Linear Momentum Conservation, Collision Dynamics, and Two-Dimensional Scattering

Foundations and Origins of Conservation Laws

  • Nature of Linear Momentum:

    • Momentum is not a static quantity stored like funds in a bank account.
    • While frequently conceptualized as a physical currency, momentum is fundamentally dynamic and continually flows through boundaries and surfaces.
    • In a multi-body collision such as a three-ball system or Newton's cradle, momentum transferred from two incoming balls into a third ball propagates forward as an internal elastic wave, reflects back, divides at the contact interface, and results in two balls being propelled forward.
  • Spatiotemporal Symmetries and Continuity:

    • The conservation laws in physics are intrinsically tied to continuous spacetime symmetries (formalized by Noether's theorem):
      • Conservation of Energy: Arises directly from the continuity of time. Time flows continuously without branching into alternate timelines; even if fluctuations occur, paths rapidly reconnect.
      • Conservation of Linear Momentum: Arises directly from the continuity of physical space. Space possesses no fundamental gaps, cracks, or punctures through which matter or momentum can vanish into alternate universes.
  • Philosophical and Textual Parallels to Conservation:

    • Conservation principles and fundamental physical laws (zeroth laws) share conceptual parallels with foundational scriptural commands regarding continuity and hearing across generations:
      • Deuteronomy 4: Exhorts Israel to hear and obey statutory decrees so that life and well-being persist in the promised land.
      • Deuteronomy 6: States the Shema: hear, O Israel, the Lord our God, the Lord is one; commands loving God with all the heart, soul, and strength.
      • Ezekiel 37: Details the vision of dry bones hearing the word to receive life and restoration.
      • John 5: Declares that an appointed time has come when the dead in their graves will hear the voice of the Son of God and emerge—those who have done good to everlasting life, and those who have done evil to condemnation.
    • While intellectual worldviews reside within human cognition, the voice of enduring truth cannot be taught as mere academic abstraction; it must be vocalized and transmitted across generations.

Conservation of Linear Momentum Derivation

  • Fundamental Conservation Principle:

    • In an isolated system, the net change in linear momentum across any temporal interval is zero:         Δpnet=0\Delta p_{\text{net}} = 0
  • Two-Object Formulation:

    • For an isolated system consisting of two interacting bodies, designated as object aa and object bb, the sum of their individual momentum changes over time equals zero:         Δpa+Δpb=0\Delta p_a + \Delta p_b = 0
    • Isolating the momentum variation of object bb:         Δpb=−Δpa\Delta p_b = -\Delta p_a
    • Expanding each change in momentum as the final event (event 1) minus the initial event (event 0):         pb1−pb0=−(pa1−pa0)p_{b1} - p_{b0} = -(p_{a1} - p_{a0})
    • Distributing the negative sign:         pb1−pb0=−pa1+pa0p_{b1} - p_{b0} = -p_{a1} + p_{a0}
    • Rearranging terms to group equivalent temporal events:         pa1+pb1=pa0+pb0p_{a1} + p_{b1} = p_{a0} + p_{b0}
    • The total linear momentum of the system after an interaction is strictly equal to the total linear momentum prior to the interaction.
    • This equality holds universally between any two distinct events across time, whether involving an explicit impact or any general closed interaction.
    • Focus is typically restricted to successive, closely spaced moments (such as rapid collisions) to avoid disguised external forces or unaccounted environmental processes that could obscure the conservation balance.

Perfectly Inelastic Collisions in One Dimension

  • Definition and Constraints:

    • Elasticity denotes bounce and stretch; an inelastic interaction denotes the complete absence of bounce and stretch.
    • In a perfectly inelastic collision, the colliding bodies coalesce upon impact, sticking together permanently.
    • Kinematically, both bodies share identical post-collision velocities:         v1=va1=vb1v_1 = v_{a1} = v_{b1}
    • The single unknown after impact is the common velocity v1v_1 of the coalesced aggregate mass.
  • Algebraic Expression:

