Atoms, the Periodic Table, and Fundamental Chemical Calculations

Course Logistics and Metric Conversions

  • Math Primer Session Details:

    • In-Person Session: August 26 (8/268/26) from 6:30 PM to 8:30 PM.
    • Virtual Session: September 2 (9/29/2) from 6:30 PM to 8:30 PM.
    • Registration & Practice: Access course section 1311.7011311.701 to register for the in-person session and practice the Math handout.
  • SI Metric Prefixes and Scientific Notation:

    • Tera- (TT): Factor of 1×10121 \times 10^{12} (1,000,000,000,0001,000,000,000,000); Example: 1 teragram (Tg)=1×1012 g1\text{ teragram (Tg)} = 1 \times 10^{12}\text{ g}
    • Giga- (GG): Factor of 1×1091 \times 10^9 (1,000,000,0001,000,000,000); Example: 1 gigawatt (GW)=1×109 W1\text{ gigawatt (GW)} = 1 \times 10^9\text{ W}
    • Mega- (MM): Factor of 1×1061 \times 10^6 (1,000,0001,000,000); Example: 1 megahertz (MHz)=1×106 Hz1\text{ megahertz (MHz)} = 1 \times 10^6\text{ Hz}
    • Kilo- (kk): Factor of 1×1031 \times 10^3 (1,0001,000); Example: 1 kilometer (km)=1×103 m1\text{ kilometer (km)} = 1 \times 10^3\text{ m}
    • Deci- (dd): Factor of 1×10−11 \times 10^{-1} (0.10.1); Example: 1 deciliter (dL)=1×10−1 L1\text{ deciliter (dL)} = 1 \times 10^{-1}\text{ L}
    • Centi- (cc): Factor of 1×10−21 \times 10^{-2} (0.010.01); Example: 1 centimeter (cm)=1×10−2 m1\text{ centimeter (cm)} = 1 \times 10^{-2}\text{ m}
    • Milli- (mm): Factor of 1×10−31 \times 10^{-3} (0.0010.001); Example: 1 millimeter (mm)=1×10−3 m1\text{ millimeter (mm)} = 1 \times 10^{-3}\text{ m}
    • Micro- (μ\mu): Factor of 1×10−61 \times 10^{-6} (0.0000010.000001); Example: 1 microliter (μl)=1×10−6 L1\text{ microliter (}\mu\text{l)} = 1 \times 10^{-6}\text{ L}
    • Nano- (nn): Factor of 1×10−91 \times 10^{-9} (0.0000000010.000000001); Example: 1 nanosecond (ns)=1×10−9 s1\text{ nanosecond (ns)} = 1 \times 10^{-9}\text{ s}
    • Pico- (pp): Factor of 1×10−121 \times 10^{-12} (0.0000000000010.000000000001); Example: 1 picogram (pg)=1×10−12 g1\text{ picogram (pg)} = 1 \times 10^{-12}\text{ g}
  • Volume Equivalences:

    • 1 cm3=1 mL1\text{ cm}^3 = 1\text{ mL}
  • Unit Conversion Practice Problems:

    1. Volume Calculation: Determine the volume in liters for a 39.7 g39.7\text{ g} solution with a density of 1.9 g mL−11.9\text{ g\,mL}^{-1}.         Volume=39.7 g×1 mL1.9 g×1 L1000 mL=0.021 L\text{Volume} = 39.7\text{ g} \times \frac{1\text{ mL}}{1.9\text{ g}} \times \frac{1\text{ L}}{1000\text{ mL}} = 0.021\text{ L}
    2. Exponentiation Problem: Simplify (3×102)3(3 \times 10^2)^3.         (3×102)3=33×(102)3=27×106=2.7×107(3 \times 10^2)^3 = 3^3 \times (10^2)^3 = 27 \times 10^6 = 2.7 \times 10^7
    3. Nanogram to Microgram Conversion: Convert 458 ng458\text{ ng} to μg\mu\text{g}.         458 ng×1×10−9 g1 ng×1 μg1×10−6 g=0.458 μg458\text{ ng} \times \frac{1 \times 10^{-9}\text{ g}}{1\text{ ng}} \times \frac{1\,\mu\text{g}}{1 \times 10^{-6}\text{ g}} = 0.458\,\mu\text{g}
    4. Cubic Centimeter to Cubic Meter Conversion: Convert 75 cm375\text{ cm}^3 to m3\text{m}^3.         75 cm3×(1 m100 cm)3=75×10−6 m3=7.5×10−5 m375\text{ cm}^3 \times \left(\frac{1\text{ m}}{100\text{ cm}}\right)^3 = 75 \times 10^{-6}\text{ m}^3 = 7.5 \times 10^{-5}\text{ m}^3

