Comprehensive Reference Notes on Seconde Scientifique Mathematics

Calculations in the Real Numbers and Approximations

Real arithmetic operates on powers satisfying the fundamental exponent rules am×ap=am+pa^m \times a^p = a^{m+p}, (am)p=am×p(a^m)^p = a^{m \times p}, and (ab)m=ambm(ab)^m = a^m b^m. Scientific notation expresses a real number as a×10pa \times 10^p, where aa is a decimal with a single non-zero leading digit and p∈Zp \in \mathbb{Z}. Standard algebraic expansions include the quadratic identities (a±b)2=a2±2ab+b2(a \pm b)^2 = a^2 \pm 2ab + b^2 and (a+b)(a−b)=a2−b2(a+b)(a-b) = a^2 - b^2, along with cubic identities (a±b)3=a3±3a2b+3ab2±b3(a \pm b)^3 = a^3 \pm 3a^2b + 3ab^2 \pm b^3 and a3±b3=(a±b)(a2∓ab+b2)a^3 \pm b^3 = (a \pm b)(a^2 \mp ab + b^2).

Radicals are defined for non-negative reals such that (a)2=a(\sqrt{a})^2 = a, satisfying ab=ab\sqrt{ab} = \sqrt{a}\sqrt{b} and a2=∣a∣\sqrt{a^2} = |a|. The absolute value is defined piecewise by ∣x∣=x|x| = x when x≥0x \ge 0 and ∣x∣=−x|x| = -x when x≤0x \le 0. It obeys the triangle inequalities ∣x+y∣≤∣x∣+∣y∣|x+y| \le |x| + |y| and ∣∣x∣−∣y∣∣≤∣x−y∣||x| - |y|| \le |x-y|. For any positive real aa, the condition ∣x∣≤a|x| \le a is equivalent to −a≤x≤a-a \le x \le a, while ∣x∣≥a|x| \ge a corresponds to x≤−ax \le -a or x≥ax \ge a.

A bounded interval [a,b][a, b] has a center c=a+b2c = \frac{a+b}{2}, a radius r=b−a2r = \frac{b-a}{2}, and an amplitude A=b−aA = b-a, which corresponds to the distance statement d(x,c)=∣x−c∣≤rd(x, c) = |x-c| \le r. Approximating a real number at order nn involves truncating by defect or excess within an interval of amplitude 10−n10^{-n}. The integer part E(x)E(x) represents the greatest integer less than or equal to xx, satisfying the framing inequality E(x)≤x<E(x)+1E(x) \le x < E(x) + 1.

Vector Calculus and Barycenters

A vector AB⃗\vec{AB} is characterized by its direction, its sense from AA to BB, and its norm ∥AB⃗∥\|\vec{AB}\|. Vector addition is governed by the Chasles relation AB⃗+BC⃗=AC⃗\vec{AB} + \vec{BC} = \vec{AC} and the parallelogram rule. Two non-zero vectors u⃗\vec{u} and v⃗\vec{v} are collinear if and only if there exists a scalar kk such that v⃗=ku⃗\vec{v} = k\vec{u}, which serves as the criterion for point alignment and line parallelism.

For two weighted points (A,α)(A, \alpha) and (B,β)(B, \beta) with α+β≠0\alpha + \beta \neq 0, the barycenter GG is the unique point defined by αGA⃗+βGB⃗=0⃗\alpha \vec{GA} + \beta \vec{GB} = \vec{0}, leading to the position formula AG⃗=βα+βAB⃗\vec{AG} = \frac{\beta}{\alpha + \beta}\vec{AB}. For any arbitrary point MM, vector reduction satisfies αMA⃗+βMB⃗=(α+β)MG⃗\alpha \vec{MA} + \beta \vec{MB} = (\alpha + \beta)\vec{MG}. If α=β\alpha = \beta, the point GG is the isobarycenter and coincides with the midpoint of the segment [AB][AB].

For three weighted points (A,α)(A, \alpha), (B,β)(B, \beta), and (C,γ)(C, \gamma) where α+β+γ≠0\alpha + \beta + \gamma \neq 0, the barycenter satisfies αGA⃗+βGB⃗+γGC⃗=0⃗\alpha \vec{GA} + \beta \vec{GB} + \gamma \vec{GC} = \vec{0} and the reduction αMA⃗+βMB⃗+γMC⃗=(α+β+γ)MG⃗\alpha \vec{MA} + \beta \vec{MB} + \gamma \vec{MC} = (\alpha + \beta + \gamma)\vec{MG}. By the associative property of barycenters, a subset of points can be replaced by their partial barycenter assigned the sum of their respective weights, provided that this sum is non-zero.

