Forces & Motion: Basic Quantities


  • Definition of a Force:

    • A force is defined as a push or a pull.

    • Forces are measured in units called Newtons (N\text{N}).

  • Observable Effects of Forces:

    • An object can speed up.

    • An object can slow down.

    • An object can start moving from rest.

    • An object can stop moving.

    • An object can change its direction of motion.

    • An object can change its shape.

Distance, Displacement, Speed, and Velocity

  • Distance versus Displacement:

    • Distance: The total path length covered by an object during its motion, regardless of direction. Distance is a scalar quantity measured in metres (m\text{m}).

    • Displacement: The distance measured in a specified straight-line direction from an initial position to a final position. Displacement is a vector quantity measured in metres (m\text{m}).

    • Illustrative Scenario: Consider a journey between Anne's house and Barbara's house along a winding road.


Map of road versus displacement between Anne's house and Barbara's house
*   When walking along the curved road, the actual distance travelled is 80 m80\,\text{m}.
*   The direct straight-line route between the two houses ("as the crow flies") is direct and significantly less than 80 m80\,\text{m} (e.g., 50 m50\,\text{m}).
*   This direct straight-line distance in a specified direction represents the displacement of one house relative to the other.
  • Average Speed:

    • Speed measures the rate at which distance is covered over time.

    • Primary Formula:         Average speed=total distancetotal time\text{Average speed} = \frac{\text{total distance}}{\text{total time}}

    • Worked Calculation: If Anne walks the 80 m80\,\text{m} road distance in 40 s40\,\text{s}:         Average speed=80 m40 s=2 m/s\text{Average speed} = \frac{80\,\text{m}}{40\,\text{s}} = 2\,\text{m/s}

    • Alternative Formula (Uniform Acceleration): When an object accelerates or decelerates uniformly between an initial speed (uu) and a final speed (vv), the average speed is given by:         Average speed=u+v2\text{Average speed} = \frac{u + v}{2}

      • uu: initial speed (starting speed).

      • vv: final speed (finishing speed).

      • Alphabetical Rule of Thumb: The letter uu precedes vv in the alphabet, denoting starting before finishing.

  • Average Velocity:

    • Velocity is defined as speed in a certain specified direction.

    • Formula:         Average velocity=total displacementtotal time\text{Average velocity} = \frac{\text{total displacement}}{\text{total time}}

    • Worked Calculation: If a bird flies in a straight line from Anne's roof to Barbara's roof (a displacement of 50 m50\,\text{m}) in a time of 10 s10\,\text{s}:         Average velocity=50 m10 s=5 m/s\text{Average velocity} = \frac{50\,\text{m}}{10\,\text{s}} = 5\,\text{m/s}

    • Zero Displacement Scenario: If a bird flies from Anne's roof to another point and subsequently returns to Anne's roof, its overall average velocity is 0 m/s0\,\text{m/s}. This occurs because the initial and final positions are identical, making the total displacement equal to zero.

    • Instantaneous Velocity Consideration: While the bird's average velocity across the full 50 m50\,\text{m} flight is 5 m/s5\,\text{m/s}, it cannot be assumed that its velocity had this precise value at an intermediate point (such as after 20 m20\,\text{m}). Velocity can vary at different instants along a journey.

  • Distinction Between Speed and Velocity (Directional Dependence):

    • Consider three cars travelling at the same numerical rate:

      • Car A moves to the left at 10 m/s10\,\text{m/s}.

      • Car B moves to the right at 10 m/s10\,\text{m/s}.

      • Car C moves to the right at 10 m/s10\,\text{m/s}.

    • All three cars (A, B, and C) travel at the exact same speed (10 m/s10\,\text{m/s}).

    • Only Cars B and C travel at the same velocity, because their direction of motion is identical.

    • Expressing velocity directionally:

      • Car A has a velocity of −10 m/s-10\,\text{m/s}.

      • Car B has a velocity of 10 m/s10\,\text{m/s}.

      • Car C has a velocity of 10 m/s10\,\text{m/s}.

  • Straight-Line Approximations:

    • When dealing strictly with objects travelling in a single, unchanging straight line:

      • Distance and displacement are equivalent in magnitude.

      • Speed and velocity are equivalent in magnitude.

  • Scalars and Vectors:

    • Scalar: A physical quantity that possesses magnitude (size) only.

    • Vector: A physical quantity that possesses both magnitude (size) and direction.

  • Summary of Units and Classifications:

    • Distance: measured in metres (m\text{m}); scalar quantity.

    • Displacement: measured in metres (m\text{m}); vector quantity.

    • Speed: measured in metres per second (m/s\text{m/s}); scalar quantity.

    • Velocity: measured in metres per second (m/s\text{m/s}); vector quantity.

Practical Investigations of Speed

  • Experiment: Measuring the Average Speed of an Object on a Slope:

    • Apparatus: Trolley or ball bearing, inclined ramp, metre rule, stopwatch.

    • Methodology:

      • Measure the total distance from the top release mark to the bottom of the slope using a metre rule and record the measurement.

      • Position the ball bearing at the top of the incline.

      • Release the ball and simultaneously start the stopwatch.

