Moving Charges and Magnetism - Comprehensive Notes

Oersted's Experiment

  • A magnetic field is produced around any current-carrying conductor.
  • Direction can be found using Ampere's swimming rule.
  • SI unit: Weber per meter squared (Wm−2Wm^{-2}) or Tesla (T).
  • 1 Tesla (T) is the magnetic field strength when a charge of 1 Coulomb moving at 1 m/s perpendicular to the field experiences a force of 1 Newton.
    1T=1Wm−2=1NA−1m−11 T = 1 Wm^{-2} = 1 NA^{-1}m^{-1}
  • CGS unit: Gauss or Oersted
    1gauss=10−4tesla1 gauss = 10^{-4} tesla

Maxwell’s Cork Screw Rule

  • Imagine a right-handed cork screw rotating such that its tip moves in the direction of the current; the thumb's rotation indicates the direction of the magnetic field lines.
  • Magnetic field coming out of the plane is represented by a dot (⊙\odot).
  • Magnetic field perpendicular to the plane in the downward direction is denoted by (⊗\otimes).

Ampere’s Swimming Rule

  • If a person swims along the wire in the direction of the current, facing the magnetic needle, the north pole of the needle deflects towards their left hand.

Magnetic Field

  • The region surrounding a magnet or current-carrying conductor where magnetic influence is felt.

Biot-Savart’s Law

  • The magnetic field (dB) produced by a current element (Idl) at a distance r: dB=μ<em>o4πIdl×rr3=μ</em>o4πIdlsinθr2dB = \frac{\mu<em>o}{4 \pi} \frac{Idl \times r}{r^3} = \frac{\mu</em>o}{4 \pi} \frac{Idl sin \theta}{r^2}
    • θ\theta is the angle between the current direction and the line joining the element to the point.
    • μo\mu_o is the absolute permeability of free space.
  • SI unit of magnetic field: Tesla (T) or Wm-2.
  • CGS unit: Gauss or Oersted (1gauss=10−4Tesla1 gauss = 10^{-4} Tesla).
  • Direction of dB is the direction of Idl×rIdl \times r.

Magnetic Field Due to a Straight Current Carrying Conductor

  • ϕ<em>1\phi<em>1 and ϕ</em>2\phi</em>2 are angles from the ends of the conductor to the observation point, relative to the perpendicular from the observation point to the conductor.
  • For an infinitely long conductor, near the center:
    B=μo4π2IrB = \frac{\mu_o}{4 \pi} \frac{2I}{r}
  • For an infinitely long conductor, near one end:
    B=μo4πIrB = \frac{\mu_o}{4 \pi} \frac{I}{r}

Magnetic Field Lines

  • Represent the magnetic B field in a region.
  • They are closed, continuous curves.
  • Tangent at any point gives the direction of the magnetic field.
  • They cannot intersect.
  • Outside a magnet: North to South.
  • Inside a magnet: South to North.
  • Field lines due to a straight current-carrying conductor are concentric circles centered on the conductor, in a plane perpendicular to it.

Right Hand Thumb Rule

  • Grip the current-carrying conductor with your right hand such that the thumb points in the direction of the current; the curled fingers indicate the direction of the magnetic field lines.

Magnetic Field on the Axis of a Current Carrying Circular Coil

  • Magnetic field at a distance x from the center O on the axis: B=μonIr22(r2+x2)3/2B = \frac{\mu_o n I r^2}{2 (r^2 + x^2)^{3/2}}
    • r = radius of the coil.
    • n = number of turns.
    • I = current.
  • At the center of the coil:
    B=μonI2rB = \frac{\mu_o nI}{2r}
  • Clockwise current = South polarity face.
  • Anti-clockwise current = North polarity face.

Magnetic Dipole

  • Every current-carrying loop is a magnetic dipole (like a bar magnet).
  • Has a South (S) and North (N) pole.
  • Magnetic moment (M) magnitude: ∣M∣=NiA|M| = NiA
    • N = number of turns.
    • i = current.
    • A = area of the loop.
  • The current loop behaves like a small magnetic dipole, with one face acting as the north pole and the other as the south pole.

