Motion in Two Dimensions: Complete Encyclopedic Study Guide

Fundamentals of Two-Dimensional Motion

The motion of an object is classified as two-dimensional if two of the three spatial coordinates required to specify its position change with respect to time. In two-dimensional motion, the body is constrained to move within a plane. Examples of two-dimensional motion include a billiard ball rolling across a billiard table, an insect crawling across the flat floor of a room, and the Earth revolving around the Sun in its orbital plane.

Two primary physical cases of motion in two dimensions are:

  1. Projectile Motion

  2. Circular Motion

Concept and Assumptions of Projectile Motion

When a force acting on a particle is oblique (at an angle other than 0∘0^\circ or 180∘180^\circ) relative to its initial velocity vector, the particle follows a curved path in a plane. This motion under constant vertical acceleration is termed projectile motion.

Consider a classic conceptual scenario: a hunter aims a gun directly at a monkey sitting on a distant tree branch. If the monkey remains stationary, the bullet will miss because gravity deflects the bullet downward from the straight sightline into a parabolic path. However, if the monkey lets go of the branch at the exact instant the bullet leaves the muzzle, both the monkey and the bullet experience identical downward vertical acceleration gg. Both drop by an identical vertical distance 12gt2\frac{1}{2} g t^2 in time tt. Consequently, the bullet will hit the monkey regardless of the initial muzzle speed, provided the bullet reaches the horizontal coordinate of the tree before hitting the ground.

Hunter firing at monkey

A projectile is defined as any body given an initial velocity that subsequently moves freely through the atmosphere under the influence of gravity alone, without internal self-propulsion or fuel consumption. Examples include a bomb released from a level-flying aircraft, a bullet fired from a gun, an arrow shot from a bow, and a javelin thrown by an athlete.

To simplify the mathematical modeling of projectile motion, four idealizing assumptions are made:

  1. Air resistance and atmospheric drag forces are entirely negligible.

  2. The curvature of the Earth's surface is negligible over the range of flight.

  3. The rotational effects of the Earth (such as the Coriolis force) are negligible.

  4. The acceleration due to gravity gg remains strictly constant in both magnitude and direction across all points of the trajectory.

Principles of Physical Independence of Motions and Projectile Types

Because projectile motion occurs in two dimensions, it satisfies the Principle of Physical Independence of Motions. This principle states that a two-dimensional motion can be completely decomposed into two mutually perpendicular, independent one-dimensional motions: horizontal motion along the XX-axis and vertical motion along the YY-axis.

When a particle is projected with initial speed uu at an angle θ\theta to the horizontal:

  • The horizontal component of initial velocity is ux=ucos⁡(θ)u_x = u \cos(\theta).

  • The vertical component of initial velocity is uy=usin⁡(θ)u_y = u \sin(\theta).

Throughout the flight, no horizontal force acts on the projectile (ax=0a_x = 0), assuming zero air resistance. Therefore, the horizontal component of velocity ux=ucos⁡(θ)u_x = u \cos(\theta) remains constant in speed and direction. The horizontal motion is uniform recti-linear motion.

Conversely, gravity exerts a constant downward force (ay=−ga_y = -g). The vertical velocity component uyu_y undergoes uniform deceleration during ascent until it becomes zero at the apex of the motion, followed by uniform acceleration during descent. Thus, vertical motion is uniformly accelerated/retarded motion.

Three standard types of projectile motion exist:

  1. Oblique Projectile Motion (launched at an angle from ground level or elevated planes)

  2. Horizontal Projectile Motion (launched horizontally from an elevated height)

  3. Projectile Motion on an Inclined Plane

Oblique Projectile Motion: Trajectory and Displacement

In oblique projectile motion, a body is launched from the ground with velocity uu at an angle θ\theta above the horizontal line.

Oblique projectile trajectory

During flight, the horizontal velocity component ucos⁡(θ)u \cos(\theta), vertical downward acceleration gg, and total mechanical energy remain strictly constant. In contrast, the overall speed, total velocity vector, vertical velocity component usin⁡(θ)u \sin(\theta), linear momentum, kinetic energy, and potential energy continuously change.

To derive the trajectory equation, establish orthogonal coordinate axes with the origin OO at the projection point:

  • Horizontal displacement after time tt: x=(ucos⁡(θ))t  ⟹  t=xucos⁡(θ)x = (u \cos(\theta)) t \implies t = \frac{x}{u \cos(\theta)}

  • Vertical displacement after time tt: y=(usin⁡(θ))t−12gt2y = (u \sin(\theta)) t - \frac{1}{2} g t^2

Substituting tt into the vertical equation yields: y=(usin⁡(θ))(xucos⁡(θ))−12g(xucos⁡(θ))2y = (u \sin(\theta)) \left(\frac{x}{u \cos(\theta)}\right) - \frac{1}{2} g \left(\frac{x}{u \cos(\theta)}\right)^2

y=xtan⁡(θ)−gx22u2cos⁡2(θ)y = x \tan(\theta) - \frac{g x^2}{2 u^2 \cos^2(\theta)}

This equation matches the standard parabolic form y=ax−bx2y = a x - b x^2, where a=tan⁡(θ)a = \tan(\theta) and b=g2u2cos⁡2(θ)b = \frac{g}{2 u^2 \cos^2(\theta)}. Thus, the trajectory of a projectile is parabolic.

