Multivariable Calculus: Triple Integrals and Coordinate Transformations
Foundations of Triple Integrals in Rectangular Coordinates
Definition of the Triple Integral over a Closed and Bounded Solid Region:
Let be a real-valued function defined over a closed, bounded region in three-dimensional Euclidean space .
The region is partitioned into small rectangular sub-boxes (cells) using planes parallel to the coordinate planes.
For the -th sub-box, let the edge lengths along the coordinate axes be , , and .
The volume of the -th sub-box is given by:
In each sub-box, an arbitrary sample point is selected to form the Riemann sum:
The triple integral of over the solid region is defined as the limit of this Riemann sum as the number of sub-boxes and the dimensions of all sub-boxes approach zero: provided this limit exists.

Fundamental Physical and Geometric Interpretations:
Volume of a Solid Region: If for all , the triple integral evaluates the volume of :
Average Value of a Function: The average value of an integrable function over the solid region is:
Total Mass of a Solid Object: If represents the mass density (mass per unit volume) of an object occupying region , the total mass is:
Reference Equations for Standard Quadric Surfaces:
Ellipsoid:
Elliptic Paraboloid:
Elliptic Cone:
Hyperboloid of One Sheet:
Hyperboloid of Two Sheets:
Systematic Procedure for Setting Limits in Rectangular Coordinates
Four-Step Algorithm for Iterated Integrals in the Order :
Step 1: Sketch and Vertical Projection:
Sketch the 3D solid region and determine its vertical projection (shadow) onto the -plane.
Identify and label the lower boundary surface and the upper boundary surface that enclose .
Identify the bounding curves of the planar shadow .

Step 2: Determine the -Limits of Integration:
Pass a vertical line parallel to the -axis through a typical interior point in the shadow region .
As increases, identify the entering surface value and the exiting surface value .
The integral reduces to an outer double integral over :

Step 3: Determine the -Limits of Integration:
In the planar projection , draw a line through parallel to the -axis in the direction of increasing .
Mark the curve where enters , denoted , and where leaves , denoted .
Step 4: Determine the -Limits of Integration:
Identify the minimum and maximum extremes of across the entire region , say and .
Combine the limits to produce the full iterated integral:

Detailed Worked Problems in Rectangular Coordinates
Evaluation of a Polynomial Triple Integral:
Problem Statement: Evaluate , where is defined by the inequalities , , and .
Setup and Integration Steps:
Evaluating the inner integral with respect to :
Evaluating the middle integral with respect to :
Evaluating the outer integral with respect to :
Volume of a Cylindrical Wedge (Q. 26, P-927):
Problem Statement: Find the volume of the wedge cut from the cylinder with by the planes and .

Domain Analysis:
Because and , the condition requires .
The orthogonal projection of the solid onto the -plane is the lower semicircular disk:
Iterated Integral Formulation:
Integrating over where and :
Alternative Computation Using Symmetry:
Volume Bounded by Opposing Paraboloids (Q. 5, P-926):
Problem Statement: Find the volume of the region bounded above by the paraboloid and below by the paraboloid .

Boundary and Projection Analysis:
For each vertical filament, ranges from the lower surface to the upper surface .
Equating the two boundary equations identifies the curve of intersection:
The shadow projection in the -plane is the disk of radius centered at the origin:
Volume Formulation:
Evaluating via Cartesian coordinates:
First-Octant Region Bounded by Multiple Planes (Q. 24, P-927):
Problem Statement: Find the volume of the region in the first octant bounded by the coordinate planes (, , ) and the planes and .
Projection onto the -Plane (Divided Region Approach):
The two planes intersect where and , which gives:
The line splits the projected region into two triangular sub-domains, requiring two separate triple integrals:
Projection onto the -Plane (Single Integral Formulation):
Projecting onto the -plane eliminates domain splitting.
In the -plane, the region is bounded by the axes , , and the line .
For each , the variable ranges from to :
Volume Under a Parabolic Cylinder in the First Octant (Q. 30, P-927):
Problem Statement: Find the volume of the region in the first octant bounded by the coordinate planes and the surface .
Iterated Integration:
For , the trace in the -plane is . For , .
Volume of a Cylinder Sliced by an Inclined Plane (Q. 32, P-927):
Problem Statement: Find the volume of the region cut from the circular cylinder by the planes and .
Integration Setup:
Upper surface: , lower surface: .
Projection onto the -plane is the disk .
The second integral vanishes because the integrand is odd over a symmetric interval.
The first integral corresponds to the area of a semicircle of radius multiplied by :
Average Value over a Rectangular Box (Q. 38, P-928):
Problem Statement: Find the average value of over the rectangular box .
Evaluation Steps:
If integrating over the proper bounds yields (such as when taking the volume factor into account directly):
Volume Bounded by an Elliptic Cylinder and a Plane in the First Octant:
Problem Statement: Find the volume in the first octant bounded by the coordinate planes, the plane , and the cylinder .
Setup in the Order :
In the first octant, ranges from to .
The cylinder gives , with varying from to .
Evaluating via the trigonometric substitution , :
Triple Integrals in Cylindrical Coordinates
Coordinate Definitions and Coordinate Surfaces:
Cylindrical coordinates combine polar coordinates in the -plane with the Cartesian vertical distance : where , , and .
A specific point is located at the intersection of three mutually perpendicular surfaces:
: A right circular cylinder of radius centered on the -axis.
: A vertical half-plane containing the -axis (for ).
: A horizontal plane parallel to the -plane.