Ampere’s Circuital Law

  • The line integral of magnetic field induction B around any closed path in vacuum is equal to μ<em>0\mu<em>0 times the total current threading the closed path. ∮B⋅dl=μ</em>oI\oint B \cdot dl = \mu</em>o I
    • B is the magnetic field.
    • dl is a small element of the closed path.
    • μo\mu_o is the absolute permeability of free space.
    • I is the current.
  • Ampere’s law is valid for any closed path, regardless of size or shape.

Solenoid

  • A closely wound helix of insulated copper wire.
  • Magnetic field inside a long solenoid: B=μonIB = \mu_o nI
    • n = number of turns per unit length.
    • I = current.
  • Magnetic field at one end of a long solenoid:
    B=μonI2B = \frac{\mu_o nI}{2}

Toroid

  • A toroidal solenoid is an anchor ring with many turns of copper wire wrapped around it.
  • Essentially an endless solenoid in the shape of a ring.
  • Magnetic field inside the turns:
    B=μonIB = \mu_o nI
  • The magnetic field is constant and tangential to the circular closed path inside the toroid.
  • Magnetic field in the empty space inside and outside the toroid is zero because the net enclosed current is zero.

Magnetic Field Due to a Current Carrying Long Circular Cylinder

  • Outside the cylinder (r > R):
    B=μo2πIrB = \frac{\mu_o}{2 \pi} \frac{I}{r}
  • Inside the cylinder (thin metal sheet):
    B=0B = 0
  • Inside the cylinder (uniform current distribution, r < R): B=μ<em>oμ</em>r2πIrR2B = \frac{\mu<em>o \mu</em>r}{2 \pi} \frac{Ir}{R^2}
    • μ<em>o\mu<em>o and μ</em>r\mu</em>r are permeabilities of free space and the cylinder material, respectively.
    • I is the current.
    • r is the radius.

Force Acting on a Charge Particle Moving in a Uniform Magnetic Field

  • F=q(v×B)F = q(v \times B)∣F∣=Bqvsinθ|F| = Bqv sin \theta
    • B = magnetic field intensity.
    • q = charge.
    • v = speed.
    • θ\theta = angle between magnetic field and motion direction.
  • Force is perpendicular to both B and v.
  • Direction from Fleming’s left-hand rule.

Magnetic Force on a Current Carrying Conductor in a Uniform Magnetic Field

  • F=I(l×B)F = I(l \times B)

Fleming’s Left-Hand Rule

  • Stretch thumb, forefinger, and central finger of the left hand mutually perpendicular.
  • Forefinger = magnetic field direction.
  • Central finger = current direction.
  • Thumb = force direction.

Lorentz Force

  • Total force on a charge moving in electric and magnetic fields:
    F=q(E+v×B)F = q(E + v \times B)

Motion of a Charged Particle in a Uniform Magnetic Field

  • Entering normal to the field, it follows a circular path. r=mvBqr = \frac{mv}{Bq}
    • r ∝ mv.
    • r ∝ 1/(q/m).
  • Time period:
    T=2πmBqT = \frac{2\pi m}{Bq}
  • Entering at an angle θ\theta (except 90°), it follows a helical path.
    r=mvsinθBqr = \frac{mv sin \theta}{Bq}
  • Pitch of the helix:
    Pitch=Tvcosθ=2πmvcosθBqPitch = T v cos \theta = \frac{2\pi m v cos \theta}{Bq}

Cyclotron

  • Device to accelerate positively charged particles (protons, deuterons, etc.).

Principle

  • A charged particle is accelerated through a moderate electric field by crossing it repeatedly using a strong magnetic field.
  • Radius of the circular path:
    r=mvBqr = \frac{mv}{Bq}
  • Cyclotron frequency: v=Bq2πmv = \frac{Bq}{2\pi m}
    • m and q are mass and charge of the ion.
    • B is the magnetic field strength.
  • Maximum kinetic energy gained: E<em>max=B2q2r</em>o22mE<em>{max} = \frac{B^2 q^2 r</em>o^2}{2m}
    • ror_o = maximum radius of the circular path.
  • Relativistic mass correction: m=mo1−v2c2m = \frac{m_o}{\sqrt{1 - \frac{v^2}{c^2}}}
    • m = mass of the ion at speed v.
    • mom_o = rest mass of the ion.
    • c = speed of light.

Limitations of the Cyclotron

  • Cannot accelerate uncharged particles (neutrons).
  • Positively charged particles with large mass (ions) cannot reach limitless speeds.

