SBC 1101-1102 Guide for Contractors

الدليل الاسترشادي للكود السعودي للمباني السكنية (SBC 1101-1102)

General Information

This document is a guiding manual for contractors regarding the Saudi Building Code (SBC) for residential buildings.

Authorities

Ministry of Municipal and Rural Affairs and Housing: الجهة المختصة is the General Administration for the Saudi Building Code.
Saudi Standards, Metrology and Quality Org. (SASO): الهيئة is the Saudi Standards, Metrology and Quality Org. (SASO).
Saudi Building Code National Committee: اللجنة الوطنية is the Saudi Building Code National Committee.
General Directorate of Civil Defense: المديرية العامة is responsible for safety regulations in industrial, agricultural, commercial, and residential areas.

Definitions

Building Official: مسؤول البناء is the authority responsible for applying and enforcing the code.
Saudi Building Code: كود البناء is the set of requirements, conditions, regulations, and appendices related to building construction to ensure safety and public health.
Requirements: المتطلبات are details of design, execution methods, construction, and standard specifications.
Conditions: الاشتراطات are procedures and controls for building permits and مخططات preparation.
Guide: الدليل is the guiding manual for the Saudi Building Code for residential buildings (SBC 1101-1102).
Building Permit: رخصة البناء is a written permission issued by the municipal authority.
Practice License: رخصة الممارسة is a permit issued by the Saudi Council of Engineers for individuals to practice الدراسات and التصاميم, or التنفيذ or الإشراف, or التفتيش.
Approved Agency: هيئة معتمدة is an accredited official agency responsible for conducting tests or providing التفتيش services, approved by the building official.
Designer: المصمم is the licensed person contracted by the owner to prepare الدراسات and التصاميم according to the Saudi Building Code.
Supervising Designer: المصمم المشرف is the licensed person responsible for supervising the التنفيذ according to the permits and approved المخططات.
Executor (Contractor): المنفذ (المقاول) is the licensed person contracted by the owner to execute the building according to the सऊदी Building Code.
Inspector: المفتش is the person licensed by the Saudi Council of Engineers to perform التفتيش on buildings according to the Saudi Building Code.
Area Map: القرار المساحي is a map showing الجهات الأرض, dimensions, المساحة, الزوايا, elevations of الأرض and الشوارع, and points of الاشتراك مع الأبنية.
التفتيش: التفتيش is monitoring by a registered professional engineer with relevant qualifications and experience.
Supervision Reports: تقارير الإشراف are reports prepared by the جهة الإشراف on the conformity of the executed الأعمال to the approved المخططات for the building permit.
Occupancy Certificate: شهادة الإشغال is permission to occupy the building issued by the municipal authority after confirming compliance with the code.
Technical Report: التقرير الفني is a document describing the structural condition of the building or the extent of its conformity to building regulations, prepared by مراقب (الأمانة/البلدية) or the المكتﺐ الهندسي.
Balady Platform: منصة بلدي is the national platform for municipal services, offering electronic services for license applications.
التفتيش Authority: جهة التفتيش is a >>third party<< approved by SASO and licensed to perform التفتيش أعمال وفق مجالات in the Saudi Building Code.
المفتﺶ الخاص: المفتش الخاص is a licensed person contracted by the owner to perform private التفتيش أعمال.
Final التفتيش Report: تقرير التفتيش النهائي is a report on the التفتيش أعمال conducted by الجهات ذات العالقة after the completion of the building أعمال.
Insurance Document: وثيقة التأمين is the insurance document covering hidden defects.
Hidden Defect: العيب الخفي is any defect in the building that weakens its strength, stability, or الاستقرار, not discovered at the time of شهادة الإشغال.
Accreditation Agency as a Third Party: وكالة اعتماد كطرف الثالث is an agency operating a system for product accreditation, including product testing and quality control assessment.
Safety Confirmation Certificate: شهادة تأكيد السلامة is a certificate provided by the technical examiner to the insurance company upon completion of the project.
Violation Classification Regulations: لائحة تصنيف المخالفات is a list classifying violations of the Saudi Building Code and determining penalties.
Violation: المخالفة is any intentional or unintentional breach of the Saudi Building Code.
Violator: المخالف is any person violating the Saudi Building Code.
Dangerous Violation: المخالفة الخطرة is any violation that endangers lives or properties.
Public Services: الخدمات العامة are electricity, telephone, water, and sewage services.