Differential Volume Element and Jacobian:
The differential volume element in cylindrical coordinates is:
The general triple integral transforms as:
Worked Problems in Cylindrical Coordinates:
Volume Bounded by Opposing Paraboloids Revisited:
Solid bounded by and .
Projection is the circular disk , :
Volume Under Sphere Above Plane :
Bounded above by and below by .
Intersection: .
Projection ; -limits: .
Volume Inside Sphere Between Planes and :
The region is partitioned into two sub-volumes:
(a) A central circular cylinder of radius and height :
(b) An outer ring inside the sphere and outside the cylinder, with projection , , and :
Total Volume:
Verification: The upper hemisphere of radius has volume:
Volume Bounded by Paraboloids and a Cylinder (Q. 76, P-949):
Bounded below by , above by , and laterally by :
Cylinder Cut by an Inclined Plane via Cylindrical Coordinates (Q. 80, P-949):
Cut from by and ():
Solid Cylinder Cut by a Sphere (Q. 83, P-949):
Solid cylinder intersected with sphere :
Volume Under a Paraboloid Outside a Cylinder (Q. 82, P-949):
Bounded above by , below by , and outside the cylinder :
Triple Integrals in Spherical Coordinates
Coordinate System Definitions and Boundaries:
A point is represented by the ordered triple :
: The Euclidean distance from the origin to , with .
: The polar (colatitudinal) angle measured from the positive -axis to the line segment , with .
: The azimuthal angle measured from the positive -axis to the orthogonal projection of onto the -plane, with .

Coordinate Surfaces:
: A sphere of radius centered at the origin.
: A circular cone with vertex at the origin and axis along the -axis.
: A vertical half-plane containing the -axis.
Coordinate Transformations:
Differential Volume Element:
The volume element corresponds to a spherical wedge of radial thickness , latitudinal arc , and longitudinal arc :

General Formulation:
Worked Problems in Spherical Coordinates:
Integral of Radial Distance over the Unit Sphere:
Solid sphere enclosed by :
Volume Inside Sphere and Above Cone:
Bounded above by sphere () and below by cone ():
Volume Bounded Below by Shifted Sphere and Above by Cone (Q. 59, P-948):
Bounded below by (sphere centered at of radius ) and above by cone :
First-Octant Spherical Wedge (Q. 72, P-948):
Cut from ball by half-planes and in the first octant ():
Volume of Spherical Cap Cut by Plane (Q. 73, P-949):
For ball cut by ().
The intersection occurs where .
For ball of radius cut by plane :
Intersection: .
Region Inside Sphere and Outside Cylinder (Q. 73, P-949):
Inside sphere and outside cylinder ().
Intersections at and correspond to and :
Cone Frustum Between Parallel Planes:
Solid enclosed by between and :
Substitutions and Change of Variables in Multiple Integrals
Theoretical Framework for Double Integrals:
Suppose a transformation equations and map a region in the -plane one-to-one (bijectively) onto a region in the -plane.
The region is called the image of , and is the pre-image of .
The Jacobian determinant of the transformation, denoted or , is:
Substitution Theorem for Double Integrals: If is continuous over , and , have continuous first partial derivatives inside , then:
The absolute value acts as the local area magnifying factor. For a valid one-to-one mapping, .
Jacobian Derivation for Polar Coordinates:
Transformation equations: , .
Thus, .
Worked Double Integral Substitution Problems:
Algebraic Substitution Problem:
Integral: .
Substitution: Let and .
Solving for and :
Computing the Jacobian:
Image of a Triangular Region (Q. 3, P-958):
Problem Statement: Find the image in the -plane of the triangular region in the -plane bounded by the -axis (), the -axis (), and the line under the transformation , .
Inverse Transformations:
Boundary Transformations:
-axis ():
-axis ():
Line :

Parallelogram Integral Evaluation (Q. 7, P-958):
Problem Statement: Evaluate over the region bounded by the lines , , , and .
Algebraic Factoring:
Transformation: Set and .
Line
Line
Line
Line


Jacobian Calculation:
Inverse equations: , .
Integration:
Exponential Triangular Region Integral (Q. 13, P-958):
Problem Statement: Evaluate using and .
Inverse Transformations:
Boundary Transformations:
Line :
Line :
Line :

Jacobian Calculation:
Integration:
Substitutions in Triple Integrals
Theoretical Framework for Three Dimensions:
Let , , and define a one-to-one mapping from region in -space to region in -space.
The Jacobian determinant is defined as:
Substitution Theorem for Triple Integrals: If is continuous over , and the partial derivatives are continuous in the interior of :
Jacobian Derivation for Standard Space Coordinates:
Cylindrical Coordinates Transformation:
Spherical Coordinates Transformation:
Expanding along the third row:
Worked Problems for Triple Substitutions:
Volume of an Ellipsoid (Q. 18, P-959):
Problem Statement: Compute the volume enclosed by the ellipsoid:
Substitution: Define scaled coordinates , , and .
The region transforms into the solid unit sphere in -space:
The Jacobian determinant evaluates to:
Transforming the volume integral:
Converting the unit sphere in -space into spherical coordinates (, , ):
Integral of over a Solid Ellipsoid (Q. 19, P-959):
Problem Statement: Evaluate , where is the solid ellipsoid .
Coordinate Substitution: Set , , and , giving .
Spherical Coordinates in -Space:
Combining into the full integral:
Integrating the radial variable :
By octant symmetry ( symmetric octants):
Multiplying the integrated factors: