Introductory Physics for Medical Sciences Exam Guide
Examination Structure and Assessment Rules
Course & Administrative Details:
- Institution: The University of Zambia, School of Natural Sciences, Department of Physics.
- Course Code & Title: PHY1015: Introductory Physics for Medical Sciences.
- Session: 2023/2024 University Examinations.
- Duration: 3 Hours.
- Maximum Total Score: 100 Marks.
General Instructions:
- The paper consists of 7 total questions, each valued at 20 marks.
- Candidates must attempt exactly 5 questions.
- Computer numbers must be clearly written on all answer sheets and bound together using the string provided in the examination venue prior to submission.
- Physical constants and formulas are provided on the back page of the examination paper for reference.
Section A Marking Criteria:
- Question 1 (Q1) is compulsory and contains 10 multiple-choice questions (labelled A through J).
- Correct Answer: marks given.
- Wrong Answer: marks deducted (negative marking applied).
- No Answer: marks.
- Submission Format: Mark choices with a cross (X) on the dedicated multiple-choice answer sheet.
Section B Guidelines:
- Candidates must choose and answer any four (4) questions from Section B.
- All calculations, derivations, and intermediate steps must be explicitly shown to receive credit.
Section A: Multiple-Choice Questions and Worked Solutions
Question 1(A): Unit Conversion of Mass
- Problem Statement: The mass of a parasitic wasp can be as small as . Express this mass in micrograms ().
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Correct Answer: (c)
Question 1(B): Kinematics of Average Speed
- Problem Statement: A motorist travels at and then at . What is the average speed of the motorist for the entire trip?
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Time for segment 1:
- Time for segment 2:
- Total distance:
- Total time:
- Average speed:
- Correct Answer: (b)
Question 1(C): Impulse and Linear Momentum
- Problem Statement: A force acts on a body moving with an initial momentum of . Find the body's final momentum after seconds.
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Impulse formula:
- Correct Answer: (d)
Question 1(D): Resolution of Two-Dimensional Velocity Vectors
- Problem Statement: A dolphin leaps out of the water at an angle of above the horizontal. Find its vertical component of velocity if its horizontal component is .
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Correct Answer: (d)
Question 1(E): Maximum Resultant of Two Vector Forces
- Problem Statement: The magnitude of the resultant of two forces is at maximum when the angle between them is:
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Resultant force equation:
- is maximized when , which corresponds to (parallel forces).
- Correct Answer: (b)
Question 1(F): SI Definition of Force Unit
- Problem Statement: A force that produces an acceleration of on a mass of is referred to as:
- Options:
- (a) Friction
- (b) Weight
- (c) Newton
- (d) Reaction
- Detailed Derivation:
- By Newton's Second Law (), . Therefore, this unit of force is defined as the Newton.
- Correct Answer: (c) Newton
Question 1(G): Classification of Collision Types
- Problem Statement: What is a collision called when colliding bodies are deformed?
- Options:
- (a) Elastic collision
- (b) Inelastic collision
- (c) Perfect elastic collision
- (d) Perfect inelastic collision
- Theoretical Explanation:
- In elastic collisions, kinetic energy is conserved and no permanent structural deformation occurs.
- When colliding bodies undergo deformation, mechanical kinetic energy is transformed into internal strain energy and heat, defining an inelastic collision.
- Correct Answer: (b) Inelastic collision
Question 1(H): Relationship Between Momentum and Kinetic Energy
- Problem Statement: Find the momentum of a body of mass with Kinetic energy of .
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Kinetic energy relation:
- Converting units:
- Correct Answer: (c)
Question 1(I): Dimensional Units of Power
- Problem Statement: What is the unit for power?
- Options:
- (a)
- (b)
- (c)
- (d)
- Detailed Derivation:
- Power is defined as work per unit time:
- Units of : , which is equivalent to Joules per second () or Watts ().
- Correct Answer: (c)
Question 1(J): Symmetric Kinematics of Vertical Motion
- Problem Statement: For a body thrown upwards, the time it takes to rise is the same as the time it takes to fall because:
- Options:
- (a) its mass changes as it goes up and falls down.
- (b) the body experiences the same value of air resistance in both directions.
- (c) rate at which it decelerates upwards is the same rate it accelerates downwards.
- (d) rate at which it decelerates downwards is the same rate it accelerates upwards.
- Theoretical Explanation:
- In free fall under gravity (neglecting variable drag), the magnitude of constant downward gravitational acceleration dictates both upward deceleration and downward acceleration identically.
- Correct Answer: (c) rate at which it decelerates upwards is the same rate it accelerates downwards.
