Untitled Flashcard Set

HES 352 MIDTERM — KNOWT REVIEW OUTLINE

1. PLANES AND AXES

  • Sagittal plane

    • Divides body into left and right halves

    • Axis: medio-lateral (ML)

    • Movements: flexion and extension

  • Frontal (coronal) plane

    • Divides body into anterior and posterior sections

    • Axis: antero-posterior (AP)

    • Movements: abduction and adduction

  • Transverse plane

    • Divides body into top and bottom halves

    • Axis: longitudinal

    • Movements: supination and pronation

  • Key rule: Movements occur around an axis perpendicular to the plane.

2. EPITHELIAL TISSUE

Tissue Basics

  • Tissue: group of similar cells working together to perform a common function.

  • Four main tissue types:

    • Epithelial: covering and lining; creates boundaries between environments.

    • Connective: support, connection, and assistance with bone regeneration; blood is an example.

    • Muscle: movement and function.

    • Nervous: control; brain is an example.

Epithelial Tissue Functions

  • Protection: skin.

  • Absorption: digestive tract.

  • Filtration: kidney.

  • Excretion: eliminates waste.

  • Secretion: releases mucus or other materials onto a cell surface.

  • Sensory reception: specialized receptors help regulate heart rate and blood pressure.

Characteristics of Epithelial Tissue

  • Cellularity: tightly packed cells with little extracellular material.

  • Specialized contacts:

    • Tight junctions: create barriers.

    • Desmosomes: connect cells and act as a filter, according to the study guide.

    • Gap junctions: allow immediate cell-to-cell communication.

  • Polarity: apical (top) and basal (bottom) surfaces differ.

  • Basement (basal) membrane: separates epithelium from underlying connective tissue; filters, assists tissue repair, and resists stretching and tearing.

    • Basal lamina: superficial layer.

    • Reticular lamina: deep layer.

  • Innervated: nerves detect stimuli.

  • Avascular: lacks blood supply.

  • High regeneration capacity: rapid cell division replaces frequently damaged tissue.

Basic Epithelial Shapes

  • Squamous: flat and thin.

  • Cuboidal: cube-shaped, thick, and dense.

  • Columnar: tall and dense.

  • Each can occur in simple or stratified forms where applicable.

Types of Epithelium

  • Simple squamous:

    • One layer of flat cells with disc-shaped central nuclei.

    • Functions: diffusion, filtration, secretion.

    • Location: lung air sacs.

  • Simple cuboidal:

    • One layer of cube-shaped cells with large, spherical central nuclei.

    • Functions: secretion and absorption.

    • Location: kidney tubules.

  • Simple columnar:

    • One layer of tall cells with round/oval nuclei; may contain cilia or goblet cells.

    • Functions: absorption, secretion, propulsion by ciliary action.

    • Location: digestive tract.

  • Pseudostratified columnar:

    • One layer of cells of different heights; nuclei appear at different levels; may contain cilia or goblet cells.

    • Functions: secretion and propulsion by ciliary action.

    • Location: trachea.

  • Stratified squamous:

    • Several cell layers; basal cells are cuboidal or columnar, surface cells are squamous.

    • Function: protection.

    • Location: esophagus.

  • Transitional:

    • Resembles stratified squamous and stratified cuboidal; basal cells are cuboidal or columnar and surface cells are squamous.

    • Function: stretching and distension.

    • Locations: ureters and bladder.

3. CONNECTIVE TISSUE

General Characteristics and Functions

  • Connective tissue connects and supports body structures.

  • Fibroblast → fibrocyte → connective tissue proper → loose and dense connective tissue.

  • Dense connective tissue: avascular.

  • Loose connective tissue: vascular.

  • Functions:

    • Binding and support: provides internal structural organization.

    • Protection: ribs protect lungs; skull protects brain.

    • Insulation: body fat helps maintain temperature.

    • Transportation: transports nutrients and waste.

    • Protection from microorganisms: immune system.

Connective Tissue Fibers

  • Collagen fibers:

    • Composed of collagen.

    • Strong; provide tensile strength.

  • Elastic fibers:

    • Composed of elastin.

    • Allow stretching and recoil.

  • Reticular fibers:

    • Fine collagenous fibers.

    • Provide a supportive framework and help connective tissue bind to epithelium at transitional locations.

Mesenchyme

  • Embryonic connective tissue.

  • Gives rise to bone, cartilage, connective tissue, and blood cells.

  • All connective tissue originates from mesenchyme.

Loose Connective Tissue

  • Fills spaces between organs.

  • Areolar:

    • Contains collagen, elastic, and reticular fibers.

    • Functions: cushions organs and participates in inflammation.

    • Location: beneath epithelia.

  • Adipose:

    • Contains increased numbers of adipocytes (fat cells).

    • Functions: fuel reserve, insulation against heat loss, support, and organ protection.

    • Location: beneath skin.

  • Reticular:

    • Contains a network of reticular fibers only.

    • Function: forms a soft internal supporting skeleton (stroma).

    • Locations: spleen, lymph nodes, bone marrow.

Dense Connective Tissue

  • Contains densely packed fibers.

  • Dense regular:

    • Parallel collagen fibers with few elastin fibers.

    • Attaches muscles to bones or other muscles and bones to bones.

    • Resists tensile stress in one direction.

    • Locations: tendons and ligaments.

  • Dense irregular:

    • Randomly arranged collagen fibers with few elastic fibers.

