Money Multiplier and T-Account Analysis Notes

The Money Multiplier and New Money Creation

  • The money multiplier is a faster method for calculating the amount of new money created by the banking system than performing step-by-step simulations.

  • The primary formula for the maximum change in checkable deposits is:   - Maximum Change in Checkable Deposits=Excess Reserves×Money Multiplier\text{Maximum Change in Checkable Deposits} = \text{Excess Reserves} \times \text{Money Multiplier}

  • To find the Money Multiplier, use the formula:   - Money Multiplier=1Reserve Requirement\text{Money Multiplier} = \frac{1}{\text{Reserve Requirement}}

  • Using the previous example where the initial deposit was $8,000\$8,000, the excess reserves were $7,200\$7,200, and the reserve requirement was 10%10\% (0.10.1):   - Multiplier=10.1=10\text{Multiplier} = \frac{1}{0.1} = 10   - Change in Checkable Deposits=7,200×10=$72,000\text{Change in Checkable Deposits} = 7,200 \times 10 = \$72,000

  • This result represents the "new money" created in the system.

Alternative Multiplier Calculations and Clarifications

  • Some alternative methods use the initial deposit instead of excess reserves in the formula:   - Initial Deposit×Money Multiplier=Total Change in Checkable Deposits\text{Initial Deposit} \times \text{Money Multiplier} = \text{Total Change in Checkable Deposits}   - Example: \8,000 \times 10 = \80,00080,000

  • However, to find the specific change in the money supply (new money), you must subtract the initial deposit from that total:   - $80,000−$8,000=$72,000\$80,000 - \$8,000 = \$72,000

  • Using excess reserves directly in the formula is more efficient because it skips the step of subtracting the initial deposit to find the net change in the money supply.

Fundamental T-Account Principles and Formulas

  • Banks use T-accounts to track assets and liabilities.

  • Assets (Reserves and Loans) must always equal Liabilities (Deposits):   - Assets=Liabilities\text{Assets} = \text{Liabilities}   - Reserves+Loans=Deposits\text{Reserves} + \text{Loans} = \text{Deposits}

  • Reserves are categorized into two types:   1. Required Reserves: The amount a bank is legally mandated to hold.   2. Excess Reserves: The amount held above the legal requirement that can be used for loans.

  • Key formulas for T-account analysis:   - Required Reserves=Deposits×Reserve Requirement\text{Required Reserves} = \text{Deposits} \times \text{Reserve Requirement}   - Excess Reserves=Total Reserves−Required Reserves\text{Excess Reserves} = \text{Total Reserves} - \text{Required Reserves}   - Reserve Requirement=Required ReservesDeposits\text{Reserve Requirement} = \frac{\text{Required Reserves}}{\text{Deposits}}

Problem Scenario 1: Finding an Unknown Reserve Requirement

  • Scenario: A bank is loaning out all its excess reserves (meaning it only holds what is required).

  • Data provided:   - Deposits: $15,000\$15,000   - Reserves (assumed required): $1,800\$1,800   - Loans: $13,200\$13,200

  • Calculation:   - Set up the formula: Required Reserves=Deposits×Reserve Requirement\text{Required Reserves} = \text{Deposits} \times \text{Reserve Requirement}   - 1,800=15,000×X1,800 = 15,000 \times X   - X=1,80015,000X = \frac{1,800}{15,000}   - X=0.12X = 0.12

  • Result: The reserve requirement is 12%12\%.

Problem Scenario 2: Implicit Reserve Requirements with Excess Reserves

  • Scenario: A bank is holding specific total reserves but explicitly states they are holding a portion as excess.

  • Data provided:   - Deposits: $25,000\$25,000   - Total Reserves: $6,400\$6,400   - Loans: $18,600\$18,600   - Excess Reserves: $1,400\$1,400

  • Step 1: Calculate Required Reserves:   - Required Reserves=Total Reserves−Excess Reserves\text{Required Reserves} = \text{Total Reserves} - \text{Excess Reserves}   - Required Reserves=6,400−1,400=5,000\text{Required Reserves} = 6,400 - 1,400 = 5,000

  • Step 2: Calculate Reserve Requirement:   - Reserve Requirement=Required ReservesDeposits\text{Reserve Requirement} = \frac{\text{Required Reserves}}{\text{Deposits}}   - Reserve Requirement=5,00025,000=0.2\text{Reserve Requirement} = \frac{5,000}{25,000} = 0.2

  • Result: The reserve requirement is 20%20\%.

Problem Scenario 3: Identifying Excess Reserves Held

  • Scenario: Given a reserve requirement and total reserves, determine the specific amount held in excess.

  • Data provided:   - Deposits: $30,000\$30,000   - Total Reserves: $5,800\$5,800   - Loans: $24,200\$24,200   - Reserve Requirement: 15%15\% (0.150.15)

  • Step 1: Calculate Required Reserves:   - Required Reserves=30,000×0.15=4,500\text{Required Reserves} = 30,000 \times 0.15 = 4,500

  • Step 2: Calculate Excess Reserves:   - Excess Reserves=Total Reserves−Required Reserves\text{Excess Reserves} = \text{Total Reserves} - \text{Required Reserves}   - Excess Reserves=5,800−4,500=1,300\text{Excess Reserves} = 5,800 - 4,500 = 1,300

  • Result: The bank is holding $1,300\$1,300 in excess reserves.

Basic Balancing Example

  • Some problems may simply require balancing the T-account.

  • Example:   - Reserves: $3,000\$3,000   - Loans: $15,000\$15,000   - Total Assets: $18,000\$18,000

  • Since Assets must equal Liabilities, the Deposits (Liabilities) must be $18,000\$18,000.