PRACTICAL 3 — GEL, PCR, BIOINFORMATICS
🧪 PART 1: PCR (POLYMERASE CHAIN REACTION)
⸻
🧠 FLASHCARD SET: PCR BASICS
Q: What is PCR?
A: A technique used to amplify (make many copies of) a specific DNA sequence.
⸻
Q: What is the purpose of PCR in this lab?
A: To amplify target genes (COI for insect ID or 16S rRNA for Wolbachia detection).
⸻
Q: What does PCR require?
A:
Template DNA
Primers (forward & reverse)
Taq polymerase
dNTPs
Buffer
Thermal cycler
⸻
Q: What do primers do?
A: Bind to specific DNA sequences and define the region to be amplified.
⸻
⸻
🔥 FLASHCARD SET: PCR STEPS
Q: What happens during denaturation?
A: DNA strands separate at ~95°C.
⸻
Q: What happens during annealing?
A: Primers bind to complementary DNA sequences (~50–65°C).
⸻
Q: What happens during extension?
A: Taq polymerase synthesizes new DNA strands (~72°C).
⸻
Q: How many cycles does PCR typically run?
A: ~25–35 cycles.
⸻
Q: Why is PCR exponential?
A: Each cycle doubles the DNA → millions of copies.
⸻
⸻
⚠ FLASHCARD SET: CONTROLS (VERY IMPORTANT)
Q: What is a positive control?
A: A sample that should produce a band → confirms PCR worked.
⸻
Q: What is a negative control (NTC)?
A: Contains no DNA → should produce NO band.
⸻
Q: What does a band in the negative control mean?
A: Contamination → results invalid.
⸻
Q: What if the positive control has no band?
A: PCR failed → results unreliable.
⸻
🧬 DNA DIRECTION & SYNTHESIS
Q: In what direction does DNA polymerase build DNA?
A: 5′ → 3′ direction.
⸻
Q: Why is primer direction important?
A: Primers must align so DNA can be extended 5′ → 3′.
⸻
Q: What happens if primers bind incorrectly?
A: No amplification or incorrect product.
⸻
⸻
🔬 TAQ POLYMERASE DETAILS
Q: Why is Taq polymerase used?
A: It is heat-stable and doesn’t denature at high temps.
⸻
Q: Where does Taq polymerase come from?
A: A heat-loving bacterium (Thermus aquaticus).
⸻
Q: What would happen without Taq polymerase?
A: DNA wouldn’t be replicated → PCR fails.
⸻
⸻
🧪 PCR PRECISION & ERRORS
Q: What is non-specific amplification?
A: Primers bind to wrong sequences → unwanted products.
⸻
Q: What causes non-specific amplification?
A: Low annealing temperature or poor primer design.
⸻
Q: What happens if annealing temp is too high?
A: Primers won’t bind → no amplification.
⸻
⸻
🧼 CONTAMINATION (BIG EXAM TOPIC)
Q: Why is PCR highly sensitive to contamination?
A: It amplifies even tiny amounts of DNA.
⸻
Q: Common contamination sources?
A: Skin cells, previous samples, airborne DNA.
⸻
Q: How do labs prevent contamination?
A:
Gloves
Sterile tips
Clean workspace
⸻
⸻
🧠 GENE TARGETS (LAB-SPECIFIC)
Q: What is the COI gene used for?
A: Identifying insect species.
⸻
Q: What is the Wolbachia 16S rRNA gene used for?
A: Detecting Wolbachia bacteria.
⸻
Q: Why use specific genes?
A: They are unique markers for identification.
⸻
📈 PCR OUTPUT THINKING
Q: What determines PCR product size?
A: Distance between primers.
⸻
Q: Why is expected size important?
A: Confirms correct DNA region was amplified.
⸻
🧠 INTERPRETATION CARDS
Q: How do you know PCR worked?
A: A band appears on the gel at expected size.
⸻
Q: What if no band appears in sample?
A: No amplification → target DNA absent OR PCR failed.
🧬 SPECIFICITY & BINDING
Q: What determines PCR specificity?
A: Primer sequence and binding accuracy.
⸻
Q: What happens if primers partially mismatch?
A: Weak or incorrect amplification may occur.
⸻
⸻
🧪 PCR INHIBITORS
Q: What are PCR inhibitors?
A: Substances that interfere with amplification.
⸻
Q: Examples of inhibitors?
A:
Proteins
Chemicals from extraction
Environmental contaminants
⸻
Q: What do inhibitors cause?
A: False negatives (no band even if DNA is present).
⸻
⸻
🔁 REPRODUCIBILITY
Q: Why run replicates in PCR?
A: To confirm consistency of results.
⸻
Q: What if replicates differ?
A: Results may be unreliable.
⸻
⸻
🧠 INTERPRETATION EDGE CASES
Q: Can very faint bands be meaningful?
A: Yes—indicates low DNA concentration.
⸻
Q: What if band is stronger than control?
A: Sample has higher DNA concentration.
🧫 PART 2: GEL ELECTROPHORESIS
🧠 FLASHCARD SET: GEL BASICS
Q: What is gel electrophoresis?
A: A method used to separate DNA fragments by size.
⸻
Q: Why does DNA move in a gel?
A: DNA is negatively charged → moves toward positive electrode.
⸻
Q: Which fragments travel farther?
A: Smaller DNA fragments.
⸻
Q: What are wells?
A: Starting points where samples are loaded.
⸻
Q: What is a DNA ladder?
A: A reference used to estimate fragment size.
⸻
⸻
📊 FLASHCARD SET: BAND INTERPRETATION
Q: What does a band represent?
A: A DNA fragment of a specific size.
⸻
Q: What does a band at expected size mean?
A: Target DNA is present.
⸻
Q: What does no band mean?
A: Target DNA is absent OR PCR failed.
⸻
Q: What does a smear mean?
A: Degraded DNA or poor PCR.
⸻
⸻
🧪 LANE ANALYSIS (HIGH-YIELD)
Q: What should the positive control show?
A: A band.
⸻
Q: What should the negative control show?
A: No band.
⸻
Q: If sample has a band?
A: Positive for target DNA (e.g., Wolbachia present).
⸻
Q: If sample has no band?
A: Negative for target DNA.
⸻
⸻
🧠 INTERPRETATION SENTENCE (MEMORIZE THIS)
Q: How do you explain gel results?
A:
“The band aligns with the ladder at the expected base pair size, indicating successful PCR amplification. The positive control confirms the reaction worked, and the absence of a band in the negative control confirms no contamination.”
⚡ GEL MECHANICS
Q: What determines how far DNA travels?
A: Fragment size + gel concentration.
⸻
Q: What does higher agarose % do?
A: Separates smaller fragments better.
⸻
Q: What does lower agarose % do?
A: Separates larger fragments better.
⸻
⸻
💡 VISUALIZATION
Q: How are DNA bands seen?
A: Under UV light using a stain (e.g., ethidium bromide).
⸻
Q: Why does DNA glow?
A: Dye binds to DNA and fluoresces.
⸻
⸻
🧪 BAND CHARACTERISTICS
Q: What does a thick/bright band mean?
A: More DNA present.
⸻
Q: What does a faint band mean?
A: Less DNA, but still positive.
⸻
Q: What are multiple bands?
A: Non-specific amplification or multiple products.
⸻
⸻
🚨 COMMON ERRORS
Q: What causes smeared bands?
A:
Degraded DNA
Too much DNA
Poor PCR
⸻
Q: What happens if gel runs too long?
A: Bands run off the gel.
⸻
Q: What happens if gel runs too short?
A: Poor separation.
⸻
⸻
🔬 LANE LOGIC (NEXT LEVEL)
Q: Why compare sample bands to ladder?
A: To estimate fragment size in base pairs.
⸻
Q: What if sample band ≠ expected size?
A: Incorrect amplification or contamination.
⸻
⸻
🧠 ELECTRICAL FLOW
Q: Where are wells placed?
A: Near the negative electrode.
⸻
Q: Why?
A: DNA moves toward positive electrode.
📏 SIZE ESTIMATION (THEY LOVE THIS)
Q: How do you estimate DNA size from a gel?
A: Compare band position to ladder bands.
⸻
Q: What if band falls between ladder bands?
A: Estimate approximate size.
⸻
⸻
🧪 TRACKING DYE
Q: What is tracking dye used for?
A: To monitor how far the gel has run.
⸻
Q: Does tracking dye represent DNA?
A: ❌ No—it’s just a visual marker.
⸻
⸻
⚡ RESOLUTION LIMITS
Q: Can gels perfectly separate all DNA sizes?
A: ❌ No—similar sizes may overlap.
⸻
⸻
🧠 POLARITY CHECK (VERY COMMON TRICK)
Q: What happens if gel is run backwards?
A: DNA runs off the wrong end → no bands visible.
🧬 PART 3: BIOINFORMATICS (BLAST)
🧠 FLASHCARD SET: BASICS
Q: What is BLAST?
A: A tool used to compare DNA sequences to known databases.
⸻
Q: What is the purpose of BLAST in this lab?
A: To identify organisms or confirm gene sequences.
⸻
⸻
📊 FLASHCARD SET: KEY TERMS
Q: What is percent identity?
A: The percentage of matching bases between sequences.
⸻
Q: What is query coverage?
A: How much of your sequence aligns with the match.
⸻
Q: What is an E-value?
A: Probability the match occurred by chance.
⸻
Q: What is a good E-value?
A: Very low (close to 0).
⸻
⸻
🏆 INTERPRETATION CARDS
Q: What indicates a strong match?
A:
High % identity
High query coverage
Low E-value
⸻
Q: What does the top BLAST hit represent?
A: The most likely organism your DNA came from.
⸻
⸻
🌳 PHYLOGENY
Q: What does a phylogenetic tree show?
A: Evolutionary relationships.
⸻
Q: What do closer branches mean?
A: More closely related organisms.
🧬 SEQUENCE QUALITY
Q: What is a DNA sequence chromatogram?
A: A visual output showing nucleotide peaks.
⸻
Q: What do clean peaks mean?
A: High-quality sequence.
⸻
Q: What do messy peaks mean?
A: Poor sequence quality.
⸻
⸻
📊 ALIGNMENT DETAILS
Q: What are gaps in alignment?
A: Insertions or deletions in sequences.
⸻
Q: What are mismatches?
A: Differences between sequences.
⸻
⸻
🧠 CONSERVED VS VARIABLE REGIONS
Q: What are conserved regions?
A: DNA sequences that stay similar across species.
⸻
Q: Why are conserved regions important?
A: Help identify related organisms.
⸻
Q: What are variable regions?
A: Regions that differ → useful for distinguishing species.
⸻
⸻
🌍 INTERPRETING RESULTS DEEPER
Q: Why might multiple BLAST matches appear?
A: Similar species share DNA sequences.
⸻
Q: How do you choose the best match?
A: Highest identity + coverage + lowest E-value.
⸻
⸻
🌳 PHYLOGENETIC TREE ADVANCED
Q: What is a node?
A: A branching point (common ancestor).
⸻
Q: What is a clade?
A: A group of related organisms.
⸻
Q: What does branch length indicate?
A: Genetic difference.
⸻
⸻
🧠 REAL LAB INTERPRETATION
Q: If COI matches an insect species?
A: You identified your insect.
⸻
Q: If Wolbachia gene matches?
A: Sample is infected.
⸻
⸻
🚨 ULTRA HIGH-YIELD CONNECTION CARDS
⸻
Q: How are PCR and gel related?
A: PCR creates DNA → gel shows results.
⸻
Q: How are gel and bioinformatics related?
A: Gel confirms amplification → bioinformatics identifies sequence.
⸻
Q: Full workflow?
A:
DNA extraction → PCR → Gel → Sequence → BLAST
📈 PCR PHASES (VERY TESTABLE)
Q: What are the 3 phases of PCR amplification?
A:
Exponential phase
Linear phase
Plateau phase
⸻
Q: What happens in the plateau phase?
A: Reaction slows due to reagent depletion.
⸻
Q: Why is plateau phase important?
A: PCR efficiency decreases → affects band intensity.
⸻
⸻
🧪 PRIMER-DIMER (SNEAKY QUESTION)
Q: What is a primer-dimer?
A: Primers bind to each other instead of DNA.
⸻
Q: What does a primer-dimer look like on a gel?
A: Very small band near the bottom.
⸻
⸻
🔥 PCR CONDITIONS
Q: Why is the lid of the thermal cycler heated?
A: Prevents condensation inside tubes.
⸻
Q: What happens if Mg²⁺ concentration is wrong?
A: PCR efficiency is affected (too much = errors, too little = no amplification).
⸻
⸻
🧠 PCR LIMITATIONS
Q: Can PCR prove DNA is from a living organism?
A: ❌ No—only shows DNA presence.
⸻
Q: Why is PCR considered sensitive but not always specific?
A: It can amplify unintended DNA if primers misbind.