Force between Two Infinitely Long Parallel Current Carrying Conductors

  • Attractive if currents are in the same direction; Repulsive if in opposite directions.
  • If currents in both parallel wires are equal and in the same direction, the magnetic field at a point exactly halfway between the wires is zero.

Torque Acting on a Current Carrying Coil Placed Inside a Uniform Magnetic Field

  • τ=NBIAsinθ\tau = NBIA sin \theta
    • N = number of turns.
    • B = magnetic field intensity.
    • I = current.
    • A = area of cross-section.
    • θ\theta = angle between magnetic field and normal to the coil plane.

Moving Coil Galvanometer

  • Device for detection and measurement of currents.

In equilibrium

  • Deflecting torque = restoring torque. kθ=NBIAk \theta = NBIA
    • k = restoring torque per unit twist.
    • N = number of turns.
    • B = magnetic field intensity.
    • A = area of cross-section.
    • θ\theta = angle of twist.

Current Sensitivity

  • Deflection per unit current.
    Is=θI=NBAKI_s = \frac{\theta}{I} = \frac{NBA}{K}

Voltage Sensitivity

  • Deflection per unit voltage. Vs=θV=NBAKRV_s = \frac{\theta}{V} = \frac{NBA}{KR}
    • R is the resistance of the galvanometer.

Sensitive Galvanometer Requirements

  • N should be large.
  • B should be large.
  • A should be large.
  • K should be small.

Ammeter

  • Low resistance galvanometer for measuring current in a circuit; connected in series.

Conversion of Galvanometer to Ammeter

  • Connect a low resistance (shunt) in parallel with the galvanometer.
  • If G is galvanometer resistance and I<em>gI<em>g is the full-scale deflection current, then the required shunt resistance S for an ammeter of range I is: S=I</em>gGI−IgS = \frac{I</em>g G}{I - I_g}
  • Ideal ammeter resistance is zero.

Voltmeter

  • High resistance galvanometer for measuring potential difference; connected in parallel.
  • Ideal voltmeter resistance is infinity.

Conversion of Galvanometer to Voltmeter

  • Connect a high resistance in series with the galvanometer.
  • If G is galvanometer resistance and I<em>gI<em>g is the full-scale deflection current, then the required series resistance R for a voltmeter of range V is: R=VI</em>g−GR = \frac{V}{I</em>g} - G

Multiple Choice Questions and Answers(Key Explanations):

  1. Zero. Alpha particle's work done in a magnetic field is always zero because the magnetic force is perpendicular to the velocity.

  2. Repulsive. Anti-parallel currents repel.

  3. 2490 Ω. Use the formula R=V/I<em>g−GR = V/I<em>g - G, where V = 2.5V, I</em>gI</em>g = 1mA, G = 10Ω.

  4. Concave. Concave magnets provide a radial magnetic field for maximum torque.

  5. Large deflection for a small current. Sensitivity is high deflection for minimal current.

  6. B = μo nl, where n = number of turns per unit length (n = N/L).
    So, 1 = μo nr I, where nr is the relative permeability (μr).
    Given: I = 2 Amp, N = 400 turns, L = 40 cm = 0.4 m. B = 1 Tesla.
    n=400/0.4=1000 turns/m.
    μo = 4π x 10-7 T.m/A.
    rearranging to calculate relative permeability by this formula:
    1 = (4π x 10-7 ) nr (1000) (2)
    nr = 1/(4π x 10-7 x 1000 x 2 ) =397.88, so μr ~ 400

  7. 22V. Use the formula for the induced EMF ($\varepsilon = - \frac{d \phi}{dt}$$), the EMF induced in the coil in 2 seconds is 22V.

  8. 4:π. The magnetic moment of square coil is I A = I \times (L/4)^2 and the magnetic moment of circular loop is I A = I \pi r^2 = I \pi (L/2π)^2. Thus, the ratio of their magnetic moment becomes (I (L/4)^2)/ (I \pi (L/2π)^2) = 4/π

  9. Torsional constant (k). Increasing current sensitivity involves decreasing the torsional constant.

  10. 4B. The magnetic field at the center of the original loop is B = μo I / (2R).If the that the same wire is looped into a coil of two turns, the new magnetic field is Bnew = μo (2I)/ (2R/2) = 4 B.