      • Stop the stopwatch precisely when the ball arrives at the bottom of the slope.

      • Repeat the timing procedure at least 3 times to calculate an average time and improve reliability.

      • Determine the average speed using:             speed=distancetime\text{speed} = \frac{\text{distance}}{\text{time}}

    • Sample Experimental Data:

      • Length of slope: 1.21 m1.21\,\text{m}

      • Recorded times: t1=1.22 st_1 = 1.22\,\text{s}, t2=1.19 st_2 = 1.19\,\text{s}, t3=1.25 st_3 = 1.25\,\text{s}

      • Average time: 1.22 s1.22\,\text{s}

      • Calculated average speed:             Average speed=1.21 m1.22 s=0.99 m/s\text{Average speed} = \frac{1.21\,\text{m}}{1.22\,\text{s}} = 0.99\,\text{m/s}

    • Calculating Final Velocity from Average Speed:

      • Assuming the ball starts from rest (u=0 m/su = 0\,\text{m/s}):             Average speed=u+v2\text{Average speed} = \frac{u + v}{2}             0.99=0+v20.99 = \frac{0 + v}{2}             v=0.99×2=1.98 m/sv = 0.99 \times 2 = 1.98\,\text{m/s}

  • Prescribed Practical 1: Investigating How Slope Height Affects Average Speed:

    • Theoretical Hypothesis/Prediction: A greater slope height produces a steeper incline, which results in a greater component of gravitational force accelerating the ball, thereby producing a higher average speed down the ramp.

    • Variables:

      • Independent Variable: Height of the slope (adjusted to at least 5 distinct values to allow graphical analysis).

      • Dependent Variable: Average speed of the ball bearing.

      • Controlled Variables: The specific ball bearing used, the release position, the surface material of the slope, and the overall length of the slope (121.5 cm121.5\,\text{cm}).

    • Step-by-Step Procedure:

      • Prepare a designated results table with appropriate column headings and metric units.

      • Measure the total length of the slope (121.5 cm121.5\,\text{cm}) using a metre ruler.

      • Set the vertical height of the slope release point to 20 cm20\,\text{cm} from the bench surface.

      • Release the ball bearing from rest and measure the descent time to the bottom using a stopwatch.

      • Repeat the measurement at the same height to ensure reliability.

      • Incrementally alter the slope height (e.g., testing heights such as 24.0 cm24.0\,\text{cm}, 32.5 cm32.5\,\text{cm}, 41.5 cm41.5\,\text{cm}, 49.5 cm49.5\,\text{cm}, 58.0 cm58.0\,\text{cm}, and 66.0 cm66.0\,\text{cm}).

      • Record all repeat times, computing the average transit time and average speed for each height setting.

    • Recorded Empirical Results (Slope Length = 121.5 cm121.5\,\text{cm}):

      • Height 24.0 cm24.0\,\text{cm}: t1=1.40 st_1 = 1.40\,\text{s}, t2=1.28 st_2 = 1.28\,\text{s}, Average time=1.34 s\text{Average time} = 1.34\,\text{s}, Average speed=90.6 cm/s\text{Average speed} = 90.6\,\text{cm/s}

      • Height 32.5 cm32.5\,\text{cm}: t1=1.25 st_1 = 1.25\,\text{s}, t2=1.28 st_2 = 1.28\,\text{s}, Average time=1.27 s\text{Average time} = 1.27\,\text{s}, Average speed=95.6 cm/s\text{Average speed} = 95.6\,\text{cm/s}

      • Height 41.5 cm41.5\,\text{cm}: t1=1.06 st_1 = 1.06\,\text{s}, t2=1.03 st_2 = 1.03\,\text{s}, Average time=1.05 s\text{Average time} = 1.05\,\text{s}, Average speed=115.7 cm/s\text{Average speed} = 115.7\,\text{cm/s}

      • Height 49.5 cm49.5\,\text{cm}: t1=1.00 st_1 = 1.00\,\text{s}, t2=0.91 st_2 = 0.91\,\text{s}, Average time=0.96 s\text{Average time} = 0.96\,\text{s}, Average speed=126.5 cm/s\text{Average speed} = 126.5\,\text{cm/s}

      • Height 58.0 cm58.0\,\text{cm}: t1=0.87 st_1 = 0.87\,\text{s}, t2=0.91 st_2 = 0.91\,\text{s}, Average time=0.89 s\text{Average time} = 0.89\,\text{s}, Average speed=136.5 cm/s\text{Average speed} = 136.5\,\text{cm/s}

      • Height 66.0 cm66.0\,\text{cm}: t1=0.81 st_1 = 0.81\,\text{s}, t2=0.88 st_2 = 0.88\,\text{s}, Average time=0.85 s\text{Average time} = 0.85\,\text{s}, Average speed=142.9 cm/s\text{Average speed} = 142.9\,\text{cm/s}

    • Experimental Conclusion: As the height of the incline increases, the average speed of the ball increases. The plotted graph of average speed versus height forms a curve rather than a straight line passing through the origin, demonstrating that average speed is not directly proportional to the slope height.

Acceleration and Deceleration

  • Definition and Conceptual Meaning:

    • Acceleration describes situations where velocity changes over time.