    • Resists tension in multiple directions.

    • Locations: skin, stomach, fibrous joint capsule.

  • Elastic connective tissue:

    • Contains elastin fibers.

    • Low tensile strength; stretches easily without tearing.

    • Locations: aorta, ligamentum nuchae, lamina of vertebrae.

Body Membranes

  • Cutaneous membrane:

    • Dry membrane.

    • Example: skin.

  • Mucous membrane:

    • Wet membrane lining body cavities that open to the exterior.

    • Locations: digestive and respiratory systems.

  • Serous membrane:

    • Wet membrane lining closed body cavities.

    • Examples: pleura, pericardium, peritoneum.

  • Parietal layer:

    • Lines the internal surface of body cavities.

  • Visceral layer:

    • Covers the surface of internal organs.

  • Parietal and visceral layers form a double-layered membrane that protects and supports organs such as the heart and lungs.

4. CARTILAGE

Characteristics

  • Chondroblast → chondrocyte → cartilage → hyaline, elastic, and fibrocartilage.

  • Functions: cushions and supports body structures.

  • Avascular and not innervated → slow healing.

  • Approximately 80% water; fluidity helps maintain cartilage integrity.

  • Chondrocytes:

    • Mature cartilage cells.

    • Located in small spaces in the extracellular matrix called lacunae.

    • Maintain cartilage.

  • Perichondrium:

    • Two layers: dense irregular connective tissue sheath and inner cellular layer.

  • Cartilage acts as a shock absorber and supports connective tissue.

Types of Cartilage

  • Hyaline:

    • Most abundant and weakest type in the study guide.

    • Contains collagen fibers (listed as type I in the guide).

    • Creates a low-friction surface and absorbs shock.

    • Locations: ends of long bones, costal cartilages, epiphyseal plates.

    • Destruction of hyaline cartilage in osteoarthritis can result in bone-on-bone contact.

  • Elastic:

    • Similar to hyaline but contains more elastic fibers (elastin).

    • Function: flexibility.

    • Locations: ear, epiglottis, cuneiform cartilages of larynx.

  • Fibrocartilage:

    • Contains type I and II collagen and little elastin.

    • Tough and durable; lacks perichondrium.

    • Functions: compressibility, resistance to tension, shock absorption.

    • Locations: pubic symphysis and knee joint discs.

5. BONE

Bone Cells and Functions

  • Osteoblast → osteocyte → osseous (bone) tissue → compact and spongy bone.

  • Osteoblasts: build bone.

  • Osteoclasts: break down bone.

  • Functions:

    • Support.

    • Protection.

    • Movement.

    • Mineral storage.

    • Red blood cell formation (erythropoiesis).

Forces Acting on Bone

  • Compression:

    • Calcium (Ca²⁺) provides strength against compression.

  • Torsion:

    • Collagen provides strength against twisting.

  • Tension:

    • Collagen provides strength against pulling forces.

Types of Bone

  • Dense bone.

  • Compact bone:

    • Dense outer layer.

    • Innervated, so fractures can be painful.

    • Entirely compact bone would be too heavy.

  • Spongy bone:

    • Porous inner structure.

    • Provides strength in multiple directions, minimizes damage, and adapts to stress.

  • Trabecular/cancellous bone:

    • Decreases bone density.

    • Provides flexibility and space for blood and nutrient supply.

    • Stress lines help bone withstand different amounts of stress.

Long Bone Structure

  • Long bones have a shaft and expanded ends.

  • Examples: femur, humerus, tibia, fibula, metacarpals, metatarsals.

  • Diaphysis:

    • Shaft.

    • Compact bone.

    • Dense and resistant to bending and torsion.

  • Epiphysis:

    • Proximal and distal ends grow separately.

    • Connects with other bones.

    • Composed of spongy bone.

    • Medullary cavity: site of red blood cell production; eventually becomes filled with yellow bone marrow, which slows red blood cell production.

    • Articular surfaces covered by hyaline cartilage for smooth, low-friction movement.

    • Epiphyseal line: remnant of the growth plate.

  • Periosteum:

    • Vascular membrane anchored to the outer bone surface by Sharpey's fibers.

    • External layer: dense irregular connective tissue.

    • Inner layer: osteoblasts and osteoclasts.

    • Osteoblast activity exceeding osteoclast activity allows new bone formation.

Other Bone Shapes

  • Short bones:

    • Length and width approximately equal.

    • Examples: carpals and tarsals.

  • Flat bones:

    • Plate-like with broad surfaces; protective.

    • Examples: skull, sternum, ribs, scapulae.

  • Irregular bones:

    • Varied shapes.

    • Examples: mandible and vertebrae.

  • Sesamoid bones:

    • Short bones embedded in tendons.

    • Improve leverage and alter tendon pull direction.

    • Example: patella.

Microscopic Bone Structure

  • Lamellae:

    • Bone matrix arranged in concentric rings around longitudinal canals.

  • Haversian system (osteon):

    • Concentric lamellae surrounding a Haversian canal.

    • Alternating collagen fiber directions help resist torsion.

  • Haversian canals:

    • Vertical canals containing blood vessels that supply nutrients and help bone heal.

  • Volkmann's canals:

    • Horizontal canals connecting Haversian canals.

  • Lacunae:

    • Spaces between lamellae containing osteocytes.

  • Canaliculi:

    • Connect lacunae.

Bone Formation: Osteogenesis/Ossification

  • Osteogenesis or ossification = bone formation.

  • Two methods:

    • Intramembranous: bone develops from fibrous connective tissue membrane; associated with flat bones.

    • Endochondral: bone develops from hyaline cartilage; associated with long bones.

Intramembranous Ossification

  1. Mesenchymal cells cluster in a membrane, forming an ossification center and becoming osteoblasts.

  2. Osteoblasts secrete osteoid.

  3. Alkaline phosphatases help mineralize/calcify osteoid.

  4. Bone spicules form; osteoblasts trapped in matrix become osteocytes.

  5. Randomly oriented osteocytes occur throughout woven bone.

  6. Surrounding mesenchyme condenses to form periosteum.

  7. Result: two outer compact bone layers with trabecular (spongy) bone between them.

Endochondral Ossification

  1. Blood vessels invade the hyaline cartilage perichondrium, which becomes periosteum.

    • Mesenchymal cells become osteoblasts.

    • Osteoblasts secrete osteoid, forming a bone collar around the diaphysis.

  2. Chondrocytes enlarge (hypertrophy) and calcify surrounding cartilage.

    • Calcification cuts off nutrients, causing chondrocytes to die.

    • Calcified cartilage breaks down, forming an internal cavity in the diaphysis.

  3. Periosteal tissue invades the cavity.

  4. Osteoblasts deposit osteoid on remaining calcified cartilage, forming trabecular bone.

  5. Osteoclasts break down spongy bone, creating the medullary cavity.

  6. Secondary ossification centers form in the epiphyses.

  7. Hyaline cartilage remains at articular surfaces and epiphyseal growth plates.

Bone Growth and Remodeling

  • Longitudinal growth:

    • Occurs through endochondral ossification at the epiphyseal growth plate.

    • Growth plates become thinner as mitosis slows with aging and eventually ossify.

  • Appositional growth:

    • Increases bone diameter and thickness.

    • Strengthens bone.

    • Continues throughout life in response to stress.

  • Wolff's law:

    • Bone remodels in response to applied stress.

    • Bone becomes thicker at areas experiencing maximum stress.

Calcium Homeostasis and Negative Feedback

  • Low blood Ca²⁺:

    • Parathyroid glands release parathyroid hormone (PTH).

    • PTH stimulates osteoclasts to break down bone.

    • Ca²⁺ is released into blood.

  • High blood Ca²⁺:

    • Thyroid releases calcitonin.

    • Osteoblast activity increases.

    • Ca²⁺ is deposited into bone.

Osteoporosis

  • Bone resorption exceeds bone formation.

  • Osteoblast activity slows while osteoclast activity remains relatively constant.

  • Bone becomes more porous and lighter, although its chemical composition remains the same.

  • Estrogen:

    • Helps maintain bone mass by mediating PTH activity and inhibiting osteoclast activity.

    • After menopause, estrogen decreases → increased bone resorption → accelerated bone loss.

  • Factors accelerating bone loss:

    • Insufficient exercise.

    • Immobility.

    • Diet lacking calcium and protein.

    • Abnormal vitamin D and calcitonin metabolism.

    • Smoking.

  • Treatments that can slow decline:

    • Calcium and vitamin D supplements.

    • Weight-bearing exercise.

    • Hormone replacement therapy.

    • Bone-specific medications.

6. JOINTS

Joint Basics and Classification

  • Joints connect two or more bones and permit skeletal movement.

  • Functional classification: based on movement.

    • Synarthrodial: immovable; associated with axial skeleton.

    • Amphiarthrodial: slightly movable; associated with axial skeleton.

    • Diarthrodial: freely movable; associated with appendicular skeleton.

  • Structural classification: based on material binding bones and presence/absence of a joint cavity.

Fibrous Joints

  • Bones connected by dense fibrous connective tissue.

  • No joint cavity.

  • Generally immovable.

  • Sutures:

    • Found only in skull.

    • Interlocking bones held by short, dense connective tissue fibers.

    • In adults, fibrous tissue can ossify and fuse bones, forming synostoses.

  • Syndesmoses:

    • Bones connected by ligaments or an interosseous membrane.

    • Fiber length determines movement.

    • Tibiofibular ligament: short fibers and limited movement.

    • Interosseous membrane between radius and ulna permits pronation and supination.

  • Gomphoses:

    • Periodontal ligament holds tooth roots.

Cartilaginous Joints

  • Bones connected by cartilage.

  • No joint cavity.

  • Generally slightly movable.

  • Synchondroses:

    • Bones connected by hyaline cartilage.

    • Permit bone growth and eventually ossify.

    • Example: epiphyseal plate.

  • Symphyses:

    • Hyaline cartilage associated with an intervening fibrocartilage plate.

    • Act as shock absorbers and permit slight movement.

    • Examples: intervertebral discs and pubic symphysis.

    • Do not ossify, according to the guide.

Synovial Joints

  • Bones separated by a joint cavity.

  • Freely movable.

  • Articular cartilage:

    • Hyaline cartilage covering bone ends.

    • Reduces friction, absorbs shock, and allows motion.

  • Joint cavity:

    • Contains synovial fluid.

    • Provides nutrients and shock absorption.

  • Articular (joint) capsule:

    • Fibrous capsule: tough outer layer and first line of protection.

    • Synovial membrane: inner loose connective tissue that produces synovial fluid and lines internal surfaces except articular cartilage.

  • Synovial fluid:

    • Derived from filtration of blood plasma through synovial membrane capillaries.

    • Decreases friction through weeping lubrication.

    • Provides diffusion essential to avascular articular cartilage.

  • Ligaments:

    • Capsular/intrinsic: part of joint capsule.

    • Extracapsular: outside capsule.

    • Intracapsular: inside capsule but not part of capsule wall.

  • Menisci:

    • Fibrocartilage pads that improve joint stability.

  • Fatty pads:

    • Adipose tissue that cushions and protects joints.

  • Bursae:

    • Synovial membrane-lined sacs containing synovial fluid.

    • Reduce friction.

  • Tendon sheaths:

    • Elongated bursae surrounding tendons.

    • Reduce friction.

    • Inflammation can cause tendinitis or swelling.

Joint Stability and Mobility

  • Stability: resistance to unwanted movement and maintenance of alignment.

  • Mobility: range of motion permitted.

  • Joints lie on a spectrum between stability and mobility.

  • Shoulder: more mobile, less stable.

  • Hip: more stable, less mobile.

Joint Movement Axes

  • Nonaxial: gliding; no axis of rotation. Examples: intercarpal and intertarsal.

  • Uniaxial: movement in one plane. Example: elbow.

  • Biaxial: movement in two planes. Examples: metacarpophalangeal and carpometacarpal joints.

  • Triaxial: movement in three planes. Examples: shoulder and hip.

Six Types of Synovial Joints

  • Plane:

    • Nonaxial; flat surfaces glide past each other.

    • Examples: intercarpal, intertarsal, vertebral joints.

  • Hinge:

    • Uniaxial; convex surface fits into concave surface.

    • Examples: elbow and interphalangeal joints.

  • Pivot:

    • Uniaxial; rounded end rotates within a ring formed by bone and ligament.

    • Examples: atlas/axis and proximal radioulnar joint.

  • Condyloid:

    • Biaxial; oval condyle fits into oval depression.

    • Examples in the guide: knee and metacarpophalangeal joints.

  • Saddle:

    • Biaxial; each surface is concave in one direction and convex in another.

    • Example: carpometacarpal joint of thumb.

  • Ball-and-socket:

    • Triaxial; spherical head fits into cup-like socket.

    • Examples: hip and shoulder.

Shoulder Joint and Shoulder Complex

  • Glenohumeral joint:

    • Diarthrotic, multiaxial, ball-and-socket.

    • Formed by humeral head and glenoid fossa of scapula.

    • Most freely moving joint in the body; lacks stability.

  • Shoulder complex includes:

    • Glenohumeral.

    • Acromioclavicular.

    • Sternoclavicular.

    • Scapulothoracic.

  • Coracohumeral ligament:

    • Coracoid process to greater tubercle of humerus.

    • Supports weight of upper extremity.

  • Coracoacromial ligament:

    • Coracoid process to acromion.

    • Prevents superior displacement of humeral head.

  • Coracoclavicular ligament:

    • Coracoid process to clavicle.

    • Stabilizes acromioclavicular joint.

  • Glenohumeral ligaments:

    • Superior, middle, inferior.

    • Reinforce anterior capsule.

    • Thin and weak; limit anterior dislocation.

  • Transverse humeral ligament:

    • Spans greater and lesser humeral tubercles.

    • Keeps long head of biceps tendon in intertubercular groove.

  • Shoulder dislocation:

    • Commonly inferior and anterior because the anterior capsule is weakest and the inferior region has less ligament support.

  • Long head of biceps brachii:

    • Muscle/tendon helps stabilize the humeral head in the glenoid fossa during contraction.

  • Rotator cuff:

    • Subscapularis, supraspinatus, infraspinatus, teres minor.

    • Enables internal/external rotation and stabilizes the shoulder.

  • Shoulder movements:

    • Flexion/extension: sagittal plane.

    • Abduction/adduction: coronal plane.

    • Internal/external rotation: transverse plane.

    • Horizontal flexion/extension: transverse plane.

    • Circumduction: multiplanar.

Elbow Joint

  • Humeroulnar joint:

    • Diarthrotic, uniaxial hinge joint.

    • Trochlea of humerus articulates with trochlear notch of ulna.

    • Allows flexion/extension.

  • Radioulnar joint:

    • Uniaxial pivot joint between radius and ulna.

    • Allows supination/pronation.

    • Uses annular ligament.

  • Articular capsule:

    • Allows large ROM.

    • Extends from the coronoid and olecranon fossae of humerus to the coronoid process and olecranon of ulna and includes the annular ligament.

  • Ulnar collateral ligament (UCL):

    • Medial side.

    • Prevents valgus movement.

  • Radial collateral ligament (RCL):

    • Lateral side.

    • Prevents varus movement.

  • Valgus carrying angle:

    • Trochlea extends farther than capitulum.

    • Approximately 10–15 degrees.

Hip Joint

  • Diarthrotic, multiaxial, ball-and-socket.

  • Femoral head articulates with acetabulum of pelvis.

  • Good ROM, but ligaments and bony structure limit ROM more than at shoulder.

  • Acetabular labrum:

    • Fibrocartilage rim.

    • Deepens acetabulum and improves fit between articular surfaces.

  • Intrinsic stability:

    • Dislocations are uncommon.

  • Femoral neck:

    • Length and angle influence ROM.

