Electronic Devices and Circuits: Semiconductor Physics Notes (copy)

Course Overview and Syllabus

  • Core Subject: Electronic Devices and Circuits (EDC)

  • Discipline: Electronics and Communication Engineering

  • Primary Module: Semiconductor Physics (Lecture 01)

  • Comprehensive Syllabus:

    • Semiconductor Physics

    • PN Junction Diode and Special Diode

    • MOS Capacitor

    • MOSFET

    • BJT

    • JFET (specifically included for ESE)

    • Hall Effect

    • Schottky Diode

  • Course Pedagogy and Assessment Structure:

    • Regular Notes Revision

    • Practice Sheets

    • Weekly Tests (Chapter End Tests)

  • Recommended Reference Textbooks:

    • Solid State Electronic Devices by Streetman and Banerjee

    • SEMICONDUCTOR DEVICES: Physics and Technology by S.M. Sze

    • Semiconductor Physics and Devices by Donald A. Neamen

Fundamental Concepts of Mass and Charge

  • Definition of Mass:

    • Mass is the fundamental intrinsic property of an object responsible for gravitational force of attraction.

  • Definition of Charge:

    • Charge is the fundamental property of a subatomic particle responsible for electrostatic forces.

    • Electrostatic forces can be attractive or repulsive depending on the nature of the charges involved:

    • Like Charges: Two positive charges (+q+q and +q+q) exert a repulsive force on each other.

    • Unlike Charges: A positive charge (+q+q) and a negative charge (−q-q) exert an attractive force on each other.

Classification of Electrical vs. Electronics Engineering

  • Definition of Electronics:

    • Electronics is defined as the study of the motion and behavior of charge carriers inside a semiconductor material.

  • Comparison of Engineering Domains:

    • Electrical Engineering: Focuses on high power and low frequency applications.

    • Electronics Engineering: Focuses on low power and high frequency applications.

Classical Physics Analysis of Orbital Electron Motion

  • Physical Model Setup:

    • A positively charged nucleus carrying charge +q+q (or +e+e) is located at the center.

    • An electron carrying negative charge −q-q (or −e-e) orbits the nucleus at a radial distance rr with velocity vv.

  • Force Equilibrium in Radial Direction:

    • For stable continuous circular motion, the net force in the radial direction must be zero:     ∑F=0\sum F = 0

    • The sum of the outward centrifugal force and the inward centripetal Coulombic force of attraction must balance:     Centrifugal Force+Centripetal Force=0\text{Centrifugal Force} + \text{Centripetal Force} = 0     mv2r+(−e24πε0r2)=0\frac{m v^2}{r} + \left(-\frac{e^2}{4\pi\varepsilon_0 r^2}\right) = 0     mv2r=e24πε0r2\frac{m v^2}{r} = \frac{e^2}{4\pi\varepsilon_0 r^2}

    • Multiplying both sides by rr yields Equation (1):     mv2=e24πε0rm v^2 = \frac{e^2}{4\pi\varepsilon_0 r}

Energy Properties of Charge Carriers

  • Total Energy (ETE_T) Formulation:

    • The total energy of an orbiting electron is the sum of its Kinetic Energy (K.E.K.E.) and Potential Energy (P.E.P.E.):     ET=K.E.+P.E.E_T = K.E. + P.E.

    • Kinetic Energy:     K.E.=12mv2=e28πε0rK.E. = \frac{1}{2} m v^2 = \frac{e^2}{8\pi\varepsilon_0 r}

    • Potential Energy:     P.E.=Electric Potential×Charge=(e4πε0r)×(−e)=−e24πε0rP.E. = \text{Electric Potential} \times \text{Charge} = \left(\frac{e}{4\pi\varepsilon_0 r}\right) \times (-e) = -\frac{e^2}{4\pi\varepsilon_0 r}

    • Total Energy Expression (Equation 2):     ET=e28πε0r+(−e24πε0r)=−e28πε0r JoulesE_T = \frac{e^2}{8\pi\varepsilon_0 r} + \left(-\frac{e^2}{4\pi\varepsilon_0 r}\right) = -\frac{e^2}{8\pi\varepsilon_0 r}\,\text{Joules}

  • Energy Dependence on Radial Distance:

    • As the distance rr from the nucleus increases, the term −e28πε0r-\frac{e^2}{8\pi\varepsilon_0 r} becomes less negative (closer to zero).

    • Consequently, both Potential Energy (P.E.P.E.) and Total Energy (ETE_T) of an electron increase as it moves farther away from the nucleus.

  • Spatial Orientation of Electron and Hole Energy Levels:

    • When the nucleus is referenced at the bottom of the energy diagram:

    • Total energy and potential energy of electrons increase in the upward spatial direction.

    • Conduction band edge (EcE_c) corresponds to high potential energy states for electrons.

    • Potential energy of holes increases in the downward spatial direction toward the valence band edge (EvE_v).

Bohr's Atomic Model and Postulates

  • Failure of Classical Electromagnetism:

    • According to classical electromagnetic theory, any accelerating charge continuously radiates energy.

    • An orbiting electron experiences centripetal acceleration and should continuously lose energy, causing its orbital radius rr to shrink continuously until it falls into the nucleus.

  • Bohr's Three Postulates:

    • First Postulate: Electrons do not possess a continuous energy spectrum as defined by classical equations. Instead, they move in specific allowed stationary energy states (orbitals) without radiating energy.