    • Substituting the common velocity into the momentum conservation equation:         mava0+mbvb0=mav1+mbv1m_a v_{a0} + m_b v_{b0} = m_a v_1 + m_b v_1
    • Factoring the total combined mass:         mava0+mbvb0=(ma+mb)v1m_a v_{a0} + m_b v_{b0} = (m_a + m_b) v_1
    • Solving for the common final velocity v1v_1:         v1=mava0+mbvb0ma+mbv_1 = \frac{m_a v_{a0} + m_b v_{b0}}{m_a + m_b}

Case Study: Football Tackle Inelastic Collision

  • System Parameters:

    • Linebacker (Player aa):
      • Mass: ma=105 kgm_a = 105\,kg
      • Initial velocity: va0=10 m/sv_{a0} = 10\,m/s
    • Quarterback (Player bb):
      • Mass: mb=85 kgm_b = 85\,kg
      • Initial velocity: vb0=−12 m/sv_{b0} = -12\,m/s (traveling in the opposing direction along the defined positive x-axis)
    • Combined system mass:         mtotal=ma+mb=105 kg+85 kg=190 kgm_{\text{total}} = m_a + m_b = 105\,kg + 85\,kg = 190\,kg
  • Calculation of Common Final Velocity:

    • Substitution into the inelastic momentum balance:         v1=(105 kg)(10 m/s)+(85 kg)(−12 m/s)190 kgv_1 = \frac{(105\,kg)(10\,m/s) + (85\,kg)(-12\,m/s)}{190\,kg}
    • Evaluating individual momentum values in the numerator:
      • Linebacker initial momentum: pa0=(105 kg)(10 m/s)=1050 kg m/sp_{a0} = (105\,kg)(10\,m/s) = 1050\,kg\,m/s
      • Quarterback initial momentum: pb0=(85 kg)(−12 m/s)=−1020 kg m/sp_{b0} = (85\,kg)(-12\,m/s) = -1020\,kg\,m/s
    • Summing to find the net momentum:         pnet=1050 kg m/s−1020 kg m/s=30 kg m/sp_{\text{net}} = 1050\,kg\,m/s - 1020\,kg\,m/s = 30\,kg\,m/s
    • Computing the resulting velocity:         v1=30 kg m/s190 kg≈0.16 m/sv_1 = \frac{30\,kg\,m/s}{190\,kg} \approx 0.16\,m/s
    • Because the linebacker possesses a 30 kg m/s30\,kg\,m/s momentum advantage, the combined players drift forward at 0.16 m/s0.16\,m/s along the positive x-axis, driving the quarterback backward.
  • Units of Momentum:

    • Derived from mass multiplied by velocity, the standard SI unit of linear momentum is kilogram-meters per second (kg m/skg\,m/s).

One-Dimensional Elastic Collisions and Mass Ratios

  • Governing Conditions:

    • An elastic collision requires the simultaneous conservation of linear momentum and kinetic energy.
    • In a one-dimensional interaction, there are two unknown post-collision velocities (va1v_{a1} and vb1v_{b1}), requiring a system of two independent equations:
      • Linear Momentum Conservation:             mava0+mbvb0=mava1+mbvb1m_a v_{a0} + m_b v_{b0} = m_a v_{a1} + m_b v_{b1}
      • Kinetic Energy Conservation:             12mava02+12mbvb02=12mava12+12mbvb12\frac{1}{2} m_a v_{a0}^2 + \frac{1}{2} m_b v_{b0}^2 = \frac{1}{2} m_a v_{a1}^2 + \frac{1}{2} m_b v_{b1}^2
  • Relative Velocity Relationship:

    • By grouping terms by mass and dividing the kinetic energy equation by the momentum equation, the quadratic energy relationship reduces to a linear relationship between the initial and final velocities:         va0+va1=vb0+vb1v_{a0} + v_{a1} = v_{b0} + v_{b1}
    • This indicates that the relative velocity of recession equals the negative of the relative velocity of approach:         vb1−va1=−(vb0−va0)v_{b1} - v_{a1} = -(v_{b0} - v_{a0})
  • Solution for Target Initially at Rest (vb0=0v_{b0} = 0):