  • Ligamentum teres:

    • Connects femoral head to acetabulum.

    • Provides minimal mechanical support.

    • Supplies blood to femoral head.

    • Damage can contribute to avascular necrosis.

  • Hip capsule ligaments:

    • Iliofemoral: V-shaped, anterior.

    • Pubofemoral: triangular, inferior.

    • Ischiofemoral: spirals posteriorly.

  • Neck-to-shaft angle:

    • Coxa vara: femoral head lower; lateral stress on hip and medial stress on knee, associated with knock-knee alignment in the guide.

    • Coxa valga: femoral head higher; medial stress on hip and lateral stress on knee, associated with bow-legged alignment in the guide.

  • Angle of anteversion:

    • Normal approximately 12 degrees.

    • Greater than 12 degrees: internal rotation.

    • Less than 12 degrees: external rotation.

  • Q-angle:

    • Quadriceps alignment angle between hip and knee.

    • Greater than 20 degrees is highlighted in the guide.

    • Women typically have a higher Q-angle due to a wider pelvis.

    • May increase susceptibility to patellofemoral pain because the patella tends to track laterally.

  • Hip movements:

    • Flexion/extension: sagittal plane.

    • Adduction/abduction: coronal plane.

    • Internal/external rotation: transverse plane.

    • Horizontal abduction/adduction: transverse plane with hip fixed at 90 degrees.

    • Circumduction: multiplanar.

Knee Joint

  • Largest joint in the body; complex.

  • Patellofemoral joint:

    • Diarthrotic, uniaxial.

    • Patella glides along trochlear groove.

    • Related conditions: chondromalacia and patellar tendinitis.

  • Medial/lateral tibiofemoral joints:

    • Diarthrotic and biaxial.

    • During flexion, femur rolls, glides, and rotates.

  • Bones involved: tibia, patella, femur.

  • Fibula is not part of the knee joint.

  • Instant center of rotation:

    • Knee is a condylar joint.

    • Axis of rotation changes location as the knee extends.

  • Medial and lateral menisci:

    • Semilunar cartilage.

    • Stabilize joint and absorb shock.

    • Attached only at outer margins, which are vascular.

    • Increase contact area and reduce pressure and friction.

  • Joint capsule:

    • Present medially, laterally, and posteriorly.

  • Anterior structures:

    • Patellar ligament.

    • Medial and lateral patellar retinacula.

  • Extracapsular ligaments:

    • MCL (medial/tibial collateral): prevents valgus (medial) stress.

    • LCL (lateral/fibular collateral): prevents varus (lateral) stress.

  • Intracapsular ligaments:

    • ACL:

      • Attaches anterior tibia to medial surface of lateral femoral condyle.

      • Prevents anterior translation of tibia and posterior sliding of femur.

    • PCL:

      • Attaches posterior tibia to lateral surface of medial femoral condyle.

      • Prevents posterior translation of tibia and anterior sliding of femur.

    • ACL and PCL cross between femoral condyles.

  • Bursae:

    • Fluid-filled sacs that protect and reduce friction between soft tissues and bone.

Arthritis and Treatments

  • Acute arthritis:

    • Bacterial infection.

    • Can damage articular cartilage and synovial membrane.

    • Treatment: antibiotics.

  • Chronic osteoarthritis:

    • Most common type.

    • Wear-and-tear degeneration breaks down articular cartilage, leading to bone-on-bone contact.

    • Osteophytes (bony spurs) may form.

    • Crepitus: grating sound.

    • Common in weight-bearing joints: knees, hips, spine.

    • Common in older adults.

    • Treatments listed: aspirin, weight loss, exercise, NSAIDs.

  • Rheumatoid arthritis:

    • Autoimmune disease; immune system attacks its own tissues.

    • Guide links it to streptococcus or a bacterium/virus.

    • Begins with synovial membrane inflammation and can eventually affect all tissues.

    • Symmetric.

    • Treatment listed: surgery/joint replacement.

  • Gouty arthritis:

    • Uric acid builds up in joints, causing inflammation and pain.

    • Treatments: dietary management and drugs that lower uric acid.

7. STRETCHING AND FLEXIBILITY

Types of Stretching

  • Ballistic:

    • Rapid bouncing movements.

    • Attempts to force muscle beyond normal range.

    • Potential for injury.

    • Can trigger stretch reflex.

    • Not commonly used.

  • Static:

    • Slow, controlled stretching.

    • Holds of 20–30 seconds.

    • Reduces likelihood of stretch reflex.

  • Proprioceptive neuromuscular facilitation (PNF):

    • Lengthen muscle → isometric contraction → increase stretch to a new position.

    • Described as most effective in the guide because of:

      • Greater muscle relaxation from increased Golgi tendon organ discharge.

      • Reduced muscle spindle activity and reflex contraction.

      • Stretch perception.

      • Tolerance modulation.

Flexibility

  • Flexibility: ROM available at a joint; joint-specific and dependent on joint structure.

  • Benefits:

    • Helps achieve positions that improve performance, such as faster times or higher artistic scores.

    • Greater ROM may increase the time over which force can be developed, potentially increasing velocity.

  • Factors affecting flexibility:

    • Age: tends to decline unless an intervention program is used.

    • Sex: females are typically more flexible than males.

    • Environment: local warming improves flexibility; cooling decreases it.

    • Training: flexibility exercises increase flexibility.