Code Application Stages

The Saudi Building Code is applied in stages:

التصميم.
مراجعة التصاميم and التحقق من التصميم.
رخصة البناء: granted after coordination with الجهات ذات العلاقة.
المتابعة والإشراف during التنفيذ.
اكتمال المشروع and issuing شهادة الإشغال.
الصيانة and التشغيل.

Responsibilities

The designer is responsible for التصميم.
A third party is responsible for مراجعة التصاميم.
The municipal authority is responsible for رخصة البناء.
A supervising office is responsible for المراقبة/التفتيش المستمر.
The municipal authority is also responsible as جهة رقابية.

Objectives of The Saudi Building Code

حماية الأرواح والممتلكات.
ترشيد الاستهلاك of water and energy.
رفع الكفاءة

Advantages

Better building integrity to withstand natural disasters.
Fire prevention using fire-resistant building materials.
Maintaining public health by improving indoor environment.
Reducing electrical energy consumption and emissions.

Key Dates

The Saudi Building Code implementation schedule (Hijri calendar):

Phase 1: Until the end of Dhul-Hijjah, 1440 H: Government administrative buildings, high-rise buildings (towers - more than 23 m), hospitals, and hotels.
Phase 2: From the end of Phase 1 to the end of Dhul-Hijjah, 1441 H: Communications towers, industrial buildings and facilities, buildings less than 23 m, and high-risk buildings.
Phase 3: From the end of Phase 2 to the end of Dhul-Hijjah, 1442 H: Furnished apartments, lodges, residential buildings, and recreational facilities.
Phase 4: From the end of Phase 3 to the end of Dhul-Hijjah, 1443 H: Business buildings (airports, banks, television stations, post offices).
Phase 5: From the end of Phase 4 to the end of Dhul-Hijjah, 1444 H: All types of buildings classified within it.

Legal Framework

Royal Decree No. (M/43) dated 26/04/1438 H.
Amended by Royal Decree No. (M/15) dated 19/01/1441 H.

The Saudi Building Code aims to:

Ensure safety, public health, and protection from natural hazards.
Promote conservation strategies.
Ensure engineering code compliance.

Key References for the Saudi Building Code

Saudi Building Code (SBC 201).
Saudi Energy Conservation Code (SBC 600).
Saudi Electrical Code (SBC 401).
Saudi Fire Protection Code (SBC 801).
Saudi Residential Building Code (SBC 1101).
Saudi Structural Codes (SBC 300).
Saudi Health Codes (SBC 700).
Saudi Green Building Code (SBC 1001).
Saudi Mechanical Code (SBC 501).
Saudi Code for Existing and Historical Buildings (SBC 900).
Saudi Code for Swimming Pools and Health Resorts (SBC 1401).

Important Notes

This document is a "guiding manual" and should not replace referencing the Saudi Building Code for residential buildings (SBC 1101-1102).
In case of any conflict, the code texts are the primary reference.

Ministerial Resolution

The ministry (MOMRA) and الجهات ذات العلاقة may seek assistance from engineering offices and companies to perform tasks related to code application.

Regulations Executive

الجهات ذات العلاقة بتطبيق كود البناء

وزارة الشؤون البلدية والقروية والإسكان: Responsible for issuing land reports, building permits, monitoring أعمال التفتيش, approving the provision of public services, issuing شهادة الإشغال, and building a database of engineering offices.
وزارة الطاقة: Responsible for monitoring code application related to electrical works and energy conservation, and coordinating the تأهيل of engineering offices and contractors.
المديرية العامة للدفاع المدني: Responsible for monitoring code application regarding fire prevention and protection systems, and coordinating the تأهيل of engineering offices and contractors.
الهيئة السعودية للمواصفات والمقاييس والجودة: Responsible for accepting التفتيش الجهات within مجال الأعمال الـكود in specified by الهيئة.

Commonly Asked Questions

What does the insurance cover for the building? Refer to the Saudi Central Bank website.
Does the code require engineering offices to provide quantity tables for الفلل? The code doesn't require quantity tables, refer to the وزرة الشؤون البلدية والقروية والإسكان.
If the code is updated, can it be downloaded after purchasing the current code, or is it necessary to purchase the code again? If the code has already been downloaded, re-download to ensure acquiring the updated version without needing to purchase a new copy.
Are there approved guiding مخططات with applied the Saudi Building Code for residential buildings? Yes, you can view the guiding model for مخططات هندسية لفيلا منفصلة و الفلتين المتلاصقة من طرف او طرفين . These are non-binding instructional models.

متطلبات فحص التربة

الأرض

Is the soil lab accredited by SAC?
What mandatory information needs to be in the soil report?
Soil exploration (soil tests and sampling).
Lateral soil pressure, hydrostatic pressure, and insulation materials.
Is the soil classified as problematic soil?
Requirements for the durability of concrete and rebar according to exposure categories.

مخططات

Responsibilities

Contractor:

Must be aware of building systems.
Responsible for أعمال البناء violations of the approved مخططات.
Implementing fire protection works.
Complying with ملاحظات from المشرف office, جهة التفتيش, or مفتشي الجهات ذات العلاقة.
Cooperating with the المكتب الهندسي المشرف.
Notifying the المكتب الهندسي المشرف of the work schedule.
Purchasing the وثيقة التأمين.
Clearing the site after completing أعمال البناء.
Complying with environmental, health, and safety requirements.

Owner:

Contracting with a مصمم هندسي لعمل المخططات.
Contracting with a مشرف هندسي لمتابعة تنفيذ المشروع واستخراج شهادة أشغال.
Contracting with a مقاول بناء معتمد or مصنف لدى الوزارة لتنفيذ أعمال البناء والتشطيبات الخاصة بالمشروع، وإصدار شهادة الإشغال.

المكتب الهندسي المصمم:

استخراج القرار المساحي.
مراجعة البيانات الواردة في القرار المساحي.
or التعاقد مع احد الشركات المختصة بإعداد تقارير التربية.
إعداد المخططات وفق كود البناء.
رفع المخططات والتقارير الخاصة بالوقاية والحماية من الحريق.
أخذ الموافقات من الجهات المختصة وفقا لطبيعة المشروع.
إعداد جداول الكميات والمواصفات.
إدخال جميع بيانات رخصة البناء لألرض من خالل منصة بلدي.
إصدار فاتورة السداد الخاصة برسوم إصدار رخصة البناء.
استخراج الرخصة الإنشائية للمبنى.
اختيار المفتش الخاص إذا لزم المبنى لذلك.

المكتب الهندسي المشرف:

مراجعة الرسومات .
الإشراف على تنفيذ المشروع وفقا للمخططات.
رفع تقارير الإشراف خالل مراحل البناء ورفع شهادة إنهاء الأعمال والتقرير الفني .
العمل على إيصال الخدمات للمشروع (الكهرباء ، المياه).
تبليغ اﻷمانة / البلدية في حال وجود تنفيذ أعمال مخالفة للمخططات .المعتمدة.
إصدار شهادة إشغال المبنى والاحتفاظ بجميع سجلات التقارير والمستندات الخاصة بالمشروع

Architectural Design Standards

General Site Layout: Building موقع, utility lines, walkways, pavements, elevations.
Ground Floor Layout: Interior space usage.
First Floor Layout: Interior space usage.
Annex Layout: Interior space usage.
Side Layouts (2): Show finishes.
Longitudinal Stairway Section: Details elevations.
Window Details layout.
Doors Details Layout.
Show Surface type and the inclines, details of waterproof of Surface & Bathrooms and Rainwater details flow
Fire extinguisher locations in kitchens.
Ground floor layout shows the detectors of smoke.
First floor layout shows the detectors of smoke.
Annex layout shows the detectors of smoke.

Structural Design Standards

Materials and Constructional Standards and the Seismic data.
Axes According to the Architectural layout and the drawing of columns and its implementation table.
Layout for the ordinary and armed rules, necks of columns.
Layout of the girders and columns for the ground floor.
Structural layout for the roof of the ground floor.
Structural layout for the roof of the first floor.
A layout shows the structural details. for the annex ceiling and the design of the top for surfaces
General structural details table.
Structural layouts table [Columns, ceilings …etc.].

Electrical layouts

Material Standards for electrical layout.
Layout shows the earthing system.
Layout shows Ground floor with keys / sockets Distribution.
Layout shows first floor with keys / sockets Distribution.
Layout shows Annex floor with keys / sockets Distribution.
Layout shows Ground floor illuminates Distribution.
Layout shows first floor illuminates Distribution.
Layout shows Annex floor illuminates Distribution.
Layout shows Cables pass.
Layout shows electrical Calculations and Distribution.

Mechanical Layouts

Mechanical Design Standards.
Layout shows Ground floor with A/C units & Exhaust Fans.
Layout shows First floor with A/C units & Exhaust Fans.
Layout shows M floor with A/C units & Exhaust Fans.
Implementation layouts.
Tables of design calculations results in A/C & Exhaust fans.

Sanitary Layouts

Standards for sanitary acts.
Implementation layouts.
Public site layout shows water tank and sewage network.
Layout shows Ground floor with Sanitary networks.
Layout shows First floor with Sanitary networks.
Layout shows Annex floor with Sanitary networks.
The drawings of the layouts show, the pipes diameters, valves, taps, bowls and toilets and the capacity of the water heaters.

Energy Saving Layouts

Temperatures scales for the Site.
Describing the heath- isolates in Windows and the external doors.
Detailed sections for the walls with Thermal isolation.
Tables of the final Results for energy saving Calculations.

Building Permit

Refer to:

The Saudi Building Code for Residential Buildings 1101 SBC.
Manual for building permit procedures.

Building Permit Issuance

Submitting the building permit issuance request.
Validity of the building permit: 3 years from the date of issuance.
ًApplying for the building permit by the هندسي accredited office الكترونيا.

Types of Building Permits

Building Permit
Stage Before Issuing the Building Permit
- Choosing the classification of the license (residential building).
- Identifying the owner and the applicant.
- Selecting the master plan from which to obtain a building permit or fence.
- Selecting an accredited engineering consultant from Balady platform.
- Sending the request to the Engineering consulting office.

Requirements for the License

An updated title deed from the Ministry of Justice or a housing or investment contract.
Obtaining a survey report.
Contracting with an accredited engineering Consultant.
Paying the service fees.

Documents Required Loading on Balady Platform

Architectural plans in accordance with Saudi Building Code.
Elevation Image.
Location Sketch (sectional image from the structural layout showing the site).
Power efficiency Layouts.
Mechanical Layouts.
Soil Test Report.
Electrical Layout.
Structural Layout.
Title Deed.
Waste Removal Pledge.

The Phase After Issuing of the Permit

Contracting with a constructional authorized contractor at the ministry.
Buying of insurance document by the contractor.
Contracting with an authorized Engineering supervising Consultant at the ministry.
Notification of implementation starting through Balady platform.
Contracting with an inspector or an Inspection Authority for the buildings what requests this.

Building Implementation Works Phase

Supervision Business Requested: The Engineering supervising Consultant performs the supervising businesses during the building phases loaded on Balady platform according to the Requirements of Saudi Building Code and uploading the pertaining reports on Balady platform.

Building Works Completion Phase

Following the Completion of Building Works, As per the Licensing Documents

يقوم المكتب الهندسي المشرف برفع طلب استكمال
:. بيانات تقرير التفتيش النهائي على منصة بلدي
* شهادة إنهاء ومطابقة في مجال اﻷعمال الكهربائية وترشيد الطاقة من وزارة الطاقة.
* رفع تقرير تأكيد السلامة المعتمد من الفاحص الفني لشركة التأمين على منصة بلدي
* في حال الفلل السكنية (3R) ، يقوم المكتب الهندسي المشرف بإصدار شهادة اإلشغال من خالل منصة بلدي.

Licensing Procedures building restoration

The restoration license

Login to Balady platform through the national identity access (Nefath) . Select Building Licensing Services (Restoration license service).
View the guidelines and acknowledge the accuracy of the information . Select the Building License or title deed to which you want to extract the restoration license.
Select the Consultant office and enter the Required data.
Container Invoice
Guarantee to eliminate Rubbles.
After payment of the fees, the license will be issued and can be printed.

License Requirements

Building License
A technical report that shows Building situation and the desired Restoration elements Contract With an Engineering office

Abiding by The Buildings code (SBC 901) in Restoration works

Presenting a Waste Container
Payment of the Service Fees.

License Procedures Building Demolishing

Log into Balady Platform through Nafath .
From building License Services, select Demolishing License .
Determine owner type and Request provider.
Choose building License or the title deed required to Obtain Demolishing License .
Contracting with the Engineering consulting office.
Pledging of Building unpeople and animals free
Sending the request to the Engineering consulting office.
Clearing electrical , water and telecommunication services (If available) by the Engineering consultation.
A payment Invoice will be issued .
Payment of the Fees ,Issuing the License and Printing it .

License Requirements

An updated electronic title deed from the Ministry of Justice , or a Housing contract or an Investment venture.
Extraction of Space Reporting
Contracting with an Engineering Consultant authorized to the Ministry .
Payment of the Service Fees .

License Procedures Adding or Modifying Building Components

Login into Balady Platform through Absher
Select building licensing Services (Adding or modifying building Components Service .
Select the building License required to extract a building Components adding or Modifying for.
Selecting Engineering office (authorized Consultant
Or reverting it from the insurance in case of insurance available.
Selecting building Consultant or restoring it form the Insurance
Selecting the building contractor or restoring it form the Insurance
Engineering office will complete the data and prepare the requested Layouts .
After Payment of the Fees the license can be Provided /printed.

License Requirements

Contracting with Consulting office .
Abiding by the Standing Buildings Applying code ( SBC 901) to The new building Components addition or Modifying on to it.
Payment of the Service Fees

Procedures of License Issuance Of Building Situation Rectification

Entering Balady Website throughout the unified access (Absher).
Choosing Service of extant Building situation Rectification License Issuance.
Choosing Building License or the title deed required to extract extant Building situation Rectification License to it.
Choosing Engineering office .
The Engineering Consulting will complete the Data and prepare the Required Layouts .
The Ministry will calculate the fines and Penalties .
After Fees Payment ,The license can be issued /Printed

License Requirements

Contracting With an Engineering Consulting
Abiding by Applying the Extant Buildings code ( SBC 901) to The Correction woks done for the Building situation .
Fees Payment

Responsibilities and Powers of Municipalities

Reviewing the necessary land survey decisions.
Reviewing the architectural schemes or all schemes and models on residential building permits issued by the authorized engineering offices and verifying their compliance and the heights, indentations, building ratios, and parking requirements.
Monitoring and following up on the application of the Saudi Building Code.
Following up on the performance of التفتيش works and necessary tests during the أعمال تنفيذ of the building.
التفتيش and monitoring of the buildings under إنشاء and issued building permits from the engineering offices and making sure it complies with building regulations.
Issuing the occupancy certificate after completion of the building and confirming its compliance with the Saudi Building Code.
Keeping records of building permits, مراقبة, التفتيش, ضبط, and penalties.
Reviewing building reports for project phases issued by المشرفة engineering offices and sent through Balady platform.
Monitoring violations in accordance with the لائحة تصنيف مخالفات كود البناء السعودي concerning the municipal sector and the لائحة الغرامات والجزاءات عن المخالفات البلدية.
Stopping or canceling building permits that violate building regulations and the Saudi Building Code or at the request of the beneficiary.
Implementing stop requests for the building permit from الجهات ذات العلاقة.
Committees for deciding on municipal violations and violations of the Saudi Building Code.

Penalties for Violations

M	Violation	الجهة المصدرة	Class 3R	Severity	Action	Financial Penalty		*
1	Submission of مخططات or تصاميم and specifications or the structural calculation code-violating note as the license has been issued according to it.	Design office	-3R	Dangerous	- Building Stop

Re-submission of مخططات and تصاميم or the reports, bills of quantities, and specifications according to the code.
In The case Where there is no soil report or the soil-bearing capability choice from in the Table mentioned at the code , a number of trials in accordance with the Code shall take
place and the drawings with all structural loads shall be reviewed By Engineering Consultant in the same scope then accrediting office
in case of Repetition the Engineering office license will be stopped for 6 months Through Balady Platform |
ريال 5000/ | | *
| 2 | The issuance of building occupancy certificate despite the existence of building severe violations according code . | Supervising office | -3R | Dangerous | - prevention of occupancy and Hold شهادة اإلشغال temporarily until addressing violation-
Re-implementation of all works contrary to the code -
Preparation Of Consultant report to assure treatment code violation.
In case of Repetition, the Engineering office license will be stopped for 6 months Through Balady Platform |
ريال 7500/ | | *
| 3 | Relinquishing or the Engineer office (implementer) or part of the scope to non-specialized people in the Major | Supervising office - contractor | -3R | Not Dangerous | - Revision of The Executed Works by Supervision Consultant in the scope & - Issuing a status of compliance certificate or modifying works and being adhered to the report recommendations- Contracting with specialized peoples in the scope. | Supervising office:
ريال 2000/
contractor:
ريال 4000/ | | *
| 4 | Not being Committed by The Engineering supervising Consultant with sending of the building phases reports and notification During projects building in the Schedule dates. | Supervising office | -3R | Not Dangerous | - The office will be fined By /3000 ريال in Case of 1 report which special with reviewing drawings , and notification
of starting implementation-
the Engineering office will be fined By /1000 ريال on Other report not being sending
Preparation and sending of the requested Reports on /to Balady منصة | - /3000 ريال -
-/ 1000 ريال For each other report which not being sent
| *
| 5 | Not being Commited to The design , Accreditation or implementation , to implementing requirements of structural acts according code or implements building contravention for the license and the Accredited engineering Designs according code ,at the building or construction | Supervising office / contractor | -3R | Dangerous | Stop building work or or the part which has dangers or a risk. The Violation Applying code on supervisor and the contractor Removing the contravention parts and re-implementing the works according the code. | Supervising office
ريال 7500/
Contractor

ريال 10000/
| *
| 6 | Not being Commited By describing , Reliability and adoption to the main Material used ( Steel Strengthen or concrete ) do not complying. with Standard approved specifications . | Design office in the describing scope | -3R | Dangerous | - Stop building work or or the part which has dangers or a risk.
Re-describing or Reliability implementationMaterials According code The material has to
review The status , and the Violator Has to bear the responsibility. for the expense Removing or adjusting and Re-implementing By Approved Standard specification | Design office :
ريال 4000 /
Supervising office | *
| | | supervising office in the Reliability scope and sample authorization | 10000 ريال|
| | | Contractor in the Implantation Scope: | 8000 ريال|
| 7 | Not being Commited by describing , Reliability and adoption implementationfor the permanent and temporary electrical extensions or installations according code Does not complying With Standard approved specifications. | Design office in the describing scope | -3R | Dangerous | - Stop building work or or the part which has dangers or a risk.
Re-describing or Reliability implementationMaterials According code The material has to review - The Violator Has to bear the responsibility .for the expense Re-implementing by Standard specification | Design office :
ريال 3000/
Supervising office | *
| | | supervising office in the Reliability scope and sample
authorization | /6000RIAL
contractor In the Implantation Scope
/ RIAL 9000 | |
| 8 | Not complying With The desrcribiong Or reliability or implementation , And The general condition for materials of isolating the protected Building unit from the out side Rainy fall Water ,The surficial Water according code | Design office in the describing scope | -3R | Dangerous | Re-Implementing Or Accriding/Adopting to the Code ,The vilator have To bear the expense if the code have to reimplement | Design office :
ريال 2000/
supervising | *
| | | office /4000 RIAL ,
contractor /6000 RIAL | |
| 9 | Not complying With The desrcribiong Or reliability or implementation , And The General conditions and the technical Materials for he Heat isolate Materials For buildings according cord | Design office in the describing scope | -3R | Dangerous | Re-Implementing Or Accriding/Adopting to the Code ,The vilator have To bear the expense in addition that , Not allowing for electrical installation Building power-line | Design office
ريال 6000/
Supervising office /8000
Contractor/1000 | |
| 10 | Not Committing to design or description or dependence Or Implementation, the technical And Specific term for Mechanically And air conditioning designing and implementation And heaters and gas extended parts inside The Building accord The Code | Design office in the describing scope | -3R | Dangerous | Re-Implementing Or Accriding/Adopting to the Code ,The vilator have To bear the expense and Re implement that the building according code | Design office :
ريال 2000/
Supervising office /4000RIAl
Contractor/ RIAL 6000 | |
| 11 | Not Committing to design or description or dependence | Re-Implementing Or Accriding/Adopting to the Code ,The | Design office |
1000/
4
4
supersing office /2001RIAl
Contactior
. The vilator have To bear the expense and Re implement that
the building according code |
| Or implementation, the technical And Specific Term for building and implementation works Installments for water feedline and health equipment and rain Water outlet according The Code | Engineering /In describing and 2000 supervising
, /3000 ,
Contractort | |
|12| Not Committing to design or description or dependence Or implementation, the technical Terms. for smokes Detectors and Fire Extinguishers acceding Code | Design office /In description
Re-Implementing Or Accriding/Adopting code ,
The vilator has To bear the expense To re –Implementing and adopting accord building code | Design office
ريال ./750 Supervise
1500 RIAL
Contracting /
2250 RIAL | |
M The Violator must resolve The Situation to Accord the code In 90 Days .

TREATMENT For NON Dangerous CODE
Violation According the Code

each 1 00000 RIAL For each
.3R to 24 item s
Three Stories

The building can also be inspected by related parties.
Codes for the sector were also included.

Structural Frame (الهيكل الإنشائي)

حفر

Was the required عمق الحفر in the soil report reached?
Was a groundwater level reduction system designed and installed?
Were the replacement layers and recommended tests in the soil report implemented?
Were the foundations designed according to the soil pressure in the soil report?
Was the foundation type recommendation in the soil report exceeded?
Were the walls and buildings of the neighbors reinforced?
Was the construction site fenced?

Foundations

The provisions in (Chapter 7) must govern the design and construction of the foundations.
Construction must safely accommodate all loads and transfer the resulting loads to the supporting soil.
The total depth of the foundation must be selected so that the effective depth of the lower reinforcement is at least 300 mm.
It is forbidden to support foundations on compacted fill materials.
Concrete and reinforcement design properties must be selected to comply with the requirements of (Chapter A(4)).
The axes and locations of the columns shall be accordance to the approved مخططات to ensure achieving the terms of areas and dimensions of the gaps, and of indentations
Each home have be structurally independent in of أألساسات