Quadratic Equations and Inequalities

A quadratic trinomial T(x)=ax2+bx+cT(x) = ax^2 + bx + c with a≠0a \neq 0 can be written in its canonical form a[(x+b2a)2−Δ4a2]a\left[\left(x + \frac{b}{2a}\right)^2 - \frac{\Delta}{4a^2}\right], where Δ=b2−4ac\Delta = b^2 - 4ac is the discriminant. When bb is even, the reduced discriminant Δ′=(b′)2−ac\Delta' = (b')^2 - ac can be utilized with b′=b2b' = \frac{b}{2}.

The equation ax2+bx+c=0ax^2 + bx + c = 0 has no real solutions if Δ<0\Delta < 0. If Δ=0\Delta = 0, it has a single double root x0=−b2ax_0 = -\frac{b}{2a}, factorizing as a(x−x0)2a(x - x_0)^2. If Δ>0\Delta > 0, it yields two distinct real solutions x1,x2=−b±Δ2ax_1, x_2 = \frac{-b \pm \sqrt{\Delta}}{2a}, factorizing as a(x−x1)(x−x2)a(x - x_1)(x - x_2). The trinomial takes the sign of aa outside the roots and the sign of −a-a between the roots. When Δ≤0\Delta \le 0, the trinomial maintains the sign of aa for all real values where it is non-zero.

The roots of a quadratic equation satisfy the sum and product relationships S=x1+x2=−baS = x_1 + x_2 = -\frac{b}{a} and P=x1x2=caP = x_1 x_2 = \frac{c}{a}. Finding two real numbers whose sum is SS and product is PP is equivalent to solving X2−SX+P=0X^2 - SX + P = 0, which admits real solutions if and only if S2−4P≥0S^2 - 4P \ge 0. For parametric quadratic equations, the existence and signs of the roots are established by analyzing the simultaneous signs of Δ\Delta, PP, and SS.

Oriented Angles and Trigonometry

Angular measurements convert between degrees θ\theta and radians α\alpha through the proportion απ=θ180\frac{\alpha}{\pi} = \frac{\theta}{180}. The principal measure of an oriented angle is the unique measurement belonging to the interval ]−π,π]]-\pi, \pi], while all other measures are given by α+2kπ\alpha + 2k\pi with k∈Zk \in \mathbb{Z}.

On the unit trigonometric circle parameterized by an angle α\alpha, the coordinates of the corresponding point define (cos⁡(α),sin⁡(α))(\cos(\alpha), \sin(\alpha)), and the tangent is given by tan⁡(α)=sin⁡(α)cos⁡(α)\tan(\alpha) = \frac{\sin(\alpha)}{\cos(\alpha)} for α≠π2+kπ\alpha \neq \frac{\pi}{2} + k\pi. These lines satisfy the fundamental identity cos⁡2(α)+sin⁡2(α)=1\cos^2(\alpha) + \sin^2(\alpha) = 1 and 1+tan⁡2(α)=1cos⁡2(α)1 + \tan^2(\alpha) = \frac{1}{\cos^2(\alpha)}.

Symmetries across the trigonometric circle yield the associated angle relationships: cos⁡(−α)=cos⁡(α)\cos(-\alpha) = \cos(\alpha) and sin⁡(−α)=−sin⁡(α)\sin(-\alpha) = -\sin(\alpha); cos⁡(π−α)=−cos⁡(α)\cos(\pi - \alpha) = -\cos(\alpha) and sin⁡(π−α)=sin⁡(α)\sin(\pi - \alpha) = \sin(\alpha); cos⁡(π+α)=−cos⁡(α)\cos(\pi + \alpha) = -\cos(\alpha) and sin⁡(π+α)=−sin⁡(α)\sin(\pi + \alpha) = -\sin(\alpha); along with the complementary relations cos⁡(π2−α)=sin⁡(α)\cos\left(\frac{\pi}{2} - \alpha\right) = \sin(\alpha) and sin⁡(π2−α)=cos⁡(α)\sin\left(\frac{\pi}{2} - \alpha\right) = \cos(\alpha).

Polynomials and Rational Fractions

A polynomial of degree nn has the form P(x)=anxn+an−1xn−1+⋯+a1x+a0P(x) = a_n x^n + a_{n-1}x^{n-1} + \dots + a_1 x + a_0 with an≠0a_n \neq 0. A real number α\alpha is a root of P(x)P(x) if and only if P(α)=0P(\alpha) = 0, which is equivalent to P(x)P(x) being divisible by (x−α)(x - \alpha). The factorization P(x)=(x−α)Q(x)P(x) = (x - \alpha)Q(x) is determined through polynomial Euclidean division, the method of undetermined coefficients, or Horner's algorithm.

A rational fraction is defined by f(x)=N(x)D(x)f(x) = \frac{N(x)}{D(x)}, where N(x)N(x) and D(x)D(x) are polynomials with D(x)≠0D(x) \neq 0. Its domain of definition excludes all real roots of the denominator: Df={x∈R∣D(x)≠0}D_f = \{x \in \mathbb{R} \mid D(x) \neq 0\}. The sign of a rational fraction is evaluated using sign tables of its irreducible factors, and decomposition into simpler terms is performed by carrying out Euclidean division when the degree of N(x)N(x) is greater than or equal to the degree of D(x)D(x).