    • Musculoskeletal structure: bone, ligaments, connective tissue, muscle, and tendon.

8. MUSCLE GENERAL CHARACTERISTICS

Basic Characteristics

  • Muscle cells are elongated and called muscle fibers.

  • Contraction depends on actin and myosin microfilaments.

  • Excitability (irritability):

    • Ability to receive and respond to a stimulus.

    • Usually a chemical stimulus (neurotransmitter) produces an electrical response (action potential) that triggers contraction.

  • Contractility:

    • Ability to shorten and produce force.

  • Extensibility:

    • Ability to stretch without damage.

  • Elasticity:

    • Ability to return to resting length after stretching or contraction.

Three Types of Muscle

  • Cardiac:

    • Found only in heart.

    • Involuntary.

    • Pumps blood.

  • Smooth:

    • Found in walls of organs and blood vessels.

    • Involuntary.

    • Moves substances through the body.

  • Skeletal:

    • Attached to bones.

    • Voluntary.

    • Produces body movement.

Muscle Functions

  • Movement:

    • Internal: cardiac muscle pumps blood; smooth muscle moves waste/products through organs.

    • External: skeletal muscle enables interaction with the environment.

  • Posture:

    • Maintains body position; head position is critical.

  • Joint stabilization:

    • Rotator cuff stabilizes shoulder.

    • Muscles crossing knee stabilize the joint.

  • Heat generation:

    • Muscle contractions generate heat and help maintain body temperature.

    • Guide notes approximately 90–105°F as a dangerous temperature range.

9. CARDIAC MUSCLE

  • Found only in heart.

  • Sarcomeres create a striated appearance.

  • Fibers are short, thick, branched, interconnected, and contain one or two nuclei.

  • T-tubules occur at Z-discs and do not form triads.

  • Intercalated discs connect adjacent cells:

    • Desmosomes hold membranes together during contraction.

    • Gap junctions allow ions to pass between cells, rapidly spreading depolarization so the heart behaves as a coordinated unit.

  • Cardiac muscle resists fatigue due to extensive blood supply and numerous mitochondria.

  • Pericardium:

    • Fibrous pericardium: dense connective tissue sac; anchors and protects heart and prevents overfilling.

    • Serous pericardium:

      • Parietal layer anchors heart to sternum and diaphragm.

      • Visceral layer surrounds heart.

  • Myocardium: contractile layer.

  • Endocardium:

    • Squamous epithelium lining internal structures.

    • Smooth surface reduces friction and helps prevent clot formation.

  • Muscle fiber arrangement coordinates pumping and helps expel maximum blood from atria and ventricles.

  • SA node (pacemaker):

    • Generates impulse and initiates action potentials for synchronized contraction.

  • Bundle and Purkinje fibers:

    • Conduct action potentials through ventricles for synchronized ventricular contraction.

  • Wolff-Parkinson-White syndrome (WPW):

    • Abnormal electrical conduction pathway between atria and ventricles, called the bundle of Kent.

    • Can cause supraventricular tachycardia.

10. SMOOTH MUSCLE

Structure

  • Found in walls of hollow organs, except the heart.

  • Fibers are small, spindle-shaped (fusiform), with one central nucleus.

  • No striations because sarcomeres are absent.

  • No T-tubules.

  • Surrounded by fine connective tissue called endomysium.

  • Gap junctions allow electrical signals to spread between cells for coordinated contraction.

  • Caveolae:

    • Function like T-tubules.

    • Increase surface area for Ca²⁺ transfer into cytoplasm.

  • Myosin-to-actin ratio:

    • Smooth muscle: 1:13.

    • Skeletal muscle: 1:2.

  • Myosin heads bind along the entire length of actin filaments, allowing greater shortening and force over long distances.

  • Thick and thin filaments arranged diagonally, producing a nonstriated appearance.

  • Dense bodies act like Z-discs.

  • Intermediate filaments connect dense bodies and transmit force throughout the cell.

Organization and Function

  • Longitudinal layer:

    • Dilates and shortens.

  • Circular layer:

    • Constricts and lengthens.

  • Peristalsis:

    • Coordinated contractions of these layers create waves that move material through organs.

  • Contraction is slow, sustained, fatigue-resistant, and energy-efficient.

  • Stress relaxation response:

    • Stretch initially triggers contraction, but contraction does not persist as strongly.

    • Allows organs to fill or expand slowly.

  • Can generate tension even when stretched well beyond resting length because it lacks highly organized sarcomeres.

  • Hyperplasia:

    • Increases number of smooth muscle fibers, allowing organs to grow.

  • Smooth muscle cells secrete collagen and elastin that surround them.

11. SKELETAL MUSCLE ORGANIZATION

Skeletal Muscle as an Organ

  • Each skeletal muscle is an organ containing:

    • Muscle fibers.

    • Connective tissue.

    • Blood vessels.

    • Nerves.

  • Connective tissue:

    • Wraps, separates, and holds muscle together.

    • Contributes elastic properties.

    • Transfers force from sarcomeres to the skeletal system.

Connective Tissue Layers

  • Endomysium:

    • Thin areolar connective tissue around each individual muscle fiber.

  • Perimysium:

    • Dense connective tissue around a bundle of fibers called a fascicle.

  • Epimysium:

    • Dense irregular connective tissue around the entire muscle.

  • Deep fascia:

    • Dense connective tissue sheet superficial to epimysium.