    • Acceleration is formally defined as the rate of change of velocity (or speed in a straight line).

    • Meaning of the Unit (m/s2\text{m/s}^2): If a body experiences an acceleration of 5 m/s25\,\text{m/s}^2, its speed increases by 5 m/s5\,\text{m/s} during each successive second of travel.

      • At t=0 st = 0\,\text{s}, v=0 m/sv = 0\,\text{m/s}.

      • At t=1 st = 1\,\text{s}, v=5 m/sv = 5\,\text{m/s}.

      • At t=2 st = 2\,\text{s}, v=10 m/sv = 10\,\text{m/s}.

      • At t=3 st = 3\,\text{s}, v=15 m/sv = 15\,\text{m/s}.

  • Mathematical Formula:     Acceleration=change in velocitytime taken\text{Acceleration} = \frac{\text{change in velocity}}{\text{time taken}}     a=v−uta = \frac{v - u}{t}

    • aa: acceleration (m/s2\text{m/s}^2

    • vv: final velocity (m/s\text{m/s}

    • uu: initial velocity (m/s\text{m/s}

    • tt: time taken for the velocity change (s\text{s}

  • Vehicle Acceleration Comparison (0 to 25 m/s25\,\text{m/s}, approximately 60 mph60\,\text{mph}):

    • Mini Metro: Changes velocity by 25 m/s25\,\text{m/s} in 25 s25\,\text{s}.         a=25 m/s25 s=1 m/s2a = \frac{25\,\text{m/s}}{25\,\text{s}} = 1\,\text{m/s}^2         (Performance Rating: 1 star - lowest acceleration)

    • Ford Escort: Changes velocity by 25 m/s25\,\text{m/s} in 10 s10\,\text{s}.         a=25 m/s10 s=2.5 m/s2a = \frac{25\,\text{m/s}}{10\,\text{s}} = 2.5\,\text{m/s}^2         (Performance Rating: 2 stars - intermediate acceleration)

    • Porsche Turbo: Changes velocity by 25 m/s25\,\text{m/s} in 5 s5\,\text{s}.         a=25 m/s5 s=5 m/s2a = \frac{25\,\text{m/s}}{5\,\text{s}} = 5\,\text{m/s}^2         (Performance Rating: 3 stars - highest acceleration)

  • Sign Conventions and Deceleration:

    • A positive acceleration value (a>0a > 0) indicates that the body is speeding up.

    • A negative acceleration value (a<0a < 0) indicates that the body is slowing down, termed deceleration or retardation.

    • Worked Example 1 (Positive Acceleration): A cyclist increases velocity from 2 m/s2\,\text{m/s} to 10 m/s10\,\text{m/s} in 4 s4\,\text{s}.         u=2 m/su = 2\,\text{m/s}         v=10 m/sv = 10\,\text{m/s}         t=4 st = 4\,\text{s}         a=v−ut=10−24=84=2 m/s2a = \frac{v - u}{t} = \frac{10 - 2}{4} = \frac{8}{4} = 2\,\text{m/s}^2

    • Worked Example 2 (Deceleration): A car travelling at 12 m/s12\,\text{m/s} brakes to a halt in 4 s4\,\text{s}.         u=12 m/su = 12\,\text{m/s}         v=0 m/sv = 0\,\text{m/s}         t=4 st = 4\,\text{s}         a=v−ut=0−124=−124=−3 m/s2a = \frac{v - u}{t} = \frac{0 - 12}{4} = \frac{-12}{4} = -3\,\text{m/s}^2         The acceleration is −3 m/s2-3\,\text{m/s}^2, representing a deceleration of 3 m/s23\,\text{m/s}^2.

Graphical Analysis of Motion

  • General Graph Plotting Conventions:

    • When plotting experimental relationships, the quantity stated first is assigned to the y-axis (vertical axis), and the quantity stated second is placed on the x-axis (horizontal axis).

    • For a displacement against time graph (s/ts/t), displacement (ss) lies on the y-axis, and time (tt) lies on the x-axis.

    • For a velocity against time graph (v/tv/t), velocity (vv) lies on the y-axis, and time (tt) lies on the x-axis.

  • Comparative Case Study 1: Constant Velocity (Ann):

    • Kinematic Data:

      • Time (tt in s\text{s}): 0, 1, 2, 3, 4, 5

      • Displacement (ss in m\text{m}): 0, 4, 8, 12, 16, 20

      • Velocity (vv in m/s\text{m/s}): 4, 4, 4, 4, 4, 4

    • Motion Description: Ann moves at a constant velocity of 4 m/s4\,\text{m/s} for 5 s5\,\text{s}, covering a total displacement of 20 m20\,\text{m}.

    • Displacement-Time (s/ts/t) Graph: Forms a straight line passing through the origin.         Gradient=riserun=20−05−0=4 m/s\text{Gradient} = \frac{\text{rise}}{\text{run}} = \frac{20 - 0}{5 - 0} = 4\,\text{m/s}         The gradient of the s/ts/t graph equals the velocity (4 m/s4\,\text{m/s}).

    • Velocity-Time (v/tv/t) Graph: Forms a flat horizontal line at v=4 m/sv = 4\,\text{m/s}.         Area beneath graph=base×height=5 s×4 m/s=20 m\text{Area beneath graph} = \text{base} \times \text{height} = 5\,\text{s} \times 4\,\text{m/s} = 20\,\text{m}         The area between the v/tv/t graph and the time axis equals the total displacement (20 m20\,\text{m}).

  • Comparative Case Study 2: Constant Acceleration from Rest (Barbara):

    • Kinematic Data:

      • Time (tt in s\text{s}): 0, 1, 2, 3, 4, 5

      • Displacement (ss in m\text{m}): 0, 0.5, 2, 4.5, 8, 12.5

      • Velocity (vv in m/s\text{m/s}): 0, 1, 2, 3, 4, 5

    • Motion Description: Barbara accelerates uniformly from rest for 5 s5\,\text{s}, covering a total displacement of 12.5 m12.5\,\text{m}.

    • Acceleration Calculation:         a=v−ut=5−05=1 m/s2a = \frac{v - u}{t} = \frac{5 - 0}{5} = 1\,\text{m/s}^2

    • Displacement-Time (s/ts/t) Graph: Forms an upward-sloping parabolic curve with an increasing gradient.

    • Velocity-Time (v/tv/t) Graph: Forms a straight, inclined line starting at (0,0)(0, 0) and ending at (5,5)(5, 5).         Gradient=riserun=5−05−0=1 m/s2\text{Gradient} = \frac{\text{rise}}{\text{run}} = \frac{5 - 0}{5 - 0} = 1\,\text{m/s}^2         The gradient of the v/tv/t graph equals the acceleration (1 m/s21\,\text{m/s}^2).         Area beneath graph=12×base×height=12×5 s×5 m/s=12.5 m\text{Area beneath graph} = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} \times 5\,\text{s} \times 5\,\text{m/s} = 12.5\,\text{m}         The area between the v/tv/t line and the time axis equals the total displacement (12.5 m12.5\,\text{m}).

  • Comparative Case Study 3: Constant Deceleration to Rest (Claire):

    • Kinematic Data:

      • Time (tt in s\text{s}): 0, 1, 2, 3, 4, 5

      • Displacement (ss in m\text{m}): 0, 4.5, 8, 10.5, 12, 12.5

      • Velocity (vv in m/s\text{m/s}): 5, 4, 3, 2, 1, 0

    • Motion Description: Claire undergoes uniform deceleration from 5 m/s5\,\text{m/s} to 0 m/s0\,\text{m/s} over 5 s5\,\text{s}, covering a total displacement of 12.5 m12.5\,\text{m}.

    • Acceleration Calculation:         a=v−ut=0−55=−1 m/s2a = \frac{v - u}{t} = \frac{0 - 5}{5} = -1\,\text{m/s}^2

    • Displacement-Time (s/ts/t) Graph: Forms a curve whose slope gradually flattens to a horizontal tangent at t=5 st = 5\,\text{s}.

    • Velocity-Time (v/tv/t) Graph: Forms a downward-sloping straight line connecting (0,5)(0, 5) to (5,0)(5, 0).         Gradient=riserun=0−55−0=−1 m/s2\text{Gradient} = \frac{\text{rise}}{\text{run}} = \frac{0 - 5}{5 - 0} = -1\,\text{m/s}^2         The gradient equals the acceleration (−1 m/s2-1\,\text{m/s}^2, or deceleration of 1 m/s21\,\text{m/s}^2).         Area beneath graph=12×base×height=12×5 s×5 m/s=12.5 m\text{Area beneath graph} = \frac{1}{2} \times \text{base} \times \text{height} = \frac{1}{2} \times 5\,\text{s} \times 5\,\text{m/s} = 12.5\,\text{m}         The area under the graph equals the total displacement (12.5 m12.5\,\text{m}).

  • Fundamental Motion Graph Principles:

    • In any displacement-time graph, the gradient is equal to the velocity.

    • In any velocity-time graph, the gradient is equal to the acceleration.

    • In any velocity-time graph, the area between the plotted line and the time axis is equal to the displacement (distance travelled).

  • Worked Multi-Stage Graph Problem:

    • Displacement-Time Dataset for a Non-Uniform Journey:

      • Distance (m\text{m}): 0, 1, 2, 3, 4, 4, 4, 6, 10, 14, 18, 22, 26

      • Time (s\text{s}): 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24

    • Full Journey Average Speed:         Average speed=total distancetotal time=26 m24 s=1.08 m/s\text{Average speed} = \frac{\text{total distance}}{\text{total time}} = \frac{26\,\text{m}}{24\,\text{s}} = 1.08\,\text{m/s}

    • Fastest Interval: The body travels fastest between 14 s14\,\text{s} and 24 s24\,\text{s}, where the gradient of the distance-time graph is at its steepest (Δs=20 m\Delta s = 20\,\text{m} over Δt=10 s\Delta t = 10\,\text{s}, giving a speed of 2.0 m/s2.0\,\text{m/s}).

    • Stationary Interval: Between 8 s8\,\text{s} and 12 s12\,\text{s}, the distance remains fixed at 4 m4\,\text{m}. The gradient is zero, showing the object is stationary (not moving).

