PCR Basics
Lecture Overview
Introduction to Polymerase Chain Reaction (PCR)
Importance of PCR in various fields
Topics covered:
Overview of PCR
Optimization of PCR
Essential aspects of primer design
Reference Readings:
Molecular Biology [electronic resource] by David P. Clark, Nanette J. Pazdernik, Michelle R. McGehee
Chapter 6: Polymerase Chain Reaction
Amplification of DNA
Tradition Prior to PCR:
Utilization of bacteria to increase DNA copies via traditional cloning methods.
Process involved:
Transferring specific DNA into a vector
Transforming recombinant DNA into a bacterial cell
Cultivating large quantities of bacteria
Purifying the DNA fragment from the bacterial culture
Kary Mullis & the History of PCR
1983: Conceptualization of PCR by Kary B. Mullis
1988: Introduction of Taq DNA polymerase enabled automated thermal cycling
Rapid Transformation of Fields by PCR:
Molecular biology research
Clinical diagnostics
Forensic science
Infectious disease testing
1993: Mullis awarded the Nobel Prize in Chemistry for PCR development
Overview of Polymerase Chain Reaction
Definition of PCR:
The polymerase chain reaction (PCR) is a molecular biology technique used to amplify small segments of DNA by repeated cycles of strand separation (denaturing) and DNA replication (extension).
Analysis of PCR Products
Gel Electrophoresis:
A common technique to analyze the size and quality of PCR products.
Quantitative PCR (qPCR):
Uses fluorescent reporters to measure the amplification during each cycle, represented as an amplification plot.
Typical graph indicates the cycle threshold (Ct) levels at which fluorescence is first detected.
PCR Cycles
1⃣ Reaction Setup
Template DNA
Forward & reverse primers
dNTPs
Buffer + Mg²⁺
Thermostable polymerase (e.g., Taq)
Water
Thermocycler:
Device programmed to facilitate rapid temperature changes during PCR cycles:
Denaturation Step:
Temperature: 95–99°C
Function: Separate double-stranded DNA (dsDNA).
Annealing Step:
Temperature: 50–65°C (Around 5°C below Tm)
Function: Allows primers to bind (anneal) to the template DNA
Extension Step:
Temperature: Optimal 65–75°C for DNA polymerase activity
Duration: Allow 1 min per 1000 base pairs (bp) of amplicon.
PCR Amplicon:
The final copies of the target DNA produced during a PCR reaction, also referred to as the PCR product.
Requirements for PCR
Key Components Needed:
Heat-stable DNA polymerase (e.g., Taq polymerase)
Thermocycler
*Reagents Needed:
Template DNA to be copied
Two single-stranded DNA primers
Deoxynucleotide triphosphates (dNTPs)
MgCl2*
Key Factors for PCR Optimization
Annealing Temperature:
Crucial aspect for specificity.
Optimal temperature ranges often 2-5°C lower than the melting temperature (Tm) of the primers.
Consequences of temperature miscalculations:
Too low: Generate non-specific products
Too high: No product produced
Magnesium Concentration (MgCl2):
Influences both enzyme activity and primer binding efficiency.
Too low → mispriming
Too high → no amplification
Primer design
18–22 bp
40–60% GC
Similar Tm (within 5°C)
Avoid hairpins & dimers
DNA Polymerase & Additives:
Hot-start enzymes: Prevent non-specific amplification before starting cycles.
DMSO/Formamide: Use for GC-rich DNA templates (3-10%) to reduce melting points; adjust annealing temperature downward accordingly.
BSA: Can enhance performance with basic Taq polymerases.
Key Factors for PCR Optimization: Primer Design Essentials
Primer Length:
Recommended length of 18–30 nucleotides.
Target Specificity:
A GC content of 40-60% is preferred.
Tm of Primers:
Should be between 65-75°C and within 5°C of each other.
3' End:
Both primers should end with C or G to strengthen binding (known as GC clamp).
Ampliocn Size:
Avoidance of primer-dimer and secondary structures.
Examples include:
Hairpin structures
Primer dimers
Primer-Dimers and Hairpin Structures
Hairpin Structures:
Result when sequences within a single PCR primer are complementary, causing folding back on itself.
Primer Dimers:
Occur when sequences between two PCR primers are complementary, leading to binding with each other instead of the target DNA.
DESIGNING A CONVENTIONAL PCR REACTION
Step 1: Choose Target Region
Sequence must be known at ends
Step 2: Design Primers
18–22 nucleotides
40–60% GC
No secondary structure
Tm between 52–58°C
PCR basics_2012
Step 3: Calculate Tm
Simple formula:
Tm ≈ 4(G+C) + 2(A+T)
Step 4: Set Annealing Temperature
~5°C below lowest primer Tm
Step 5: Assemble Reaction Mix
Add reagents on ice (template last).
Step 6: Program Thermocycler
30 cycles typical
1 min per kb extension
EXAMPLE: DESIGN A PRIMER SET & DETERMINE Tm
Given sequence (example):
5′-ATGGCTAGTACCGTACGTTAGCGTACCGGATCGA-3′
Forward primer (first 20 bases):
ATGGCTAGTACCGTACGTTA
Count bases:
A=5, T=6, G=4, C=5
Tm = 4(G+C) + 2(A+T)
= 4(9) + 2(11)
= 36 + 22
= 58°C
Reverse primer:
Take reverse complement of last 20 bases.
Design to match Tm within 5°C.
Annealing temperature ≈ 53°C.
Designing Primers for Changes to PCR Amplicons
Tailed PCR Primers:
Primers designed with additional sequences on the 5' end, which incorporate into the final PCR product.
Directed Mutagenesis:
Used when protein sequence known but DNA sequence unknown.
Primers contain multiple possible bases (e.g., N, R, Y)
Amplifies related genes from different organisms
INVERSE PCR
Used when flanking sequence unknown.
Steps:
Restriction digest genomic DNA
Ligate to form circular DNA
Primers face outward from known sequence
PCR amplifies unknown flanking region
DEGENERATE PCR
Used when protein sequence known but DNA sequence unknown.
Primers contain multiple possible bases (e.g., N, R, Y)
Amplifies related genes from different organisms
Comparison of Conventional (End-Point) versus qPCR (Quantitative PCR)
Feature | Conventional PCR | qPCR |
|---|---|---|
Detection | End-point (gel) | Real-time fluorescence |
Quantification | No | Yes |
Measurement | Band intensity | Ct value |
Speed | Slower | Faster |
Sensitivity | Moderate | High |
Conventional PCR
Analyzed after amplification via agarose gel
qPCR
Measures fluorescence each cycle using:
SYBR Green
TaqMan probes
Molecular beacons
Ct inversely proportional to starting template amount.
Learning Objectives
Upon completion of this lecture and assigned readings, students will be able to:
Define key terms: Denaturation, Annealing, Elongation, Amplicon, Melting temperature (Tm), Mispriming, Primer dimer, Ct (cycle threshold), Fluorophore, Quencher, FRET, Molecular beacon.
Describe procedural steps involved in conventional PCR.
Analyze key factors for PCR optimization.
Design a conventional PCR reaction given a DNA sequence and calculate Tm.
Explain directed mutagenesis, inverse PCR, and degenerate PCR steps.
Compare and contrast endpoint PCR with qPCR.