    • Organizes muscles into functional compartments and surrounds other structures.

Muscle Fiber Arrangements

  • Parallel:

    • Fascicles run parallel to the muscle's long axis.

    • Allow greater ROM.

    • Example: straplike sartorius.

  • Pennate:

    • Short fibers attach to a tendon.

    • Produce greater force.

    • Unipennate: fibers attach on one side.

    • Bipennate: fibers attach on both sides.

    • Multipennate: fibers attach in multiple directions.

  • Convergent:

    • Broad origin; fascicles converge toward one tendon.

    • Triangular or fan-shaped.

  • Circular:

    • Concentric rings of fascicles.

    • Close openings.

  • Parallel muscles may also be fusiform.

Physiological Cross-Sectional Area (PCSA)

  • PCSA determines force production.

  • Larger PCSA → greater force.

  • Pennate muscles pack more fibers into the same muscle volume.

  • Bipennate muscles have greater PCSA than parallel muscles of equal volume.

  • Pennate muscles generate more force because more fibers attach to the tendon.

  • Parallel muscles:

    • Greater shortening and ROM.

  • Pennate muscles:

    • Less shortening and ROM but greater force.

  • Muscle-tendon length ratio affects ROM:

    • Gastrocnemius and flexor hallucis longus have long tendons and tend to have shorter muscle fibers that shorten less.

  • Muscles with long fibers running bone-to-bone can shorten more and allow greater ROM.

Skeletal Muscle Cell Characteristics

  • Skeletal muscle cells are large and long.

  • Syncytium:

    • Multinucleated fiber formed by fusion of hundreds of embryonic myoblasts.

    • Nuclei lie at the cell periphery.

Levels of Skeletal Muscle Organization

  • Muscle (organ):

    • Contains hundreds to thousands of muscle fibers.

    • Covered by epimysium and supplied by blood vessels and nerve fibers.

  • Fascicle:

    • Bundle of muscle cells.

    • Surrounded by perimysium.

  • Muscle fiber (cell):

    • Elongated, multinucleated, striated cell.

    • Surrounded by endomysium.

  • Myofibril:

    • Rod-like contractile element occupying most of muscle cell volume.

    • Made of sarcomeres arranged end-to-end.

    • A and I bands align across myofibrils to create striations.

  • Sarcomere:

    • Contractile unit between two Z-discs.

    • Composed of myofilaments.

  • Myofilaments:

    • Thick filaments contain myosin.

    • Thin filaments contain actin.

    • Sliding of thin past thick filaments shortens muscle.

  • Elastic filaments:

    • Maintain A-band alignment.

    • Provide elastic recoil after contraction.

12. MYOFIBRILS, SARCOMERES, AND FILAMENTS

Bands and Lines

  • Striations result from alignment of actin and myosin.

  • A band:

    • Dark band.

    • Contains thick filaments.

    • Anisotropic/polarizing.

    • Corresponds to myosin filament length.

  • I band:

    • Light band.

    • Contains thin filaments.

    • Isotropic/nonpolarizing.

    • Actin extends across the I band and into the A band.

  • H zone:

    • Lighter region within A band.

    • Contains only thick filaments; no actin overlap.

  • M line:

    • Center of H zone.

    • Proteins hold thick filaments together.

  • Z line/Z-disc:

    • Anchors thin actin filaments.

    • Defines the boundary of a sarcomere.

  • Sarcomere:

    • Region between two Z-lines.

    • Smallest contractile unit.

  • Filament arrangement:

    • Hexagonal pattern.

    • Each myosin filament is surrounded by six actin filaments.

    • Each actin filament is surrounded by three myosin filaments.

Actin and Myosin

  • Actin:

    • Thin filament.

    • Found in I bands.

    • Contains troponin complex, which binds Ca²⁺, and tropomyosin, which binds along actin.

  • Myosin:

    • Thick filament.

    • Found in A bands.

    • Heads contain ATP-binding and actin-binding sites.

  • Sliding filament theory:

    • Actin slides past myosin, shortening the sarcomere.

    • Filaments themselves do not change length.

13. MUSCLE CONTRACTION

Steps of Contraction

  1. An action potential travels down T-tubules and causes the sarcoplasmic reticulum (SR) to open Ca²⁺ channels.

  2. Ca²⁺ binds to troponin on actin.

  3. Troponin changes shape, moving tropomyosin away from myosin-binding sites on actin.

  4. Myosin heads attach to exposed actin sites, forming cross-bridges.

  5. Power stroke: myosin heads pivot, pull actin, shorten muscle, and release ADP + Pi.

  6. ATP binds to myosin, causing detachment and allowing myosin heads to re-cock.

  7. Without ATP, myosin cannot detach, contributing to rigor mortis.

  8. When stimulation ends, Ca²⁺ is pumped back into the SR.

  9. Ca²⁺ detaches from troponin; tropomyosin covers actin-binding sites again.

  10. Cross-bridge cycling stops and muscle relaxes.

Motor Units

  • Motor unit = one motor neuron and all muscle fibers it innervates.

  • Each muscle receives at least one motor nerve.

  • Motor neuron axon branches inside the muscle and attaches to individual fibers at neuromuscular junctions.

  • Fibers in one motor unit are locally distributed within a subvolume of the muscle.

14. MUSCLE TWITCH AND FORCE GRADING

Fiber Types and All-or-None Principle

  • Soleus: approximately 90% Type I slow-twitch fibers.