⚠ GEL DISTORTIONS
Q: What are “smiling bands”?
A: Curved bands due to uneven heating.
⸻
Q: What causes smiling?
A: High voltage or uneven gel temperature.
⸻
⸻
🧪 LOADING ERRORS
Q: What happens if too much DNA is loaded?
A: Thick, smeared bands.
⸻
Q: What happens if too little DNA is loaded?
A: Very faint or invisible bands.
⸻
Q: What do air bubbles in wells cause?
A: Irregular band formation.
⸻
⸻
🔬 RUN CONDITIONS
Q: Why must gel run at proper voltage?
A: Too high = distortion, too low = slow/poor separation.
⸻
Q: Why is buffer important?
A: Conducts electricity for DNA movement.
⸻
⸻
🧠 INTERPRETATION DEPTH
Q: Can two different DNA fragments appear the same size?
A: ✅ Yes, if they have similar base pair lengths.
⸻
Q: Why is gel not enough for identification?
A: It shows size, not sequence.
📊 BLAST NUANCES
Q: Why is % identity alone not enough?
A: Must also consider coverage and E-value.
⸻
Q: What if identity is high but coverage is low?
A: Match may be incomplete → less reliable.
⸻
⸻
🔬 SEQUENCE RELIABILITY
Q: Why might sequencing results be inaccurate?
A:
Contamination
Poor PCR
Mixed DNA samples
⸻
⸻
🧠 DATABASE LOGIC
Q: What does BLAST compare your sequence to?
A: A database of known sequences.
⸻
Q: Why might your exact organism not appear?
A: It may not be in the database.
⸻
⸻
🌳 TREE INTERPRETATION TRAPS
Q: Does closer position always mean identical species?
A: ❌ No—just more closely related.
⸻
Q: What does a long branch mean?
A: More genetic differences.
⸻
⸻
🔗 CONNECTION + APPLICATION FLASHCARDS
⸻
Q: Why confirm PCR results with gel?
A: To verify amplification occurred.
⸻
Q: Why confirm gel results with sequencing?
A: To verify identity of DNA.
⸻
⸻
Q: Can you have a band but wrong identity?
A: ✅ Yes—wrong DNA amplified.
⸻
⸻
Q: Can PCR + gel be correct but BLAST unclear?
A: ✅ Yes—sequence may not match database well.
⸻
⸻
🧠 “IF THEY GIVE YOU A SCENARIO…” CARDS
⸻
Q: Sample band present, control good → result?
A: Positive for target DNA.
⸻
Q: Sample band present, NTC also has band → result?
A: Contaminated → invalid.
⸻
⸻
Q: No sample band, positive control works → result?
A: Sample is negative.
⸻
⸻
Q: No bands anywhere → result?
A: PCR failed.
⸻
📊 BLAST COMPARISON THINKING
Q: If two matches have similar identity, how choose?
A: Pick one with better coverage and lower E-value.
⸻
⸻
🧬 AMBIGUOUS BASES
Q: What does “N” in a sequence mean?
A: Unknown nucleotide.
⸻
Q: What causes ambiguous bases?
A: Poor sequencing quality.
⸻
⸻
🌳 TREE ROOTING
Q: What is an outgroup?
A: A distant species used to root the tree.
⸻
Q: Why use an outgroup?
A: Helps determine evolutionary direction.
⸻
⸻
🧠 BIOINFO LIMITATIONS
Q: Can BLAST guarantee exact species ID?
A: ❌ No—only closest match.
⸻
⸻
🔥 SUPER CONNECTION CARDS (HIGHEST LEVEL)
⸻
Q: Why might PCR + gel show band but BLAST fail?
A: Sequence quality is poor.
⸻
⸻
Q: Why might PCR fail but DNA still exists?
A: Inhibitors or bad primers.
⸻
⸻
Q: Why is sequencing the “final confirmation”?
A: It reveals exact DNA identity.
⸻
⸻
Q: What is the weakest step in workflow?
A: PCR (most prone to failure/contamination).
⸻
⸻
🧠 “PROFESSOR THINKING” CARDS
⸻
Q: What is the MOST important validation step?
A: Controls (positive & negative).
⸻
⸻
Q: What is the MOST convincing evidence of identity?
A: High BLAST match (identity + coverage + low E-value).
⸻
⸻
Q: What is the MOST common experimental issue?
A: Contamination or PCR failure.