Fundamental Concepts of Atoms and Molecules

  • Atoms:

    • An atom is the basic building block of matter.
    • It represents the smallest unit of matter that retains all the unique chemical properties of an element.
    • Analogy: A DVD collection can be divided into smaller numbers until a single DVD remains. Further division of that single DVD destroys its function and identity as a DVD. Similarly, matter can be subdivided until a single atom remains; dividing it further yields components that no longer possess the properties of that element.
  • Molecules:

    • A molecule consists of a group of two or more atoms held together in specific geometric patterns and fixed chemical proportions.

Historical Development of Atomic Theory

  • Democritus (5th Century B.C.):

    • Greek philosopher who was among the first to hypothesize that all matter consists of tiny, indivisible particles.
    • Termed these particles atomos, meaning "uncuttable" or "indivisible".
  • Dalton's Atomic Theory (1808):

    • Introduced by English chemist John Dalton; established five fundamental principles of modern chemical theory:
      1. Matter is composed of extremely small, indivisible particles called atoms.
      2. All atoms of a given element are identical in mass, size, and chemical properties.
      3. Atoms of different elements differ in mass, chemical behavior, and physical properties.
      4. Chemical compounds are formed when atoms of more than one element combine in fixed, definite whole-number ratios.
      5. Atoms are indestructible and unchangeable in chemical reactions; atoms of one element cannot be transformed into atoms of another element during chemical processes. Chemical reactions involve only the separation, combination, or rearrangement of intact atoms.

Discovery and Characterization of Subatomic Particles

  • Discovery of the Electron (J.J. Thomson):

    • Experimented with cathode ray tubes and established that cathode rays consist of a stream of negatively charged particles termed electrons (e−e^-).
    • Deflected cathode rays using electric fields to determine the charge-to-mass ratio of the electron:         Charge-to-mass ratio=−1.76×108 C g−1\text{Charge-to-mass ratio} = -1.76 \times 10^8\text{ C\,g}^{-1}
    • Proposed the Plum Pudding Model (or raisin cookie model) of atomic structure:
      • An atom is a sphere of uniform positive charge.
      • Negatively charged electrons are embedded throughout this positive sphere, akin to raisins or plums in a pudding.
  • Determination of Electron Charge and Mass (R.A. Millikan):

    • Conducted the Oil Drop Experiment (1868–1953) analyzing the motion of electrically charged oil drops in an electric field.
    • Determined the explicit charge of an electron:         Charge of e−=−1.6022×10−19 C\text{Charge of } e^- = -1.6022 \times 10^{-19}\text{ C}
    • Utilized Thomson's charge-to-mass ratio to calculate the mass of an electron:         Mass of e−=−1.6022×10−19 C−1.76×108 C g−1=9.10×10−28 g\text{Mass of } e^- = \frac{-1.6022 \times 10^{-19}\text{ C}}{-1.76 \times 10^8\text{ C\,g}^{-1}} = 9.10 \times 10^{-28}\text{ g}
  • Discovery of the Atomic Nucleus and Proton (Ernest Rutherford):

    • Conducted the Gold Foil Experiment, disproving the Plum Pudding Model and introducing the Nuclear Model of the Atom.
    • Key components of the Nuclear Model:
      • All positive charge is concentrated in a tiny central core called the nucleus.
      • The nucleus is extremely dense and contains virtually all of the atom's mass.
      • The nucleus occupies a negligible fraction of the atom's total volume. The atomic radius is approximately 10,00010,000 times larger than the radius of the nucleus:             Radiusatom≈10,000×Radiusnucleus\text{Radius}_{\text{atom}} \approx 10,000 \times \text{Radius}_{\text{nucleus}}
      • Most of the atom consists of empty space through which electrons are distributed.
    • Rutherford's research team subsequently confirmed the existence, mass, and positive charge of the proton.
  • Discovery of the Neutron (James Chadwick, 1932):

    • Bombarded a sheet of Beryllium with high-energy α\alpha (alpha) particles.
    • Observed the emission of neutral, highly penetrating radiation consisting of a third subatomic particle: the neutron.
    • Properties of Neutrons:
      • Electrically neutral (zero charge).
      • Reside inside the nucleus along with protons.
      • Possess a mass slightly greater than that of a proton.
      • Together with protons, neutrons account for nearly all the atomic mass.
  • Quantitative Summary of Subatomic Particles:

    • Electron (e−e^-):
      • Mass: 9.10938×10−28 g9.10938 \times 10^{-28}\text{ g} (5.4858×10−4 amu5.4858 \times 10^{-4}\text{ amu})
      • Charge: −1.6022×10−19 C-1.6022 \times 10^{-19}\text{ C}
      • Relative Charge Unit: −1-1
      • Location: Distributed outside the nucleus in electron clouds
    • Proton (p+p^+):
      • Mass: 1.67262×10−24 g1.67262 \times 10^{-24}\text{ g} (1.0073 amu1.0073\text{ amu})
      • Charge: +1.6022×10−19 C+1.6022 \times 10^{-19}\text{ C}
      • Relative Charge Unit: +1+1
      • Location: Concentrated inside the nucleus
    • Neutron (n0n^0):
      • Mass: 1.67493×10−24 g1.67493 \times 10^{-24}\text{ g} (1.0086 amu1.0086\text{ amu})
      • Charge: 0 C0\text{ C}
      • Relative Charge Unit: 00
      • Location: Concentrated inside the nucleus

Atomic Number, Mass Number, and Isotopes

  • Atomic Number (ZZ):

    • Equal to the number of protons in the nucleus of an atom.
    • In a neutral atom, the number of protons equals the number of electrons:         Number of Protons=Number of Electrons\text{Number of Protons} = \text{Number of Electrons}
    • ZZ is unique to each element and defines its chemical identity. For instance, if Z=7Z = 7, the element is Nitrogen; every Nitrogen atom has exactly 77 protons.
    • Appears above the element symbol on the periodic table.
  • Mass Number (AA):

    • Equal to the total sum of protons and neutrons in the nucleus:         A=protons+neutronsA = \text{protons} + \text{neutrons}
    • Protons and neutrons are collectively designated as nucleons.
    • Number of neutrons is determined via:         Number of Neutrons=A−Z\text{Number of Neutrons} = A - Z
  • Isotopes:

    • Atoms of the same element containing the same atomic number (ZZ) but different mass numbers (AA) due to varying numbers of neutrons.
    • The existence of isotopes invalidates Dalton's postulate that all atoms of a given element are identical in mass.
    • Isotopes of an element exhibit nearly identical chemical properties (reactivity and compound formation) because chemical properties depend on electron structure.
    • Isotopic Notation Methods:
      1. Chemical Symbol Notation: ZAX_Z^A\text{X} (e.g., 13H_1^3\text{H})
      2. Name-Hyphenated Mass Notation: Element Name - A\text{Element Name - } A (e.g., Hydrogen-3\text{Hydrogen-3} or Carbon-14\text{Carbon-14})
  • Isotope Worked Examples:

    • Worked Example 2.1: Determine protons, neutrons, and electrons:
      • (a) Chlorine-35 (1735Cl_{17}^{35}\text{Cl}): Z=17→17 protons,17 electronsZ = 17 \rightarrow 17\text{ protons}, 17\text{ electrons}; A=35→35−17=18 neutronsA = 35 \rightarrow 35 - 17 = 18\text{ neutrons}.
      • (b) Chlorine-37 (37Cl^{37}\text{Cl}): Z=17→17 protons,17 electronsZ = 17 \rightarrow 17\text{ protons}, 17\text{ electrons}; A=37→37−17=20 neutronsA = 37 \rightarrow 37 - 17 = 20\text{ neutrons}.
      • (c) Potassium-41 (41K^{41}\text{K}): Z=19→19 protons,19 electronsZ = 19 \rightarrow 19\text{ protons}, 19\text{ electrons}; A=41→41−19=22 neutronsA = 41 \rightarrow 41 - 19 = 22\text{ neutrons}.
      • (d) Carbon-14 (14C^{14}\text{C}): Z=6→6 protons,6 electronsZ = 6 \rightarrow 6\text{ protons}, 6\text{ electrons}; A=14→14−6=8 neutronsA = 14 \rightarrow 14 - 6 = 8\text{ neutrons}.
    • Practice Problem I: An element XX has 36 neutrons36\text{ neutrons} and 30 electrons30\text{ electrons}.
      • Since the atom is neutral, protons=30\text{protons} = 30, meaning Z=30Z = 30 (Zinc, Zn\text{Zn}).
      • Mass number A=30+36=66A = 30 + 36 = 66
      • Symbol representation: 3066Zn_{30}^{66}\text{Zn}

Atomic Mass and Mass Spectrometry

  • Atomic Mass Unit (amu):

    • Defined as exactly 112\frac{1}{12} the mass of one Carbon-12 (12C^{12}\text{C}) atom.
    • Mass of one Carbon-12 atom = 12 amu12\text{ amu} (exact standard).
    • Mass conversion: 1 amu=1.66054×10−24 g1\text{ amu} = 1.66054 \times 10^{-24}\text{ g}
  • Average Atomic Mass:

    • The atomic mass listed under an element on the periodic table is a weighted average of all naturally occurring isotopes of that element.
    • Average Atomic Mass=∑(Fractional Abundancei×Isotopic Massi)\text{Average Atomic Mass} = \sum \left(\text{Fractional Abundance}_i \times \text{Isotopic Mass}_i\right)
    • The calculated average atomic mass is always closest to the mass of the most abundant isotope.
    • Carbon Example:
      • 12C^{12}\text{C}: Isotopic mass = 12.00000 amu12.00000\text{ amu}; Percent abundance = 98.93%98.93\% (Fractional = 0.98930.9893)
      • 13C^{13}\text{C}: Isotopic mass = 13.003355 amu13.003355\text{ amu}; Percent abundance = 1.07%1.07\% (Fractional = 0.01070.0107)
      • Average Mass=(0.9893)(12.00000 amu)+(0.0107)(13.003355 amu)=12.01 amu\text{Average Mass} = (0.9893)(12.00000\text{ amu}) + (0.0107)(13.003355\text{ amu}) = 12.01\text{ amu}
    • Worked Example 2.2 (Oxygen): Calculate average atomic mass of Oxygen given three stable isotopes:
      • 816O_8^{16}\text{O}: Mass = 15.9949 amu15.9949\text{ amu}, Abundance = 99.757%99.757\% (0.997570.99757) \rightarrow Contribution = 15.9560 amu15.9560\text{ amu}
      • 817O_8^{17}\text{O}: Mass = 16.9991 amu16.9991\text{ amu}, Abundance = 0.038%0.038\% (0.000380.00038) \rightarrow Contribution = 0.0064 amu0.0064\text{ amu}
      • 818O_8^{18}\text{O}: Mass = 17.9992 amu17.9992\text{ amu}, Abundance = 0.205%0.205\% (0.002050.00205) \rightarrow Contribution = 0.0370 amu0.0370\text{ amu}
      • Average Atomic Mass=15.9560+0.0064+0.0370=15.9994 amu\text{Average Atomic Mass} = 15.9560 + 0.0064 + 0.0370 = 15.9994\text{ amu} (16.00 amu16.00\text{ amu} on periodic table).
    • Practice Problem II (Nitrogen Percent Abundance):
      • Given: Average atomic mass = 14.0067 amu14.0067\text{ amu}. Isotope masses: 14N=14.003074 amu^{14}\text{N} = 14.003074\text{ amu}, 15N=15.000109 amu^{15}\text{N} = 15.000109\text{ amu}.
      • Let xx = fractional abundance of 14N^{14}\text{N}, and (1−x)(1 - x) = fractional abundance of 15N^{15}\text{N}.
      • 14.003074(x)+15.000109(1−x)=14.006714.003074(x) + 15.000109(1 - x) = 14.0067
      • 14.003074x+15.000109−15.000109x=14.006714.003074x + 15.000109 - 15.000109x = 14.0067
      • −0.997035x=−0.093409→x≈0.996362-0.997035x = -0.093409 \rightarrow x \approx 0.996362
      • Abundances (to 4 sig figs): 14N=99.64%^{14}\text{N} = 99.64\%, 15N=0.3638%^{15}\text{N} = 0.3638\%
  • Mass Spectrometry:

    • The most direct and accurate experimental method for measuring atomic masses and isotopic abundances.
    • A mass spectrometer generates a mass spectrum showing mass-to-charge ratios and percent abundances of isotopes (e.g., Neon mass spectrum).

Periodic Table Organization and Chemical Classifications

  • Structural Layout:

    • Organized in order of increasing atomic number (ZZ).
    • Periods: Horizontal rows (11 through 77).
    • Groups (Families): Vertical columns (11 to 1818 or 1A1\text{A} to 8A8\text{A}). Elements within a group share similar physical and chemical properties.
  • Broad Elemental Categories:

    • Metals: Located on the left side of the stair-step line.
      • Properties: Good conductors of heat and electricity, shiny, malleable, ductile.
    • Nonmetals: Located on the right side of the periodic table.
      • Properties: Poor conductors of heat and electricity, brittle, non-shiny.
    • Metalloids (Semimetals): Located directly along the stair-step line.
      • Properties: Intermediate properties between metals and nonmetals; critical components in the semiconductor industry.
  • Specific Group Classifications:

    • Main Group Elements (Representative Elements): Groups 1A1\text{A} through 8A8\text{A} (Groups 1, 2, 13–18).
    • Transition Elements: Groups 3 through 11 (Groups 3B3\text{B} to 1B1\text{B}).
    • Inner Transition Elements: Lanthanides and Actinides.
    • Group 1A (Alkali Metals): Li,Na,K,Rb,Cs,Fr\text{Li}, \text{Na}, \text{K}, \text{Rb}, \text{Cs}, \text{Fr}. Form alkaline (basic) solutions when reacting with water.
    • Group 2A (Alkaline Earth Metals): Be,Mg,Ca,Sr,Ba,Ra\text{Be}, \text{Mg}, \text{Ca}, \text{Sr}, \text{Ba}, \text{Ra}. Abundantly found in mineral deposits in the earth's crust.
    • Group 6A (Chalcogens): O,S,Se,Te,Po\text{O}, \text{S}, \text{Se}, \text{Te}, \text{Po}.
    • Group 7A (Halogens): F,Cl,Br,I,At\text{F}, \text{Cl}, \text{Br}, \text{I}, \text{At}. Highly reactive nonmetals.
    • Group 8A (Noble Gases): He,Ne,Ar,Kr,Xe,Rn\text{He}, \text{Ne}, \text{Ar}, \text{Kr}, \text{Xe}, \text{Rn}. Inert and extremely unreactive monoatomic gases.

The Mole Concept and Molar Mass Calculations

  • The Mole (mol\text{mol}):

    • The fundamental SI unit used in chemistry to measure the amount of a substance on a macroscopic scale.
    • 1 mole=6.022×1023 entities1\text{ mole} = 6.022 \times 10^{23}\text{ entities} (Avogadro's number, NAN_A).
    • Avogadro's number represents the exact number of atoms in 12 g12\text{ g} of Carbon-12 (12C^{12}\text{C}):         12 g 12C=1 mole 12C=6.022×1023 atoms 12C12\text{ g } ^{12}\text{C} = 1\text{ mole } ^{12}\text{C} = 6.022 \times 10^{23}\text{ atoms } ^{12}\text{C}
    • Examples of 1 Mole:
      • 1 mol Al=6.022×1023 atoms Al=26.98 g Al1\text{ mol Al} = 6.022 \times 10^{23}\text{ atoms Al} = 26.98\text{ g Al}
      • 1 mol He=6.022×1023 atoms He=4.003 g He1\text{ mol He} = 6.022 \times 10^{23}\text{ atoms He} = 4.003\text{ g He}
      • 1 mol Cu=6.022×1023 atoms Cu=63.55 g Cu1\text{ mol Cu} = 6.022 \times 10^{23}\text{ atoms Cu} = 63.55\text{ g Cu}
    • Astronomical Analogy: The Milky Way Galaxy has ≈400 billion stars\approx 400\text{ billion stars} (4×10114 \times 10^{11} stars). Converting this to moles:         4×1011 stars×1 mol stars6.022×1023 stars=6.64×10−13 mol stars4 \times 10^{11}\text{ stars} \times \frac{1\text{ mol stars}}{6.022 \times 10^{23}\text{ stars}} = 6.64 \times 10^{-13}\text{ mol stars}
  • Worked Example 2.3:

    • (a) Calculate Ca\text{Ca} atoms in 30.00 moles30.00\text{ moles} of calcium:         30.00 mol Ca×6.022×1023 Ca atoms1 mol Ca=1.807×1025 Ca atoms30.00\text{ mol Ca} \times \frac{6.022 \times 10^{23}\text{ Ca atoms}}{1\text{ mol Ca}} = 1.807 \times 10^{25}\text{ Ca atoms}
    • (b) Calculate moles of Ca\text{Ca} in 1.00×1020 Ca atoms1.00 \times 10^{20}\text{ Ca atoms}:         1.00×1020 Ca atoms×1 mol Ca6.022×1023 Ca atoms=1.66×10−4 mol Ca1.00 \times 10^{20}\text{ Ca atoms} \times \frac{1\text{ mol Ca}}{6.022 \times 10^{23}\text{ Ca atoms}} = 1.66 \times 10^{-4}\text{ mol Ca}
  • Molar Mass (g mol−1\text{g\,mol}^{-1}):