    • Selecting an inertial reference frame where object bb is initially stationary simplifies the system.
    • Solving for the final velocity of the struck object (vb1v_{b1}):         vb1=(21+mbma)va0v_{b1} = \left( \frac{2}{1 + \frac{m_b}{m_a}} \right) v_{a0}
    • Solving for the final velocity of the incident object (va1v_{a1}):         va1=(ma−mbma+mb)va0v_{a1} = \left( \frac{m_a - m_b}{m_a + m_b} \right) v_{a0}
  • Limiting Mass Cases:

    • Case 1: Equal Masses (mb=mam_b = m_a):
      • The mass ratio mbma=1\frac{m_b}{m_a} = 1.
      • The denominator becomes 1+1=21 + 1 = 2, yielding:             vb1=(22)va0=va0v_{b1} = \left( \frac{2}{2} \right) v_{a0} = v_{a0}
      • Substituting back into the relative velocity formula:             va1=0v_{a1} = 0
      • The incident object halts completely, transferring its entire velocity and momentum to the stationary target.
    • Case 2: Supermassive Target (mb≫mam_b \gg m_a):
      • The ratio mbma→∞\frac{m_b}{m_a} \rightarrow \infty, making the denominator extremely large:             vb1≈0v_{b1} \approx 0
      • Applying the relative velocity relation (va0+va1=0+0v_{a0} + v_{a1} = 0 + 0):             va1=−va0v_{a1} = -v_{a0}
      • The light incident object rebounds with equal speed in the opposite direction, as observed when a ball bounces elastically off the Earth.

Two-Body Collision Dynamics: Truck and Stationary Car

  • System Specifications:

    • Truck (Mass MM): M=20,000 kgM = 20{,}000\,kg, initial speed V0=1 m/sV_0 = 1\,m/s
    • Car (Mass mm): m=2,000 kgm = 2{,}000\,kg, initial speed v0=0 m/sv_0 = 0\,m/s
  • Conservation Equations:

    • Momentum Balance:MV0=MV1+mv1M V_0 = M V_1 + m v_1V0=V1+(mM)v1V_0 = V_1 + \left( \frac{m}{M} \right) v_1
    • Kinetic Energy Balance:12MV02=12MV12+12mv12\frac{1}{2} M V_0^2 = \frac{1}{2} M V_1^2 + \frac{1}{2} m v_1^2
      • Factoring out the factor of 12\frac{1}{2} throughout the equation:             V02=V12+(mM)v12V_0^2 = V_1^2 + \left( \frac{m}{M} \right) v_1^2
    • With two independent equations and two unknowns (V1V_1 for the truck and v1v_1 for the car), and knowing the mass ratio mM=2,00020,000=0.1\frac{m}{M} = \frac{2{,}000}{20{,}000} = 0.1, the post-collision velocities can be solved algebraically.

Compound Problems: The Ballistic Pendulum

  • Physical Setup:

    • A bullet of mass mm travels horizontally at initial velocity v0v_0.
    • The bullet collides with and becomes embedded in a stationary block of mass MM, which is suspended from a rigid, massless rod of length LL.
    • The objective is to determine the minimum initial bullet velocity v0v_0 required to elevate the block-bullet system through an arc of 180∘180^\circ (to the apex of the circle).
  • Stage 1: Inelastic Impact (Momentum Conservation):

    • The collision is perfectly inelastic; mechanical energy is lost to thermal and deformation processes, but linear momentum is conserved immediately before and after impact:         mv0=(m+M)v1m v_0 = (m + M) v_1
    • Solving for intermediate velocity v1v_1 immediately following the impact:         v1=(mm+M)v0v_1 = \left( \frac{m}{m + M} \right) v_0
  • Stage 2: Swing to Apex (Mechanical Energy Conservation):

