Velocity-Time Graphs and Uniform vs. Non-Uniform Motion
Kinematics Foundations and Position-Time Scenarios
Motion Scenario 1: Bear Displacement Profile
- Initial position starts at relative to an established reference point.
- Moves away slowly at a constant velocity for an elapsed time of .
- Halts and remains completely stationary for a duration of .
- Reverses direction (backs up) at half of the original travel speed for a time period of .
- Comes to a complete, final stop.
Motion Scenario 2: Student Commute Profile
- Segment (a): Walks east toward school with a constant velocity.
- Segment (b): Halts at the school facility, situated from the home origin.
- Segment (c): Mounts a bicycle and travels back home at a constant cycling velocity.
Motion Scenario 3: Two-Vehicle Traffic Intersection Kinematics
- Vehicle A travels at located from an active traffic signal.
- Vehicle B travels at in the opposite direction toward the same signal.
- Critical kinematic evaluations: Determining the exact temporal point at which the vehicles pass one another, and determining when each independent vehicle crosses the traffic light position under the condition that the signal green light remains on continuously.
Digital Extension Resources:
- Conceptual checks for uniform motion are provided via eTest web access at
www.pearsoned.ca/school/physicssource.
- Conceptual checks for uniform motion are provided via eTest web access at
Velocity-Time Graphs: Uniform Motion Analysis
Applications and Real-Time Velocity Monitoring:
- Aircraft passenger cabin video screens offer real-time telemetry displaying flight speed and spatial navigation tracks.
- Uniform speed flight interval snapshots indicate that an aircraft flying at steady speed traverses identical distances in each consecutive hour ( covered at , , , , , and ).
Graphical Interpretation Principles:
- The geometric geometry and slope of a velocity-time graph indicate whether a body is resting, maintaining constant speed, speeding up, or slowing down.
- A horizontal linear profile demonstrates invariant velocity across the recorded time duration.
Case Study: Commercial Airplane Cruising Parameters:
- Cruising altitude maintained: .
- Constant cruising velocity: .
- Recorded flight duration: .
- Velocity-time data values:
- At , .
- At , .
- At , .
- At , .
- At , .
- At , .

Mathematical Derivation and Slope of Velocity-Time Graphs
Slope Determination Formulation:
- Defining east as the positive vector direction ().
- Fundamental slope equation:
- Substitution of flight coordinate values (, ):
Physical Meaning and Acceleration:
- The velocity-time slope of the flight is precisely because the velocity does not vary ().
- Slope on a velocity-time graph equals the acceleration of the object.
- Zero slope denotes an acceleration value of zero ().
Dimensional Units of Acceleration:
- General acceleration dimensions always equate to distance divided by time squared ().
- Derived units include .
- Standard international SI unit for acceleration is metres per second per second, abbreviated as (spoken as "metres per second squared").
Core Concept Inquiries:
- Concept Check (a): The slope of a position-time graph represents the velocity of the object.
- Concept Check (b): The slope of a velocity-time graph represents the acceleration of the object.
- Technical extension: eTech link at
www.pearsoned.ca/school/physicssourceoutlines techniques for calculating object velocity from position-time curve profiles.
Non-Uniform Motion and the Physics of Acceleration
Uniform vs. Non-Uniform Motion Mechanics:
- Uniform motion: Constant velocity motion characterized by unchanging speed and fixed travel direction.
- Non-uniform motion: Motion where velocity shifts in magnitude (speed), direction, or both.
- Real-world operational reality: Vehicles attempting constant motion—even cars engaged on cruise control—experience physical fluctuations in velocity and direction.
Acceleration Fundamentals:
- Acceleration (): A vector quantity representing the rate of change in velocity (magnitude or direction) per unit time.
- Occurs whenever an object accelerates from rest, increases speed, reduces speed, or alters course.
Case Study: Drag Racer Acceleration from Rest:
- A drag racer starts from rest () and transitions over time to a non-zero velocity.
- Position-time milestones for an accelerating automobile (scale ):
- At , position coordinate is .
- At , position coordinate is ( during the first second).
- At , position coordinate is ( during the second second).
- At , position coordinate is ( during the third second).
- Because displacements during equal consecutive time increments expand progressively, the object is undergoing accelerated, non-uniform motion.
Ticker-Tape Kinematic Analysis:
- Ticker-tape records represent motion via dot spacing produced at uniform time intervals.
- Accelerated motion produces progressively widening or narrowing distances between consecutive dots, distinguishing it from uniform motion which features constant dot intervals.

QuickLab 1-4: Match a Graph Procedure and Analysis
Core Problem:
- Identifying what type of physical motion is described by distinct graphical profiles.
Required Laboratory Materials:
- Reference activity sheet LM 1-1.
- Measuring ruler.
- Ultrasonic motion sensor.
- Masking tape.
Step-by-Step Procedure:
- Step 1: Study different position-time graphs on LM 1-1 with a partner to determine the specific class of motion depicted by each profile.
- Step 2: Configure the motion sensor hardware to record and graph real-time position versus time coordinates.
- Step 3: Affix a strip of masking tape to label a baseline starting line approximately in front of the sensor. Walk away from the sensor at rates calibrated to reproduce the graph shown on LM 1-1.
- Step 4: Swap partner roles and execute Steps 1 through 3 again.
- Step 5: Print out all captured graphs from the experiment and construct a dedicated table of position and time coordinates for each graph.
Analytical Questions and Structural Conclusions:
- Question 1: Describe the physical movement executed when a horizontal line appears on a position-time graph (indicates zero motion; the subject is at rest at a constant distance from the sensor).
- Question 2: Define the relationship between the form of motion and change in position (uniform motion creates steady linear changes in position; non-uniform accelerated motion produces non-linear, parabolic changes in position; stationary states create zero positional change).
- Question 3: Formulate two distinct classification systems to categorize motion from the four graphs (e.g., classification by direction of motion vs. classification by state of acceleration/uniformity).
- Question 4: Outline the graphical curve produced by walking away from the sensor and then returning back toward it (produces a positive slope moving away, followed by an inflection point and a negative slope approaching the sensor).
- Question 5: Characterize the graph generated by moving away from the initial start line, moving back toward it, and continuing past it (yields a positive slope, followed by a negative slope that crosses through and extends below the original baseline position).
- Digital Extension: Probeware activities can be completed through eLAB resources at
www.pearsoned.ca/school/physicssource.