Oral Exam Preparation Notes

Oral Exam Preparation Notes

General Guidelines

  • Students are instructed to write their name on designated materials (orange sheet).

  • Emphasis on reviewing the questions provided for the oral exam during class discussions.

  • Acknowledgment of Sada and Hadi during the session.

  • Students advised to refer to the marks they have for assignments.

  • Important note: 90% of the class used GenGPT for assignments, which was discouraged.

  • Strong recommendation to review assignments and reading materials in preparation for the oral exam.

Key Themes and Topics for Oral Exam

  • Waveforms and Circuit Leaks:

    • Important to remember waveform patterns (specific mention of waveforms one and four).

    • Students may be shown a waveform and must identify issues in the circuit, specifically diagnosing leaks.

    • Example: A common issue is a circuit leak; students should specify the problem (e.g., "Leak is the problem") and propose a solution (e.g., "Fix the leak").

    • Common Leak Locations:

    • Ventilator: Near the humidifier.

    • Patient: Near the endotracheal (ET) cuff.

  • BERTB (related to overdistention of the alveoli):

    • Fix by adjusting ventilation settings:

    • In volume control: Decrease tidal volume.

    • In pressure control: Decrease Peak Inspiratory Pressure (PIP).

Auto Beep and Expiratory Time

  • Auto Beep: Issue with expiration time; can increase it by:

    • Increasing Flow: Utilize bronchodilators to facilitate this adjustment.

    • Emphasis on increasing flow as the preferred method for these questions in the NBRC board exam.

Waveform Characteristics and Assisted Breaths

  • Identification of various patterns in waveforms e.g., ascending, descending, and spontaneous breaths.

  • Assisted Breath Identification: Recognized by a "fishtail" pattern in the waveform.

    • Definition: Increased work of breathing requiring sensitivity adjustments in ventilators.

  • Ventilator Terms: Must define terms related to mechanical ventilation:

    • Cycle, limit, trigger, and baseline are among the key concepts that should be understood comprehensively.

Mechanical Ventilation Questions

  • Differences Between Ventilator Modes:

    • Explain between Synchronized Intermittent Mandatory Ventilation (SIMV) and Assist Control (AC).

    • Indications for choosing AC mode (e.g., overdose cases).

    • Importance of understanding three types of dead space and indicators for adequate ventilation.

    • Get familiar with clinical indicators such as PIP alterations and various conditions affecting dynamic static compliance.

  • PEEP Utilization:

    • Essential for addressing refractory hypoxemia.

    • Conditions decreasing static and dynamic compliance should be reviewed thoroughly.

Clinical Practices and Signs

  • Understanding normal vital signs and distinguishing alarms in mechanical ventilators.

    • Numerically quantifying alarm thresholds (like PIP and apnea rates).

  • Hypoxia Signs: Knowing early signs starting from tachycardia.

  • Key point: Two differences between PEEP and CPAP mechanisms and implications.

  • Pressure Support Ventilation: Common conditions for implementing pressure support include CPAP and other modes to facilitate breathing.

  • Conditions to meet before starting weaning trials:

    • Problem reversal, acceptable PaO2 levels with low levels of PEEP, and patient alertness.

Hemodynamics and Ventilation Principles

  • Functions of Swan-Ganz Catheter: Transducers convert electrical waveforms into analog.

  • Understanding the effects of positive pressure ventilation on cardiac and renal systems.

  • Key parameters in adjusting patient's inspiratory effort through machine settings and monitoring.

Suctioning and Compliance Understanding

  • Clinical application of suctioning: correct pressure application timing post-hyperoxygenation.

  • Definitions of dynamic compliance and static compliance along with their implications in patient care.

  • Focus on protective lung strategies, including high PEEP, increased respiratory rates, and minute ventilation adjustments.

Miscellaneous Clinical Questions

  • Knowledge about common clinical scenario evaluations such as sleep apnea, COPD examinations, and conditions indicating specific secretion management techniques.

Conclusion

  • Overall recombination of information indicates that while overwhelming, students are equipped with foundational knowledge to handle the examination successfully.


General Preparation Questions
  1. Administrative and Review
    • Have you written your name on the designated orange sheet?
    • Have you thoroughly reviewed the questions provided for the oral exam in class?
    • Are you aware of your assignment marks and the recommendation to review your materials since 90%90\% of the class used discouraged GenGPT assistance?
Waveforms and Circuit Issues
  1. Diagnosis and Fixes
    • Which waveform patterns (specifically waveform 11 and 44) are critical for the oral exam?
    • If you are shown a waveform and identify a circuit leak, how would you state the problem and the solution?
    • Where are the primary locations to check for leaks in the ventilator (e.g., humidifier) and the patient (e.g., ETET cuff)?
Alveolar Overdistention and BERTB
  1. Ventilator Adjustments
    • How do you fix overdistention when using Volume Control mode (e.g., decreasing tidal volume)?
    • How do you fix overdistention when using Pressure Control mode (e.g., decreasing PIPPIP)?
Auto PEEP and Expiratory Timing
  1. Managing Flow
    • How can you resolve Auto PEEP by increasing expiration time?
    • Why is increasing flow using bronchodilators the preferred method for the NBRC board exam?
Waveform Patterns and Definitions
  1. Identification
    • Can you distinguish between ascending, descending, and spontaneous breath waveforms?
    • What does a "fishtail" pattern mean in terms of work of breathing and ventilator sensitivity?
  2. Terminology
    • Can you define the following mechanical ventilation terms: Cycle, Limit, Trigger, and Baseline?
Mechanical Ventilation Modes and Compliance
  1. Comparison of Modes
    • What are the key differences between SIMVSIMV and ACAC (Assist Control)?
    • Which cases, such as an overdose, specifically indicate the use of ACAC mode?
  2. Ventilation Indicators
    • What are the three types of dead space?
    • How do alterations in PIPPIP relate to changes in dynamic and static compliance?
  3. Oxygenation
    • Why is PEEPPEEP utilized for refractory hypoxemia?
    • What are the two main differences between the mechanisms of PEEPPEEP and CPAPCPAP?
Clinical Practices and Signs
  1. Alarms and Hypoxia
    • What are the numerical thresholds for ventilator alarms like PIPPIP and apnea rates?
    • What is the earliest clinical sign of hypoxia (starting with tachycardia)?
  2. Weaning Trials
    • What conditions must be met regarding problem reversal, PaO2PaO_{2} levels, and patient alertness before starting a weaning trial?
  3. Hemodynamics
    • How does a Swan-Ganz catheter transducer convert electrical waveforms?
    • What are the specific effects of positive pressure ventilation on the cardiac and renal systems?
Suctioning and Protective Strategies
  1. Clinical Protocols
    • What is the correct timing for suctioning after hyperoxygenation?
    • How do definitions of static and dynamic compliance impact patient care?
    • What are the core components of protective lung strategies (e.g., high PEEPPEEP, respiratory rate, and minute ventilation)?
Clinical Scenario Evaluations
  1. Specialized Care
    • How do you evaluate specific clinical scenarios like sleep apnea, COPD, and secretion management techniques?