Scalar Product and Analytic Geometry

The scalar product of two vectors u⃗\vec{u} and v⃗\vec{v} can be evaluated through orthogonal projection as u⃗⋅v⃗=OA‾×OH‾\vec{u} \cdot \vec{v} = \overline{OA} \times \overline{OH}, trigonometrically as u⃗⋅v⃗=∥u⃗∥×∥v⃗∥×cos⁡(u⃗,v⃗)\vec{u} \cdot \vec{v} = \|\vec{u}\| \times \|\vec{v}\| \times \cos(\vec{u}, \vec{v}), or via Al-Kashi's theorem in a triangle BC2=AB2+AC2−2AB×ACcos⁡(BAC^)BC^2 = AB^2 + AC^2 - 2AB \times AC \cos(\widehat{BAC}). In an orthonormal coordinate system, the dot product of u⃗(x,y)\vec{u}(x, y) and v⃗(x′,y′)\vec{v}(x', y') is given by u⃗⋅v⃗=xx′+yy′\vec{u} \cdot \vec{v} = xx' + yy'.

Two non-zero vectors are orthogonal if and only if u⃗⋅v⃗=0\vec{u} \cdot \vec{v} = 0, which translates analytically to xx′+yy′=0xx' + yy' = 0. A line passing through A(xA,yA)A(x_A, y_A) with normal vector n⃗(a,b)\vec{n}(a, b) has the cartesian equation a(x−xA)+b(y−yA)=0a(x - x_A) + b(y - y_A) = 0, yielding the general form ax+by+c=0ax + by + c = 0.

A circle with center Ω(x0,y0)\Omega(x_0, y_0) and radius rr has the cartesian equation (x−x0)2+(y−y0)2=r2(x - x_0)^2 + (y - y_0)^2 = r^2. Alternatively, a circle defined with diameter [AB][AB] is described by the locus of points M(x,y)M(x, y) satisfying the orthogonality condition AM⃗⋅BM⃗=0\vec{AM} \cdot \vec{BM} = 0, leading to (x−xA)(x−xB)+(y−yA)(y−yB)=0(x - x_A)(x - x_B) + (y - y_A)(y - y_B) = 0.

Real Functions and Graph Analysis

A function ff maps an element xx from its domain DfD_f to a unique image f(x)f(x). A function is even if its domain is symmetric with respect to zero and f(−x)=f(x)f(-x) = f(x), meaning its curve is symmetric about the yy-axis. A function is odd if its domain is symmetric and f(−x)=−f(x)f(-x) = -f(x), producing rotational symmetry about the origin.

The rate of change between two distinct points is Tf(x,y)=f(x)−f(y)x−yT_f(x, y) = \frac{f(x) - f(y)}{x - y}. A positive rate of change on an interval signifies a strictly increasing function, whereas a negative rate of change indicates a strictly decreasing function. Standard reference functions include the square function x↦x2x \mapsto x^2 (parabola, decreasing on ]−∞,0]]-\infty, 0], increasing on [0,+∞[[0, +\infty[), the cube function x↦x3x \mapsto x^3 (strictly increasing on R\mathbb{R}), the inverse function x↦1xx \mapsto \frac{1}{x} (hyperbola, decreasing on ]−∞,0[]-\infty, 0[ and ]0,+∞[]0, +\infty[), and the square root function x↦xx \mapsto \sqrt{x} (increasing on [0,+∞[[0, +\infty[).

Cartesian Coordinate Systems and Straight Lines

On an affine axis (O,i⃗)(O, \vec{i}), the position of a point is determined by its algebraic measure OM‾=x\overline{OM} = x, and the measure of a segment is AB‾=xB−xA\overline{AB} = x_B - x_A. In the plane, two vectors u⃗(x,y)\vec{u}(x, y) and v⃗(x′,y′)\vec{v}(x', y') are collinear if and only if their determinant vanishes: det⁡(u⃗,v⃗)=xy′−x′y=0\det(\vec{u}, \vec{v}) = xy' - x'y = 0.

A line passing through A(x0,y0)A(x_0, y_0) with direction vector u⃗(α,β)\vec{u}(\alpha, \beta) admits the parametric system x=αt+x0x = \alpha t + x_0 and y=βt+y0y = \beta t + y_0 where t∈Rt \in \mathbb{R}. Eliminating the parameter tt yields the cartesian equation ax+by+c=0ax + by + c = 0. When b≠0b \neq 0, the line can be written in reduced form as y=mx+py = mx + p, where m=−abm = -\frac{a}{b} is the slope and p=−cbp = -\frac{c}{b} is the yy-intercept.

Two lines are parallel if their direction vectors are collinear, and they are orthogonal if their normal vectors satisfy aa′+bb′=0aa' + bb' = 0. The intersection of two non-parallel lines represents the unique solution to the simultaneous system formed by their respective linear equations.