Alternatively, expressing the trajectory in terms of horizontal range R=u2sin⁡(2θ)gR = \frac{u^2 \sin(2 \theta)}{g} gives: y=xtan⁡(θ)(1−xR)y = x \tan(\theta) \left(1 - \frac{x}{R}\right)

At any instant tt, the position vector r\mathbf{r} relative to the origin is: r=xi^+yj^=(ucos⁡(θ)t)i^+(usin⁡(θ)t−12gt2)j^\mathbf{r} = x \hat{i} + y \hat{j} = (u \cos(\theta) t) \hat{i} + \left(u \sin(\theta) t - \frac{1}{2} g t^2\right) \hat{j}

The magnitude of displacement rr from the origin is: r=x2+y2=ut1+(gt2u)2−gtsin⁡(θ)ur = \sqrt{x^2 + y^2} = u t \sqrt{1 + \left(\frac{g t}{2 u}\right)^2 - \frac{g t \sin(\theta)}{u}}

The angle ϕ\phi of the displacement vector with the horizontal is: tan⁡(ϕ)=yx=tan⁡(θ)−gt2ucos⁡(θ)1=tan⁡(θ)−gt2ucos⁡(θ)\tan(\phi) = \frac{y}{x} = \frac{\tan(\theta) - \frac{g t}{2 u \cos(\theta)}}{1} = \tan(\theta) - \frac{g t}{2 u \cos(\theta)}

For the apex (highest point) of the trajectory, the displacement angle ϕ\phi is directly related to the launch angle θ\theta by: tan⁡(ϕ)=12tan⁡(θ)\tan(\phi) = \frac{1}{2} \tan(\theta)

Instantaneous Velocity, Momentum, and Angular Momentum

The instantaneous velocity v\mathbf{v} at time tt is tangential to the parabolic path at position P(x,y)P(x, y). Its orthogonal components are: vx=ucos⁡(θ)v_x = u \cos(\theta) vy=usin⁡(θ)−gtv_y = u \sin(\theta) - g t

The velocity vector is: v=(ucos⁡(θ))i^+(usin⁡(θ)−gt)j^\mathbf{v} = (u \cos(\theta)) \hat{i} + (u \sin(\theta) - g t) \hat{j}

Its magnitude (speed) at time tt is: v=vx2+vy2=u2cos⁡2(θ)+(usin⁡(θ)−gt)2=u2+g2t2−2ugtsin⁡(θ)v = \sqrt{v_x^2 + v_y^2} = \sqrt{u^2 \cos^2(\theta) + (u \sin(\theta) - g t)^2} = \sqrt{u^2 + g^2 t^2 - 2 u g t \sin(\theta)}

The inclination angle α\alpha of the velocity vector relative to the horizontal at time tt is: tan⁡(α)=vyvx=usin⁡(θ)−gtucos⁡(θ)=tan⁡(θ)−gtsec⁡(θ)u\tan(\alpha) = \frac{v_y}{v_x} = \frac{u \sin(\theta) - g t}{u \cos(\theta)} = \tan(\theta) - \frac{g t \sec(\theta)}{u}

Velocity and momentum changes between key trajectory points:

  • Between launch point and maximum height:

    • Initial velocity: ui=(ucos⁡(θ))i^+(usin⁡(θ))j^\mathbf{u}_i = (u \cos(\theta)) \hat{i} + (u \sin(\theta)) \hat{j}

    • Apex velocity: uf=(ucos⁡(θ))i^+0j^\mathbf{u}_f = (u \cos(\theta)) \hat{i} + 0 \hat{j}

    • Change in velocity: Δu=uf−ui=−(usin⁡(θ))j^\Delta \mathbf{u} = \mathbf{u}_f - \mathbf{u}_i = - (u \sin(\theta)) \hat{j}

    • Change in momentum: Δp=−(musin⁡(θ))j^\Delta \mathbf{p} = - (m u \sin(\theta)) \hat{j}

  • Between launch point and landing point (complete flight at equal vertical level):

    • Impact velocity: uf=(ucos⁡(θ))i^−(usin⁡(θ))j^\mathbf{u}_f = (u \cos(\theta)) \hat{i} - (u \sin(\theta)) \hat{j}

    • Overall change in velocity: Δu=−(2usin⁡(θ))j^\Delta \mathbf{u} = - (2 u \sin(\theta)) \hat{j}