    • Following the collision, non-conservative forces vanish, and mechanical energy is conserved as the kinetic energy converts into gravitational potential energy.
    • Initial state (Event 1): purely kinetic energy at the bottom (h=0h = 0):         E1=12(m+M)v12E_1 = \frac{1}{2} (m + M) v_1^2
    • Final state (Event 2): potential energy at the top (h=2Lh = 2L for a 180∘180^\circ rotation):         E2=(m+M)g(2L)E_2 = (m + M) g (2L)
    • Because the pendulum is supported by a rigid rod rather than a flexible tether, it does not require a minimum non-zero velocity at the top to prevent collapse; the minimum velocity at the apex can equal zero (v2=0v_2 = 0).
    • Equating the two energy states:         12(m+M)v12=(m+M)g(2L)\frac{1}{2} (m + M) v_1^2 = (m + M) g (2L)
    • Canceling the aggregate mass (m+M)(m + M):         12v12=2gL\frac{1}{2} v_1^2 = 2 g Lv12=4gLv_1^2 = 4 g Lv1=4gLv_1 = \sqrt{4 g L}
  • Determining Minimum Initial Bullet Velocity:

    • Substituting v1v_1 back into the momentum ratio:         v0=(m+Mm)v1=(m+Mm)4gLv_0 = \left( \frac{m + M}{m} \right) v_1 = \left( \frac{m + M}{m} \right) \sqrt{4 g L}
  • Comparison: Rigid Rod vs. Flexible String:

    • If the rigid rod were replaced by a flexible string, the block would fall if string tension dropped to zero before reaching the apex.
    • To maintain a circular trajectory, the centripetal acceleration at the top must satisfy:         v22L≥g  ⟹  v22≥gL\frac{v_2^2}{L} \ge g \implies v_2^2 \ge g L
    • This requires non-zero residual kinetic energy (K2=12(m+M)v22K_2 = \frac{1}{2}(m + M)v_2^2) at the top:         12(m+M)v12=(m+M)g(2L)+12(m+M)gL=52(m+M)gL\frac{1}{2} (m + M) v_1^2 = (m + M) g (2L) + \frac{1}{2} (m + M) g L = \frac{5}{2} (m + M) g L
    • Consequently, a flexible string requires a higher initial velocity (v1=5gLv_1 = \sqrt{5 g L}) than a rigid support rod.

Two-Dimensional Elastic Collisions: Billiards Dynamics

  • Equal-Mass Elastic Scattering:

    • Consider a cue ball (object aa, mass mm) striking a stationary target ball (object bb, mass mm) elastically in two dimensions (vb0=0v_{b0} = 0).
    • Conservation of Energy:12mva02=12mva12+12mvb12\frac{1}{2} m v_{a0}^2 = \frac{1}{2} m v_{a1}^2 + \frac{1}{2} m v_{b1}^2
      • Dividing out the common term 12m\frac{1}{2} m:             va02=va12+vb12v_{a0}^2 = v_{a1}^2 + v_{b1}^2
    • Conservation of Momentum (Vector Form):mva0=mva1+mvb1m \mathbf{v}_{a0} = m \mathbf{v}_{a1} + m \mathbf{v}_{b1}va0=va1+vb1\mathbf{v}_{a0} = \mathbf{v}_{a1} + \mathbf{v}_{b1}
    • Geometric Derivation of the 90∘90^\circ Angle:
      • Computing the scalar product of the momentum vector with itself:             va0⋅va0=(va1+vb1)⋅(va1+vb1)\mathbf{v}_{a0} \cdot \mathbf{v}_{a0} = (\mathbf{v}_{a1} + \mathbf{v}_{b1}) \cdot (\mathbf{v}_{a1} + \mathbf{v}_{b1})va02=va12+vb12+2(va1⋅vb1)v_{a0}^2 = v_{a1}^2 + v_{b1}^2 + 2 (\mathbf{v}_{a1} \cdot \mathbf{v}_{b1})
      • Comparing this with the kinetic energy conservation equation (va02=va12+vb12v_{a0}^2 = v_{a1}^2 + v_{b1}^2) requires:             2(va1⋅vb1)=0  ⟹  va1⋅vb1=02 (\mathbf{v}_{a1} \cdot \mathbf{v}_{b1}) = 0 \implies \mathbf{v}_{a1} \cdot \mathbf{v}_{b1} = 0
      • Because the dot product equals zero, the velocity vectors va1\mathbf{v}_{a1} and vb1\mathbf{v}_{b1} are perpendicular.
      • In any non-head-on elastic collision between identical masses where one is initially at rest, the trajectories of the two bodies emerge at exactly 90∘90^\circ relative to one another.
  • Component Angle Calculation:

    • If the target ball ricochets at an angle of θa=35∘\theta_a = 35^\circ relative to the initial cue line:         θa+∣θb∣=90∘\theta_a + |\theta_b| = 90^\circ∣θb∣=90∘−35∘=55∘|\theta_b| = 90^\circ - 35^\circ = 55^\circ
    • Accounting for orientation relative to the initial axis of motion, the cue ball deflects at an absolute angle of θb=−55∘\theta_b = -55^\circ.
  • Two-Dimensional Component Equations:

    • Along the x-axis (initial trajectory direction):         va0=vb1cos⁡(θb)+va1cos⁡(θa)v_{a0} = v_{b1} \cos(\theta_b) + v_{a1} \cos(\theta_a)
    • Along the y-axis (perpendicular to initial motion):         0=vb1sin⁡(θb)+va1sin⁡(θa)0 = v_{b1} \sin(\theta_b) + v_{a1} \sin(\theta_a)
    • Note: Real-world impact angles depend on the impact parameter (the transverse offset between ball centers at the moment of contact).

Course Logistics and Examination Policies

  • Quiz 3 Guidelines:

    • Content: Covers the energy chapter.
    • Time Allocation: Originally designated for 20 minutes, the time limit is doubled to 40 minutes to alleviate time pressure.
    • Submission Deadline: Available from the conclusion of class until midnight tomorrow.
  • Upcoming Midterm Examination:

    • Date: Scheduled for the Wednesday immediately following break.
    • Practice Examination Material: Posted on Canvas within Module 6 under "information plus review problems."
    • Practice Exam Length: The practice exam contains more material and is approximately one page longer than the official exam.
    • Format Revision: Multiple-choice questions have been replaced with fill-in-the-blank questions to better evaluate student understanding.
    • Answer Key Policy: No answer keys will be published for the practice exam problems; students must verify their work independently.
    • Review Schedule: Review sessions are scheduled for Wednesday prior to break and again immediately upon returning from break.

Questions and Discussion

  • Meaning of Inelastic Collision Notation:

    • Question: What is the physical meaning of the mathematical expression v1=va1=vb1v_1 = v_{a1} = v_{b1}?
    • Response: It indicates that the velocities are equal and balanced. Physically, event 1 represents the state after collision; objects aa and bb stick together and continue moving with a single shared common velocity as a combined aggregate mass.
  • Football Tackle Net Momentum Clarification:

    • Question: In computing the final velocity of the two football players, are the values subtracted and then divided by total mass, and how was a numerator of 30 obtained?
    • Response: Strictly speaking, the equation represents a vector sum. Because the quarterback moves in the negative x-direction, his momentum is −1020 kg m/s-1020\,kg\,m/s. Adding the linebacker's momentum of +1050 kg m/s+1050\,kg\,m/s yields a net numerator of +30 kg m/s+30\,kg\,m/s, which is then divided by the total mass of 190 kg190\,kg.
  • Ballistic Pendulum Energy State:

    • Question: What form of energy exists immediately after the bullet becomes lodged inside the block at event 1?
    • Response: Kinetic energy. The bullet-block system possesses kinetic energy immediately after impact, which is subsequently converted entirely into gravitational potential energy at the top of the swing.
  • Quiz 3 Due Date Clarification:

    • Question (Chloe): Canvas currently displays that Quiz 3 is due tonight. Is the actual due date tonight or tomorrow?
    • Response: The setting will be updated directly on Canvas; the quiz is officially due tomorrow at midnight.
  • Practice Exam Origin and Answer Key:

    • Question: Were the questions on the practice exam written specifically by the instructor, and will an answer key be provided to check work?
    • Response: Yes, the questions were authored by the instructor. There will not be an answer key provided for the practice exam.
  • Exam Question Format:

    • Question: Will the multiple-choice questions on the upcoming exam be converted into fill-in-the-blank questions?
    • Response: Yes. The multiple-choice format did not accurately showcase student mastery, so the upcoming exam will utilize fill-in-the-blank questions alongside guided problems.