    • The mass in grams of one mole of a substance.
    • The molar mass of an element in g mol−1\text{g\,mol}^{-1} is numerically identical to its average atomic mass in amu\text{amu}.
    • Sodium (Na): Atomic mass = 22.99 amu22.99\text{ amu} \rightarrow Molar mass = 22.99 g mol−122.99\text{ g\,mol}^{-1}.
    • Phosphorus (P): Atomic mass = 30.97 amu30.97\text{ amu} \rightarrow Molar mass = 30.97 g mol−130.97\text{ g\,mol}^{-1}.
  • Worked Example 2.4:

    • (a) Moles of Carbon in 25.00 g C25.00\text{ g C} (Molar mass = 12.01 g mol−112.01\text{ g\,mol}^{-1}):         25.00 g C×1 mol C12.01 g C=2.082 mol C25.00\text{ g C} \times \frac{1\text{ mol C}}{12.01\text{ g C}} = 2.082\text{ mol C}
    • (b) Moles of Helium in 10.50 g He10.50\text{ g He} (Molar mass = 4.003 g mol−14.003\text{ g\,mol}^{-1}):         10.50 g He×1 mol He4.003 g He=2.623 mol He10.50\text{ g He} \times \frac{1\text{ mol He}}{4.003\text{ g He}} = 2.623\text{ mol He}
    • (c) Moles of Sodium in 15.75 g Na15.75\text{ g Na} (Molar mass = 22.99 g mol−122.99\text{ g\,mol}^{-1}):         15.75 g Na×1 mol Na22.99 g Na=0.6851 mol Na15.75\text{ g Na} \times \frac{1\text{ mol Na}}{22.99\text{ g Na}} = 0.6851\text{ mol Na}
  • Interconverting Mass, Moles, and Atomic Count:

    • Conversion Pathways: Molar mass converts between mass (grams) and moles. Avogadro's number (NAN_A) converts between moles and number of atoms.
  • Worked Example 2.5:

    • (a) Number of Carbon atoms in 0.515 g C0.515\text{ g C}:         0.515 g C×1 mol C12.01 g C×6.022×1023 C atoms1 mol C=2.58×1022 C atoms0.515\text{ g C} \times \frac{1\text{ mol C}}{12.01\text{ g C}} \times \frac{6.022 \times 10^{23}\text{ C atoms}}{1\text{ mol C}} = 2.58 \times 10^{22}\text{ C atoms}
    • (b) Mass of Helium containing 6.89×1018 He atoms6.89 \times 10^{18}\text{ He atoms}:         6.89×1018 He atoms×1 mol He6.022×1023 He atoms×4.003 g He1 mol He=4.58×10−5 g He6.89 \times 10^{18}\text{ He atoms} \times \frac{1\text{ mol He}}{6.022 \times 10^{23}\text{ He atoms}} \times \frac{4.003\text{ g He}}{1\text{ mol He}} = 4.58 \times 10^{-5}\text{ g He}
  • Additional Practice Calculations:

    • Calculate moles of Silicon in 4.60 g Si4.60\text{ g Si} (Molar mass = 28.09 g mol−128.09\text{ g\,mol}^{-1}):         4.60 g Si×1 mol Si28.09 g Si=0.164 mol Si4.60\text{ g Si} \times \frac{1\text{ mol Si}}{28.09\text{ g Si}} = 0.164\text{ mol Si}
    • Calculate number of atoms in 1.00×10−9 g Pb1.00 \times 10^{-9}\text{ g Pb} (Molar mass = 207.2 g mol−1207.2\text{ g\,mol}^{-1}):         1.00×10−9 g Pb×1 mol Pb207.2 g Pb×6.022×1023 Pb atoms1 mol Pb=2.91×1012 Pb atoms1.00 \times 10^{-9}\text{ g Pb} \times \frac{1\text{ mol Pb}}{207.2\text{ g Pb}} \times \frac{6.022 \times 10^{23}\text{ Pb atoms}}{1\text{ mol Pb}} = 2.91 \times 10^{12}\text{ Pb atoms}