Lesson 5 Power

Core Definitions of Energy and Power

  • Energy is defined as the capacity to do work.
  • Power is defined as the rate at which work is done, or the rate/speed of energy flow (typically measured per second).
  • The fundamental mathematical definition of power is:   Power=EnergyTime\text{Power} = \frac{\text{Energy}}{\text{Time}}
  • Power Output Comparison:
    • An atomic bomb and a nuclear power plant can both release 1,000,000,000 Joules1,000,000,000\,\text{Joules} (1 billion joules1\text{ billion joules}) of total energy.
    • An atomic bomb releases this energy in a matter of a few seconds, resulting in a tremendously high power output.
    • A nuclear power plant releases this same energy over a period of a few decades, resulting in a much lower power output.
  • Simple Rate Calculations:
    • Converting 100 Joules100\,\text{Joules} every second yields an energy flow rate of 100 J/s100\,\text{J/s}.
    • Converting 100 Joules100\,\text{Joules} over a duration of 10 seconds10\,\text{seconds} yields an energy flow rate of 10 J/s10\,\text{J/s}.

Units of Measurement and System Conversions

  • SI System (International System of Units):
    • The SI unit of energy is the Joule (J\text{J}).
    • The SI unit of power is Joules per second (J/s\text{J/s}), which is defined as the Watt (W\text{W}):     1 Watt=1 J/s1\,\text{Watt} = 1\,\text{J/s}
    • Common metric prefixes for Watts include:
    • Kilowatt (kW\text{kW}): 1 kW=1,000 W1\,\text{kW} = 1,000\,\text{W} (1 thousand watts1\text{ thousand watts})
    • Megawatt (MW\text{MW}): 1 MW=1,000,000 W1\,\text{MW} = 1,000,000\,\text{W} (1 million watts1\text{ million watts})
    • Gigawatt (GW\text{GW}): 1 GW=1,000,000,000 W1\,\text{GW} = 1,000,000,000\,\text{W} (1 billion watts1\text{ billion watts})
    • Terawatt (TW\text{TW}): 1 TW=1,000,000,000,000 W1\,\text{TW} = 1,000,000,000,000\,\text{W} (1 trillion watts1\text{ trillion watts})
  • Kilowatt-Hour (kW-hr):
    • A kilowatt (kW\text{kW}) is a unit of power.
    • A kilowatt-hour (kW-hr\text{kW-hr}) is a unit of energy, often used to quantify electrical consumption on billing statements.
    • Sustaining a power output of 1 kW1\,\text{kW} for 1 hour1\,\text{hour} results in an energy output of 1 kW-hr1\,\text{kW-hr}.
    • Converting kilowatt-hours to kilojoules:
    • There are 3600 seconds3600\,\text{seconds} in 1 hour1\,\text{hour}.
    • 1 kW-hr=1 kJ/s×3600 seconds=3600 kJ1\,\text{kW-hr} = 1\,\text{kJ/s} \times 3600\,\text{seconds} = 3600\,\text{kJ}
  • British Imperial System:
    • The unit of energy is the foot-pound (ft-lb\text{ft-lb}), defined as moving 1 lb1\,\text{lb} through a distance of 1 foot1\,\text{foot} based on work being force multiplied by displacement (Work=Force×Displacement\text{Work} = \text{Force} \times \text{Displacement}).
    • The unit of power is foot-pounds per second (ft-lbs/s\text{ft-lbs/s}).
    • Definition of horsepower (hp\text{hp}):     550 ft-lbs/s=1 hp550\,\text{ft-lbs/s} = 1\,\text{hp}
  • Common Conversion Equivalencies:
    • Horsepower to Watts:     746 W=1 hp746\,\text{W} = 1\,\text{hp}
    • British Thermal Units per minute to Watts:     1 BTU/min=17 W1\,\text{BTU/min} = 17\,\text{W}

Instantaneous Power versus Average Power

  • Power can express either instantaneous energy flow or average power over a given duration.
  • An energy rate of 1 BTU/min1\,\text{BTU/min} equals 17 J/s17\,\text{J/s}, but this rate does not imply that exactly 17 Joules17\,\text{Joules} are converted in every individual second.
  • Vehicle Trip Example:
    • Driving a car to campus over 30 minutes30\,\text{minutes} consumes energy via combusted gasoline.
    • Power output varies drastically throughout the trip: it is low when stopped at a traffic light and high when accelerating to 60 mph60\,\text{mph}.
    • Total energy divided by the total time gives the average power output, but does not provide the precise power output at any specific instant.
  • Mathematical Definitions:
    • Average Power (PavgP_{\text{avg}}):     Pavg=EnergytimeP_{\text{avg}} = \frac{\text{Energy}}{\text{time}}
    • Instantaneous Power (PinstP_{\text{inst}}):     Pinst=EnergysecondP_{\text{inst}} = \frac{\text{Energy}}{\text{second}}
  • Distinction and Equality Conditions:
    • The difference between average and instantaneous power lies in the duration of the time interval used in the calculation.
    • If power output remains completely constant over a period, average power is identical to instantaneous power (Pavg=PinstP_{\text{avg}} = P_{\text{inst}}).
    • Constant power output describes an electrical light bulb left on for 30 minutes30\,\text{minutes}, but does not describe a 30-minute30\text{-minute} automobile ride.

Worked Calculation Example: Dorm Lighting Energy and Power

  • Problem Statement: A dorm room uses 55 lightbulbs, each rated at 60 W60\,\text{W}. The lightbulbs remain turned on for 8 hours8\,\text{hours}. Calculate the total energy consumed, average power, and instantaneous power.
  • Step 1: Total Energy Calculation:
    • Combined power rating of the lightbulbs:     5×60 W=300 W5 \times 60\,\text{W} = 300\,\text{W}
    • Energy consumed in watt-hours:     300 W×8 hours=2400 watt-hours=2.4 kWh300\,\text{W} \times 8\,\text{hours} = 2400\,\text{watt-hours} = 2.4\,\text{kWh}
    • Energy consumed in kilojoules:     2.4 kWh×3600 kJ/kWh=8,640 kJ2.4\,\text{kWh} \times 3600\,\text{kJ/kWh} = 8,640\,\text{kJ}
  • Step 2: Average Power Calculation:
    • Convert energy to Joules:     8,640 kJ=8,640,000 J8,640\,\text{kJ} = 8,640,000\,\text{J}
    • Convert time to seconds:     8 hours×3600 seconds/hour=28,800 seconds8\,\text{hours} \times 3600\,\text{seconds/hour} = 28,800\,\text{seconds}
    • Calculate average power:     Pavg=8,640,000 Joules28,800 seconds=300 J/s=300 WP_{\text{avg}} = \frac{8,640,000\,\text{Joules}}{28,800\,\text{seconds}} = 300\,\text{J/s} = 300\,\text{W}
  • Step 3: Instantaneous Power Calculation:
    • Calculated from active bulb ratings:     5×60 W=300 W5 \times 60\,\text{W} = 300\,\text{W}
  • Analysis:
    • In this scenario, instantaneous power equals average power (300 W300\,\text{W}) because the power output of the lightbulbs was strictly constant throughout the entire 8 hours8\,\text{hours}.