Physics 2026

Distance, Displacement, and Graphs

Scalar: Measurements that are fully described by a number (don’t need a direction). Eg., mass, time, etc

Vector: Measurements that need both a number and a direction to be fully described. Vector quantities are represented by bolded letters. Eg., displacement, force, acceleration, etc

Distance (d): The measure of the length of the path taken by an object; it is how far an object travels.

Displacement (s): The change in position of an object (shortest path); it requires a direction such as +, -, NESW, or an angle.

Position (x): Describes the location of an object at a certain point in time with respect to the origin (it needs direction).

Therefore, displacement is the change in position: Δ𝑥 = 𝑥final – 𝑥initial



Speed and Velocity

Speed (v): The rate of change of distance (d) of an object over time. It is scalar and therefore does not need direction. Speed = distance/time.

Velocity (v): The rate of change of displacement (s) 

Speed and velocity can be at a singular point in time or over a given time period. If it is at a singular point in time it is the instantaneous speed/velocity, which is the gradient of the point (derivatve). If it is over a given period of time, it is average speed/velocity and is calculated by total distance or displacement (depending on whether we are calculating velocity or speed) divided by the total time taken.

Change in velocity (Δ): Sub in the formula. 




Acceleration (a)

Acceleration is the rate of change of velocity of an object over time. This is a vector quantity, requiring both magnitude and direction. If an object is slowing down is can also be called deceleration.

Acceleration can also be calculated over a period of time or at a given point. Acceleration at a given point is the instantaneous acceleration and is found using the gradient of the velocity (derivative or second derivative of a displacement graph). Acceleration over a period of time is average acceleration and is found by a = (vfinal - vinitial) / t. Sometimes u is used for initial velocity and v for final velocity.



Eg. The example below shows an acceleration of -2 m s-2 or -2 meters per second per second. This means that the velocity changes by -2 m/s every second. It includes the magnitude of -2. 


Acceleration due to gravity:

A falling object accelerates toward Earth due to the force of gravity. This means that as it falls, the object speeds up. Acceleration due to gravity is 9.8m/s/s. 

However, when calculating acceleration due to gravity, air resistance must be considered. Air resistance is the friction between air and a moving object, which then reduces acceleration.

The final velocity is called “terminal velocity”



Graphing motion: position, distance, and velocity

Position-time graph: Shows how the position of an object changes over time

X-axis: Time taken Y-axis: position

Gradient: Change in position/time or displacement/time. This is the velocity of the object. It can be positive, negative, or zero.

Distance: sum of all peaks/points on the graph.

Displacement: the final position- the original position. MUST include direction (eg. +/-)

Distance-time graph: Shows the distance travelled by an object over time

X-axis: time taken Y-axis: distance

Gradient: Change in distance/time. This is the speed of the object. It can be positive or zero (not negative).

Cannot calculate displacement unless there are no turning points.

Velocity-time graph: Shows how the velocity of an object changes over time

The area under a velocity-time graph is the displacement of an object (think integral is opposite of derivative, as velocity is the derivative, to go back to displacement, we integrate, which is the area under the graph).

The acceleration of an object can be found by calculating the gradient. If it is the instantaneous acceleration, use the derivative; if it is average acceleration, use the gradient formula.




Forces and Motion

Forces: A push or a pull, measured in newtons (N). It is a vector quantity, requiring a magnitude and direction. There are many types of forces.

  1. Friction: The force exerted by a surface opposing motion. This is always in the opposite direction of the object's motion, as it is a resistive force. 

  2. Gravity: The force existing between all objects with mass

  3. Electrical: The interaction between charged objects

  4. Magnetic: The force enabling compasses to work

  5. Applied: An external force exerted on an object (eg., by a human)

  6. Drag: The force opposing motion of an object in a fluid (liquid or gas)

  7. Nuclear: The force that binds protons and neutrons together in a nucleus

  8. Normal force: The support force on an object

  9. Tension force: Force transmitted through a string or rope when it is pulled by forces acting at opposite ends.

Contact vs non-contact: Non-contact forces are those where materials do not need to be touching for the force to be effective (gravity, electrical, magnetic, nuclear). Contact forces are those where materials need to be touching for the force to be effective (friction, applied, normal, tension, drag, and air resistance).

Balanced vs unbalanced: Balanced forces do not cause a change in motion. This means the object will remain stationary or maintain a constant speed/velocity. Unbalanced forces cause acceleration or deceleration. 

Free body diagrams: Diagrams used to represent forces acting on an object.

Arrows are used to represent the direction of a force, with the length of the arrow representing the magnitude of the force.

DO NOT: sketch out the object (eg. if it is a spring, do not draw a spiral).

Eg. In a ship: upthrust = weight, as the ship floats instead of sinking or rising. The thrust is greater than the combined air resistance and friction as the ship is moving forward.

  

If an object is stationary and an unbalanced force acts on it, it will start to move. If an object is moving an an unbalanced force acts on it, it can speed up, slow down or change direction.

Weight (force due to gravity):

The mass of an object is the amount of material in the object. This does not change.

The weight of an object is the force of attraction to a large center of mass (eg., Earth, Moon, Sun, etc.), measured in Newtons (N). Weight = mass acceleration due to gravity, which is weight = mg. On Earth, this is weight = mass 9.8. The weight changes depending on the gravitational field strength.



Newton’s Laws

Newton’s first law (law of inertia:

An object at rest will stay at rest, and an object in motion will stay in motion unless an unbalanced force is applied to it. This resistance to change in motion is called inertia. 

Eg., cars have seat belts because when sudden stops happen, the car goes from a fast speed to rest. This means the body is still moving at the original speed and does not stop unless it has an opposing force, such as the tension force caused by pushing on the seatbelt, to stop it.



Newton’s second law:

If an object experiences a non-zero net force, the object will change its speed, direction, or both. To determine what amount of force is required to cause an unbalanced force, use the formula F=MA. When considering net force, make sure to consider all possible forces (eg., friction, etc.).

Force (F) net = mass (m) x acceleration (a) 



Newton’s third law: 

For every action, there is an equal and opposite reaction. Action and reaction are both forces.

It means that two forces in an interaction are always of equal size, in opposite directions, acting on the other object, and are the same type of force.

Eg., car crumple zones. When a car crashes into a wall, it pushes the wall with a force, as seen by any visible damage to the wall. At the same time, the wall also pushes back against the car with an equal and opposite force, resulting in the visible crumple on the car. The crumple zone allows for this to occur in a non-essential part of the car, keeping the passenger safe. 



Work and energy

Work: the transfer of or change in energy. When a force is being applied to an object AND the object moves, work is being done. If the object doesn’t move, no work is being done, as no energy is being transferred. Work is hence a measure of the change in energy of an object.

Energy: The ability of an object to do work or cause change. The standard unit of energy is Joules (J).

There are two main types of energy: kinetic and potential. Energy is not a force.

Kinetic energy is the energy of movement. At a microscopic level, thermal, sound, and electrical energy can be considered kinetic energy.

Potential energy is stored energy because of its position or condition. This includes gravitational, elastic, chemical, and nuclear potential energy.

Transformation of energy: Energy can be changed from one form to another. Energy is not created nor destroyed, so a “loss” of energy is just energy converted to different forms that are not being observed or utilised.

Efficiency: Useful energy output divided by energy input * 100.