    • Segment-by-Segment Analysis on a Standard s/ts/t Graph:

      • Section OA (t=0t = 0 to 2 s2\,\text{s}, s=0s = 0 to 4 m4\,\text{m}):             Velocity=gradient=4−02−0=2 m/s\text{Velocity} = \text{gradient} = \frac{4 - 0}{2 - 0} = 2\,\text{m/s}

      • Section AB (t=2t = 2 to 4 s4\,\text{s}, s=4 ms = 4\,\text{m} constant):             The object remains completely stationary; velocity is 0 m/s0\,\text{m/s}.

      • Section BC (t=4t = 4 to 6 s6\,\text{s}, s=4s = 4 to 6 m6\,\text{m}):             Velocity=6−46−4=1 m/s\text{Velocity} = \frac{6 - 4}{6 - 4} = 1\,\text{m/s}

      • Overall Average Velocity (t=0t = 0 to 6 s6\,\text{s}):             Average velocity=total displacementtotal time=6 m6 s=1 m/s\text{Average velocity} = \frac{\text{total displacement}}{\text{total time}} = \frac{6\,\text{m}}{6\,\text{s}} = 1\,\text{m/s}

Newton's First Law and Resultant Forces

  • Frictional Forces:

    • Friction is a resistive force that acts in direct opposition to the relative motion of an object.

    • Directionally, friction opposing forward motion is assigned an opposite sign (e.g., if forward thrust is +60 N+60\,\text{N}, an opposing friction of 12 N12\,\text{N} acts as −12 N-12\,\text{N}).

  • Balanced Forces and Resultant Force:

    • The resultant force is the single overall force obtained by combining all individual forces acting upon an object, taking direction into account.

    • Case 1 (Object at Rest, Balanced): A car has an engine thrust of 18 N18\,\text{N} forwards and an opposing resistive friction of 18 N18\,\text{N}.         Resultant force=18 N−18 N=0 N\text{Resultant force} = 18\,\text{N} - 18\,\text{N} = 0\,\text{N}         The car remains at rest.

    • Case 2 (Object in Motion, Balanced): A car moving at 5 m/s5\,\text{m/s} has an engine thrust of 18 N18\,\text{N} forwards and an opposing friction of 18 N18\,\text{N}.         Resultant force=18 N−18 N=0 N\text{Resultant force} = 18\,\text{N} - 18\,\text{N} = 0\,\text{N}         The car continues moving at an unchanging velocity of 5 m/s5\,\text{m/s}.

  • Newton's First Law of Motion:

    • If the forces acting on a body are balanced (resultant force =0 N= 0\,\text{N}), the body will either remain at rest or continue to move at a constant velocity in a straight line.

  • Unbalanced Forces and Motion Changes:

    • Case 3 (Forward Resultant from Rest): An object at rest experiences an engine thrust of 20 N20\,\text{N} forwards against friction of 6 N6\,\text{N}.         Resultant force=20 N−6 N=14 N forwards\text{Resultant force} = 20\,\text{N} - 6\,\text{N} = 14\,\text{N}\text{ forwards}         The car starts to move and accelerates forwards.

    • Case 4 (Forward Resultant in Motion): A car moving at 5 m/s5\,\text{m/s} experiences a forward thrust of 18 N18\,\text{N} and an opposing friction of 6 N6\,\text{N}.         Resultant force=18 N−6 N=12 N forwards\text{Resultant force} = 18\,\text{N} - 6\,\text{N} = 12\,\text{N}\text{ forwards}         The car accelerates, increasing its velocity beyond 5 m/s5\,\text{m/s}.

    • Case 5 (Opposing Resultant in Motion): A car travelling at 5 m/s5\,\text{m/s} experiences forward thrust of 20 N20\,\text{N} against friction of 24 N24\,\text{N}.         Resultant force=20 N−24 N=−4 N (or 4 N backwards)\text{Resultant force} = 20\,\text{N} - 24\,\text{N} = -4\,\text{N}\text{ (or } 4\,\text{N}\text{ backwards)}         The car decelerates, reducing its velocity below 5 m/s5\,\text{m/s}.

    • Core Conclusions:

      • A non-zero resultant force causes an object to accelerate or decelerate.

      • If the resultant force is zero, the body remains at rest or travels at a constant velocity.

      • Acceleration and deceleration are directly governed by the magnitude and direction of the resultant force.

Newton's Second Law: Mass, Force, and Acceleration

  • Definition of Mass:

    • Mass is defined as the amount of matter contained within an object.

    • The standard scientific SI unit of mass is the kilogram (kg\text{kg}).

  • Comparative Dynamics (Force, Mass, Acceleration Table):

    • Car A: Forward force =60 N= 60\,\text{N}, Friction =12 N= 12\,\text{N}, Mass =4 kg= 4\,\text{kg}.         Resultant force=60−12=48 N\text{Resultant force} = 60 - 12 = 48\,\text{N}         a=48 N4 kg=12 m/s2a = \frac{48\,\text{N}}{4\,\text{kg}} = 12\,\text{m/s}^2         (Rating: 3 stars - greatest acceleration)

    • Car B: Forward force =40 N= 40\,\text{N}, Friction =16 N= 16\,\text{N}, Mass =4 kg= 4\,\text{kg}.         Resultant force=40−16=24 N\text{Resultant force} = 40 - 16 = 24\,\text{N}         a=24 N4 kg=6 m/s2a = \frac{24\,\text{N}}{4\,\text{kg}} = 6\,\text{m/s}^2         (Rating: 2 stars - intermediate acceleration)

    • Car C: Forward force =38 N= 38\,\text{N}, Friction =14 N= 14\,\text{N}, Mass =8 kg= 8\,\text{kg}.         Resultant force=38−14=24 N\text{Resultant force} = 38 - 14 = 24\,\text{N}         a=24 N8 kg=3 m/s2a = \frac{24\,\text{N}}{8\,\text{kg}} = 3\,\text{m/s}^2         (Rating: 1 star - least acceleration)

  • Mathematical Statement of Newton's Second Law:     Resultant force=mass×acceleration\text{Resultant force} = \text{mass} \times \text{acceleration}     F=m×aF = m \times a

    • FF: resultant force in Newtons (N\text{N})

    • mm: mass in kilograms (kg\text{kg})

    • aa: acceleration in metres per second squared (m/s2\text{m/s}^2)

    • Rearranged for acceleration:         a=Fma = \frac{F}{m}

  • Worked Problems on Moving Vehicles:

    • Problem 1 (Accelerating Car): A car of mass 1000 kg1000\,\text{kg} is acted upon by an engine driving force of 700 N700\,\text{N} and an opposing frictional force of 200 N200\,\text{N}.         Resultant force F=700 N−200 N=500 N\text{Resultant force } F = 700\,\text{N} - 200\,\text{N} = 500\,\text{N}         a=Fm=500 N1000 kg=0.5 m/s2a = \frac{F}{m} = \frac{500\,\text{N}}{1000\,\text{kg}} = 0.5\,\text{m/s}^2

    • Problem 2 (Throttling Back to Match Friction): Under identical conditions, the driver reduces the engine's driving force to 200 N200\,\text{N}.         Resultant force F=200 N−200 N=0 N\text{Resultant force } F = 200\,\text{N} - 200\,\text{N} = 0\,\text{N}         Because the forces are balanced (F=0 NF = 0\,\text{N}), the acceleration is zero (a=0 m/s2a = 0\,\text{m/s}^2). The car continues moving forward at a constant velocity.

Experimental Investigation of Newton's Second Law

  • Apparatus and Operational Principle:

    • Light Gate and Data Logger System: A moving trolley has an interrupt card mounted on top and passes through a light gate connected to a digital data logger.

    • Infrared Beam Interruption: The light gate projects an invisible infrared beam from an emitter source to a detector sensor.

    • Timing Mechanism: When the card passes through, it breaks the beam, causing the sensor to transmit an electrical signal to the data logger for the exact duration of the interruption. A dual-segment card interrupts the beam twice in succession, enabling the data logger to compute the initial speed, final speed, elapsed transit time, and resultant acceleration automatically.

  • Experiment 1: Acceleration versus Resultant Force (Mass Kept Constant):

    • Hypothesis: Acceleration increases as the resultant force increases.

    • Variables:

      • Independent Variable: Resultant pulling force (FF), varied using slotted weights on a hanger (each pulling with 1 N1\,\text{N} or fractions thereof).

      • Dependent Variable: Acceleration (aa).

      • Controlled Variable: Total mass of the trolley system.

    • Experimental Data:

      • F=1.0 N  ⟹  a=1.258 m/s2F = 1.0\,\text{N} \implies a = 1.258\,\text{m/s}^2

      • F=0.8 N  ⟹  a=0.997 m/s2F = 0.8\,\text{N} \implies a = 0.997\,\text{m/s}^2

      • F=0.6 N  ⟹  a=0.734 m/s2F = 0.6\,\text{N} \implies a = 0.734\,\text{m/s}^2

      • F=0.4 N  ⟹  a=0.465 m/s2F = 0.4\,\text{N} \implies a = 0.465\,\text{m/s}^2

      • F=0.2 N  ⟹  a=0.218 m/s2F = 0.2\,\text{N} \implies a = 0.218\,\text{m/s}^2

    • Conclusion: The plotted graph of acceleration against resultant force is a straight line that passes directly through the origin. Therefore, acceleration is directly proportional to resultant force (a∝Fa \propto F).

    • Mathematical Verification: Confirming direct proportionality requires verifying that the ratio Fa\frac{F}{a} remains constant:         1.01.258=0.79\frac{1.0}{1.258} = 0.79         0.80.997=0.80\frac{0.8}{0.997} = 0.80         0.60.734=0.81\frac{0.6}{0.734} = 0.81         Because Fa≈0.80 kg\frac{F}{a} \approx 0.80\,\text{kg} is constant within experimental uncertainty, direct proportionality is proven.

  • Experiment 2: Acceleration versus Mass (Force Kept Constant):

    • Hypothesis: Acceleration decreases as the mass of the moving object increases.

    • Variables:

      • Independent Variable: Total mass (mm) of the trolley, varied by stacking slotted masses.

      • Dependent Variable: Acceleration (aa).

      • Controlled Variable: Accelerating pulling force (FF).

    • Experimental Data:

      • m=340 g  ⟹  a=2.12 m/s2m = 340\,\text{g} \implies a = 2.12\,\text{m/s}^2

      • m=440 g  ⟹  a=1.70 m/s2m = 440\,\text{g} \implies a = 1.70\,\text{m/s}^2

      • m=490 g  ⟹  a=1.44 m/s2m = 490\,\text{g} \implies a = 1.44\,\text{m/s}^2

      • m=540 g  ⟹  a=1.26 m/s2m = 540\,\text{g} \implies a = 1.26\,\text{m/s}^2

      • m=640 g  ⟹  a=1.18 m/s2m = 640\,\text{g} \implies a = 1.18\,\text{m/s}^2

      • m=740 g  ⟹  a=1.06 m/s2m = 740\,\text{g} \implies a = 1.06\,\text{m/s}^2

    • Conclusion: The plotted graph of acceleration against mass is a downward-sloping curve that does not form a straight line and does not pass through the origin. Acceleration is inversely proportional to mass (a∝1ma \propto \frac{1}{m}).

    • Mathematical Verification: Inverse proportionality is confirmed if the product m×am \times a is constant:         340 g×2.12 m/s2=720.8340\,\text{g} \times 2.12\,\text{m/s}^2 = 720.8         440 g×1.70 m/s2=748.0440\,\text{g} \times 1.70\,\text{m/s}^2 = 748.0         540 g×1.26 m/s2=680.4540\,\text{g} \times 1.26\,\text{m/s}^2 = 680.4         The values cluster around a constant product, confirming inverse proportionality.

Mathematical Relationships in Oscillations (Simple Pendulum)

  • Period of a Simple Pendulum:

    • The period (TT) is defined as the time taken for a pendulum bob to swing fully to the opposite side and return to its initial release position.

    • Maureen's Theoretical Hypothesis: The square of the period (T2T^2) is directly proportional to the string length (LL):         T2=k×LT^2 = k \times L         where kk is a proportionality constant.

  • Empirical Results Table:

    • L=0.2 mL = 0.2\,\text{m}, T=0.9 s  ⟹  T2=0.8 s2T = 0.9\,\text{s} \implies T^2 = 0.8\,\text{s}^2

    • L=0.3 mL = 0.3\,\text{m}, T=1.1 s  ⟹  T2=1.2 s2T = 1.1\,\text{s} \implies T^2 = 1.2\,\text{s}^2

    • L=0.4 mL = 0.4\,\text{m}, T=1.3 s  ⟹  T2=1.7 s2T = 1.3\,\text{s} \implies T^2 = 1.7\,\text{s}^2

    • L=0.6 mL = 0.6\,\text{m}, T=1.6 s  ⟹  T2=2.6 s2T = 1.6\,\text{s} \implies T^2 = 2.6\,\text{s}^2

    • L=0.7 mL = 0.7\,\text{m}, T=1.7 s  ⟹  T2=2.9 s2T = 1.7\,\text{s} \implies T^2 = 2.9\,\text{s}^2

  • Evaluation and Verification:

    • Plotting T2T^2 on the vertical y-axis against LL on the horizontal x-axis yields a straight line of best fit that passes directly through the coordinate origin (0,0)(0, 0).

    • Because the line is straight and intersects the origin, T2T^2 is directly proportional to LL (T2∝LT^2 \propto L), confirming Maureen's theory.

Gravity, Weight, and Free Fall

  • The Physical Origin of Weight:

    • Gravity exerts an attractive pull on all masses directed toward the centre of the Earth.

    • When an object is released from rest near Earth's surface, it accelerates downwards.

  • Free Fall and Air Resistance:

    • Drop Comparisons in Atmospheric Air:

      • Dropping a 100 g100\,\text{g} mass, a 10 g10\,\text{g} mass, and a small piece of paper simultaneously reveals that the 100 g100\,\text{g} and 10 g10\,\text{g} masses hit the floor at the same time, while the paper falls noticeably slower.

      • The delay of the paper is caused by air resistance (aerodynamic drag) having a significant effect relative to its light weight, rather than differences in gravitational acceleration.

    • Vacuum Drop Demonstration (Coin and Feather):

      • In the presence of air, a feather falls slowly due to air resistance.

      • In a complete vacuum chamber, a feather and a dense mass fall at identical speeds and strike the base at the exact same moment.

    • Fundamental Free Fall Law: In the absence of opposing forces such as air resistance, all objects near the surface of the Earth fall with the exact same acceleration, regardless of their mass.

  • The Acceleration of Free Fall (gg):

    • The standard acceleration of free fall near Earth's surface is represented by g=10 m/s2g = 10\,\text{m/s}^2.

    • Physical Meaning: During uninterrupted free fall, an object's downward velocity increases by 10 m/s10\,\text{m/s} every single second.

    • Upward Projectile Motion: When an object is projected vertically upward, gravity opposes its upward velocity, producing a deceleration of −10 m/s2-10\,\text{m/s}^2. Its speed decreases by 10 m/s10\,\text{m/s} every second until it reaches instantaneous rest at the peak of its trajectory.

  • Weight versus Mass:

    • Mass (mm): The fundamental amount of matter in a body. Measured in kilograms (kg\text{kg}). It remains invariant regardless of the gravitational environment.

    • Weight (WW): The gravitational force exerted on an object. Measured in Newtons (N\text{N}). It varies depending on the strength of the local gravitational field.

    • Mathematical Formula:         W=m×gW = m \times g

    • Earth Surface Conversion: Because g=10 m/s2g = 10\,\text{m/s}^2 on Earth, every 1 kg1\,\text{kg} of mass has a weight of 10 N10\,\text{N}.

    • Gravitational Pull / Field Strength:         g=Wmg = \frac{W}{m}

      • Evaluating for a 30 kg30\,\text{kg} child with a weight of 300 N300\,\text{N}:             g=300 N30 kg=10 N/kgg = \frac{300\,\text{N}}{30\,\text{kg}} = 10\,\text{N/kg}

      • The gravitational field strength on Earth is 10 N/kg10\,\text{N/kg}, meaning gravity pulls with a downward force of 10 N10\,\text{N} on every 1 kg1\,\text{kg} of mass.

  • Comparing Gravitational Dynamics: Earth versus Moon:

    • Acceleration of Free Fall: The Moon has less total mass than the Earth, resulting in a substantially lower acceleration of free fall (gMoon≈1.6 m/s2g_{\text{Moon}} \approx 1.6\,\text{m/s}^2 compared to gEarth=10 m/s2g_{\text{Earth}} = 10\,\text{m/s}^2).

    • Weight of a Body: The weight of an object on the Moon is smaller than on Earth because the Moon's gravitational pull is weaker.

    • Mass of a Body: The mass of an object on the Moon remains identical to its mass on Earth because the actual quantity of matter is unchanged.

Newton's Third Law and Multi-Force Dynamics

  • Newton's Third Law of Motion:

    • Newton's Third Law states that every action force has an equal and opposite reaction force.

    • When Object A exerts a force on Object B, Object B simultaneously exerts an equal force in the opposite direction on Object A.

  • Static Equilibrium on a Solid Surface:

    • Consider a 30 kg30\,\text{kg} child standing stationary on level ground:

      • Downward gravitational force (Weight): W=30 kg×10 m/s2=300 NW = 30\,\text{kg} \times 10\,\text{m/s}^2 = 300\,\text{N}.

      • Upward contact force (Normal Reaction): The ground exerts a supporting normal reaction force of 300 N300\,\text{N} upwards against the child's feet.

      • Resultant force: 300 N−300 N=0 N300\,\text{N} - 300\,\text{N} = 0\,\text{N}.

      • Because the resultant force is 0 N0\,\text{N}, the child remains at rest in equilibrium.

  • Comprehensive Dynamic Case Studies:

    • Case 1: Diver Standing Stationary on a Diving Board:

      • Mass m=60 kgm = 60\,\text{kg}.

      • Weight: W=m×g=60 kg×10 m/s2=600 NW = m \times g = 60\,\text{kg} \times 10\,\text{m/s}^2 = 600\,\text{N}, acting downwards.

      • Resultant force: 0 N0\,\text{N} (the diver is stationary).

      • Supporting reaction force exerted by the board: 600 N600\,\text{N}, acting upwards.

    • Case 2: Diver in Free Fall through Air:

      • The diver steps off the board and falls through the air (neglecting air resistance).

      • Downward gravitational force: 600 N600\,\text{N}.

      • Resultant force: 600 N600\,\text{N}, acting downwards.

      • Acceleration: a=g=10 m/s2a = g = 10\,\text{m/s}^2, directed downwards.

    • Case 3: Diver Decelerating through Water:

      • Upon entering the swimming pool, the water exerts an upward drag/buoyant force of 240 N240\,\text{N} opposing downward motion.

      • Downward gravitational force: 600 N600\,\text{N}.

      • Resultant downward force:             F=600 N−240 N=360 N downwardsF = 600\,\text{N} - 240\,\text{N} = 360\,\text{N}\text{ downwards}

      • Acceleration through the water:             a=Fm=360 N60 kg=6 m/s2 downwardsa = \frac{F}{m} = \frac{360\,\text{N}}{60\,\text{kg}} = 6\,\text{m/s}^2\text{ downwards}

    • Case 4: Vertical Rocket Launch:

      • A toy rocket has a mass of 2.0 kg2.0\,\text{kg}.

      • Expelled exhaust gases generate an upward thrust of 30 N30\,\text{N}.

      • Downward weight of the rocket:             W=m×g=2.0 kg×10 m/s2=20 NW = m \times g = 2.0\,\text{kg} \times 10\,\text{m/s}^2 = 20\,\text{N}

      • Resultant vertical force:             F=30 N−20 N=10 N upwardsF = 30\,\text{N} - 20\,\text{N} = 10\,\text{N}\text{ upwards}

      • Vertical launch acceleration:             a=Fm=10 N2.0 kg=5 m/s2 upwardsa = \frac{F}{m} = \frac{10\,\text{N}}{2.0\,\text{kg}} = 5\,\text{m/s}^2\text{ upwards}