Comprehensive Study Notes on Alkanes, Alkenes, and Related Hydrocarbons
Fundamentals of Hydrocarbons and Alkanes
Hydrocarbons are organic chemical compounds composed entirely of two elements: hydrogen and carbon.
Carbon forms the backbone of all organic molecules due to its tetravalent nature, allowing each carbon atom to establish four covalent bonds. This tetravalency enables carbon atoms to link together into straight open chains, branched frameworks, or cyclic ring structures.
Alkanes are saturated hydrocarbons containing solely single covalent bonds ( bonds) between carbon atoms. The term saturated denotes that each carbon atom is bonded to the maximum possible number of hydrogen atoms for an open-chain structure, precluding double or triple bonds.
Alkanes are historically and traditionally designated as paraffins, a term derived from the Latin parum affinis, meaning "little affinity." This name reflects their relative chemical inertness and low reactivity under standard laboratory conditions. Despite this stability, alkanes participate in specific reactions under suitable energetic or catalytic conditions, including combustion, halogenation, and pyrolysis (cracking).
The general molecular formula for open-chain (acyclic) alkanes containing one or more carbon atoms is , where denotes the number of carbon atoms:
- For , the hydrogen count is , yielding the molecular formula (pentane).
- For , the hydrogen count is , yielding the molecular formula (octane).
- This general formula applies strictly to acyclic alkanes and does not apply to cyclic alkanes (cycloalkanes).
The first ten continuous-chain members of the alkane homologous series are:
- Methane:
- Ethane:
- Propane:
- Butane:
- Pentane:
- Hexane:
- Heptane:
- Octane:
- Nonane:
- Decane:
A homologous series is a family of organic compounds that share a common general formula, possess similar chemical properties, and exhibit a constant incremental structural difference of a methylene group () between successive members. Each individual compound belonging to such a series is termed a homologue.
Each successive homologue in the open-chain alkane series increases in molecular mass by approximately (representing one carbon atom at and two hydrogen atoms at each).
Members of a homologous series exhibit analogous chemical behavior because they possess identical covalent bonding types and functional motifs. Conversely, their physical properties (such as melting points, boiling points, densities, and physical states) change systematically as the molecular weight and carbon chain length increase (e.g., lower homologues like methane are gases at room temperature, while higher homologues exist as liquids or waxy solids).
Structural Classifications and Isomerism in Alkanes
Alkanes are classified based on the structural arrangement of their carbon skeletons into straight chains, branched chains, and cyclic frameworks:
- Normal alkanes (-alkanes): Consist of an unbranched, continuous chain of carbon atoms. The prefix designates this straight-chain geometry, differentiating it from branched constitutional isomers sharing the identical molecular formula.
- Branched-chain alkanes: Consist of a primary continuous carbon chain to which one or more carbon-containing alkyl groups (side chains) are attached, breaking linear continuity.
- Isoalkanes: Branched alkanes characterized structurally by a carbon atom bonded to three other carbon atoms, typically terminating in an isopropyl grouping, . An example is isopentane (systematic name: 2-methylbutane).
- Neoalkanes: Branched alkanes featuring a quaternary carbon atom bonded directly to four other carbon atoms, typically terminating in a tert-butyl grouping, . An example is neohexane (, systematic name: 2,2-dimethylbutane).
- Mesoalkanes: Branched alkane structures characterized by internal symmetrical branching motifs.
Isomerism occurs when two or more distinct chemical compounds possess identical molecular formulas but differ in the spatial orientation or connectivity of their constituent atoms. Such compounds are designated as isomers, and their structural divergence imparts distinct physical and chemical properties.
Structural (Constitutional) Isomerism:
- In structural isomerism, compounds share the same molecular formula but exhibit different atom-to-atom bonding connectivities.
- Chain isomerism is a subtype of constitutional isomerism where the variance lies specifically in the branching arrangement of the carbon skeleton. For example, both butane (-butane) and 2-methylpropane (isobutane) share the molecular formula , yet butane forms a continuous four-carbon chain with a higher boiling point, while 2-methylpropane possesses a branched three-carbon parent chain with a lower boiling point.
Stereoisomerism:
- Stereoisomers possess identical molecular formulas and identical atom connectivity, but differ in the three-dimensional spatial orientation of their atoms or groups.
- Cis-trans isomerism occurs across structural features with restricted rotation, such as double bonds or ring systems. The cis configuration indicates that specified identical or reference groups reside on the same geometric side, whereas the trans configuration indicates they reside on opposite geometric sides (e.g., cis-1,2-dibromoethene versus trans-1,2-dibromoethene).
Functional Group Isomerism:
- Functional group isomers share identical molecular formulas but contain entirely different functional group classes (e.g., ethyl methyl ketone and butanaldehyde, which both share the formula but belong to ketones and aldehydes, respectively).
- Alkanes do not exhibit functional group isomerism because they possess no functional groups other than saturated carbon-carbon and carbon-hydrogen single bonds.
Conformational Isomerism (Conformers):
- Conformers represent distinct spatial arrangements produced exclusively by free rotation around carbon-carbon single () bonds without breaking any chemical bonds.
- Staggered conformation: The carbon-hydrogen bonds on the front carbon atom bisect the dihedral angles of the carbon-hydrogen bonds on the rear carbon atom when viewed along the carbon-carbon bond axis. This arrangement maximizes inter-electronic distance and minimizes torsional strain, rendering it the lowest energy and most stable conformer.
- Eclipsed conformation: The carbon-hydrogen bonds on the front carbon atom align directly with the bonds on the rear carbon atom. This direct alignment generates steric and electron-pair repulsion, resulting in higher torsional strain and lower thermodynamic stability.
Configurational Isomerism:
- Configurational isomers cannot interconvert via simple bond rotations; interconversion requires breaking and reforming covalent bonds.
- Enantiomers are stereoisomers that are non-superimposable mirror images of one another, exhibiting chiral behavior analogous to left and right human hands.
Alkyl Groups and Radicals:
- An alkyl group is a partial molecular fragment derived by abstracting one hydrogen atom from an alkane, leaving an open bonding site represented by the general formula .
- Nomenclature dictates replacing the "-ane" suffix of the parent alkane with "-yl" (e.g., methane becomes methyl, ; ethane becomes ethyl, ; propane becomes propyl, ).
- An alkyl substituent is an atom or group attached to the primary parent carbon chain.
- A fundamental chemical distinction exists between an alkyl group and a free alkyl radical: an alkyl group represents a bound molecular substituent attached to another molecular moiety, whereas a free radical is an independent, highly reactive chemical species bearing an unpaired valence electron.
Nomenclature Systems for Alkanes
Common (Trivial) Nomenclature:
- Traditional designations utilized for familiar low-molecular-weight hydrocarbons (e.g., methane, propane, isobutane, isopentane, neopentane).
- These names remain recognized in commercial and industrial contexts but fail to systematically convey three-dimensional connectivity or unambiguous structural arrangements for complex branched isomers.
Derived System of Nomenclature:
- An older methodology that conceptualizes all branched alkanes as substitution derivatives of the simplest hydrocarbon, methane.
- The most heavily substituted carbon atom is identified as the central "methane" core, and all surrounding attached groups are named as substituents modifying that base methane unit.
IUPAC (International Union of Pure and Applied Chemistry) Systematic Nomenclature:
- Standardized set of rules enabling the derivation of an unambiguous chemical name directly from the structural formula.
- Step 1: Identify the parent carbon chain. Locate the longest continuous chain of carbon atoms. The number of carbons in this primary sequence determines the base parent name (e.g., 1 carbon = methane, 2 = ethane, 3 = propane, 4 = butane, 5 = pentane, 6 = hexane, 7 = heptane, 8 = octane, 9 = nonane, 10 = decane). When two candidate chains share the identical maximum length, choose the chain that possesses the greater number of substituent branches.
- Step 2: Number the parent chain carbons sequentially. Begin numbering from the terminal end that assigns the lowest possible numerical locants to the carbons bearing substituents.
- Step 3: Identify and locate all substituents. Assign each substituent an identity (such as methyl, ; ethyl, ; propyl, ) coupled to its specific numerical carbon locant on the parent chain.
- Step 4: Accommodate repeated substituents using multiplicative prefixes. If the identical alkyl substituent occurs multiple times, indicate this repetition with prefixes like di-, tri-, tetra-, or penta-. Every individual substituent must receive its own distinct locant, separated by commas (e.g., 2,4-dimethylpentane).
- Step 5: Alphabetize substituents. When differing substituents are present, order them alphabetically by their substituent name before appending the parent alkane name (e.g., ethyl precedes methyl). Multiplying prefixes (di-, tri-, tetra-) are ignored during alphabetical sorting.
- Step 6: Punctuate the assembled name correctly. Use commas strictly to separate numbers from other numbers. Use hyphens strictly to separate numbers from letters/words. Do not insert spaces between components; the final alkyl substituent and the parent chain merge into a single word (e.g., 3-ethyl-2-methylhexane).
Occurrence and Industrial Significance of Alkanes
Natural Gas:
- A naturally occurring subterranean mixture of gaseous hydrocarbons formed via slow geological thermogenic and biogenic degradation of buried prehistoric organic matter.
- Methane () represents the predominant principal component (typically over ), accompanied by minor fractions of ethane, propane, butane, and inert gases.
Petroleum (Crude Oil):
- A complex, naturally occurring subterranean liquid mixture consisting predominantly of alkanes, cycloalkanes, and diverse hydrocarbon families.
- Crude petroleum is refined and separated via fractional distillation based on boiling point differentials into commercial fractions: light petroleum gases, gasoline, naphtha, kerosene, diesel fuels, lubricating oils, heavy fuel oil, and paraffin wax residues.
Alternative Fossil Deposits:
- Oil Shale: A fine-grained sedimentary rock containing solid organic kerogen. When subjected to pyrolysis under retorting conditions, kerogen decomposes into synthetic liquid and gaseous hydrocarbons.
- Marsh Gas: The historical and common designation for biogenic methane generated through anaerobic microbial decomposition of vegetable matter in wetlands and swamps.
- Biological sources: Specific alkanes are synthesized biochemically by certain plants (as epicuticular surface waxes) and insects (as pheromones or cuticular protective barriers).
Commercial Uses of Alkanes:
- Fuels: Alkanes release high thermodynamic heat upon oxidation. Methane powers domestic heating, natural gas systems, and electricity generation; liquefied petroleum gas (LPG, composed primarily of propane and butane) serves domestic cooking and portable heating needs; higher liquid fractions power vehicular transportation.
- Solvents: Liquid alkanes (such as pentane, hexane, and petroleum ether fractions) serve as nonpolar solvents capable of dissolving fats, oils, and waxes.
- Kerosene: A middle-distillate hydrocarbon fraction utilized globally for domestic heating, space illumination, and as specialized jet aviation fuel (e.g., Jet-A).
- Lubricants and Greases: High-molecular-weight liquid and semi-solid hydrocarbons reduce mechanical friction and wear between contiguous moving surfaces.
- Paraffin Wax: Long-chain solid alkanes utilized extensively in candle manufacturing, waterproof coatings, electrical insulation, and wax formulations.
Laboratory and Industrial Synthesis of Alkanes
Hydrogenation of Alkenes (Reduction):
- An addition reaction wherein molecular hydrogen gas () reacts across the carbon-carbon double bond of an alkene in the presence of a finely divided transition metal catalyst, such as nickel (), platinum (), or palladium ():
- The reaction converts unsaturated bonds into stable bonds without altering the original carbon chain length. Examples include the conversion of ethylene () to ethane (), and propylene () to propane ().
Reduction of Alkyl Halides:
- Alkyl halides (, where ) undergo reductive dehalogenation under reducing conditions (such as nascent hydrogen generated by zinc and hydrochloric acid), replacing the electronegative halogen with hydrogen:
- An example is the reduction of bromoethane to ethane ().
Grignard Reagent Synthesis and Protonation:
- Organomagnesium halides (), known as Grignard reagents, are prepared by reacting alkyl halides with metallic magnesium turnings in anhydrous dry ether:
- The carbon-magnesium bond is highly polarized, rendering the alkyl carbon nucleophilic and strongly basic. Grignard reagents react violently and instantaneously with water or any active proton donor (, , ) to yield the corresponding alkane:
- Strict anhydrous (water-free) conditions are required throughout preparation to prevent premature decomposition of the organometallic reagent.
Wurtz Reaction:
- A carbon-carbon coupling reaction in which two molecules of an alkyl halide are treated with metallic sodium in dry ether to form a symmetrical alkane containing double the carbon count of the starting alkyl halide:
- For example, two molecules of bromoethane couple to produce butane (-butane):
- Synthetic limitation: If two distinct alkyl halides ( and ) are reacted together, a statistical cross-coupling mixture of three distinct alkanes (, , and ) is generated, which is difficult to separate.
Decarboxylation of Carboxylate Salts:
- Pyrolysis of an anhydrous sodium salt of a carboxylic acid () with solid soda lime (a dry mixture of sodium hydroxide, , and calcium oxide, ) drives off carbon dioxide as carbonate:
- The resulting alkane contains exactly one fewer carbon atom than the precursor carboxylate salt. For example, heating sodium acetate () with soda lime produces methane ().
Industrial Synthesis from Coal:
- Bergius Process: Direct catalytic hydrogenation of pulverized coal subjected to high temperatures () and high pressures () in the presence of iron catalysts to yield synthetic liquid hydrocarbons analogous to crude petroleum.
- Fischer-Tropsch Process: Indirect liquefaction converting synthesis gas (syngas, a mixture of carbon monoxide and hydrogen gas) over cobalt or iron catalysts at into a distribution of open-chain alkanes:
- For example, the synthesis of octane proceeds according to the balanced stoichiometry:
Hydrolysis of Aluminum Carbide:
- Pure methane is produced in the laboratory by the action of cold water or dilute hydrochloric acid on solid aluminum carbide ():
Physical and Chemical Properties of Alkanes
Physical States across the Homologous Series at Room Temperature ():
- to (methane, ethane, propane, butane): Gaseous.
- to (pentane through hexadecane): Volatile to oily liquids.
- and higher ( to ): Waxy solids (paraffin waxes).
Intermolecular Forces and Boiling Point Dynamics:
- Alkanes are nonpolar molecules possessing symmetrical electron distributions and negligible electronegativity differences between carbon () and hydrogen ().
- Intermolecular attraction is mediated exclusively by weak London dispersion forces (induced dipole-induced dipole interactions).
- Boiling points correlate directly with molecular weight and surface area: larger molecules have larger, more polarizable electron clouds, producing stronger instantaneous dipoles and higher boiling points.
- Structural branching decreases the boiling point: a branched isomer adopts a more spherical, compact three-dimensional geometry with reduced surface area of contact, weakening intermolecular dispersion forces relative to an unbranched, straight-chain isomer.
Density:
- Alkanes possess densities ranging between and , consistently lower than that of liquid water (). Consequently, liquid alkanes float on top of water, forming a distinct immiscible upper layer.
Solubility Characteristics:
- Alkanes are insoluble or virtually immiscible in polar solvents like water because they cannot form stabilizing hydrogen bonds or overcome strong water-water dipole attractions ("like dissolves like").
- Alkanes are miscible in nonpolar and organic solvents, including diethyl ether, benzene, chloroform, and carbon tetrachloride.
Color, Odor, and Flammability:
- Pure alkanes are colorless, non-toxic in low concentrations, and completely odorless.
- Highly combustible in oxygen, releasing substantial thermal energy. Open handling demands rigorous ventilation and isolation from ignition sources.
Chemical Inertness to Mild Laboratory Reagents:
- Under standard ambient conditions, alkanes do not react with concentrated aqueous acids (, ), strong aqueous bases (, ), or powerful oxidizing agents like potassium permanganate ().
- Alkanes do not decolorize alkaline solutions, distinguishing saturated hydrocarbons from unsaturated alkenes and alkynes.
Combustion (Oxidation) Reactions:
- Complete Combustion: Occurs in the presence of excess oxygen, fully oxidizing the hydrocarbon to carbon dioxide and water vapor while liberating heat:
- Incomplete Combustion: Occurs under oxygen-deficient conditions, yielding toxic carbon monoxide (), elemental carbon soot (), and water vapor:
Free Radical Halogenation:
- Alkanes react with halogens (, ) via a photochemical substitution reaction where hydrogen atoms are replaced sequentially by halogen atoms.
- The reaction remains uninitiated in total darkness but proceeds rapidly under ultraviolet (UV) light or elevated thermal energy (), which provides the activation energy necessary for homolytic bond cleavage of the halogen molecule ().
- For example, the sequential chlorination of methane produces chloromethane (), dichloromethane (), trichloromethane (chloroform, ), and tetrachloromethane (carbon tetrachloride, ), with concomitant formation of hydrogen chloride gas ():
Nitration:
- Alkanes react with hot fuming nitric acid () vapor at elevated temperatures () to yield nitroalkanes:
- For example, the vapor-phase nitration of ethane yields nitroethane (). Unlike aromatic nitration, alkane nitration involves homolytic bond fission and often induces carbon-carbon bond cleavage, generating mixtures of nitroalkane homologues.
Pyrolysis (Thermal Cracking):
- The thermal decomposition of long-chain high-boiling petroleum alkanes into smaller, commercially valuable lower alkanes, alkenes, and hydrogen gas in the absence of oxygen at temperatures exceeding :
Steam Methane Reforming (Modified Water Gas Reaction):
- Methane reacts endothermically with superheated steam () at over a nickel catalyst to synthesize synthesis gas (syngas), an industrial precursor for bulk hydrogen and methanol manufacture:
Methane and Cycloalkanes
Specialized Properties of Methane ():
- Methane is the simplest possible saturated hydrocarbon and the primary constituent of natural gas.
- Possesses a symmetrical tetrahedral molecular geometry wherein the central carbon atom is bonded to four hydrogen atoms, with bond angles of exactly .
- Physical profile: Odorless, colorless, lighter than air (density at STP), and forms explosive mixtures with atmospheric air at volume concentrations between and .
- Odorization: Because pure methane is odorless and undetectable by human olfaction, commercial municipal natural gas supplies are odorized with organosulfur compounds (such as tert-butyl mercaptan or methyl mercaptan) to permit olfactory detection of dangerous gas leaks.
- Synthesis routes for methane include:
- Pyrolysis of sodium acetate with soda lime ().
- Hydrolysis of aluminum carbide ().
- Protonation of methylmagnesium halides ().
- Catalytic methanation: The catalytic reduction of carbon monoxide with hydrogen over nickel at ().
Cycloalkanes:
- Saturated cyclic hydrocarbons whose carbon atoms link into a closed aliphatic ring system containing solely carbon-carbon single bonds.
- Monocyclic cycloalkanes possess the general formula , containing exactly two fewer hydrogen atoms than open-chain acyclic alkanes of equivalent carbon number (). Consequently, cycloalkanes are constitutional isomers of open-chain mono-alkenes.
- Cyclopropane () represents the smallest cycloalkane, possessing two fewer hydrogens than propane ().
- Physical Properties: Cycloalkanes are nonpolar, insoluble in water, soluble in organic solvents, and display boiling points, melting points, and densities that are slightly higher than their corresponding open-chain acyclic counterparts due to compact molecular packing.
- Preparation of Cycloalkanes:
- Dehalogenation of terminal (-) alkyl dihalides: Treating an appropriate dihalide (such as 1,3-dibromopropane) with metallic zinc powder induces intramolecular ring closure with precipitation of zinc bromide:
- Intramolecular Wurtz-type cyclization: Using metallic sodium in dry ether to couple terminal dihalides into small three- to six-membered saturated carbocycles.
Fundamentals, Structure, and Bonding of Alkenes
Alkenes are unsaturated hydrocarbons containing at least one carbon-carbon double bond ().