Section B: Analytical Problems and Comprehensive Solutions
Question 2: Vector Mechanics, Kinematic Pursuit, and Elevator Physics
- Part (a) Vector Component Analysis:
- Given vector components: and .
- (i) Calculation of Magnitude :
- (ii) Calculation of Direction Relative to Positive x-axis:
- Since and , vector lies in Quadrant II.
- Reference angle
- Standard position angle
- Part (b) Two-Body Motion and Chase Problem:
- Scenario: A car moving at constant speed passes a stationary police car. The police car accelerates uniformly to in and maintains until overtaking the car.
- Police Car Acceleration Phase ():
- Distance covered in phase 1:
- Police Car Constant Velocity Phase ():
- Let total elapsed time to catch up be .
- Distance covered in phase 2:
- Total police distance:
- Civilian Car Motion:
- Total distance:
- Overtake Condition ():
- Total Distance Traveled by Police Car:
- Part (c) Apparent Weight in an Accelerating System:
- Scenario: Bag of mass placed on a balance in an elevator accelerating upward at .
- Free-Body Equation:
- Calculation (using ):
- Part (a) Vector Component Analysis:
Question 3: Crash Test Impulse, Impact Dynamics, and Work
- Part (a) Collision Dynamics of a Vehicle:
- Scenario: A car collides with a rigid wall at an initial velocity of and rebounds at . Collision duration .

- (i) Impulse Delivered to Car:
- Taking initial direction as positive (), rebound direction is .
- Magnitude of impulse = directed away from the wall.
- (ii) Average Force During Impact:
- Part (b) Work Done by Applied Pulling Force:
- Scenario: A box is pulled across a horizontal floor at constant speed () by a force angled at above the positive x-axis. Kinetic friction force . Displacement .
- Equilibrium Analysis:
- Work Calculation:
- Part (a) Collision Dynamics of a Vehicle:
Question 4: Dimensional Conversion, Kinematics, and Variable Parameter Analysis
- Part (a) Metric Prefix Conversion:
- Convert to Gigalitres (GL).
- In GL:
- Part (b) Horizontal Projectile Final Speed:
- Scenario: A ball rolls off a cliff horizontally with and . Vertical drop .
- Vertical Velocity component upon impact:
- Total Resultant Speed:
- Part (c) Three-Stage Ambulance Motion:
- Stage 1: Accelerates from rest to in seconds.
- Stage 2: Constant speed of for seconds.
- Stage 3: Decelerates from to rest in seconds.
- Total Distance Relationship:
- Stage 1: Accelerates from rest to in seconds.
- Part (a) Metric Prefix Conversion:
Question 5: Volcanic Projectile Motion and Surface Friction
- Part (a) Volcanic Rock Time of Flight:
- Scenario: Rock ejected with speed at above horizontal, landing at vertical position relative to point of release. Use g = 9.8\,\text{m/s}^2$.\n * \n * *Initial Vertical Velocity Component*:\n * v_{0y} = v_0 \times \sin(35^\circ) = 25 \times 0.573576 = 14.339\,\text{m/s}\n * *Kinematic Displacement Equation*:\n * y = v_{0y} t - \frac{1}{2} g t^2\n * -20 = 14.339 t - 4.9 t^2 \implies 4.9 t^2 - 14.339 t - 20 = 0\n * *Quadratic Formula Solution*:\n * t = \frac{-(-14.339) \pm \sqrt{(-14.339)^2 - 4(4.9)(-20)}}{2(4.9)}\n * t = \frac{14.339 \pm \sqrt{205.61 + 392}}{9.8} = \frac{14.339 \pm \sqrt{597.61}}{9.8}\n * t = \frac{14.339 + 24.446}{9.8} = \frac{38.785}{9.8} \approx 3.96\,\text{seconds}\n * **Part (b) Horizontal Pushing and Kinetic Friction Dynamics**:\n * *Scenario*: A worker pushes a 55\,\text{kg}F = 0.220\,\text{kN} = 220\,\text{N}\mu_k = 0.35.\n * *Normal Force Calculation*:\n * N = m g = 55\,\text{kg} \times 9.8\,\text{m/s}^2 = 539\,\text{N}\n * *Kinetic Friction Force*:\n * f_k = \mu_k N = 0.35 \times 539\,\text{N} = 188.65\,\text{N}\n * *Net Force and Acceleration*:\n * F_{\text{net}} = F - f_k = 220\,\text{N} - 188.65\,\text{N} = 31.35\,\text{N}\n * a = \frac{F_{\text{net}}}{m} = \frac{31.35\,\text{N}}{55\,\text{kg}} \approx 0.57\,\text{m/s}^2$$
- Part (a) Volcanic Rock Time of Flight: