Microeconomics - Chapter 1

  • Okay. Well, the appendix to. Chapter one.

    0:05

  • We're going to talk about some fundamental mathematical concepts that we're going to use in this course.

    0:09

  • Okay. First of all, is the as well as some terminology first.

    0:17

  • First of all, is the. Definition of three kinds of relationship between two variables.

    0:22

  • They could be a direct relationship, inverse relationship or independent relationship.

    0:29

  • Or in this course, direct relationship means that the two variable change in the same direction

    0:37

  • inverse relationship means the two variables change in opposite directions.

    0:44

  • An independent relationship means there is no correlation how the two variables are going to change over time.

    0:49

  • So we can also. Use a simple algebra high school algebra to talk about these three kinds of relationship.

    1:00

  • But before that, we also need to talk about the definition of a slope.

    1:14

  • Of course, everybody should should know this, but we're going to refresh your memory.

    1:19

  • All right. So this is the Y axis. This is the x axis.

    1:25

  • And the slope, of course, is the change. Your Y will be the change in the X and delta.

    1:29

  • Here is the change in change in Y over the change in x, which is a slope.

    1:35

  • So for direct relationship. All right.

    1:43

  • Direct relationship. An example could be y equal to two plus x.

    1:48

  • Okay, so y is here and by convention x is here and two will be the intercept.

    1:54

  • How much is the slope? Change a world change. Your x is positive one.

    2:03

  • Okay. All right, so this is simple.

    2:07

  • Has high school algebra, but. Our test here is to integrate is into the integrate the economic concept into

    2:11

  • this example order integration between the algebra and the economics also.

    2:21

  • Okay, so it increases X increases Y is going to increase.

    2:27

  • Right. And is going to look like this. Okay.

    2:33

  • If X decreases this X's as y, X decreases Y is going to decrease.

    2:37

  • Okay. All right. And what we call this we call this in economics or this movement.

    2:45

  • Okay. When is going up like this? This is an upward movement.

    2:52

  • When he's going down like this. This is called downward movement.

    2:58

  • Make sure you understand that the economy will use move and shift differently and we'll come back and talk about a shift later on.

    3:02

  • Okay. All right. All right. And then with the inverse relationship and we can use another example.

    3:12

  • So Y equals ten minus X, and that means Y is here.

    3:23

  • Is here. What's the intercept will be ten here.

    3:30

  • What will be the intercept On the other side. On this side.

    3:34

  • The intercept is also ten. How much is slope one.

    3:37

  • Okay. Right. So when X increases, what's going to happen?

    3:42

  • X increases. Why is going to decrease, Right.

    3:48

  • So what does it look like? Is going to look like this? Right.

    3:51

  • And the other way around, if X decreases, Y is going to increase.

    3:56

  • Okay. All right. And in this case, how do we describe this?

    4:01

  • With this verse, what is it called, Morgan?

    4:07

  • How do we describe the Morgan or the other for the first one?

    4:11

  • X increases Y is going to decrease. We call this a downward movement.

    4:14

  • Pay attention to the wording. Move it forward. Move it the other way around.

    4:19

  • Well, X decreases. Y is going to increase.

    4:24

  • This is the upward movement, not shift.

    4:28

  • Okay. All right. And. All right.

    4:32

  • So. Or.

    4:39

  • The right to a relationship. I'm sorry.

    4:45

  • Let me go to the number three and then phone number three.

    4:48

  • Independent relationship. Okay, Here we have two examples.

    4:52

  • Y equal to two or x equals two.

    4:57

  • Okay. If. Why equal the two?

    5:01

  • This is why this is x is equal to x.

    5:06

  • That means Y equals 2 to 1 X is zero Y because two when x is infinity, y y equals two to x and next infinity.

    5:13

  • This means there is no color correlation between X and Y because one event doesn't change.

    5:28

  • Okay. Which is why. Right. So why doesn't change.

    5:34

  • And in this textbook, this is called independent relationship between X and Y because one event doesn't change.

    5:38

  • Okay. All right. And then one more thing about this is the slope.

    5:46

  • We just say the slope is changing Y. We're changing X. Okay.

    5:51

  • Since Y doesn't change, the change in Y will be zero.

    5:55

  • So the slope is also going to be zero.

    5:59

  • All right. Okay. And.

    6:04

  • And this relationship has to be a straight line the other way around.

    6:08

  • All right. For. X equal to two example.

    6:15

  • This is why this is X. So we put the two.

    6:21

  • Okay. So this time x is always two, regardless of the values of Y.

    6:25

  • So X or Y will have an inverse relationship.

    6:31

  • Okay. I'm sorry. Independent relationship.

    6:35

  • How much is the slope? Okay. This time is change.

    6:38

  • Change your y over the change in x. This time to change an x equal to zero because explicit x is always two.

    6:42

  • So you need to say this is infinity, not undefined.

    6:52

  • Let me say this again. This is important. Some students tend to tell me, Professor, this is not quite okay.

    6:58

  • There are a lot of things undefined in the world in terms of mathematical, simple.

    7:07

  • What we talk about, the slope in this case slope of a straight line should be infinity is not until five is undefined, but we need to call it.

    7:15

  • Is certainty. All right. UFO is undefined, but.

    7:27

  • But we called it up all day. In many religions, God is undefined, but it doesn't prevent us from characterizing it.

    7:34

  • Okay, so here is exactly the same sense in which we are talking about a slope is not

    7:44

  • undefined is you want to characterize the undefined and we call it infinity.

    7:51

  • Okay. That's the way to do it here. All right. Okay.

    7:57

  • So. Going back to the point I was making for.

    8:01

  • The right. An inverse relationship.

    8:11

  • They don't have to be straight lines, but for independent relationship they have to be straight lines either as vertical always, or horizontal.

    8:16

  • Okay. When is horizontal? The slope is zero.

    8:27

  • When is vertical? The slope is infinity. Okay.

    8:32

  • Not undefined. Okay. All right. Now, for the other two kinds of relationship, direct or interrelation, they don't have to be straight lines.

    8:36

  • Okay. That means the slope does not have to be constant.

    8:46

  • So you could be like the following. For example, inverse relationship.

    8:51

  • That is not linear. It doesn't have a constant slope. Right.

    8:56

  • And we call this a concave function.

    9:00

  • All right. The other way around, it could be like.

    9:03

  • Like this that a slope is not constant either.

    9:07

  • We call this a convex function. All right.

    9:10

  • And usually when we talk about the county function, we could the original definition is to pick two points connected to two points.

    9:14

  • And this segment is below the original curve. We call this the concave function.

    9:28

  • All right. You also could be the client with calculus.

    9:34

  • That means the second derivative is negative.

    9:39

  • Okay. All right. And then. Full convex function for the original definition.

    9:44

  • You pick the two points, you connect the two points, and the segment is above the original curve.

    9:52

  • We call this the concept function. Okay. All right.

    9:59

  • And. We will also use to find this was the calculus and that intersection to agree with him is positive.

    10:03

  • Okay. All right. So if the function is differentiable.

    10:14

  • All right. Okay. Now for the direct relationship.

    10:18

  • The right relationship if it is. The slope is the constant, right?

    10:25

  • If it is going up mean it is increasing at the increase in speed, increase at the increases speed because this is a conflict.

    10:32

  • Come back. Function okay. Connect them.

    10:43

  • Is above the original curve. All right. The other one is increasing at the decreasing rate.

    10:46

  • That is. It's going up.

    10:57

  • If you remember, we've seen this growth in chapter one. Okay.

    11:01

  • All right. So you you once again, you collect the two two points and then the segments below the original curve.

    11:04

  • We call this a count concave function.

    11:13

  • And mathematically, it's a function to power ratio.

    11:17

  • That means the second derivative is negative.

    11:21

  • Okay. And for the previous one, the convex function is means the second derivative is.

    11:25

  • Austin. Okay. All right. And also, when we talk about the slope of.

    11:34

  • We talk about. A.

    11:45

  • Direct relationship. It doesn't have to be linear or.

    11:50

  • That means slope doesn't have to be constant.

    11:55

  • So as long as the slope is positive, we can say that two variables have a direct relationship mathematically or reducing calculus.

    11:59

  • That means the first derivative is positive.

    12:12

  • Okay. Now for inference relationship, once again, the slope doesn't have to be constant.

    12:15

  • Okay, so as as the slope is negative, we say the two variables have an inverse relationship.

    12:25

  • And mathematically, with calculus, this means the second derivative is positive.

    12:34

  • Okay, so then there is a positive. Positive. All right, So that is how we can go one step further.

    12:42

  • So talk talk about this. All right. For the first two relationship, they don't have to be straight lines.

    12:52

  • They don't have to have a constant slope. Okay.

    12:59

  • So as the slope is positive, the two are blessed.

    13:04

  • But the relationship. If the slope is negative, but the first approved is that they have not inverse, do not have to be straight line.

    13:07

  • But for the third one, which is the independent relationship, the slope has to be either zero or infinity.

    13:16

  • Okay. So.

    13:26

  • But for the curve. That is not straight. All right.

    13:32

  • How do you find the slope? Okay, So there's a straightforward way here is graphically.

    13:35

  • Way to find this slope, which is quite a straight line tangent to the curve For this airport.

    13:46

  • To rate your relationship like this, you will find a straight line which is a green one.

    13:53

  • Tangent to the curve. At this point, the slope of the straight line will be called the slope of the curve.

    13:58

  • At this point is tangent signaling and for inverse relationship in a similar way.

    14:05

  • Okay. You'll find a straight line tension to curb this tension.

    14:13

  • So point at this tension point, the slope of the straight line is equal to the slope of the curve at that point.

    14:19

  • All right. And finally, there is one implication for a concave.

    14:27

  • Function. Okay. This is about the maximization of a function.

    14:36

  • Maximization. Okay, so suppose the curve looks like this.

    14:43

  • Eventually it goes down. Right. How do you find the maximum?

    14:48

  • All right. I also have another lecture notes about this.

    14:55

  • You can take a look at it in the announcement. Okay.

    14:59

  • So how do you find the placement of a of a function? Well, number one, you take the slope, which is where this is differentiable.

    15:03

  • The first subgroup, which is equal to zero, because the slope at this at this point will be equal to zero.

    15:14

  • What we talk about and of course, you apply the that's at start.

    15:23

  • Okay. Once you applied to start your plug it back to the function and you will get a maximum apply here.

    15:29

  • Maximum the way you. Okay. All right. But then you need a sufficient condition.

    15:39

  • How do you know this is a maximum, not a minimum.

    15:45

  • You need to go for the second derivative, which needs to be negative to make it a concave function.

    15:49

  • All right. And that's it is The first one is as necessary condition is this is a sufficient partition to find a maximum of a function.

    15:57

  • Okay. Otherwise, the first one is not enough because for a minimum.

    16:07

  • At a minimum point. The slope is also zero, but this is a convex function, meaning the second derivative is positive.

    16:14

  • Okay, so to find a maximum, you need to know we need to take the first derivative of the function,

    16:25

  • assuming it is differentiable, and then find the x star and put it back to the function.

    16:33

  • You will get a maximum of the function,

    16:39

  • but the sufficient condition is that the second temperature must be negative, which make it a concrete function.

    16:41

  • That's why the maxima, if it is a convex function, then is a minimal.

    16:50

  • Okay, that's it for this chapter.

    16:55

  • Therefore, this part of the appendix adds up to one.



Microeconomics Study Guide

This guide covers key concepts for your microeconomics class, focusing on scarce resources, economic models, essential formulas and graphs, comparative advantage, trade-offs, and the fundamentals of demand, supply, and equilibrium.

Scarce Resources

  • Definition: In microeconomics, scarcity refers to the idea that resources (land, labor, capital, entrepreneurship) are limited, forcing societies to make choices about allocation.

  • Types:

    • Absolute Scarcity: Physical limitations of resources (e.g., limited oil reserves).

    • Relative Scarcity: The value we place on resources makes them scarce even if abundance exists (e.g., diamonds).

  • Why Important: Scarcity is the foundational problem in economics—because resources are finite, every choice has a cost (opportunity cost).

  • Allocation: Prices, taxes, subsidies, and regulation help allocate scarce resources.

  • Key Concept:

    • Opportunity Cost: The value of the next best alternative given up when a choice is made.

Introduction to Microeconomics

  • Focus: Microeconomics studies how individuals and firms make choices regarding the allocation of limited resources, influencing supply, demand, and price in specific markets (as opposed to macroeconomics, which looks at the economy as a whole).

  • Goal: Analyze how rational actors make decisions, respond to incentives, and participate in markets.

Major Economic Models

  • Supply and Demand Model: Illustrates how price and quantity are determined in a market.

  • Production Possibilities Frontier (PPF): Shows trade-offs and opportunity costs when choosing between two goods.

  • Circular Flow Model: Describes the movement of money, goods, and resources between households and firms.

  • Market Structures: Include models for perfect competition, monopoly, oligopoly, and monopolistic competition.

  • Other Models: Game theory, marginal utility, cost functions, elasticity, externalities, and public goods.

Key Graphs

  • Demand Curve: Downward sloping; shows inverse relationship between price and quantity demanded.

  • Supply Curve: Upward sloping; shows direct relationship between price and quantity supplied.

  • Market Equilibrium: Intersection of supply and demand curves where Qd=QsQd=Qs.

  • PPF: Bowed out curve illustrating opportunity cost and efficiency.

  • Shifts: Changes in determinants (income, preferences, technology, etc.) shift curves, affecting equilibrium.

Comparative Advantage

  • Definition: The ability to produce a good at a lower opportunity cost than another entity.

  • Even if one producer has an absolute advantage (more efficient at producing everything), trade is beneficial if both specialize according to comparative advantage.

  • Calculating Comparative Advantage:

    • Compute the opportunity cost of producing goods for each producer.

    • The producer with the lower opportunity cost for a good has the comparative advantage in that good.

  • Gains from Trade: Specialization and trade allow both parties to consume beyond their own production possibilities.

Trade-Offs

  • Definition: A choice where selecting one option requires giving up another.

  • Examples:

    • Work-Leisure Trade-Off: More work means less leisure time.

    • Production Trade-Offs: Producing more of one good means less of another (illustrated by the PPF).

  • Economic Efficiency: Trade-offs signal resource scarcity and force prioritization, driving innovation and accountability in decision-making.

  • Opportunity Cost: The central measure of a trade-off.

Demand, Supply, and Equilibrium

  • Demand: Relationship between price and quantity consumers wish to purchase (downward slope).

  • Supply: Relationship between price and quantity producers wish to sell (upward slope).

  • Equilibrium Price and Quantity: The point where quantity demanded equals quantity supplied.

    • Surplus: Quantity supplied > Quantity demanded, downward price pressure.

    • Shortage: Quantity demanded > Quantity supplied, upward price pressure.

  • Shifts:

    • Increase in demand raises equilibrium price and quantity.

    • Increase in supply lowers equilibrium price but increases quantity.

  • Graphical Representation:

    • Demand and supply curves intersect at equilibrium.

    • Shifts in these curves affect market outcomes.


Here are the essential microeconomics formulas, rewritten in a simpler and clearer form:

Concept

Simplified Formula Explanation

Total Product (Q)

Total output produced

Average Product (AP)

Total output ÷ Number of workers (AP = Q / L)

Marginal Product (MP)

Change in output ÷ Change in workers (MP = ΔQ / ΔL)

Profit

Total Revenue − Total Cost (Profit = TR − TC)

Total Revenue (TR)

Price × Quantity sold (TR = P × Q)

Total Cost (TC)

Total Fixed Cost + Total Variable Cost (TC = TFC + TVC)

Marginal Revenue (MR)

Change in Total Revenue ÷ Change in output (MR = ΔTR / ΔQ)

Marginal Cost (MC)

Change in Total Cost ÷ Change in output (MC = ΔTC / ΔQ)

Elasticity

% Change in Quantity ÷ % Change in Price

Profit Maximization

Marginal Revenue = Marginal Cost (MR = MC)

Breakeven Point

Price = Average Cost (P = AC)

Shutdown Point

Price = Average Variable Cost (P = AVC)

Key Simplifications:

  • Always use total output as QQ, price as PP, and number of workers as LL.

  • Δ (delta) means "change in": for MP, it's change in output per change in labor.

  • For elasticity, use percent changes, for example: Elasticity = (%%ΔQ)/(%%ΔP).


Here is a comprehensive study guide that incorporates all the requested microeconomics and applied concepts for your upcoming class:

1. Production Possibilities Frontier (PPF)

  • Definition: Shows all possible combinations of two goods or services that can be produced with fixed resources and technology, efficiently and fully utilized.

  • Shape: Typically bowed outward, reflecting increasing opportunity costs.

  • Key Concepts: Scarcity, opportunity cost, trade-offs, efficiency vs. inefficiency.

2. Absolute and Comparative Advantage

  • Absolute Advantage: Being able to produce more of a good with the same resources than another entity.

  • Comparative Advantage: Being able to produce a good at a lower opportunity cost than another entity.

    • Gains from trade arise when each specializes in what they have a comparative advantage in.

3. Opportunity Cost and Trade-Offs

  • Opportunity Cost: What you give up when you choose one option over another—the next best alternative.

  • Trade-Offs: Having more of one thing means having less of another due to scarcity.

4. Allocative Efficiency & Marginal Benefit

  • Allocative Efficiency: When resources are distributed so that the value consumers place on the last unit produced (marginal benefit) equals its marginal cost.

  • Marginal Benefit (MB): Additional benefit from consuming one more unit.

  • Marginal Cost (MC): Additional cost from producing one more unit.

    • Efficiency occurs when MB = MC.

5. Circular Flow Model (Income & Expenditures)

  • Description: Visualizes money, goods, and services moving between households (labor, consumption) and firms (wages, goods).

    • Includes government (taxes and spending) and foreign sector (exports, imports) in more advanced models.

6. Price Floors and Ceilings

  • Price Floor: Legal minimum price (e.g., minimum wage); can cause surpluses if set above equilibrium.

  • Price Ceiling: Legal maximum price (e.g., rent control); can cause shortages if set below equilibrium.

7. Taxes

  • Impact: Shift supply or demand curves, create a wedge between what buyers pay and sellers receive, decrease equilibrium quantity, and cause deadweight loss.

  • Tax Incidence: Burden falls on both producers and consumers depending on elasticity.

8. Externalities and Public Goods

  • Externality: When a third party is affected by a transaction (positive or negative).

    • Example: Pollution (negative), vaccines (positive).

  • Public Goods: Non-excludable and non-rival (e.g., national defense); tend to lead to the free-rider problem.

  • Government Role: Correct market failure via regulation, taxation, or provision.

9. Elasticity (Price, Cross, Income)

  • Price Elasticity of Demand: How much quantity demanded changes with price (%ΔQ/%ΔP).

  • Cross Elasticity: How quantity demanded of one good changes as the price of another changes.

  • Income Elasticity: How quantity demanded changes with income.

10. Broader Concepts and Applications

Topic

Key Points

Economics, the Economy & Biosphere

How economic activity impacts and is dependent on natural resources, and sustainability considerations.

Healthcare

Markets may not achieve efficiency due to externalities, public goods aspects, and information asymmetries.

Firms

Goal is profit maximization; face different cost structures and competitive environments.

Stock Market

Where ownership in firms is traded; prices reflect (imperfectly) expected firm performance.

Trade & Comparative Advantage Redux

Enhances living standards by allowing specialization; even nations lacking absolute advantage can benefit.

Consumer Choice & Behavioral Econ

Traditional models: maximize utility. Behavioral: real decisions often deviate from rational predictions.

Production & Costs

Marginal, average, and total costs; economies of scale; short vs. long run.

Perfect Competition

Many firms, identical products, free entry/exit, price takers, efficient in long run.

Monopolistic Competition

Many firms, differentiated products, some pricing power, zero LR profit.

Oligopoly

Few firms, interdependence, potential for collusion, game theory applies.

Game Theory

Analyzes strategic interactions where the outcome depends on choices of all players.

Monopoly + Antitrust Policy

One firm dominates, sets prices above marginal cost, deadweight loss; antitrust laws prevent abuse.