    • Second Postulate: Energy is radiated or absorbed only when an electron transitions from one allowed energy level (E2E_2) to another (E1E_1):     E=E2−E1=hν=hcλE = E_2 - E_1 = h\nu = \frac{hc}{\lambda}     λ=hcE\lambda = \frac{hc}{E}

    • Where Planck's constant h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\,\text{J}\cdot\text{s}, and speed of light c=3×108 m/sc = 3 \times 10^8\,\text{m/s}.

    • Conversion unit: 1 eV=1.6×10−19 Joules1\,\text{eV} = 1.6 \times 10^{-19}\,\text{Joules}.

    • Wavelength calculation short-cut formulas:       λ=12400E (in eV) A˚\lambda = \frac{12400}{E\,\text{(in eV)}}\,\text{\AA}       λ=1.24E (in eV) μm\lambda = \frac{1.24}{E\,\text{(in eV)}}\,\mu\text{m}

    • Third Postulate: The angular momentum (mvrm v r) of an orbiting electron is quantized and must equal an integer multiple of h2π\frac{h}{2\pi}:     mvr=nh2πm v r = \frac{n h}{2\pi}

    • Where nn is the principal quantum number (n=1,2,3,…n = 1, 2, 3, \dots).

Mathematical Derivations of Orbital Radius and Energy Levels

  • Derivation of Quantized Orbital Radius (rr):

    • From angular momentum quantization:     mv=nh2πrm v = \frac{n h}{2\pi r}     m2v2=n2h24π2r2m^2 v^2 = \frac{n^2 h^2}{4\pi^2 r^2}

    • From force equilibrium Equation (1):     mv2=e24πε0rm v^2 = \frac{e^2}{4\pi\varepsilon_0 r}     m2v2=me24πε0rm^2 v^2 = \frac{m e^2}{4\pi\varepsilon_0 r}

    • Equating both equations for m2v2m^2 v^2:     n2h24π2r2=me24πε0r\frac{n^2 h^2}{4\pi^2 r^2} = \frac{m e^2}{4\pi\varepsilon_0 r}     n2h2πr=me2ε0\frac{n^2 h^2}{\pi r} = \frac{m e^2}{\varepsilon_0}     r=ε0n2h2πme2r = \frac{\varepsilon_0 n^2 h^2}{\pi m e^2}

  • Derivation of Quantized Energy (ETE_T):

    • Substituting the expression for rr into Total Energy ET=−e28πε0rE_T = -\frac{e^2}{8\pi\varepsilon_0 r}:     ET=−e28πε0(ε0n2h2πme2)E_T = -\frac{e^2}{8\pi\varepsilon_0 \left(\frac{\varepsilon_0 n^2 h^2}{\pi m e^2}\right)}     ET=−me48ε02h2n2E_T = -\frac{m e^4}{8 \varepsilon_0^2 h^2 n^2}

  • Numerical Constant Substitution:

    • Mass of electron m=9.1×10−31 kgm = 9.1 \times 10^{-31}\,\text{kg}

    • Electronic charge e=1.6×10−19 Ce = 1.6 \times 10^{-19}\,\text{C}

    • Permittivity of free space ε0=8.85×10−12 F/m\varepsilon_0 = 8.85 \times 10^{-12}\,\text{F/m}

    • Planck's constant h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\,\text{J}\cdot\text{s}

    • Converting Joules to electron-volts (1 J=10191.6 eV1\,\text{J} = \frac{10^{19}}{1.6}\,\text{eV}):     ET=−13.6n2 eVE_T = -\frac{13.6}{n^2}\,\text{eV}

Energy Level Diagram of Hydrogen Atom

  • Quantized Energy States for Hydrogen:

    • For n=1n = 1 (First orbit / Ground state):     E1=−13.6 eVE_1 = -13.6\,\text{eV}

    • For n=2n = 2 (Second orbit):     E2=−13.622=−3.4 eVE_2 = -\frac{13.6}{2^2} = -3.4\,\text{eV}

    • For n=3n = 3 (Third orbit):     E3=−13.632=−1.51 eVE_3 = -\frac{13.6}{3^2} = -1.51\,\text{eV}

    • For n=∞n = \infty (Free electron level):     E∞=0 eVE_\infty = 0\,\text{eV}

  • Key Takeaway: An isolated single atom exhibits strictly discrete, well-separated energy levels.

Interaction of Atoms and Energy Band Formation

  • Interaction Between Two Hydrogen Atoms:

    • When two isolated Hydrogen atoms are situated far apart, both possess identical ground state energy levels at −13.6 eV-13.6\,\text{eV}.

    • As the two atoms are brought close together, their electronic wavefunctions overlap, causing interatomic interaction.

    • Due to the Pauli Exclusion Principle, the identical single energy level splits into two closely spaced discrete energy levels near −13.6 eV-13.6\,\text{eV}.

  • Formation of Energy Bands in Solids (NN Interacting Atoms):

    • When NN individual atoms come together to form a solid crystal lattice:

    • Electron wavefunctions of neighboring atoms overlap significantly.

    • Each discrete atomic energy level splits into NN closely spaced energy levels.

    • Due to the extremely large number of atoms NN in a solid, these closely spaced energy levels form a continuous energy band (a dense collection or group of energy states).

    • Summary of Transition:

    • Far Away: Discrete individual atomic energy levels.

    • Close Interatomic Distance: Wavefunction interaction leading to energy level splitting and energy band formation.