  • Extensor digitorum longus (EDL): approximately 80% Type II fast-twitch fibers.

  • All-or-none principle:

    • If a stimulus reaches the critical threshold, all fibers in that motor unit contract.

    • This does not mean the entire muscle contracts as one all-or-none unit.

  • Motor units have different thresholds.

  • Stronger stimulation recruits more fibers and produces greater force.

Three Phases of a Twitch

  • Latent period:

    • Delay between stimulus and force production.

  • Period of contraction:

    • Beginning of force development to peak tension; movement may occur.

  • Period of relaxation:

    • Peak tension to zero tension as Ca²⁺ is removed.

Graded Muscle Responses

  • Allows smooth adjustment between small and large forces according to task demands.

  • Recruitment/spatial summation:

    • Activates more motor units.

    • Increases force.

  • Rate coding/temporal summation:

    • Increases stimulation frequency of the same motor unit.

  • Orderly recruitment:

    • Type I (slow, small) → Type II (fast, large).

    • Lower thresholds → higher thresholds.

  • Stimuli far apart: identical twitches.

  • Stimuli closer together: summation.

  • Unfused tetanus: uneven force plateau.

  • Fused tetanus: smooth, maximal force.

  • These responses depend on the levels of Ca²⁺ released and reclaimed by the SR.

15. TYPES OF MUSCLE CONTRACTIONS

  • Isometric:

    • Tension without a change in muscle length.

  • Isotonic:

    • Muscle changes length while producing tension.

  • Concentric:

    • Muscle shortens while producing tension.

    • Positive work.

  • Eccentric:

    • Muscle lengthens while producing tension.

    • Negative work.

  • Isokinetic:

    • Constant velocity.

16. LENGTH-TENSION RELATIONSHIP

  • Optimal length: approximately 80–120%.

    • Best actin/myosin arrangement.

    • Myosin heads can reach actin-binding sites and form cross-bridges.

  • Greater than optimal length: approximately 180%.

    • Filaments do not overlap.

    • Myosin cannot attach to actin.

    • No force can be produced through cross-bridges.

  • Less than optimal length: approximately 60%.

    • Sarcomeres are compressed.

    • Myosin and Z-discs collide.

    • Actin filaments interfere with one another.

17. FORCE-VELOCITY RELATIONSHIP

  • Higher load → slower shortening velocity.

  • Maximum force occurs at zero velocity during isometric contraction.

  • Maximum velocity occurs at zero load.

  • Concentric contractions:

    • Muscle shortens.

    • Faster shortening speeds mean fewer cross-bridges remain attached, reducing force.

  • Eccentric contractions:

    • Muscle lengthens under tension.

    • Produce higher forces due to increased active cross-bridge binding and passive tension from titin.

18. MOVEMENT ROLES OF MUSCLES

  • Muscles can only pull and therefore work in antagonistic pairs.

  • Agonist:

    • Muscle providing the major force for a movement.

  • Antagonist:

    • Opposes or reverses a movement.

    • Often stretches and relaxes during the agonist's action.

    • May be active to prevent overshooting or to slow/stop movement.

  • Synergist:

    • Assists the agonist or reduces undesirable/unnecessary movement.

  • Conjoint synergists:

    • Two muscles work together to produce a movement neither could produce alone.

  • Neutralizing synergists:

    • Prevent unwanted actions that would otherwise occur when a muscle contracts and produces all movements it is capable of.

  • Stabilizing synergists:

    • Create tension on attached bones to anchor/support a bone and provide a firm base for another muscle to pull against.


FINAL HIGH-YIELD CONNECTIONS

  • Plane ↔ perpendicular axis ↔ movement.

  • Tissue structure ↔ tissue function.

  • Collagen ↔ tensile strength; elastin ↔ stretch and recoil; reticular fibers ↔ supportive framework.

  • Osteoblasts build bone; osteoclasts break down bone; osteocytes maintain bone.

  • PTH increases blood Ca²⁺ through bone breakdown; calcitonin promotes Ca²⁺ deposition in bone.

  • Intramembranous ossification begins with fibrous connective tissue; endochondral ossification begins with hyaline cartilage.

  • Fibrous joints: dense connective tissue; cartilaginous joints: cartilage; synovial joints: joint cavity and synovial fluid.

  • Greater joint mobility often means less stability: shoulder versus hip.

  • Static stretching: slow, controlled holds; ballistic: bouncing; PNF: contraction followed by increased stretch.

  • Cardiac muscle: striated, branched, interconnected, involuntary.

  • Smooth muscle: nonstriated, spindle-shaped, involuntary, slow and fatigue-resistant.

  • Skeletal muscle: striated, voluntary, multinucleated.

  • Endomysium surrounds a fiber; perimysium surrounds a fascicle; epimysium surrounds the whole muscle.

  • Myosin = thick filament; actin = thin filament.

  • Sarcomere = Z-disc to Z-disc.

  • Ca²⁺ exposes actin-binding sites; ATP allows myosin detachment.

  • Recruitment = more motor units; rate coding = faster stimulation of the same motor unit.

  • Concentric = shortening; eccentric = lengthening; isometric = tension without length change.

  • Larger PCSA → greater force; parallel arrangement → greater ROM; pennate arrangement → greater force.

  • Agonist produces the main movement; antagonist opposes it; synergist assists or stabilizes.