
  1. States of Matter

    • Solid: Definite shape and definite volume; particles are tightly packed and vibrate in fixed positions.

    • Liquid: Indefinite shape (takes the shape of the container) and definite volume; particles are closely packed but slide past one another.

    • Gas: Indefinite shape and indefinite volume (expands to fill the container completely); particles move rapidly, randomly, and are spaced far apart.

  2. Energy Classification: Potential vs. Kinetic

    • Potential Energy: Stored energy based on position, composition, or state.

    • Kinetic Energy: Energy associated with the motion of an object or particle.

  3. Forms of Energy in a System

    • Chemical energy: Potential energy stored in chemical bonds between atoms.

    • Nuclear energy: Potential energy held within the nucleus of an atom.

    • Gravitational energy: Potential energy dependent on an object's mass and height above a reference point.

    • Electrical energy: Kinetic energy of moving electrons, or potential energy within an electric field.

    • Radiant (light) energy: Kinetic electromagnetic energy traveling in transverse waves.

    • Thermal energy: Total internal kinetic energy of all vibrating particles in a substance.

    • Motion (mechanical) energy: Kinetic energy of macroscopic objects moving from one place to another.

  4. Molecular Kinetic Energy, Temperature, and Heat

    • Temperature: A measure of the average kinetic energy of the individual particles in a substance. Higher temperature corresponds to faster average particle movement.

    • Heat: The transfer of thermal energy between substances due to a temperature gradient. Heat spontaneously flows exclusively from a higher-temperature object to a lower-temperature object until thermal equilibrium is reached.

4. Density and Buoyancy (LT 2.4)
  1. Density Definition and Calculations

    • Density measures the amount of mass contained within a given unit volume:     ρ=mV\rho = \frac{m}{V}

    • Calculating mass from density and volume:     m=ρ×Vm = \rho \times V

    • Calculating volume from mass and density:     V=mρV = \frac{m}{\rho}

    • Common units include g/cm3g/cm^3 for solids and g/mLg/mL for liquids, where 1 cm3=1 mL1\,cm^3 = 1\,mL.

  2. Determining Volume for Density Calculations

    • Regularly shaped solids: Volume is calculated using geometric formulas (e.g., for a rectangular prism, V=l×w×hV = l \times w \times h).

    • Irregularly shaped solids: Volume is determined by the water displacement method:     Vobject=Vfinal−VinitialV_{\text{object}} = V_{\text{final}} - V_{\text{initial}}

  3. Microscopic Model of Density

    • Density depends on two factors at the particulate level:

    • The individual mass of the atoms or molecules.

    • How closely packed the particles are within a given space.

    • A higher-density material contains either heavier particles or particles packed more tightly together than a lower-density material of the same volume.

  4. Predicting Sinking and Floating

    • An object sinks in a fluid if its density is greater than the fluid's density (ρobject>ρfluid\rho_{\text{object}} > \rho_{\text{fluid}}).

    • An object floats in a fluid if its density is less than the fluid's density (ρobject<ρfluid\rho_{\text{object}} < \rho_{\text{fluid}}).

    • Pure liquid water has a density of approximately 1.00 g/cm31.00\,g/cm^3 at room temperature, meaning substances with ρ<1.00 g/cm3\rho < 1.00\,g/cm^3 float in water, while substances with ρ>1.00 g/cm3\rho > 1.00\,g/cm^3 sink.