Unit 2 Part B Summary: Principles, History, and Production

Radiographic Terminology

  • Radiology: The study of radiation.

  • Radiation: Forms of waves of energy emission through space or material.

  • X-radiation: High-energy, ionizing electromagnetic radiation.

  • Radiographs: Film-based or digitally produced images that record anatomic structures.

  • Radiographer: A trained and certified individual who exposes an anatomical area to ionizing radiation.

History of Dental Radiography

  • Wilhelm Conrad Roentgen: Bavarian physicist who discovered x-rays on November 8, 18951895. He was awarded the first Nobel Prize in physics in 19011901.

  • Historical nomenclature referred to x-rays as roentgen rays, radiology as roentgenology, and radiographs as roentgenographs.

  • Otto Walkhoff: Made the first dental radiograph.

  • Dr. C. Edmund Kells: New Orleans dentist credited with the first practical use of radiographs in dentistry in 18961896.

Posterior Paralleling Technique & Exposure Sequence

  • Sequence Rationale: Always expose the premolar view before the molar view. Premolar placement is easier for the patient to tolerate and less likely to trigger the gag reflex.

  • Placements: A complete posterior series requires 88 receptor placements (44 maxillary and 44 mandibular).

  • Exposure Steps:

    • Maxillary right quadrant: Expose premolar view (teeth 1414 and 1515), then molar view (teeth 1616, 1717, and 1818).

    • Mandibular left quadrant (without reassembling XCP): Expose premolar view (teeth 3434 and 3535), then molar view (teeth 3636, 3737, and 3838).

    • Maxillary left quadrant (reassemble XCP): Expose premolar receptor (teeth 2424 and 2525), then molar receptor (teeth 2626, 2727, and 2828).

    • Mandibular right quadrant: Expose premolar receptor (teeth 4444 and 4545), then molar receptor (teeth 4646, 4747, and 4848).

  • Mandibular Premolar Modification: Place the receptor under the tongue. Soften the lower edge gently to prevent patient discomfort.

Mandibular premolar receptor placement relative to the tongue
  • Advantages of Paralleling Technique:

    • Accuracy: Represents actual tooth dimensions without distortion.

    • Simplicity: Standardizes procedure and eliminates need to calculate vertical/horizontal angulation.

    • Duplication: High validity for serial comparison.

  • Disadvantages of Paralleling Technique:

    • Placement can be difficult for children or patients with small mouths or shallow palates.

    • Holding device may cause discomfort or tissue impingement.

Atomic & Molecular Structure

  • Matter & Energy: Energy is the capacity to do work; matter is anything that occupies space and has form, composed of molecules made of atoms.

  • Nucleus: Dense central core containing positively charged protons and uncharged neutrons. Dental x-rays do not alter the nucleus or make atoms radioactive.

  • Electrons: Negatively charged particles orbiting the nucleus in electron shells, held by electron binding energy.

Ionization & Radiation Physics

  • Photon: A minute bundle of pure energy with no mass or weight.

  • Ionization: Occurs when an x-ray photon collides with an orbiting electron, displacing it from orbit.

  • Ion Pair: Consists of the displaced negative electron (negative ion) and the remaining unstable atom (positive ion).

Process of ionization producing positive and negative ions

Characteristics of X-Rays & Wavelengths

  • Electromagnetic radiation travels in straight lines at the speed of light with a wavelike motion.

  • Short Wavelength / High Frequency: Higher energy and greater penetrating power (used in dental radiography).

  • Long Wavelength / Low Frequency: Lower energy and weak penetrating power.

Comparison of long wavelength low frequency waves and short wavelength high frequency waves
  • Key Properties: Invisible, weightless, uncharged, travels at the speed of light, causes ionization, affects living cells, produces images on photographic film, causes certain substances to fluoresce.

Step-by-Step Production of X-Rays

  • Electric current travels from the wall outlet to the control panel, through the extension arm, and into the step-down transformer in the tubehead.

  • Transformer reduces voltage to 3 to 5 V3\text{ to }5\text{ V} to heat the cathode's tungsten filament, producing thermionic emission (electron cloud).

  • Depressing the exposure button activates the high-voltage circuit, accelerating electrons across the tube.

  • The molybdenum cup focuses electrons toward the tungsten target on the anode.

  • Impact at the tungsten target converts kinetic energy into x-radiation (less than 1%1\%) and heat (99%99\%).

  • Heat is dissipated by the copper stem and absorbed by insulating oil.

  • X-rays pass through the unleaded glass window, tubehead seal, aluminum filter (removes long wavelengths), collimator, and lead-lined PID to exit.

X-ray beam production diagram in tubehead

Primary, Secondary, and Scatter Radiation

  • Primary Radiation: The original useful beam emitted directly from the target of the x-ray tube.

  • Secondary Radiation: Created when the primary beam interacts with matter.

  • Scatter Radiation: A form of secondary radiation resulting from an x-ray beam being deflected from its path by matter interaction.

Primary, secondary, and scatter radiation interaction diagram

Image Density Characteristics

  • Radiolucent: Structures that permit x-ray passage; appear dark or black on radiographs (e.g., air spaces, soft tissue, dental pulp).

  • Radiopaque: Dense structures that absorb x-rays; appear white or light gray on radiographs (e.g., enamel, metal restorations, dense bone).

Comparison of radiolucent and radiopaque structures on radiograph