    • Overall change in momentum: $Delta \mathbf{p} = - (2 m u \sin(\theta)) \hat{j}\n\nThe angular momentum L of the projectile at its highest point, calculated relative to the point of projection origin, is:\nL = m v_x H = m (u \cos(\theta)) \left(\frac{u^2 \sin^2(\theta)}{2 g}\right) = \frac{m u^3 \sin^2(\theta) \cos(\theta)}{2 g}\n\n# Time of Flight, Horizontal Range, and Maximum Height\n\n1. Time of Flight (T):\nTisthetotaltimeelapsedfromprojectionuntiltheprojectilereturnstoitsinitialhorizontalplane.Settingverticaldisplacementis the total time elapsed from projection until the projectile returns to its initial horizontal plane. Setting vertical displacementy = 0:\ny = (u \sin(\theta)) T - \frac{1}{2} g T^2 = 0 \implies T = \frac{2 u \sin(\theta)}{g} = \frac{2 u_y}{g}\n\nFor complementary projection angles \thetaandand90^\circ - \theta with identical launch speeds:\n\frac{T_1}{T_2} = \frac{\sin(\theta)}{\sin(90^\circ - \theta)} = \tan(\theta)\nT_1 T_2 = \left(\frac{2 u \sin(\theta)}{g}\right) \left(\frac{2 u \cos(\theta)}{g}\right) = \frac{2}{g} \left(\frac{u^2 \sin(2 \theta)}{g}\right) = \frac{2 R}{g}\n\nIf t_1isthetimetoreachagivenheightis the time to reach a given heighthduringascentandduring ascent andt_2 is the time taken from that height to fall to the ground:\nt_1 + t_2 = T = \frac{2 u \sin(\theta)}{g}\nh = \frac{1}{2} g t_1 t_2\n\nIf t_1andandt_2representthetimeintervalsseparatingtwoidenticalheightlevelsrepresent the time intervals separating two identical height levelsh_1andandh_2 on the upward and downward branches, then:\nt_2^2 - t_1^2 = \frac{8 h}{g}\n\n2. Horizontal Range (R):\nRisthetotalhorizontaldistancetraveledduringthetimeofflightis the total horizontal distance traveled during the time of flightT:\nR = u_x T = (u \cos(\theta)) \left(\frac{2 u \sin(\theta)}{g}\right) = \frac{u^2 \sin(2 \theta)}{g} = \frac{2 u_x u_y}{g}\n\nComplementary launch angles \thetaandand\theta' = 90^\circ - \thetayieldidenticalhorizontalrangesforthesamelaunchspeed,sinceyield identical horizontal ranges for the same launch speed, since\sin(2(90^\circ - \theta)) = \sin(180^\circ - 2 \theta) = \sin(2 \theta).Angles. Angles\theta_1 = 45^\circ - \alphaandand\theta_2 = 45^\circ + \alpha are also complementary and yield equal ranges.\n\nMaximum range occurs when \sin(2 \theta) = 1 \implies 2 \theta = 90^\circ \implies \theta = 45^\circ:\nR_{\text{max}} = \frac{u^2}{g}\n\nAt maximum range (\theta = 45^\circ), the corresponding maximum height is:\nH = \frac{u^2 \sin^2(45^\circ)}{2 g} = \frac{u^2}{4 g} = \frac{R_{\text{max}}}{4}\n\nThe general mathematical relation between Range RandMaximumHeightand Maximum HeightH is:\nR = 4 H \cot(\theta)\n\nIf R = n H,then, then\tan(\theta) = \frac{4}{n}.\n- If R = H,,\theta = \tan^{-1}(4) \approx 76^\circ\n- If R = 4 H,,\theta = 45^\circ\n\nIf bullets are fired in all directions across a two-dimensional horizontal plane with speed u, the maximum area covered on the ground is:\n\text{Area} = \pi R_{\text{max}}^2 = \pi \left(\frac{u^2}{g}\right)^2 = \frac{\pi u^4}{g^2}\n\nWhen maximum heights reached for complementary launch angles are h_1andandh_2,therange, the rangeR is:\nR = 4 \sqrt{h_1 h_2}\n\n3. Maximum Height (H):\nHisthemaximumverticalelevationachievedabovethelaunchplane.Settingverticalvelocityis the maximum vertical elevation achieved above the launch plane. Setting vertical velocityv_y = 0ininv_y^2 = u_y^2 - 2 g H:\n0 = u^2 \sin^2(\theta) - 2 g H \implies H = \frac{u^2 \sin^2(\theta)}{2 g} = \frac{u_y^2}{2 g}\n\nMaximum vertical height occurs for vertical projection (\theta = 90^\circ):\nH_{\text{max}} = \frac{u^2}{2 g}\n\nFor complementary angles \thetaandand90^\circ - \theta:\n\frac{H_1}{H_2} = \frac{\sin^2(\theta)}{\sin^2(90^\circ - \theta)} = \tan^2(\theta)\nH_1 + H_2 = \frac{u^2 \sin^2(\theta)}{2 g} + \frac{u^2 \cos^2(\theta)}{2 g} = \frac{u^2}{2 g}\n\n# Energy and Relative Motion of Projectiles\n\nWhen a projectile moves upward, kinetic energy decreases as potential energy increases, while total mechanical energy remains conserved at every point along the trajectory.\n\nLet initial launch kinetic energy be K = \frac{1}{2} m u^2.Atthehighestpoint,verticalvelocityiszero,sovelocityequals. At the highest point, vertical velocity is zero, so velocity equalsu \cos(\theta).\n- Kinetic Energy at Apex (K'):\nK' = \frac{1}{2} m (u \cos(\theta))^2 = \left(\frac{1}{2} m u^2\right) \cos^2(\theta) = K \cos^2(\theta)\n\n- Potential Energy at Apex (U'):\nU' = m g H = m g \left(\frac{u^2 \sin^2(\theta)}{2 g}\right) = \frac{1}{2} m u^2 \sin^2(\theta) = K \sin^2(\theta)\n\n- Total Mechanical Energy at Apex (E):\nE = K' + U' = K \cos^2(\theta) + K \sin^2(\theta) = K\n\nRelative Motion Between Two Projectiles:\nConsider two projectiles AandandBlaunchedsimultaneouslyfromtheoriginwithinitialvelocitieslaunched simultaneously from the origin with initial velocitiesu_1andandu_2atanglesat angles\theta_1andand\theta_2.\n- Relative position coordinates:\nx = x_1 - x_2 = (u_1 \cos(\theta_1) - u_2 \cos(\theta_2)) t\ny = y_1 - y_2 = (u_1 \sin(\theta_1) - u_2 \sin(\theta_2)) t\n\n- Dividing ybybyx gives:\n\frac{y}{x} = \frac{u_1 \sin(\theta_1) - u_2 \sin(\theta_2)}{u_1 \cos(\theta_1) - u_2 \cos(\theta_2)} = \text{constant}\n\nSince \frac{y}{x}isindependentoftimeis independent of timet, the motion of one projectile as observed from another projectile is always a straight line.\n\n# Horizontal Projectile Motion\n\nA body projected horizontally with speed ufromheightfrom heighth above ground level experiences horizontal uniform motion and vertical accelerated motion under gravity.\n\n![Horizontal projectile motion](https://assets.knowt.com/pdf-flow-prod/5b03bcb3-2f70-4b18-8804-34489e20c16c-figures/22.png)\n\n1. Trajectory Equation:\nx = u t \implies t = \frac{x}{u}\ny = \frac{1}{2} g t^2 = \frac{1}{2} g \left(\frac{x}{u}\right)^2 = \frac{g x^2}{2 u^2}\nThis represents a semi-parabolic path.\n\n2. Displacement Vector (\mathbf{r}):\n\mathbf{r} = (u t) \hat{i} - \left(\frac{1}{2} g t^2\right) \hat{j}\nr = \sqrt{x^2 + y^2} = u t \sqrt{1 + \left(\frac{g t}{2 u}\right)^2}\n\n3. Instantaneous Velocity (\mathbf{v}):\nv_x = u\nv_y = - g t\nv = \sqrt{v_x^2 + v_y^2} = \sqrt{u^2 + g^2 t^2} = \sqrt{u^2 + 2 g y}\n\tan(\phi) = \frac{v_y}{v_x} = \frac{g t}{u} = \frac{\sqrt{2 g y}}{u}\n\n4. Time of Flight (T):\nh = \frac{1}{2} g T^2 \implies T = \sqrt{\frac{2 h}{g}}\n\n5. Horizontal Range (R):\nR = u T = u \sqrt{\frac{2 h}{g}}\n\n# Projectile Motion on an Inclined Plane\n\nConsider an inclined plane inclined at angle \alphatothehorizontal.Aparticleislaunchedfromtheinclinesurfacewithspeedto the horizontal. A particle is launched from the incline surface with speeduatangleat angle\theta relative to the inclined plane surface.\n\n![Projectile on an inclined plane](https://assets.knowt.com/pdf-flow-prod/5b03bcb3-2f70-4b18-8804-34489e20c16c-figures/23.png)\n\nSet reference coordinate axes parallel (X)andperpendicular() and perpendicular (Y) to the incline plane:\n- Initial velocity components: u_\parallel = u \cos(\theta),,u_\perp = u \sin(\theta)\n- Acceleration components: a_\parallel = - g \sin(\alpha),,a_\perp = - g \cos(\alpha)\n\n1. Time of Flight (T):\nSet perpendicular displacement y = 0:\ny = u_\perp T - \frac{1}{2} a_\perp T^2 = (u \sin(\theta)) T - \frac{1}{2} (g \cos(\alpha)) T^2 = 0\nT = \frac{2 u \sin(\theta)}{g \cos(\alpha)}\n\n2. Maximum Height (H) above the inclined plane:\nH = \frac{u_\perp^2}{2 a_\perp} = \frac{u^2 \sin^2(\theta)}{2 g \cos(\alpha)}\n\n3. Range (R) along the inclined plane:\nR = u_\parallel T - \frac{1}{2} g \sin(\alpha) T^2 = (u \cos(\theta)) T - \frac{1}{2} g \sin(\alpha) T^2\nSubstituting T gives:\nR = \frac{2 u^2 \sin(\theta) \cos(\theta + \alpha)}{g \cos^2(\alpha)} = \frac{u^2}{g \cos^2(\alpha)} [\sin(2 \theta + \alpha) - \sin(\alpha)]\n\n4. Maximum Range Conditions:\n- Maximum range up the incline occurs at launch angle \theta = \frac{\pi}{4} - \frac{\alpha}{2}:\nR_{\text{max, up}} = \frac{u^2}{g (1 + \sin(\alpha))}\n\n- Maximum range down the incline occurs at launch angle \theta = \frac{\pi}{4} + \frac{\alpha}{2}:\nR_{\text{max, down}} = \frac{u^2}{g (1 - \sin(\alpha))}\n\n# Variables and Kinematics of Circular Motion\n\nCircular motion is two-dimensional motion in which a body moves along a circular path under a force directed toward the center, perpendicular to its instantaneous velocity. Because the central force acts perpendicular to instantaneous displacement, zero work is done by the centripetal force; kinetic energy and speed remain constant in uniform circular motion, while velocity direction continuously changes.\n\n1. Angular Displacement (\theta):\nAngle swept by the radius vector relative to a reference axis.\n- Arc length s = r \theta\n- Linear displacement magnitude \Delta r = 2 r \sin\left(\frac{\theta}{2}\right)\n- Distance covered d = r \theta\n- Ratio of distance to displacement: \frac{d}{\Delta r} = \frac{\theta}{2 \sin\left(\frac{\theta}{2}\right)}\n\n2. Angular Velocity (\omega):\nRate of change of angular displacement:\n\omega = \frac{d\theta}{dt}\nDimensional formula is [M^0 L^0 T^{-1}],measuredin, measured in\text{rad/s}. Directed along the rotational axis via the Right-Hand Rule. Linear velocity relates vectorially as:\n\mathbf{v} = \boldsymbol{\omega} \times \mathbf{r} \implies v = r \omega\n\n3. Velocity Vector Change in Uniform Circular Motion:\nWhen a body moves along a circle of radius ratconstantspeedat constant speedvthroughanglethrough angle\theta:\n\Delta v = 2 v \sin\left(\frac{\theta}{2}\right)\nThe direction of \Delta vmakesanglemakes angle\phi = 90^\circ - \frac{\theta}{2}relativetoinitialvelocityvectorrelative to initial velocity vector\mathbf{v}1\n\n4. Time Period (T)andFrequency() and Frequency (n):\nT = \frac{1}{n} \implies \omega = \frac{2 \pi}{T} = 2 \pi n\nFor two coplanar concentric revolving bodies with angular speeds \omega_Aandand\omega_B:\n\omega{\text{rel}} = \omega_B - \omega_A\nT_{\text{rel}} = \frac{2 \pi}{\omega_{\text{rel}}} = \frac{T_1 T_2}{T_1 - T_2}\n\n5. Angular Acceleration (\alpha):\n\alpha = \frac{d\omega}{dt} = \frac{d^2 \theta}{dt^2}\nDimensional formula is [M^0 L^0 T^{-2}],measuredin, measured in\text{rad/s}^2. Tangential linear acceleration is:\n\mathbf{a}t = \boldsymbol{\alpha} \times \mathbf{r} \implies a_t = r \alpha\n\n# Centripetal Acceleration, Centripetal Force, and Centrifugal Force\n\n1. Centripetal Acceleration (a_c):\nAcceleration directed radially inward toward the center of the circular path, maintaining the continuous directional change of velocity:\na_c = \frac{v^2}{r} = \omega^2 r = v \omega = 4 \pi^2 n^2 r = \frac{4 \pi^2 r}{T^2}\n\n2. Centripetal Force (F_c):\nReal inward radial force required to sustain circular motion:\nF_c = m a_c = \frac{m v^2}{r} = m \omega^2 r = 4 \pi^2 m n^2 r = \frac{4 \pi^2 m r}{T^2}\nPhysical origins of centripetal force:\n- Whirling string: String tension T\n- Vehicle on level road: Friction f\n- Planet orbiting Sun: Gravitational attraction\n- Electron orbiting nucleus: Coulomb electrostatic force\n- Charged particle in magnetic field: Lorentz magnetic force q v B\n\n3. Centrifugal Force:\nA fictitious inertial force observed only within a rotating (non-inertial) reference frame. It equals m \omega^2 r in magnitude and acts radially outward, counterbalancing centripetal force within the rotating frame.\n\n4. Work Done by Centripetal Force:\nBecause centripetal force acts perpendicular to instantaneous displacement (\theta = 90^\circ):\nW = \mathbf{F}_c \cdot \mathbf{s} = F_c s \cos(90^\circ) = 0\nCentripetal force changes velocity direction but performs zero work and leaves kinetic energy unchanged.\n\n# Dynamics and Applications of Circular Motion\n\n1. Skidding of Vehicle on a Level Road:\nFor a vehicle taking a flat curve of radius r, static friction provides centripetal force:\nf = \mu m g \ge \frac{m v^2}{r} \implies v{\text{safe}} \le \sqrt{\mu r g}\n\n2. Skidding of Object on Rotating Platform:\nFor a mass matdistanceat distanceronaplatformrotatingaton a platform rotating at\omega:\nm \omega^2 r \le \mu m g \implies \omega_{\text{max}} = \sqrt{\frac{\mu g}{r}}\n\n3. Bending of a Cyclist:\nTo negotiate a curve of radius ratspeedat speedv,acyclistleansinwardbyangle, a cyclist leans inward by angle\thetafromverticalsonormalreactionfrom vertical so normal reactionR provides centripetal force:\n\n![Cyclist bending on a curve](https://assets.knowt.com/pdf-flow-prod/5b03bcb3-2f70-4b18-8804-34489e20c16c-figures/0.jpg)\n\nR \sin(\theta) = \frac{m v^2}{r}\nR \cos(\theta) = m g\n\tan(\theta) = \frac{v^2}{r g} \implies \theta = \tan^{-1}\left(\frac{v^2}{r g}\right)\n\n4. Banking of Roads:\nTo eliminate reliance on friction, outer road edges are elevated by height hoverwidthover widthlatbankingangleat banking angle\theta:\n\tan(\theta) = \frac{v^2}{r g} = \frac{h}{l}\nWhen friction coefficient \mu is present, maximum safe speed is:\nv_{\text{max}} = \sqrt{r g \left(\frac{\mu + \tan(\theta)}{1 - \mu \tan(\theta)}\right)}\n\n5. Overturning of Four-Wheeled Vehicle:\nCar mass m,centerofgravityheight, center of gravity heighth,wheelseparation, wheel separation2a,curveradius, curve radiusr.Normalreactionsoninner(. Normal reactions on inner (R_1)andouter() and outer (R_2) wheels:\nR_1 = \frac{1}{2} m g \left(1 - \frac{v^2 h}{r a g}\right)\nR_2 = \frac{1}{2} m g \left(1 + \frac{v^2 h}{r a g}\right)\nInner wheels lift off first (R_1 = 0). Maximum speed without overturning:\nv_{\text{max}} = \sqrt{\frac{r a g}{h}}\n\n6. Reaction of Road on Car over Curved Bridges:\n- Concave Bridge (radius r at lowest point):\nR - m g = \frac{m v^2}{r} \implies R = m g + \frac{m v^2}{r}\n\n- Convex Bridge (radius r at apex):\nm g - R = \frac{m v^2}{r} \implies R = m g - \frac{m v^2}{r}\nTo maintain road contact (R > 0),maximumspeedis), maximum speed isv_{\text{max}} = \sqrt{g r}.\n\n# Non-Uniform Circular Motion and Circular Motion Equations\n\nIn non-uniform circular motion, linear speed v varies with time. The particle possesses simultaneous centripetal and tangential accelerations:\n1. Centripetal Acceleration (a_c = \frac{v^2}{r} = \omega^2 r), directed radially inward.\n2. Tangential Acceleration (a_t = \frac{dv}{dt} = r \alpha), directed along the tangent.\n\nSince a_c \perp a_t,netacceleration, net accelerationa is:\na = \sqrt{a_c^2 + a_t^2} = \sqrt{\left(\frac{v^2}{r}\right)^2 + (r \alpha)^2}\n\nThe angle \theta of net acceleration relative to the radial line is:\n\tan(\theta) = \frac{a_t}{a_c}\n\nNet force acting on the particle:\nF_{\text{net}} = m a = m \sqrt{a_c^2 + a_t^2}\nCentripetal force performs zero work (W_c = 0),buttangentialforceperformswork(), but tangential force performs work (W_t = \int F_t ds). Instantaneous power delivered is:\nP = \mathbf{F}t \cdot \mathbf{v} = m a_t v\n\nEquations of Circular Motion under constant angular acceleration \alpha:\n1. \omega = \omega_0 \pm \alpha t\n2. \theta = \omega_0 t \pm \frac{1}{2} \alpha t^2\n3. \omega^2 = \omega_0^2 \pm 2 \alpha \theta\n4. \theta_n = \omega_0 \pm \frac{\alpha}{2} (2 n - 1)\n\n# Motion in a Vertical Circle\n\nMotion in a vertical circle is non-uniform circular motion governed by gravity. Let string length be landinitialhorizontalvelocityatlowestpointand initial horizontal velocity at lowest pointAbebeu.\n\nAt angular displacement \thetaandverticalheightand vertical heighth = l (1 - \cos(\theta)):\n1. Velocity (v):\nv = \sqrt{u^2 - 2 g h} = \sqrt{u^2 - 2 g l (1 - \cos(\theta))}\n\n2. String Tension (T):\nT = \frac{m v^2}{l} + m g \cos(\theta) = \frac{m}{l} [u^2 - g l (2 - 3 \cos(\theta))]\n\nKey positions along vertical loop:\n- Lowest Point A (\theta = 0^\circ, h = 0):\nv_A = u\nT_A = \frac{m u^2}{l} + m g\n\n- Horizontal Point B (\theta = 90^\circ, h = l):\nv_B = \sqrt{u^2 - 2 g l}\nT_B = \frac{m u^2}{l} - 2 m g\n\n- Highest Point C (\theta = 180^\circ, h = 2 l):\nv_C = \sqrt{u^2 - 4 g l}\nT_C = \frac{m u^2}{l} - 5 m g\n\nTension differences between points:\nT_A - T_B = 3 m g\nT_A - T_C = 6 m g\nT_B - T_C = 3 m g\n\nRegimes of vertical circular motion based on launch speed u:\n1. u > \sqrt{5 g l}:Completeverticalloop(: Complete vertical loop (T_C > 0 at apex).\n2. u = \sqrt{5 g l}:Criticalconditiontojustcompleteloop(: Critical condition to just complete loop (T_C = 0attop,apexcriticalspeedat top, apex critical speedv_C = \sqrt{g l}).\n3. \sqrt{2 g l} < u < \sqrt{5 g l}:Stringgoesslack(: String goes slack (T = 0) between horizontal and top apex before velocity reaches zero. Particle leaves circular arc and executes parabolic projectile flight.\n4. u = \sqrt{2 g l}:Oscillatesinsemi−circulararc(: Oscillates in semi-circular arc (v = 0andandT = 0athorizontalat horizontal\theta = 90^\circ).\n5. u < \sqrt{2 g l}:Oscillatesinanarcbelowhorizontal(: Oscillates in an arc below horizontal (v = 0beforebeforeT = 0).\n\nCritical State Quantities (u = \sqrt{5 g l}):\n- Lowest Point A: v_A = \sqrt{5 g l},,T_A = 6 m g,,KE = \frac{5}{2} m g l,,PE = 0\n- Horizontal Point B: v_B = \sqrt{3 g l},,T_B = 3 m g,,KE = \frac{3}{2} m g l,,PE = m g l\n- Highest Point C: v_C = \sqrt{g l},,T_C = 0,,KE = \frac{1}{2} m g l,,PE = 2 m g l\n- Total Mechanical Energy E = \frac{5}{2} m g l\n\nBlock on Frictionless Hemisphere:\nA block slides down from top apex of a smooth sphere of radius r.Itlosescontact(. It loses contact (N = 0) at height:\nh = \frac{2}{3} r\nCorresponding angle from vertical is \theta = \cos^{-1}\left(\frac{2}{3}\right).\n\n# Conical Pendulum\n\nA conical pendulum consists of a bob of mass mattachedtoastringoflengthattached to a string of lengthlrotatinginahorizontalcircleofradiusrotating in a horizontal circle of radiusr = l \sin(\theta)atverticaldepthat vertical depthh = l \cos(\theta).\n\nForces on bob:\nT \cos(\theta) = m g\nT \sin(\theta) = \frac{m v^2}{r} = m \omega^2 r\n\n1. Tension (T):\nT = \frac{m g}{\cos(\theta)} = \frac{m g l}{h} = \frac{m g l}{\sqrt{l^2 - r^2}}\n\n2. Linear Velocity (v):\nv = \sqrt{r g \tan(\theta)}\n\n3. Angular Velocity (\omega):\n\omega = \sqrt{\frac{g \tan(\theta)}{r}} = \sqrt{\frac{g}{h}} = \sqrt{\frac{g}{l \cos(\theta)}}\n\n4. Period of Revolution (T_P):\nT_P = \frac{2 \pi}{\omega} = 2 \pi \sqrt{\frac{h}{g}} = 2 \pi \sqrt{\frac{l \cos(\theta)}{g}}\n\n# Solved Comprehensive Problems\n\nProblem 1: Trajectory Analysis\nThe trajectory equation of a projectile is y = \sqrt{3} x - \frac{g x^2}{2}. Determine the angle of projection.\nSolution:\nCompare given equation with standard trajectory equation y = x \tan(\theta) - \frac{g x^2}{2 u^2 \cos^2(\theta)}:\n\tan(\theta) = \sqrt{3} \implies \theta = 60^\circ\n\nProblem 2: Range from Trajectory Equation\nThe equation of a projectile is y = 16 x - \frac{5}{4} x^2. Find its horizontal range.\nSolution:\nFactor the expression into standard range form y = x \tan(\theta) \left(1 - \frac{x}{R}\right):\ny = 16 x \left(1 - \frac{5 x}{64}\right) = 16 x \left(1 - \frac{x}{12.8}\right)\nComparing gives Range R = 12.8\,m\n\nProblem 3: Perpendicular Force Displacement\nA body of mass 2\,kghasinitialvelocityhas initial velocity3\,m/salongalongOEandexperiencesaperpendicularforceand experiences a perpendicular force4\,NalongalongOF.Finditsdisplacementfromoriginafter. Find its displacement from origin after4\,s.\nSolution:\nHorizontal motion: x = u_x t = 3 \times 4 = 12\,m\nPerpendicular motion: a_y = \frac{F}{m} = \frac{4}{2} = 2\,m/s^2\ny = \frac{1}{2} a_y t^2 = \frac{1}{2} (2) (4)^2 = 16\,m\nTotal distance d = \sqrt{x^2 + y^2} = \sqrt{12^2 + 16^2} = 20\,m\n\nProblem 4: Velocity Perpendicular to Initial Launch\nA particle is projected at angle \alphawithspeedwith speedu.Findthetime. Find the timet when its velocity vector becomes perpendicular to initial launch velocity.\nSolution:\nAt right angles, tangential condition gives v = u \cot(\alpha).\nVertical component relation: - v \cos(\alpha) = u \sin(\alpha) - g t\n- u \cot(\alpha) \cos(\alpha) = u \sin(\alpha) - g t\ng t = u \sin(\alpha) + \frac{u \cos^2(\alpha)}{\sin(\alpha)} = \frac{u (\sin^2(\alpha) + \cos^2(\alpha))}{\sin(\alpha)} = \frac{u}{\sin(\alpha)}\nt = \frac{u}{g \sin(\alpha)} = \frac{u \csc(\alpha)}{g}\n\nProblem 5: Maximum Range and Distance\nA grasshopper jumps a maximum horizontal distance 1.6\,m.Assumingzerogroundtime,calculatetotalhorizontaldistancetraversedin. Assuming zero ground time, calculate total horizontal distance traversed in10\,s.\nSolution:\nFor maximum jump range, \theta = 45^\circ:\nR{\text{max}} = \frac{u^2}{g} = 1.6 \implies u = \sqrt{1.6 \times 9.8} = 4\,m/s\nHorizontal speed component v_x = u \cos(45^\circ) = \frac{4}{\sqrt{2}} = 2 \sqrt{2}\,m/s\nDistance covered in 10\,sisisS = v_x t = 2 \sqrt{2} \times 10 = 20 \sqrt{2}\,m\n\nProblem 6: Banked Elevation Calculation\nA circular road of radius R = 50\,mandwidthand widthb = 10\,misdesignedforsafevelocityis designed for safe velocityv = 8.6\,m/s.Calculaterequiredouterelevation. Calculate required outer elevationh.\nSolution:\n\tan(\theta) = \frac{v^2}{R g} = \frac{h}{b}\nh = \frac{b v^2}{R g} = \frac{10 \times (8.6)^2}{50 \times 9.8} = \frac{10 \times 73.96}{490} = 1.5\,m\n\nProblem 7: Train Overturning Speed\nA train travels on circular rails separated by 2 a = 1.5\,monacurveofradiuson a curve of radiusr = 120\,m.Thecenterofgravityheightis. The center of gravity height ish = 2\,m. Find maximum safe speed before overturning.\nSolution:\nv_{\text{max}} = \sqrt{\frac{r a g}{h}} = \sqrt{\frac{120 \times 0.75 \times 9.8}{2}} = \sqrt{441} = 21\,m/s\n\nProblem 8: Vertical Loop Height Requirement\nA car rolls down a frictionless incline from height Hintoaverticalloopofdiameterinto a vertical loop of diameterD.Findminimumheight. Find minimum heightH to complete the loop.\nSolution:\nVelocity at bottom v = \sqrt{2 g H}.\nFor vertical loop completion, v \ge \sqrt{5 g r} = \sqrt{5 g \left(\frac{D}{2}\right)}.\n2 g H = \frac{5}{2} g D \implies H = \frac{5}{4} D$$