Unsaturated denotes that the carbon framework does not accommodate the maximum theoretical quantity of hydrogen atoms possible for an open-chain alkane. The carbon atoms participating in the double bond possess unfilled valence capacities that allow addition reactions with incoming reagents.
Alkenes were historically termed olefins, a name originating from the French gaz oléfiant ("oil-forming gas"), because the reaction of gaseous lower alkenes (such as ethylene) with halogens (such as chlorine or bromine) yields oily liquid dihalogenated products.
The general molecular formula for acyclic (open-chain) alkenes containing one double bond is . Every successive alkene homologue differs from the preceding member by a methylene () unit, forming a homologous series:
- Ethene (ethylene):
- Propene (propylene):
- Butene (butylene):
- Pentene (amylene):
- Hexene:
Orbital Structure and Nature of the Double Bond:
- Each carbon atom participating in a double bond adopts a planar geometry, forming three equivalent coplanar bonds with bond angles of approximately , leaving one unhybridized orbital perpendicular to the molecular plane.
- The carbon-carbon double bond consists of two distinct components:
- One (sigma) bond: Formed by the direct, end-to-end (head-on) overlap of orbitals along the internuclear axis connecting the two carbon nuclei. This bond is strong, localized, and possesses cylindrical symmetry.
- One (pi) bond: Formed by the weaker, lateral (sideways) overlap of parallel, unhybridized orbitals positioned above and below the nodal plane of the nuclei.
- The bond is characterized by exposed electron density located away from the internuclear axis, rendering it weaker and more polarizable than the bond.
Relative Chemical Reactivity:
- While alkanes contain only stable, nonpolar bonds, alkenes possess a reactive bond.
- Under reaction conditions, the bond breaks readily while the underlying bond remains intact, enabling both participating carbon atoms to form new single covalent bonds with incoming atoms or functional groups.
- The unit functions as the defining functional group of the alkene series, governing characteristic chemical reactions including catalytic hydrogenation, halogenation, hydrohalogenation, and acid-catalyzed hydration.
Nomenclature and Isomerism of Alkenes
Common (Trivial) Nomenclature of Alkenes:
- Derived by replacing the suffix "-ane" of the corresponding alkane with "-ylene" (e.g., ethylene, propylene, butylene, amylene/pentylene).
- Older systems designated the double bond position relative to the terminal carbon using Greek letters, such as -butylene (for 1-butene) and -butylene (for 2-butene).
Derived System of Nomenclature:
- Treats all alkenes as derivatives of the primary parent molecule, ethylene ().
- Alkyl substituents are named as groups replacing the ethylenic hydrogens (e.g., symmetrical dimethylethylene designates , whereas unsymmetrical dimethylethylene designates ).
IUPAC Systematic Nomenclature of Alkenes:
- Step 1: Select the longest continuous carbon chain that explicitly contains both carbons of the carbon-carbon double bond as the parent chain, even if a longer saturated chain exists elsewhere in the molecule.
- Step 2: Convert the corresponding alkane suffix "-ane" to "-ene" (e.g., propane becomes propene, butane becomes butene).
- Step 3: Number the parent chain from the terminal end nearest to the double bond, ensuring the double bond carbons receive the lowest possible numerical locants.
- Step 4: Specify the position of the double bond by prefixing the parent alkene name with the lower-numbered carbon locant of the double bond (e.g., 1-butene versus 2-butene, or under post-1993 IUPAC recommendations, but-1-ene and but-2-ene).
- Step 5: Identify, locate, and alphabetize all substituent groups. Attach the substituent names along with their respective numerical locants to the front of the alkene parent name (e.g., 2-methylpropene).
Chain and Positional Isomerism in Alkenes:
- Chain Isomers: Possess the same molecular formula and double bond status, but differ in the branching pattern of the carbon skeleton (e.g., 1-butene, , versus 2-methylpropene, , both sharing the formula ).
- Positional Isomers: Possess identical carbon skeletons, but differ in the position of the double bond along the chain (e.g., 1-butene, where the double bond spans carbons 1 and 2, versus 2-butene, where the double bond spans carbons 2 and 3).
Geometric (Cis-Trans) Isomerism:
- Originates from the restricted rotation around the carbon-carbon double bond. Free rotation is prohibited under standard conditions because rotating the carbons relative to one another would misalign the parallel orbitals and break the bond, which requires approximately of activation energy.
- Condition for geometric isomerism: Each carbon atom participating in the double bond must be bonded to two non-identical atoms or groups (, where and ). If either carbon atom carries two identical substituents (e.g., ), geometric isomerism cannot exist.
Cis isomer: The identical, similar, or main-chain carbon groups reside on the same geometric side of the double bond reference plane (e.g., cis-2-butene).
Trans isomer: The reference groups reside on opposite sides of the double bond reference plane (e.g., trans-2-butene).
Distinct physical and chemical properties: Cis and trans isomers display distinct melting points, boiling points, dipole moments, densities, and thermodynamic stabilities (e.g., trans isomers generally pack more efficiently in crystals, imparting higher melting points and greater thermodynamic stability relative to cis isomers).
Synthesis and Preparation of Alkenes
Dehydration of Alcohols:
- An elimination reaction wherein an alcohol is heated in the presence of a strong mineral acid catalyst (such as concentrated sulfuric acid, , or phosphoric acid, ) or passed over heated solid aluminum oxide () at to eliminate water ():
- The acid catalyst protonates the hydroxyl group, transforming the poor leaving group () into a stable leaving group (), which leaves as water to generate a carbocation intermediate that loses a proton to yield the alkene.
- For example, ethanol undergoes dehydration at with concentrated sulfuric acid to yield ethene:
Dehydration of Higher Alcohols and Zaitsev's (Saytzeff's) Rule:
- When secondary or tertiary alcohols undergo acid-catalyzed dehydration, water elimination can yield multiple constitutional alkene isomers.
- Zaitsev's Rule: In elimination reactions, the major alkene product is the more substituted alkene (the alkene carrying the greater number of alkyl substituents attached directly to the double bond carbons).
- Dehydration of 2-butanol () produces a mixture of 2-butene (major product) and 1-butene (minor product):
- Thermodynamic basis: Alkyl groups stabilize the electron-deficient system through hyperconjugation (overlap of bonds with the vacant orbital) and weak inductive electron donation, lowering the transition-state energy leading to the more substituted isomer.
Dehydrohalogenation of Alkyl Halides:
- The base-induced elimination of a hydrogen halide () from adjacent carbon atoms of an alkyl halide (a -elimination reaction).
- Effected by heating an alkyl halide with a concentrated alcoholic or strong aqueous base (such as potassium hydroxide, , dissolved in ethanol):
- For example, heating bromoethane with alcoholic produces ethene, potassium bromide, and water:
Dehalogenation of Vicinal Dihalides:
- Vicinal dihalides are compounds bearing two halogen atoms on adjacent carbon atoms.
- Heating a vicinal dihalide with activated zinc dust in an organic solvent (such as ethanol or acetic acid) induces elimination of the halogen atoms as zinc halide (), forming a double bond:
- For example, the treatment of 1,2-dibromoethane with zinc dust yields ethene and zinc bromide ().
Industrial Cracking and Catalytic Reforming:
- In industrial petrochemical processing, large-chain alkanes derived from crude oil are cracked at high temperatures (), frequently over zeolite catalysts, to break carbon-carbon bonds.
- This process produces a mixture of lower-molecular-weight alkanes and valuable light alkenes (such as ethylene and propylene):
- Catalytic reforming differs from simple elimination; it is a complex industrial process involving simultaneous isomerization, cyclization, and dehydrogenation transformations to upgrade low-octane naphtha into high-octane aromatic and branched compounds.
Physical and Chemical Properties of Alkenes
Physical States across the Homologous Series at Room Temperature ():
- Lower alkenes ( to : ethene, propene, and the butene isomers): Colorless gases.
- Intermediate alkenes ( to ): Volatile to oily liquids.
- Higher alkenes (): Waxy solids.
Odor Profile:
- Lower alkenes possess a faint, characteristic sweetish ethereal odor; however, odor is not an analytically reliable or safe laboratory diagnostic for identification.
Solubility Behavior:
- Insoluble or virtually immiscible in water because they are nonpolar and cannot establish stabilizing hydrogen bonds with aqueous solvent molecules.
- Readily soluble in nonpolar and common organic solvents, such as diethyl ether, petroleum ether, benzene, and carbon tetrachloride.
Density:
- Consistently lower than that of water (typically ranging from to ). Liquid alkenes form an immiscible layer that floats on water.
Boiling Points and Melting Points:
- Boiling points increase systematically with molecular mass, rising by roughly for each additional methylene () unit due to increased London dispersion forces.
- Branching of the carbon chain lowers the boiling point relative to linear isomers by reducing molecular surface area and contact efficiency.
- Geometric isomerism influences physical constants: cis isomers typically exhibit higher boiling points than trans isomers due to net molecular dipole moments (e.g., cis-1,2-dichloroethene has a net dipole, while trans-1,2-dichloroethene has opposed, canceling bond dipoles with a zero dipole moment). Conversely, trans isomers pack more symmetrically into crystal lattices, yielding higher melting points.
Addition and Oxidation Reactions of Alkenes
Electrophilic Addition Principle:
- The dominant reaction pathway for alkenes is electrophilic addition, wherein an attacking electrophile opens the exposed, high-energy bond without severing the underlying framework, converting an unsaturated bond into a saturated single bond:
Catalytic Hydrogenation:
- Addition of molecular hydrogen across the double bond over transition metal catalysts (, , or ) under ambient or elevated pressures to yield alkanes:
- This reaction represents a classic organic reduction, defined as a gain of hydrogen atoms and a corresponding decrease in the formal oxidation state of the double-bonded carbon atoms.
Halogenation:
- Halogens (, ) add rapidly across alkenes at room temperature in inert solvents (such as or ) without requiring catalysts, producing vicinal dihalides:
- Bromine Test for Unsaturation: Bromine dissolved in an organic solvent forms an intense reddish-brown solution. Upon addition to an alkene, rapid electrophilic addition consumes the halogen, causing the reddish-brown color to discharge and leave a colorless solution. While this reaction indicates the presence of unsaturation, it is not strictly specific to alkenes, as alkynes and certain active compounds can also decolorize bromine.
Hydrohalogenation and Markovnikov's Rule:
- Hydrogen halides (, , ) add across the double bond to yield alkyl halides:
- Markovnikov's Rule: In the electrophilic addition of an unsymmetrical reagent () to an unsymmetrical alkene, the acidic hydrogen atom attaches preferentially to the double-bonded carbon that already bears the greater number of hydrogen atoms, while the halide group () attaches to the more substituted carbon (the carbon bearing fewer hydrogens).
- Mechanism: Addition of a proton () to the carbon with more hydrogens yields the more highly substituted, thermodynamically stable carbocation intermediate (tertiary > secondary > primary), which is subsequently captured by the halide nucleophile.
- For example, the addition of to propene produces 2-bromopropane as the major product:
The Peroxide Effect (Kharasch Effect):
- When hydrogen bromide () is reacted with an unsymmetrical alkene in the presence of organic peroxides (), addition occurs with anti-Markovnikov regioselectivity, yielding the terminal alkyl halide as the major product:
- The peroxide undergoes homolytic cleavage to generate radical species, initiating a free radical chain addition mechanism wherein the bromine radical adds first to the less substituted carbon to generate the more stable alkyl radical intermediate.
- Chemical Scope Restriction: The peroxide effect applies exclusively to hydrogen bromide (). It does not reverse the addition regiochemistry for hydrogen chloride (, because homolytic cleavage of the strong bond is endothermic) or hydrogen iodide (, because iodine radicals recombine endothermically instead of adding across the double bond).
Addition of Sulfuric Acid:
- Cold, concentrated sulfuric acid () adds across alkenes via electrophilic addition, forming alkyl hydrogen sulfates:
- The reaction follows Markovnikov regiochemistry, attaching hydrogen to the terminal carbon and the bisulfate ester group () to the secondary carbon.
Acid-Catalyzed Hydration:
- The addition of water () across the double bond in the presence of a strong non-nucleophilic mineral acid catalyst (typically dilute aqueous or ) to yield alcohols:
- The reaction proceeds via Markovnikov addition: a proton attacks the alkene to form the more stable carbocation, water attacks the carbocation, and a subsequent deprotonation step regenerates the acid catalyst. This reaction is widely used in industrial alcohol manufacturing.
Addition of Hypochlorous Acid (Chlorohydrin Formation):
- Hypochlorous acid (), generated from chlorine gas in aqueous media, adds across an alkene to form a chlorohydrin containing a chlorine atom and a hydroxyl group on adjacent carbon atoms:
Combustion (Thermal Oxidation):
- Complete combustion in excess atmospheric oxygen burns alkenes into carbon dioxide and water vapor, releasing heat:
- Due to their higher carbon-to-hydrogen ratio compared to alkanes, alkenes burn with a more luminous and smoky/sooty flame, especially under oxygen-deficient conditions. Combustion is not a diagnostic test for unsaturation, as all hydrocarbons undergo oxidation.
Oxidation with Potassium Permanganate (Baeyer's Test):
- Baeyer's reagent is a cold, dilute, alkaline aqueous solution of potassium permanganate (), which acts as a qualitative test for unsaturation.
- When an alkene is treated with Baeyer's reagent, the deep purple color of the permanganate ion () discharges, accompanied by the formation of a dark brown precipitate of manganese dioxide ().
- Chemically, the alkene undergoes syn-dihydroxylation across the double bond to yield a vicinal diol (glycol). For example, ethylene is oxidized under mild alkaline conditions to ethylene glycol (1,2-ethanediol):
- While a positive Baeyer's test indicates unsaturation, it is not strictly specific to alkenes, as alkynes and aldehydes can also reduce permanganate.
Specialized Alkene Reactions and Industrial Applications
Alkylation Reactions in Petroleum Refining:
- Alkylation involves the acid-catalyzed chemical addition of an isoparaffin (branched alkane, such as isobutane/2-methylpropane) across an alkene (such as isobutene or propene) in the presence of strong acid catalysts ( or anhydrous ) at controlled temperatures.
- The product is a highly branched alkane mixture, primarily 2,2,4-trimethylpentane (isooctane):
- Highly branched alkanes possess high research octane numbers () and burn cleanly without premature engine detonation (knocking), making them valuable blending components in commercial motor gasolines.
Allylic Substitution:
- An allylic carbon is a saturated (-hybridized) carbon atom situated directly adjacent to a carbon-carbon double bond ().
- Under specialized high-temperature conditions () or via photochemically initiated radical halogenation at low halogen concentrations, substitution occurs preferentially at the allylic position rather than addition across the double bond:
- Allylic radicals are stabilized by resonance, delocalizing the unpaired electron over three contiguous orbitals: , which lowers the activation energy for allylic hydrogen abstraction.
Major Commercial and Industrial Uses of Alkenes:
- Ethylene (Ethene):
- Utilized in the commercial agriculture sector as an artificial plant hormone to accelerate the synchronized ripening of picked fruits (e.g., bananas, tomatoes).
- Serves as the primary petrochemical monomer for producing polyethylene plastics (LDPE and HDPE).
- Feedstock for the industrial synthesis of ethylene glycol (automotive antifreeze and polyester precursor), ethanol, and ethylene oxide.
- Historically utilized in clinical medicine as an inhalational general anesthetic.
- Propylene (Propene):
- Polymerized to produce polypropylene plastics for fibers, automotive packaging, and durable consumer goods.
- Converted via acid hydration into isopropyl alcohol (rubbing alcohol) and oxidized to synthesize acetone, propylene oxide, and acrolein.
- Butenes:
- Utilized as monomers and co-monomers in the manufacture of polybutene, synthetic polybutadiene rubbers, and alkylate blending stocks for aviation and automotive fuels.
Homologues and Isomers of Butene ():
- 1-Butene (): A straight-chain terminal alkene with the double bond at carbon 1.
- 2-Butene (): An internal straight-chain alkene that exists as two distinct geometric stereoisomers:
- Cis-2-butene: Both terminal methyl groups reside on the same side of the double bond.
- Trans-2-butene: The terminal methyl groups reside on opposite sides of the double bond.
- 2-Methylpropene (, commonly termed isobutene or isobutylene): A branched chain constitutional isomer of the linear butenes.
Cycloalkenes, Alkadienes, and Rubber Polymers
Cycloalkenes:
- Cyclic aliphatic hydrocarbons containing at least one carbon-carbon double bond within the closed ring system.
- Monocyclic cycloalkenes containing a single double bond possess the general formula , containing two fewer hydrogen atoms than open-chain mono-alkenes (). For example, cyclohexene has the molecular formula , whereas open-chain 1-hexene has the formula .
- Nomenclature: The prefix "cyclo-" designates the closed ring, while the suffix "-ene" indicates the presence of the double bond. The ring is numbered so that the double bond carbons are sequentially assigned positions 1 and 2, with numbering proceeding in the direction that assigns the lowest possible locants to any attached substituents.
Alkadienes (Diolefins):
- Unsaturated aliphatic hydrocarbons containing two distinct carbon-carbon double bonds, designated by the suffix "-diene".
- Open-chain alkadienes containing two double bonds share the general formula , which is identical to the general formula for open-chain alkynes containing a single triple bond. Consequently, open-chain alkadienes and alkynes of equal carbon number are constitutional isomers.
Structural Classes of Alkadienes:
- Cumulated Dienes (Allenes):
- Double bonds share a common central carbon atom (), requiring the central carbon to adopt linear, -hybridized geometry with perpendicular orbitals.
- The simplest member is propadiene (), which is historically named allene. Another example is 1,2-butadiene ().
- Conjugated Dienes:
- Double bonds are separated by exactly one carbon-carbon single bond ().
- The benchmark example is 1,3-butadiene ().
- In conjugated systems, the four parallel, contiguous orbitals overlap continuously, enabling the four electrons to delocalize across all four carbon atoms.
- Thermodynamic Stability: Delocalization stabilizes conjugated dienes relative to isolated dienes, lowering their internal energy and shortening the intervening single bond ( compared to a standard single bond). 1,3-Butadiene adopts a stable, planar conformation.
- Isolated (Non-conjugated) Dienes:
- Double bonds are separated by two or more saturated single () bonds ().
- An example is 1,5-hexadiene ().
- The double bonds are isolated by intervening -hybridized carbons that prevent orbital overlap, causing each double bond to behave as an independent alkene unit.
Addition Reactions of Conjugated Dienes:
- Conjugated dienes display 1,2-addition and 1,4-addition pathways due to the resonance-stabilized allylic carbocation intermediate formed upon initial electrophilic attack.
- Numbering the four conjugated carbons as 1 through 4, addition of one equivalent of a reagent (such as bromine, ) yields two products:
- 1,2-Addition: Incoming atoms attach across carbons 1 and 2, leaving the remaining double bond at the 3,4 position:
- 1,4-Addition: Incoming atoms attach at the terminal carbons 1 and 4, while the remaining double bond shifts to the central 2,3 position:
- The product ratio depends on reaction conditions: low temperatures typically favor the 1,2-addition product (the kinetically controlled product), whereas higher temperatures favor the more substituted, thermodynamically stable 1,4-addition product.
Isoprene and Natural Rubber Chemistry:
- Isoprene is the common name for 2-methyl-1,3-butadiene (), a volatile, conjugated diene hydrocarbon.
- Natural rubber is an elastomeric biopolymer derived from the milky sap (latex) of rubber trees, composed of thousands of repeating isoprene units.
- Structurally, natural rubber consists almost exclusively of cis-1,4-polyisoprene, formed through stereoregular 1,4-addition polymerizations that leave all methyl groups and chain segments arranged on the same side of the internal double bonds.
- This cis spatial configuration imparts flexibility and high elastic recovery, whereas the corresponding trans isomer (gutta-percha) packs into a rigid, non-elastic crystalline material.
- Thermal decomposition or retorting of raw natural rubber induces depolymerization, releasing volatile isoprene monomers.