Fundamentals of Solutions and Concentration Expressions
Solutions are defined as homogeneous mixtures composed of two or more chemically non-reacting substances whose composition can be varied within certain limits. A solution consists of a solvent, which determines the physical state of the solution and is typically present in the largest quantity, and one or more solutes, which are dissolved in the solvent.
Classification of Solutions
Solutions are categorized into three broad classes based on the physical state of the solvent:
Gaseous Solutions: Solutions in which the solvent is a gas. The solute can exist in any physical state:
- Gas in Gas: A mixture of oxygen (O2) and nitrogen (N2) gas in the atmosphere.
- Liquid in Gas: Chloroform vapor mixed with nitrogen gas, or humidity in the air.
- Solid in Gas: Camphor vapors in nitrogen gas, or smoke particles suspended in air.
Liquid Solutions: Solutions where the solvent is a liquid:
- Gas in Liquid: Oxygen dissolved in water, or carbon dioxide in carbonated beverages.
- Liquid in Liquid: Ethanol dissolved in water.
- Solid in Liquid: Glucose, sucrose, or sodium chloride dissolved in water.
Solid Solutions: Solutions where the solvent is a solid substance:
- Gas in Solid: Solution of hydrogen gas in palladium (H2/Pd). This forms an interstitial solid solution where small hydrogen atoms occupy the interstitial spaces within the metallic crystal lattice of palladium.
- Liquid in Solid: Amalgam of mercury with sodium (Hg−Na amalgam).
- Solid in Solid: Substitutional solid solutions such as copper dissolved in gold, or brass (copper and zinc).
Quantitative Concentration Expressions
Mole Fraction (x)
The mole fraction of a given component in a mixture is defined as the ratio of the number of moles of that component to the total number of moles of all components present in the solution. Mole fraction is dimensionless.
For a binary solution containing component A (solute) and component B (solvent) with mole quantities nA and nB:
xA=nA+nBnA
xB=nA+nBnB
For any multi-component mixture containing i components:
∑ixi=x1+x2+⋯+xn=1
Molality (m)
Molality is defined as the number of moles of solute dissolved per kilogram (1000g) of the solvent. It is independent of temperature because mass does not alter with thermal expansion or contraction.
m=Mass of solvent in kgMoles of solute=M2×w1w2×1000
Where:
- w2 is the mass of the solute in grams (g)
- M2 is the molar mass of the solute in grams per mole (gmol−1)
- w1 is the mass of the solvent in grams (g)
Molarity (M)
Molarity is defined as the number of moles of solute dissolved per liter (1000mL or 1dm3) of the total solution. Because liquid volume expands or contracts with temperature fluctuations, molarity is temperature-dependent.
M=Volume of solution in LitersMoles of solute=M2×Vin mLw2×1000
Mass Percentage (\% w/w)
The mass percentage of a component in a solution represents the mass of that solute present in 100g of the solution:
Mass percentage of a component=Total mass of the solutionMass of the component in solution×100%
Parts Per Million (ppm)
Used when a solute is present in trace quantities, parts per million expresses the parts of solute per million parts of solution by mass:
ppm=Total mass of solutionMass of solute×106
Analytical Concentration Problems and Worked Solutions
Binary Mass Percentage: Benzene and Carbon Tetrachloride
Calculate the mass percentage of benzene (C6H6) and carbon tetrachloride (CCl4) when 22g of benzene is dissolved in 122g of carbon tetrachloride.
Total mass of solution=Mass of C6H6+Mass of CCl4=22g+122g=144g
Mass percentage of C6H6=Mass of C6H6+Mass of CCl4Mass of C6H6×100%=22+12222×100%=15.28%
Mass percentage of CCl4=Mass of C6H6+Mass of CCl4Mass of CCl4×100%=22+122122×100%=84.72%
Alternatively: Mass percentage of CCl4=(100−15.28)%=84.72%
Mole Fraction from Mass Percentage: Benzene in CCl4
Calculate the mole fraction of benzene in a solution containing 30% by mass in carbon tetrachloride.
Assume a total mass of solution equal to 100g.
- Mass of benzene (C6H6) = 30g
- Mass of carbon tetrachloride (CCl4) = (100−30)g=70g
M(C6H6)=6×12+6×1=78gmol−1
n(C6H6)=78gmol−130g=0.3846mol
M(CCl4)=1×12+4×35.5=154gmol−1
n(CCl4)=154gmol−170g=0.4545mol
x(C6H6)=n(C6H6)+n(CCl4)n(C6H6)=0.3846+0.45450.3846=0.83910.3846=0.458
Molarity Calculations
(a) Determine the molarity of 30g of cobalt(II) nitrate hexahydrate, Co(NO3)2⋅6H2O, dissolved in 4.3L of solution.
M(Co(NO3)2⋅6H2O)=59+2(14+3×16)+6×18=59+2(62)+108=291gmol−1
n=291gmol−130g=0.103mol
Molarity=4.3L0.103mol=0.023M
(b) Determine the final molarity when 30mL of 0.5MH2SO4 is diluted to 500mL.
Moles of H2SO4=M1×V1=0.5molL−1×0.030L=0.015mol
M2=V2Moles=0.500L0.015mol=0.03M
Alternatively: M1V1=M2V2⟹0.5M×30mL=M2×500mL⟹M2=0.03M
Calculate the mass of urea (NH2CONH2) required to prepare 2.5kg of a 0.25m aqueous solution.
M(NH2CONH2)=2(14+2)+12+16=60gmol−1
A 0.25m solution contains 0.25mol of urea per 1000g of water:
Mass of urea=0.25mol×60gmol−1=15g
Total mass of solution=1000g+15g=1015g
Since 1015g of solution contains 15g of urea, the mass required for 2.5kg (2500g) of solution is:
Mass of urea required=1015g15g×2500g=36.95g≈37g
Solution of Potassium Iodide (KI)
Calculate the molality, molarity, and mole fraction of KI if the density of a 20% (w/w) aqueous solution is 1.202gmL−1.
In 100g of solution:
- Mass of KI=20g
- Mass of water (H2O) = 100g−20g=80g=0.080kg
- Molar mass of KI=39+127=166gmol−1
n(KI)=166gmol−120g=0.1205mol
Molality (m)=0.080kg0.1205mol=1.506m≈1.51m
$$\text{Volume of } 100\,g \text{ solution} = \frac{\text{Mass}}{\text{Density}} = \frac{100\,g}{1.202