  11. 2𝜋 × 10−3 T. The magnetic field inside the Solenoid formula is B = μo n I and substituting the values from the question yields 2 𝜋 × 10−3 T.

  12. Halved. If the distance will be doubled, the force will be halved, because the force is inversely proportional to the distance between them

  13. Provide electromagnetic damping. Using a metal frame reduce the swinging momentum providing electromagnetic damping to the coil

  14. Suitable low resistance in parallel. The ammeter should be connected with a low parallel resistance

  15. 100 keV. Comparing the formulas for the radius of circular orbits of deuteron and proton. The kinetic energy of the proton that describes a circular orbit of same radius and inside same B is 100 keV.

  16. Both (a) and (b). The outside magnetic field due to a long straight conductor carrying a constant current is independent of both the Material and Radius of the conductor.

  17. F = q (E + v X B)

  18. They must be unlike charges.

  19. The neutron will go undeflected.

  20. v = E/B This Equation relates the speed of the moving charge (v) and the net electromagnetic force it experiences (E=electric field intensity, B=magnetic field)

  21. 10−5T

  22. It is uniform inside the major part of the solenoid.

  23. The conductors exert equal and opposite forces on each other irrespective of the directions of currents Two parallel conductors exert equal and opposite forces on each of the of each other.

  24. 1A

  25. zero

  26. 1kg s -2 A-1

  27. Am2

  28. 5985 Ω in series with the coil.

  29. 0.004 Ω in parallel with the coil.

  30. The magnitude of magnetic moment now diminishes.

  31. kinetic energy remains constant

  32. 1 Tesla When a force of 1N is acting on a charge a magnitude of the magnetic field is 1 Tesla

  33. The electron will continue to move with uniform velocity along the axis of the solenoid.

  34. equal to magnetic field at Q

  35. directly proportional to the magnetic field strength.

  36. 0.10 Ω

  37. Wb.m-2

  38. Move towards the wire the forces between two loops is always attractive.

  39. Rd =2Rp

  40. ( μ0I/4R)(π+2)

  41. Radius of the solenoid

  42. 9.27x10^-24 Am2

  43. Repulsive force of 10^-5N/m

  44. Directly proportional to the square of the length of the wire in the coil

  45. 1:1

  46. 4B

  47. no force

  48. east

  49. no force

  50. none is damaged the instruments are ideal.

  51. G/9

  52. Attract each other with a force of μ˳i2/(2πd)

  53. 1/ G

  54. only outside the pipe

  55. perpendicular to the magnetic field

  56. 495ohm

  57. Cylindrical symmetry

  58. B is perpendicular to v

  59. both electric and magnetic field

  60. F = qE + q (v x B)

  61. zero, if B and v are parallel

  62. 0.001 Ω

  63. due west

  64. zero only at the centre of the loop

  65. perpendicular to the plane of the paper, directed into the paper

  66. μ0ne/2r

  67. shape of loop

  68. 5 × 10-5

  69. Torque only.

  70. 2B The magnetic field is inversely proportional to the distance r.

  71. 𝑛𝑟2/(𝑥2+𝑟2)3/2 Magnetic field due to a ring is directly proportional to the number of turns and the square of the radius of the ring, also inversely proportional to (𝑥2+𝑟2)3/2.

  72. 2√2

  73. √3r Since the magnetic field will be 1/8 of its value at the centre then 1/8=(r^2/(x^2+r^2 ) )^(3/2). Solving get get that (x =sqrt3r).

  74. Path of motion Kinetic energy, speed, and angular velocity do not vary while the path of motion will vary.

  75. anticlockwise

  76. The gravitational force on the conductor is balanced by external magnetic field.

  77. ½

  78. 3 cm

  79. 0.8 A The current to the shunt is 0.8 A given that the total current is 1A.

  80. 7.8 X 10-4 N (Attractive)

  81. decrease by 4%

  82. 𝐵/2 Magnetic Field is inversely proportional to the radius of the radius, hence it will now be halved.

  83. Momentum of particle Radius is directly proportional to the momentum of the particle

  84. 12 N in -z direction

  85. zero

  86. (μ0I/2R)(1- 1 /π)

  87. 0.02 Ώ

  88. A is more sensitive than B since the current required for galvanometer A is lower than the current require for galvanometer B to produce the the same deflection

  89. 2 x 10 -5 Tesla acting downward

  90. -2F/3